Display Error Message in Co11n Transaction

Hello Experts,
I am using co11n transaction, While saving the transaction i need to display a
error message based on some conditions. I can display a error message but the screen got struck
and it is not returning to the PBO again. Can any one tell me the any Exits is available there in the transaction to display the error messages.
Thanks

Hai,
krupa, what u have to do is, u r using a screen exit right? Dont display the error message inside
the Function Exit. Instead, in the PAi module inside chain endchain of ur screen double click on your module and include the module in the TOPINCLUDE of the Main program( How to find this top include is goto se80-->
select function group XCOF--> EXPAND INCLUDE->LXCOFTOP -
>ZXCOFTOP----->DOUBLE CLICK and open it and put your module here and display ur error message. )
set the breakpoint here it will stop here
Regards,
Viverk
Edited by: vivek selvam on May 12, 2009 8:36 PM

Similar Messages

Display error messages in Call transaction

Hi Gurus,
I have donme BDC using call transaction..can anybody help me in displaying the error messages in call transaction..
A detailed code wud be very much helpful..
full marks wud given
regards
Sahil

hi check this,
PERFORM Z11_BDC_VA02.
      ELSE.
        MESSAGE I013 WITH TEXT-013.
      ENDIF.
ELSE.
          CLEAR V_FLAG.
       MESSAGE E012 WITH TEXT-012.
ENDIF.
FORM z11_bdc_va02 .
*COVER 1
perform bdc_dynpro      using 'SAPMV45A' '0102'.
perform bdc_field       using 'BDC_CURSOR'
                              'VBAK-VBELN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'VBAK-VBELN'
                              wa_head_detail-vbeln.
*COVER 2
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=T\03'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-MABNR(01)'.
*COVER 3
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ITNE'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-MABNR(01)'.
*COVER 4
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
perform bdc_field       using 'BDC_CURSOR'
                              'RV45A-KWMENG'.
perform bdc_field       using 'VBAP-MATNR'
                              wa_head_detail-matnr.
perform bdc_field       using 'RV45A-KWMENG'
                              v_kwmeng.
perform bdc_field       using 'VBAP-VRKME'
                              wa_head_detail-meins.
*COVER 5
perform bdc_dynpro      using 'SAPLSPO2' '0101'.
perform bdc_field       using 'BDC_OKCODE'
                             '=OPT1'.
call transaction 'VA02' using it_tab1 mode 'A' UPDATE 'S' MESSAGES INTO
IT_TAB_ERROR.
"CAlling transaction with all screen
Loop at it_tab_error.
if it_tab_ERROR-MSGTYP = 'E' .
clear v_flag.
message I014 with TEXT-014.
else.
clear v_flag.
message I019 with TEXT-019.
endif.
endloop.
refresh it_tab1.
clear V_KWMENG.
ENDFORM.                    " z11_bdc_va02
Reward if helpful,
Gaurav J.
Edited by: GAURAV on Feb 4, 2008 9:10 AM

How to display error message ??

