Display error message as as status message on the screen

Hi all,
How to display error message as as status message on the screen
The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it leave the current transaction.
if i display success message and use display like 'E' it display the error message but if i save it save the transaction.
i cannot use leave to screen also because of subscreen. if i use leave to screen system display set screen not allowed in subscreen.
so i want to stop the processing or do not allow the transaction to complete on the message.

Hi
displaying error message like status message will help u?
try the below code
MESSAGE 'Error' TYPE 'E' DISPLAY LIKE 'S'.
cheers
shibu

Similar Messages

  • Hello, I received a message to set my icloud and the screen went blank, the computer will reboot and now asks me for a PIN code unknown to me, what should I do?

    Hello, I received a message to set my icloud and the screen went blank, the computer will reboot and now asks me for a PIN code unknown to me, what should I do?

    It has been remotely locked by the owner, or by someone who knows the owner's Apple ID and password.

  • HT1766 my ipad mini has a message that states that this device is not backed up. Backups happen when this ipad is plugged in, locked, and connected to wifi. this message wont go away from from the screen no mater how many times i press ok, as a result i c

    My Ipad mini has a message on the screen which says 'this ipad hasnt been backed up. Backups happen when this ipad is plugged in, locked, and connected to wifi. This message does not dissapear no mater how many times i press ok, as a result i cannot do anythingon the ipad.

    Thank you very much that worked !/4.5.6/images/emoticons/happy.gif|_mce_src=/4.5.6/images/emoticons/happ y.gif|___jive_emoticon_name=happy|jivemacro=emoticon|class=jive_macro jive_emote|src=/4.5.6/images/emoticons/happy.gif!

  • Good morning, I've try to update the software from my IPad, and suddenly I got the the message to conect to Itunes on the screen. I have conected to Itunes and it say I have to restore my Ipad in order to use ITunes and if I restore it I will lose all the

    I've try to update the software of my IPad from my IPad.  Suddenly I got the message to conect it to iTunes, so I have connected to ITunes and in order to use ITunes I need to restore the IPad and I will lose all thee data from my Ipad (pictures, music, etc).
    My IPad is block now with the ITunes message on the screen and I can not get it off.
    HELPPPPP, thank's

    And there is no other way to do it? I can't believe I will lose all data.
    I used to do all the software updates with the IPad not using ITunes.

  • TS4009 A message "iCloud backup" popped up on the screen, and the iPad freeze, how to trouble shoot.

    A message "iCloud backup" appeared on the screen, and I could not run applications anymore on my iPad.  Please help.

    Just sorted this problem - hold down Sleep and Home buttons until apple sign appears - after about 15 secs. Thereafter use a normal and iPad unfreezes.  I backed up on iCloud afrer "recovery".  Good luck. 

  • How can I show status clock on the screen

    hi,
    how can I add the status bar clock on the bottom left side of the screen when in progress.
    kind regards,
    Faisal

    You need to insert this FM in between your appropriate
    code in Start-of-selection event. Please use text elements for the text and if possible PERFORM and FORM with Using parameters.
    call function 'SAPGUI_PROGRESS_INDICATOR'
         exporting
              percentage = 20
              text       = 'Extracting Prepress Materials'.
    call function 'SAPGUI_PROGRESS_INDICATOR'
         exporting
              percentage = 40
              text       = 'Extracting Finished Goods Material info'.
    call function 'SAPGUI_PROGRESS_INDICATOR'
         exporting
              percentage = 60
              text       = 'Extracting Prepress orders'.
    call function 'SAPGUI_PROGRESS_INDICATOR'
         exporting
              percentage = 65
              text       = 'Extracting Order Status and Longtext'.
    call function 'SAPGUI_PROGRESS_INDICATOR'
         exporting
              percentage = 80
              text       = 'Extracting Sales orders'.
    call function 'SAPGUI_PROGRESS_INDICATOR'
         exporting
              percentage = 85
              text       = 'Extracting FG orders'.
    call function 'SAPGUI_PROGRESS_INDICATOR'
         exporting
              percentage = 90
              text       = 'Build list and filter'.
    call function 'SAPGUI_PROGRESS_INDICATOR'
         exporting
              percentage = 95
              text       = 'Display Output'.
    Edited by: senthil kumar on Oct 28, 2008 9:39 PM

  • Displaying error page when not entitled to use the portal

    Hi,
    We are using BEA Portal 8.1 and would like to display an error page to a user
    who is authenticated but not entitled to view any of the portal resources. Does
    anyone know how to do this?
    Here are more details:
    Users are authenticated by Netegrity Siteminder when they logon to the LAN. An
    authenticated user may or may not be entitled to use the portal site depending
    on attributes passed in the header by netegrity. These attributes values are stored
    as user profile properties. Visitor entitlements have been created based on these
    properties and pages/portlets are then entitled through these visitor entitlement
    roles.
    If a user is not a member of any roles, then they should be redirected to a page
    indicating that they do not have permission to access the portal. Howe can this
    be implemented?
    Thanks.

