Display extra information in entity header of the relational model
Hi,
Is there a way to display extra information in the header of the entity, next to the table name.
Ex : each table in my model has a distinct object id. Right now I enter this info in the Dynamic Properties (Name = OBJECTID Value = 710). It would be really practical for me if that OBJECTID would appear in the relational model diagram.
Thanks.
No, it's not possible
Philip
Similar Messages
-
Fwd engineering entity name changes to relational model?
I changed an entity name in my logical model after generating a relational model. But, I cannot figure out how to have SDDM (3.0.0.665) propagate this change to the relational model.
In the Engineer To Relational Model screen, if I select the changed entity from the tree view, in the Details pane there is a "Selected" check box next to the Name property (this line shows the discrepancy between logical name and relational name) but I can't check it. Under the Compare/Copy Options tab in that same dialog, the check box next to Name is checked. But, when I forward engineer the name is not changed.BTW I just noticed that if I enable "Name Translation" then it seems to work. This is not at all intuitive or obvious, nor does it seem to be explained in the documentation.
According to the help:
Apply Name Translation: Controls whether formal names are translated to abbreviated names when the logical model is forward engineered to a relational model, and whether abbreviated names are translated to format names when a relational model is reverse engineered to the logical model. Name translation is applied only for valid names. In addition, translations between the words entity/attribute/key and table/column/index are performed. -
Problem with naming of FK attribute when generating the relational model
I'm usign Data Modeler 4.0 and I have a problem when I engineer from Logical model to Relational model.
I have a table SUBJECTS with an unique identifier called ID (pk) and a table BOOKS related to SUBJECTS with a relation named FK_SUBJECT_BOOK and FK attribute named ID_SUBJECT.
When I engineer to Relational Model, it transforms the original FK attribute ID_SUBJECT of the Logical model into an attribute called SUBJECTS_ID in the Relational model.
How can I mantain the name defined in the Logical model also in the Relational model, without using abbrevation and without applying name translation when generating the relational model?
Thank youI have already tried it. The problem is that if I check the option you mention, then it uses the pk as it is in the related table creating attributes like ID1, ID2, ID3 and so on for all the relations you have.
-
Renaming Foreign Keys in the Relational Model
Hi,
I'm new to Data Modeler, we are using v 3.0.0.66.5 and Oracle 11g, and I'm trying to build a Logical and Relational model for a new application.
We always name our Primary Keys as ID, this is causing me a problem with my Foreign Keys names in the Relational Model, as they are showing as ID#. Is there a way to add the abbr. of the table to the Foreign Key?
Thanks in Advance
SueI always do that job using Naming Standard Templates. This sequence renames ALL FK COLUMNS for ALL TABLES only in RELATIONAL MODEL:
-Preferences > Data Modeler > Naming Standards > templates
-into the box "Column Foreign Key"
-Put something like that: {ref table}_{ref column}
-Then, go into your modeler tree, select the relational model, right click and use "Apply Naming Standards to Keys and Constraints"
-deselect all
-select the last option "Column Foreign Key"
-Go.
What if the names still collide? What if you want to do the job for some--but-not-ALL tables? forget the method above. A transformation script will do that.
You'll need some of these building blocks:
- table.getFKAssociations()
- keys.getRemoteTable().getAbbreviation()
- column.setName()
I'm novice to script coding, sorry I can't assemble a scripted solution right now.
Edited by: T. on May 31, 2011 8:50 AM -
How can I display a table(with column Header) on the frame(contentPane)?
(Can dynamically: Insert,remove,modify )
I have no idea which class I need.here's a handy link
[url http://java.sun.com/docs/books/tutorial/uiswing/components/table.html]tables
and look into javax.swing.table.TableModel -
Static information to be added in message header of the XI message in JMS
Hi Friends ,
Is it possible to add some customer specific internal information to message header of the XI message in PI 7.1 level.. If so how ?
customer wants to add some info and to verify whether it would be handled in PI itself or not..
Business case : SAP -
> PI7.1 -
> IBM MQ
All inputs will be appreciated .
Thanks.,
V.RangarajanHi preetak ,
Thanks for your info .Since i have not worked on JMS adapter
As per the Link it says as follows
If you want to set additional JMS message attributes, select Specify Additional JMS Message Properties (10 Maximum).
· In the table, enter the Name and Java Type of the JMS message properties whose values are to be included in the message header of the XI message.