Hi,
I have a BDC program to upload data from an excel sheet. I could see that some records of data fail to pass and hence after my bdc run i would like to display error message for the failed records as follows:
costcenter:
cost element:
fiscal year:
etc etc
is it possible ?? how to do that ? please explain in detail.
for ur reference my program is pasted below.
thanks
*& Report ZBDC_BUDGET_UPLOAD
REPORT ZBDC_BUDGET_UPLOAD.
types: begin of tdata,
         rec(150) type c,
       end of tdata,
       begin of tmtgp,
         costcent LIKE CCSS-KOSTL,
         costelem LIKE CCSS-KSTAR,
         fisyear LIKE CCSS-GJAHR,
         jan(10),
         feb(10),
         mar(10),
         apr(10),
         may(10),
         jun(10),
         jul(10),
         aug(10),
         sep(10),
         oct(10),
         nov(10),
         dec(10),
       end of tmtgp.
data: idata type table of tdata with header line.
data: imtgp type table of tmtgp with header line.
Data : fieldval(10) type c.
selection-screen begin of block b1 with frame title text-001.
parameters: p_file type localfile default 'C:\budget_data_csv.csv'.
selection-screen end of block b1.
include zbdcrecx1.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
        exporting            static    = 'X'
        changing            file_name = p_file.
start-of-selection.
perform upload_data.
loop at imtgp.
Write imtgp-fisyear to fieldval.
perform open_group.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(04)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'KPP0B-VALUE(04)'
                              fieldval.
Write imtgp-costcent to fieldval.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(06)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'KPP0B-VALUE(06)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(09)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-costelem to fieldval.
perform bdc_field       using 'KPP0B-VALUE(09)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(04)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CSPB'.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-jan to fieldval.
perform bdc_field       using 'Z-BDC03(01)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-feb to fieldval.
perform bdc_field       using 'Z-BDC03(02)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(03)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-mar to fieldval.
perform bdc_field       using 'Z-BDC03(03)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(04)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-apr to fieldval.
perform bdc_field       using 'Z-BDC03(04)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(05)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-may to fieldval.
perform bdc_field       using 'Z-BDC03(05)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(06)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-jun to fieldval.
perform bdc_field       using 'Z-BDC03(06)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(07)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-jul to fieldval.
perform bdc_field       using 'Z-BDC03(07)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(08)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-aug to fieldval.
perform bdc_field       using 'Z-BDC03(08)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(09)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-sep to fieldval.
perform bdc_field       using 'Z-BDC03(09)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(10)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-oct to fieldval.
perform bdc_field       using 'Z-BDC03(10)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(11)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-nov to fieldval.
perform bdc_field       using 'Z-BDC03(11)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(12)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-dec to fieldval.
perform bdc_field       using 'Z-BDC03(12)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(12)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CBUC'.
perform bdc_transaction using 'KP06'.
perform close_group.
endloop.
form upload_data.
data: filename type string.
clear idata.
refresh idata.
filename = p_file.
call function 'GUI_UPLOAD'
    exporting            filename        = filename
    filetype        = 'ASC'
    tables            data_tab        = idata
    exceptions            file_open_error = 1
    file_read_error = 2
    no_authority    = 6
    others          = 17.
    check sy-subrc = 0.
    loop at idata.
    clear imtgp.
    split idata at ',' into imtgp-costcent imtgp-costelem imtgp-fisyear
imtgp-jan imtgp-feb imtgp-mar imtgp-apr imtgp-may imtgp-jun imtgp-jul
imtgp-aug imtgp-sep imtgp-oct imtgp-nov imtgp-dec.
    append imtgp.
    endloop.
endform.

check the below code,.,
DATA : t_bdcmsgcoll TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
CALL TRANSACTION '<DELIVERYTRANSACTION>' USING t_bdctab
                          mode 'N'
                          MESSAGES INTO t_bdcmsgcoll.
DESCRIBE TABLE t_bdcmsgcoll LINES g_lines.
READ TABLE t_bdcmsgcoll INDEX g_lines.
IF t_bdcmsgcoll-msgtyp = 'S' AND
     t_bdcmsgcoll-msgid = <Msg id> AND
     t_bdcmsgcoll-msgnr = <Msg number>.
* Trap your Call Transaction messages
    t_success-deliverynumber = t_bdcmsgcoll-msgv1.
* You can format the message returned by call transaction using function 'FORMAT_MESSAGE' which will return g_mesg
    t_success-message = g_mesg.
    APPEND t_success.
    CLEAR t_success.
ELSE.
* If there an Error-Do this..
    READ TABLE t_bdcmsgcoll WITH KEY msgtyp = 'E'.
    IF sy-subrc = 0.
* Format your message using FORMAT_MESSAGE "FM
     CLEAR g_mesg.
     t_error-msg   = g_mesg_incl.
     APPEND t_error.
     CLEAR t_error.
   ENDIF.
ENDIF.
* Clear for next run
CLEAR: t_bdcmsgcoll,
         t_bdctab.
REFRESH: t_bdcmsgcoll[],
           t_bdctab[].