    Hi Lilybiri,
    Thanks for your quick response. I followed your suggestion and verified my Adobe ID on acrobat.com.
    Now I can enter the collaborate function. However, everytime when I tried to send it to myself (for test purpose) I got another error message "You need to enter a valid emaill address". I saw someone else on this forum has met the same problem. Do you have any suggestion on what is the possible reason for this to happen?
    Again, thanks for the fast response. You have been helping me and other ppl so much.

  • When I go into my email account through Safari, I cannot see all of my messages.  26 may show on the screen but it says I have 32.  However, at the bottom right it appears as if all the messages are showing and the arrow to get more is not highlighted.

    When I go to my email account through Safari, I cannot see all of my messages.  It says there are 34 but I can only see 26.   However, at the bottom right  the arrows to go to the next screen are not highlighted?  I also cannot scroll any further down.  Does anyone know how to scroll down to see all of my messages?  I use Travel-net Communications as my email provider (Ottawa, On, Canada).

    hey ,
    if it is showing you 34 mails them it is correct. when you see your mail. apple has a smart way of arranging your mail.suppose you recieve 4 mails from one email id it will show you under one highlighted mail. so when you open a mail from anyone trying scrolling it down and you will find your missing mails.

  • I updated to ios and my messages are now being previewed on the screen, how do i stop this?!

    Hi! I downloaded the IOS 5.0.1 reluctantly last night, and have had no luck since! I've only just managed to get my phone to start syncing my music. However, my messages now preview on screen (i changed before syncing so i could read any messages without interupting the sync) and i cant seem to change it back, please help! thanks a lot! xxxx

    Try This...
    Settings > Mail > Preview > Select None
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Why do we need a Outlook message header that takes up half the screen and how do we get rid of it?

    Tad Anderson

    This is a joke, when is this going to be fixed?
    We are in the 21st Century, MS is the world's leading software company, we are at the peak of human development, technology and knowledge - and yet someone thinks it is OK to waste 50% of our very expensive standard computer screens with junk!! I am
    partially sight-impaired and I need as much text space as possible. It took me a long time to be able to afford my new ultrabook with 365 and now it is near impossible for me to communicate with the outside world. What were you thinking? Please advise when
    this will be fixed? Mark

  • My iPod touch 5 don't tell me when I get a new message or any kind of notification the screen stays black and you can't even hear the sound . I have already tryed going to settings notification to turn every apps on . HELP me please !

    I have tried going in my notification and turning my apps on .

    Perform a Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • When I click on itunes store it displays it for a few seconds and then the screen goes blank?

    When I click on the itunes store the info appears for a couple of seconds and then the screen goes blank.  I never had this problem before any ideas?

    same thing with me have you found an answer? the only thing i cant think of is to download the new itues but when i try they are haveing problems with the site or something and i cant dowload it.

  • All of a sudden today, eBay's site displays in a narrow column about 20% of the screen while all other sites look OK and eBay runs right on Internet Explorer.

    Described in question

    Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.
    You can check the properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Command+B on Mac).
    In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.
    Make sure that "Load this bookmark in the sidebar" is not selected.
    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    *Use a compressed image type like PNG or JPG to save the screenshot
    *Make sure that you do not exceed the maximum size of 1 MB

  • Daylight Saving appears to be causing an hour of Status Messages not to be displayed in the console

    The Site Status - status message summarizer correctly enumerates the number of Errors, Warnings and Information status messages, however when a Site is selected and Show Messages context menu option choosen, the resulting status messages start
    from 1:00am onwards. This behaviour first started occuring after daylight savings.
    Time zone on Primary and SQL server are set correctly and the time is correct.
    The Status Viewer options "Display time in selected timezone" is set correctly.
    Any help greatly appreciated.

    Yes, I know this is an old post, but I’m trying to clean them up.
    Without your PowerShell script is will be impossible for anyone to answer this.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • IChat will not display status messages.

    I'm having a problem - iChat will not display any "available" status messages. All away messages display properly, but any unique status messages will not display, nor does the word "available". I have restarted both iChat and my MacBook several times, deleted the com.ichat.AIM preferences file, but it seems nothing I do will make my buddy's unique status messages display.
    I did not previously use Chax but downloaded it to see if it would help; it didn't. I'm willing to delete it if it will solve my problem.
    Any help?
    Thanks!
    Message was edited by: Paperclippe

    Ok,
    As you either suspected or found out the Saved Status Messages are in com.apple.ihat.plist
    The fact they didn't display would suggest that they may have become corrupted and the deletion of the .plist would have helped.
    BUT you went on to mention that the Available Choice also does not display.
    This would suggest one of two things.
    1) Either you are not fully Logged in to the AIM servers properly
    Do your Buddies see you are On-line and Available ?
    Do they perceive your Status change ?
    Can you Text chat to people ?
    Can you send files or Pic in Text chats ?
    Try Deleting com.apple.ichat.AIM.plist and restarting iChat to see if that helps
    2) Something about iChat or it's support folders (the bits that make the Available show up), that are at fault.
    In this case try deleting com.apple.ichatAgent.plist
    This controls which accounts login and help the app to run some of the features such as the Video/Audio part and Text Messaging.
    I would do these one at a time just so you know which it was that fixed it.
    8:27 PM Friday; June 20, 2008

Maybe you are looking for