Under Java Type, you define the JMS Java message type for the attribute in the created JMS message. The following are possible entries:
boolean , init , String etc.,
Question
1. How to pass the value to this parameter will it be XML file with parameter name and value ?
2. Any other blogs to refer ?
Thanks .,
V.Rangarajan -
How Do I Display A Sub-Catalog/Category Header?
I can not for the life of me figure out how to display a sub-catlog's header on the page using the various templates?
I have the code for the main catalog working fine but I can not get the sub-Catalog headers to appear on page in the same way.
I have this in place which is working via the overall layout:
<div class="products-a category catList">
<h1 class="page_title">{tag_name}</h1>
{tag_cataloguelist,2,,50,,true,true}
<div role="navigation" class="pagination-a">
{tag_pagination}
</div>
</div>
Any ideas on how to get this working as I need to display the sub-catlogs headers on the page :-)Little tip.
Do'nt
Remove that right away.
If you do that what you will have is that as your h1 on the product page as well because they all share the same layout. This will mean in terms of SEO search engines like google will go to your product page see the main h1 (first) being the catalog name index that. ALL your products in that catalog will have the same name. -
Select a Row in a table and display the related in formation
I have a uix page displaying table "room" ,there are several patients in every room .What I want to do is: Using "SingleSelection" to select a room and display some attributes of this room and the related patients in a table with using another page. How can I do this? Can I do it declaratively?
room.uix
<bc4j:table name="viewTable" width="80%"
alternateText="No rows found">
<tableSelection>
<singleSelection selectedIndex="0"
shortDesc="Select Row"
text="">
<contents>
<submitButton text="Rooms"
ctrl:event="update"/>
</contents>
</singleSelection>
</tableSelection>
<bc4j:keyStamp>
<bc4j:rowKey name="key"/>
</bc4j:keyStamp>
<contents>
<!-- A bc4j:column element is added for each attribute
in the ViewObject. -->
<bc4j:column attrName="PacsDemonstrationId">
<columnHeader>
<bc4j:sortableHeader/>
</columnHeader>
how to then write patients.uix?...
Thanks
YongHi,
Check the below thread
[Find the records in Table control |Reg : Find the records in Table control]
in the above thread, you can omit the POPUP_GET_VALUES function module since you have an input field for search purpose
Hope this serve your purpose
Cheers
Ramchander Rao.K -
Share my experiences with the B520 Model
I have purchased the Lenovo All-In-One desktop computer model B520 on Nov 15th. It arrived in my office on Nov 21st. It’s been a month now after using it, I would like to share my thoughts about it.
Pros:
Saves space, this is the biggest advantage of AIO desktop; this is the primary reason that why I have switched. Computers with a case and a separated monitor is a big issue for me. I never liked these cables for mouse, keyboard, speakers, …etc. it causes a huge mess under the desk. Now, with the All-in-one style, everything is simplified. The only cable I need for this B520 Lenovo desktop is for the power source. It’s designed with different wireless technologies. Mouse and Keyboard are connected through Bluetooth; The system has build-in with the latest 802.11b.g.n WiFi wireless technology. It also has the enhanced integrated 5.0 speakers system that supports SRS Premium Sound Audio.
High Performance, out of all the All-In-One desktop models out there in the market, this machine has the highest hardware specifications. Quad Core Intel 2nd Generation CPU i72600 with Hyper Thread Technology. This is a really powerful CPU, it gives its best performance when it comes with Video Rendering and image processing. Word processing and gaming is a piece of cake for the it to handle. I do a lot of video editing so I will only chose this model of CPU.
The B520 model also comes wit a Nvidia Geforce GT555M. This is a middle class close to a high end video card. It handles most of the 3D games in an acceptable setting, but will not be able to run games like BF3 or Crysis kind of games in high settings. This machine is not for serious gamers, because All-in-one desktops has the performance bottleneck with the video card. Computer manufacturing have to keep down the power it consumes to prevent the machine from over heating. High end video cards all have a very high demand for powers, at same time produces huge amount of heat. This is why there are a lot of people start to customize their own computer cases with water cooling system. It is more sophisticated and comes with a lot of trouble. If you want to have something easy, well organized, and just simply works, go for All-In-One. You will love it.