Regarding error message from a transaction

Hello all,
      I have a scenario where i need to collect all the error message from a trasaction and display it in a pop up.
      i am calling a function module and inturn calling transaction 'FB08' using bdc. i may get one or more error message. if there are more than one messages from my function module then i need to display this messages in a popup.
    Currently i am displaying one message using 'message ID' syntax at the bottom. what should i do to display error messages in a popup if there are more message
Thanks,
Raju N.

use following fm.
CALL FUNCTION 'COPO_POPUP_TO_DISPLAY_TEXTLIST'
      EXPORTING
      TASK             = 'DISPLAY'
        titel            = 'Creation Log'
    IMPORTING
      FUNCTION         =
      TABLES
        text_table       = i_documents_log.

Error message in ME22n transaction

Hi All,
We want to display error message at status bar of me22n transaction for some certain conditon.I am using a user exit where actually i am writing a code.I tried to write like this 'Message E101(ZE) ' but message is not displaying at status bar.
Thanks
Mohit

Hi ,
1 >If message is not getting shown at status bar then is it getting shown as popo up. ?
2 > If message is not at all getting shown then that means your exit is not getting called. Please put a break point inside your exit and exeute me22n and see if your debugger gets triggered.
If Debugger does not get triggered then that mean , either you have not created Project for yoour Exit OR you are using incorrect Exit.
Please revert with your observatins so that can help you further.
Hope this is helpful.
Regards,
Uma Dave

A way to display error messages from the program

Dear all,
I am looking forward to display a set of error messages(in a internal table) during the execution of the program to the user.
I wanted to know the better way of displaying error messages from my program with more options.
Well I tried out using displaying errors as ALV list/Grid or as simple list processing.
But I found some stanadard transactions (Like in MM and FI where errors are shown in a better way, but failed to find out how they are done.
Please guide me.
Thanks in advance
Aryan

Try to use application logging it has a very good way to display a set of messages.
[http://abap4.tripod.com/Using_Application_Logging.html|http://abap4.tripod.com/Using_Application_Logging.html]
Run this report in se38 an example sap report to understand logging way to show a set of messages
Report Name : SBAL_DEMO_01
Edited by: Vighneswaran CE on Dec 19, 2010 3:01 PM
Edited by: Vighneswaran CE on Dec 19, 2010 3:11 PM

Display error message as as status message on the screen

Hi all,
How to display error message as as status message on the screen
The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it leave the current transaction.
if i display success message and use display like 'E' it display the error message but if i save it save the transaction.
i cannot use leave to screen also because of subscreen. if i use leave to screen system display set screen not allowed in subscreen.
so i want to stop the processing or do not allow the transaction to complete on the message.

Hi
displaying error message like status message will help u?
try the below code
MESSAGE 'Error' TYPE 'E' DISPLAY LIKE 'S'.
cheers
shibu

Displaying error messages from application log

Hi,
I am using the function module RV_DELIVERY_CREATE for creating delivery in my program. If the sy-subrc is not zero i.e if delivery is not created, i have to display error messages collected inside the application.How can i do this ?
The object nd subobject are existing in SLG0 but when i
tried to see the object and subobject in SLG1 transaction , no logs were found.
Do we need to activate the object and sunobject somewhere before logging can take place??
I am using the following code in my program to display the logs but it is displaying no logs found:
CALL FUNCTION 'APPL_LOG_SET_OBJECT'
      EXPORTING
        object                    = 'ZCH_SCL'
        subobject                 = 'DL'
LOG_HANDLE                = ' '
NO_LOG                    = ' '
EXCEPTIONS
OBJECT_NOT_FOUND          = 1
SUBOBJECT_NOT_FOUND       = 2
OTHERS                    = 3
      IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
CALL FUNCTION 'APPL_LOG_INIT'
EXPORTING
OBJECT                    = 'ZCH_SCL'
   SUBOBJECT                 = 'DL'
LOG_HANDLE                = ' '
EXCEPTIONS
OBJECT_NOT_FOUND          = 1
SUBOBJECT_NOT_FOUND       = 2
OTHERS                    = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
      PERFORM z_call_rv_delivery_create. " to call fm rv_delivery_create
      IF sy-subrc ne 0.
        CALL FUNCTION 'APPL_LOG_DISPLAY_INTERN'
EXPORTING
    object                               = 'ZCH_SCL'
   subobject                            = 'DL'
   title_list_screen                    = 'Error Logs'
COLUMN_SELECTION                     = '11112221122   '
COLUMN_SELECTION_MSG_JUMP            = '1'
EXTERNAL_NUMBER_DISPLAY_LENGTH       = 20
I_S_DISPLAY_PROFILE                  =
IMPORTING
NUMBER_OF_PROTOCOLS                  =
EXCEPTIONS
OBJECT_NOT_FOUND                     = 1
SUBOBJECT_NOT_FOUND                  = 2
OTHERS                               = 3
thanks,
vartika

