Display data problem in MP

Hi all,
Infoset is included in multiprovider. There is a keyfigure which has 0calyear in exception aggregation.Infoset is displaying without any error. 0CALyear is already present in Multiprovider.
What could be the reason to display that error message.
When I am trying to display data of multiprovider, it is showing following msg InfoProvider "ZINFOMP" does not contain characteristic 0CALYEAR. The exception aggregation for
keyfigure can therefore not be applied.
Thanks in advance!

hi vivek,
plz go through the link and maintain the settings.
further issue on this,try to revert it back.
https://websmp203.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012006153200001735542002
regards,
meiy

Similar Messages

Display data problem

Hi all,
Infoset is included in multiprovider. There is a keyfigure which has 0calyear in exception aggregation.Infoset is displaying without any error. 0CALyear is already present in Multiprovider.
When I am trying to display data of multiprovider, it is showing following msg InfoProvider "ZINFOMP" does not contain characteristic 0CALYEAR. The exception aggregation for
keyfigure can therefore not be applied.But when I create a query on multiprovider,it is showing data properly.
What could be the reason to display that error message.

Change your query to display both Infoprovider & CalYear. Retry.

Problem with chart displaying data correctly

I have created a bar chart that displays data for each day of the month. The majority of the time this chart displays the information corrrectly. However now and again the bars of the chart appear much larger than they should meaning that instead of showing 30 or 31 seperate bars it can only display half that amount due to the increased size of the bars. If you display the same chart again then the problem will often disappear.
I am using Coldfusion MX 7 version 7.0.2 Enterprise Edition. Ihave installed all the latest updates up to Cumulative Hot Fix 3.

Hi,,
I have checked that the data being passed is correct and it seems to be. Chart code below.
Thanks
<cfchart chartwidth="700"
   chartheight="300"
   pieslicestyle="solid"
   show3d="no"
   showlegend="no"
   fontsize="12"
   xoffset="0.0"
         yoffset=".0">
<cfchartseries type="bar"
   query="chartquery"
   serieslabel="Date_Accessed"
   valuecolumn="namecount"
            itemcolumn="date_created">
    </cfchart>

Problems with displaying data in Chart

Hi, everyone
I am stuck with displaying data in Chart. I set the minimum
and maximum for LinearAxis of a LineChart, so the chart only
display the data within this range. But sometimes I still need to
keep the trend of all data even the data is out of range.
eg, the range of verticalAxis is 0 -100 and I got data 70,
120, 90. Neither I want to set the data 120 to 100 in order to keep
the data point nor make the data 70 connected directly to data 90.
All I want is to keep the shape, from 70 to 120, from 120 to 90,
but 120 doesn't display in the chart.
My another question is when I try to select an area of a
chart to zoom in, how can I the get the exact area that I select to
zoom,
for example: I want to use exactly the result of the
following line:
((firstMouseX - this.mouseX)/ this.dataRegion.width) *
chart.dataProvider.length
that is I don't want to use methods ceil or floor to get the
approximate area.
Excuse me, I got one question more. The weird things is my
chart won't resize itself when I resize the VDividedBox or other
containers. I set the width equals 100% wherever it needs to be.
Just like the Flex sample - dashboard. If I open a small window at
the very begining and then maximize the window, the chart still
keep the small part of its container. I don't understand why.
Sorry for too many questions.
Hope someone can help me.
Thanks in advance.

Can I use the Interpolate to solve the first problem?
But I have no idea about interpolate at all.
Please help!

Problem with displaying data's in a chart

I have a main VI (Hovedprogram) and 5 VI's (Ferdigprogram temp tur , Ferdigprogram temp retur, Ferdigprogram nivå, Ferdigprogram temp i fyr and Ferdigprogram trykk)who starts when I start the main VI.
I want to display data for last 15 seconds, last 24 hours, last week, last month and last year.
The problem is that the graphs for last week, last month and last year do not display all the data's. I just got a dot where I started the program 28.April. The graphs shows the data's from 2.May
Any suggestion how I can change my program to appear as described?
Attachments:
Hovedprogram.vi ‏748 KB

And here is one of the 5 VI's
Attachments:
Ferdigprogram temp retur.vi ‏125 KB

Problems Displaying data from RFC on Adobe Forms

Hi,
I have some Problems with creating an Adobe Form and hope, someone can help me or give me some hinds to some tutorials, which can help me.
I'm developing an webdynpro-application which get data from a R/3 via RFC-Call.
Context-Binding and so on is done and works. I created also an interactive form and can display some datas on it.
Here my questions:
I have an field 'unit' which shoulb be displayed on several positions onto the form. My problem is, i can display it only once. If i copy the field, there is no output in it. What can i do, to solve the problem?
From the RFC i get a table with several rows of data, i want to display on the form.
With drag&drop i can place the fields onto the form but they are displayed only once. I want one line for every row from the table.
What do i have to do? Are there tutorials which show the steps?
When I am not using a form, i can display the data from RFC in a table with no problems (i create a table ui and choose create binding from context menue). Are the nescessary steps for displaying the data on an interactive form the same.
I read something about creating a dynamic form design. Do i have to create it? What are the steps i have to do.
Many questions, but i hope that someone can give me some helpful hints.
Many thanks
Mathias Lange

Hi Mathias,
If I caught you correctly, you want to display data in Adobe forms in form of tabel, right?
So, follow the steps:
1. Insert one sub form on your adobe form.
2. Set its type as "flow content" in object->subform property.
3. Set flow direction as "Table".
4. Insert another subform inside this subform.
5. set its type as "flow content" and flow direction as "Table row".
6. Now, choose binding tab, and there check "repeat subform for each Data item check box" and specify min. count for your rows.
7. Now, insert your column fields inside this sub form once.
8. Format its look and feel as you want.
When you run this application, it will show you multiple data as table on Adobe form.
Regards,
Bhavik

Problem displaying data in Excel with Jsp

HI,
For some reason when i save data from jsp to excel, my Excel dont display data.This code was working fine from past 3 years all of sudden it starts givin this problem.
However When i open my .xls file in notepad i see data there. The problem is because of XML declaration (<?xml version="1.0" encoding="UTF-8"?> which parsed generate. If i remove this it works fine.
Out put in file looks like this
<?xml version="1.0" encoding="UTF-8"?>
<table border=1 width="100%">
<tr>
<TH>Name</TH>
<TH>Last Name</TH>
<TH>state</TH>
<TH>Country</TH>
<TH>Currency</TH>
</tr>
<tr>
<TD class="odd">John</TD>
<TD class="odd">Hayden</TD>
<TD class="odd">IL</TD>
<TD class="odd">USA</TD>
<TD class="odd">USD</TD>
</tr>
<tr>
<tr>
<TD class="odd">Ricky</TD>
<TD class="odd">Ponting</TD>
<TD class="odd">IL</TD>
<TD class="odd">USA</TD>
<TD class="odd">EUR</TD>
</tr>
</tr>
</table>
Jsp Code
String rptHTML = (String)session.getAttribute("ReportStrHTML");
     System.out.println(rptHTML);
     response.setHeader("Content-Disposition","attachment;filename=Test.xls");
     response.setContentType("application/vnd.ms-excel");
Thanks

In Excel, Tools > Macro > security > medicum and Trusted tab check To access VB.

Problem in Rough Cut Plan while displaying Date & the nbre of columns

Hi Expert,
During the creation of Rough Cut plan for material Trx MC87, the system display only one Column and the displayed date is 2012.
I Tried to extend the period by using the the button "page Right" and "page left" but there is no chance.
your support is highly suitable
Tsang

Hi dear,
I tried that but not working for me could you please investigate again in my request

Problem with displaying Date field in the table.

Hi All,
I am trying to display data into a table UI Element.
In that data, i have one DATE type field. While displaying data in DATE field, it will display like this "01.02.2009".
Now my requirement is if i want to modify that DATE field, it will allow to modify "01.02.2009" to "26.02.2009".
But while modifying DATE field , I want to show the Calender of that month, in that i have to select the another date.
(Like normal Date UI Element will show that calender).
Can anyone please help me.
Thanks in Advance!
Regards,
Sreelakshmi.

Hi,
Go to the context attribute that was mapped to the DATE field of the table and change the perperty INPUT HELP MODE to AUTOMATIC and it works.
Regards,
Manne.

Problem in displaying dates for replacement path with text variable

Hi all,
I have to display dates in sequence as descriptions for 15 columns based on the the date entered by the user in Bex Report.I managed to display date as description using text variable with replacement path for single column.I could not able to increment date for other descriptions.Could you please help me to solve this issue.Its urgent.
Ex: User enters 03/09/2007 then in the out put desciptions for the columns should be 03/09 04/09 05/09 ............ 17/09.
Thanks in advance.
Regards,
Mandadi.