Hi Vartika,
you need to save that log after creating and appending to it.
here is a code to save that log.
If log created, save to database
if e_bal_hndl is not initial.
    refresh: bal_hndl.
    append e_bal_hndl to bal_hndl.
    call function 'BAL_DB_SAVE'
      exporting
        i_client         = sy-mandt
       i_in_update_task = 'X'
        i_t_log_handle   = bal_hndl
      importing
        e_new_lognumbers = log_no
      exceptions
        log_not_found    = 1
        save_not_allowed = 2
        numbering_error = 3
        others           = 4.
u have to write this code after appending info to Log.
hope this will help.
regards,
vikas

How do i get data when displaying error message in BDC

hi,
I have generated one internal table for displaying error message using BDCMSGCOLL, i want the the error to display according to the field name,
Hw can i get it...
ex: <Material name> Error message as name already created or unit doesnt exit...
Pls reply,
Regards,
Divi.

Hi Divya,
Try the below
CALL TRANSACTION 'MM01'
                    USING bdcdata
                    MODE   'N'
                    MESSAGES INTO MSGTAB.
IF SY-SUBRC NE 0.
move itab-matnr to jtab-matnr.
append jtab.
PERFORM CHECK.
ENDIF.
FORM CHECK.
LOOP AT MSGTAB where msgtyp = 'E'.
read table jtab index sy-index.
write:/ jtab-matnr.
CALL FUNCTION 'MESSAGE_PREPARE'
EXPORTING
    LANGUAGE                     = sy-langu
    MSG_ID                       = MSGTAB-MSGID
    MSG_NO                       = MSGTAB-MSGNR
   MSG_VAR1                     = MSGTAB-MSGV1(50)
   MSG_VAR2                     = MSGTAB-MSGV2(50)
   MSG_VAR3                     = MSGTAB-MSGV3(50)
   MSG_VAR4                     = MSGTAB-MSGV4(50)
   IMPORTING
   MSG_TEXT                     = L_MSG
EXCEPTIONS
   FUNCTION_NOT_COMPLETED       = 1
   MESSAGE_NOT_FOUND            = 2
   OTHERS                       = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE:   L_MSG.
ENDLOOP.
ENDFORM.
- Satish

Error message "no accounting transaction variant assigned for FB60//GL"

Hi Friends,
I created a new document type for GL postings in ECC 6.0. I tried to post a document for this document in FB60.. It displays the error message "no accounting transaction variant assigned for FB60//GL". Can anyone help me solve this problem.
Thanks
Ramya

You need to do the settings as follows:
Go to extended document splitting- define business transaction variant
Here u need to do series of settings.
Pl check your settings here

Display error message in batch job log

Hello
I have a batch job running and I have an error coming during some validation logic.
The problem is I need to continue the batch job when this error message comes and it should not cancel the batch job as it is doing currently but display that error message in batch job log, there are more similar error messages coming in job log and job gets finished, but when my error message comes job gets cancelled.
I cannot give it as info message as it will give wrong idea about message type.
Is there any FM by which we can add message in job log?

Sanjeev I have done that but problem is I do not want to give that as Information message but Error message only and continue processing.
If you see in screenshot 3rd message is given by me as information and you can see error messages also 6th and 7th and job continued till it is finished
Basically I want that 'I' to be displayed as 'E'.
Display error message in batch job log

Prb display error message while creating PR at ME51n in ME_PROCESS_REQ_CUST

Hi All,
I have this requirement to check the cost center availability in PR screen (ME51n).
If cost center in the Account assignment tab is not empty, display error message and not able to create the PR.
With my code below, it doesn't triggered the error message and PR created.
Could anyone help?
METHOD if_ex_me_process_req_cust~process_account.
DATA: w_account_ref TYPE exkn.
w_account_ref = im_account_ref->get_data( )
IF w_account_ref-kostl IS NOT INITIAL.
MESSAGE e303(ME) WITH text-001 w_account_ref-kostl text-002.
ENDIF.
ENDMETHOD.
Thank you.
SW

Hi,
You have to use definition MMPUR_MESSAGE 'E' ME 303 text-001 w_account_ref-kostl text-002.
This will throw the error during check and save instead of message e303(me) .
Hope it helps.
Sujay
Edited by: Sujay Venkateswaran Krishnakumar on Oct 5, 2010 2:54 PM

Displaying error messages in table...

Hi All,
How can we display error messages in a table in a bsp page.
I am filling an internal table in OnInputProcessing on some event with all the error messages to be displayed.
Table sould have two columns
1)Graphic depending on error type.
2)Error message.
Thanks,
Anubhav.

Hi Graham,
The solution is perfect!
One more thing...when the page is displayed with errors table , i need to set focus on the table.
My code is:
<htmlb:gridLayoutCell columnIndex="1" rowIndex="1" id="fourthmain">
<% if itab_message is not initial .%>
<table class=""urGridLayout" border="1" cellpadding="2" id="err_tab">
    <%
loop at itab_message into wa_message.
    %>
    <tr>
    <td class="urCoB2Whl">
    <% case wa_message-typ.
      when 'S'. %>
      <htmlb:image src = "ICON_MESSAGE_INFORMATION" />
      <% when 'error'. %>
      <htmlb:image src = "ICON_MESSAGE_ERROR" tooltip="Error" />
      <% when 'W'. %>
      <htmlb:image src = "ICON_MESSAGE_WARNING" />
      <% when 'I'. %>
      <htmlb:image src = "ICON_MESSAGE_INFORMATION" />
      <% when 'A'. %>
      <htmlb:image src = "ICON_MESSAGE_CRITICAL" />
      <% endcase. %>
    </td>
    <td><font size="2" face="Times">
    <%= wa_message-msg%>
    </font>
    </td >
    </tr>
    <%
endloop.
    %>
    </table>
<% refresh itab_message. %>
<% endif. %>
      </htmlb:gridLayoutCell>
I tried using
<phtmlb:focusRect focusElementId="err_tab"/>
and also:
<s cript="text/javascript">
daument.farm.elementid.focus();
</s cript>
But failed...pls help me out.
Thanks,
Anubhav.

Not able to display error message in PR creation.

HI Experts,
In PR creation process i am not able to display error message.
BADI: ME_PROCESS_REQ_CUST
method : PROCESS_ACCOUNT, PROCESS_ITEM
I have used Include mm_messages_mac for handling error .
MESSAGE e112(XXX) WITH XX-XX. this is my error message.
even tried this also mmpur_message 'W' 'ZMM_PUR' '001' '' '' '' ''.
Please provide solution for this.
Regards,
Jayant

Hi,
In devepoment system im able to display the message but not in quality,code is 100% algined with quality.
In quality system error message is being executed but not displayed,i mean control is comming out after the error message.
i am using
message EXXX(XXX).
regards,
Jayant.

How To Display Error Message In Self Service Page

Dear All,
I am using 11.5.10 Oracle HRMS self Service ,,,
How can I display error message on the top of the self service page if some action happen ?
Best Regards

Time entry rules maybe?

Display Error Message in Co11n Transaction

Similar Messages

Maybe you are looking for