Hi,
goto the properties of your KF and click on the variable button side to that of the description field and click on new/Create option.Enter the technical name description for the text variable and select Replacement path as the Processing type and in the nxt screen select Fiscal year as the replacement variable and in nxt screen specify as Key and provide offset values if necessary and click on finish.now select the variable by clickin on the variable button next to the description field.it comes after the description of the KF.Now run the query.
Thanks,
Sandeep

Problem displaying date

Hi,
I am trying to display date, the source code is:
code]import java.lang.*;
import java.text.*;
import java.util.*;
class Date {
public static void main(String args[]) {
Date date = new Date();
System.out.println("the date is:" + date.toString());
The output is: the date is:Date@187c6c7
I'm using Sun Java Studio Enterprise 8.1
Any guess? where i'm going wrong..

Hi,
I am trying to display date, the source code is:
e]import java.lang.*;
import java.text.*;
mport java.util.*;
class Date {
public static void main(String args[]) {
Date date = new Date();
ystem.out.println("the date is:" + date.toString());
ode]
The output is: the date is:Date@187c6c7
I'm using Sun Java Studio Enterprise 8.1
Any guess? where i'm going wrong..You ought not create a class with the same name as a class in the standard library (Date), and you need to provide a toString method that outputs what you want to output.
Good Luck
Lee

Multiprovider display data issue

Hello,
I'm using BI7.0 and created Multiprovider using Custom DSO and Infocube1.
the problem is, when i use display data through multiprovider, I'm not able to see data from DSO .
I have considered all common fields from DSO and Cube and assigned in multiprovider.
basically I'm selecting all IO and Keyfigures from Infocube1 and few IO from DSO
some reason I am not able to see data from DSO when i view data through multi provider.
Please help me to view data from both cube and dso through multi provider.
Thanks
Ganga

Hi Ganga,
Please check whether there is any restrictions for the field 0PROVIDER. There may be restriction to get the data only from cube.
If there is no any restrictions then here may be your problem.
You need to maintain atleast one key figure in both targets.
Since there is no any key fig coming from DSO
please create a dummy key fig and try to check once again.
please go through the link.
Re: MULTIPROVIDER NOT GETTING DATA
hope this helps u.
Thanks,
Sai Chand

Can't display data that exist in cupe

Hi All,
I get a problem which is thar even i entered data in the cube i cant display with charecteristics. When i go to bw and display data if i say select charecteristics i can see any data but if i dont select charecteristics i can display data. Also when i enter data and sen data it say succesful but i loose data on view. Have anyone get any problem like that thanks for your interest.
Kasim

Hi,
The code you sent appears to be the Audio Talkthrough example with several modifications. Here's the first thing I noticed that appears to be incorrect: You're using the BF AD1871 Wait on Data Ready Flag VI to fill the sub-buffer, then you go into a loop and get the contents of that buffer 256 times. You should be filling the buffer each time before you get the buffer instead of only filling it once. You also aren't resetting the data ready flag by using the BF AD1871 Clear Data Ready Flag VI.
Message Edited by Michael P on 07-28-2006 09:55 AM
Michael P
National Instruments

Not able to display data in separate columns using Unicode encoding

Hi,
Iam using Unicode encoding in my Java appln to support Japanese characters while downloading CSV report. But using the Unicode encoding displays all data in the first column of Excel sheet.
Please let me know how to display data in different columns using Unicode encoding in Excel sheet.
This is an urgent need. Please help me out.

Hi,
I have no problem with item :P15_EV_LCL this is having a value my probem here is i am using java script to display the value in different color based on the condtion case
eg:
select
case
TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2)
= :P15_EV_LCL
then
span style="background-color:lightgreen"
|| TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
else
span style="background-color:yellow"
|| TRUNC(
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
end "Effort"
from actuals Z
If i dont use this <Span style="Background-color:color"> i am able to generate data in excel sheet if i use this color coding i am not able to get data in spread sheet.
Please suggest
Thanks
Sudhir
Edited by: Sudhir_N on Mar 23, 2009 10:00 PM

Display data column wise in alv

my problem is i want to display data in column wise in alv grid display
for example it will display
Name1    Amount
GTS       12000
TSL        8970
MJB        4678
but i want like:
GTS    TSL    MJB
12000 8970 4678
Edited by: jadav_avani on Nov 15, 2010 8:33 AM
Moderator Message: Search for available information.
Edited by: kishan P on Nov 15, 2010 1:50 PM

my problem is i want to display data in column wise in alv grid display
for example it will display
Name1    Amount
GTS       12000
TSL        8970
MJB        4678
but i want like:
GTS    TSL    MJB
12000 8970 4678
Edited by: jadav_avani on Nov 15, 2010 8:33 AM
Moderator Message: Search for available information.
Edited by: kishan P on Nov 15, 2010 1:50 PM

Display data problem in MP

Similar Messages

Maybe you are looking for