The Lenovo B520 comes with a Touch Screen, which I don’t usually use that often. If there are kids in the family, it will be a fun toy for them to play with. What I like better, is the Bluetooth mouse. The unique part about this mouse is that it has a build in gravitational sensor, means, this mouse is functional in the middle of nowhere, even hanging in the air. You can imagine using it like a Wii game controller.Just move the mouse and wave it in the air and you will see the cursor on the screen goes where ever you are pointing. How accurate is it? very accurate!! it’s is more sensitive and feels better than using a Wii controller. Lenovo has pre-install some games that can be played interactively with the mouse. The screen is 23″, so it would be a fun experience. I don’t have any kids in the house, so I uninstalled them all to save some disk spaces and speed up the system a little bit.
The keyboard and mouse are both connected by Bluetooth; I also noticed that every time when I start the computer, it takes about 2-3 seconds for them to become effective. I assume Lenovo has designed it with a “sleep feature” for this two devices; it helps to save battery and extend the replacement cycle.
The computer also comes with a 3D glasses. The touch screen has a very high refreshing rate(120Mhz) which is better for the eyes. The screen works interactively with the 3D glasses. When the computer is playing a movie in 3D format, when I wear the 3D glasses and facing the screen, it automatically turns on and I am in 3D mode!!! It supports a lot of 3D games too!! The feeling in a racing car 3D game is UNBELIEVABLY REAL!! I love it so much! It’s a TOTALLY NEW LEVEL of gaming experience!
Also, Lenovo has designed 4 slots for memory modules. they have installed 8GB onto two slots and there are another 2 slots available to use. This is very useful for people like me demands for more rams. It also provides four USB 2.0 and two USB 3.0 port; more than any other All-in-one desktops on the market. The 5 in-one card reader is convenient for uploading photos from cameras. two HDMI ports, I can also connect my PS3 or Xbox360 to it if I want to use it’s 3D touch screen. It has a building TV tuner, so watching TV on it is another feature.
Cons:
Even the computer is very well designed, as a high end user I found there are still a couple places that Lenovo can improve.
1. Lenovo has researched and developed this RapidDrive technology; I see this is an option on the Spec-sheet for the product, but I never had the chance to upgrade it. I demand for a high disk performance; I was a little disappointed when I found out that I wasn’t able to install another SSD high performance disk into the computer. I had to take out the 2TB standard disk drive and replace it with the SSD. It would be really nice if I can have the high performance SSD installed as the system drive, and the HD installed as the storage drive. The RapidDrive technology may become failing out now, because it was from those years that SSD weren’t popularly used. Compare to the present, SSD is getting more and more popular, the SSD is improving it’s performance and lowering it’s cost. In the next one or two years, the RapidDrive technology will likely become a history.
2. I have opened the B520 model to see the inside modules. I see there are still plenty of spaces that Lenovo engineer can use to expand the upgrade capacities. I can use some simple tools to modify the inside body a little bit to fit another hard drive, but it stopped me from doing it because there is not another power cord connector. Those extra mSata connectors are sitting there and watching me could do anything about it; = (
3. Lenovo technical support did not have a most updated tech sheet for their system. Again, I am a tech kind of guy. I was looking for a manual to better understanding the B520 motherboard.(so I can modify it and add some extra hardware to it) I have called their technical support, talked to people, went through their online data base, they weren’t able to provide me this manual. The lastest information they have is for the previous model. The B520 Model I have a the newest I believe. Lenovo should keep up with their technical support, and be prepare for experienced users.
Conclusion:
I am satisfied with it. I feel I have made a great purchase. Would be nice it I can install an additional SSD in there. Would nice if they can put a high end video card in there. Good for home offices, and home entertainments. Not recommended for hardcore gamer.
Price: 4.5 / 5
Performance: 4.5 / 5
Exterior Design: 5 / 5
Interior Design: 3.5 / 5
Customer Service: 4.5 / 5
Time from order to receive the product: QUICKLY
Other thoughts:
When I was doing my research on All-In-One, here are the reasons that why I have chosen Lenovo:
1.Sony has a well designed for their product, but the price is high. Most importantly, the video card they have is Nvidia Geforce 540M GT, and it only supports 8GB of ram, not 16 GB.
2. Toshiba has terrible customer services for technical support. I had a very bad experience with them. I believe they have out sourced it to India base companies. When the computer is out of warranty after 1 year, they charge a $35(or $30)dollars troubleshooting fee. I think this is ridiculous to charge the consumer to talk over the phone to find what is the problem with their product.
3. Dell has better customer service than Toshiba; They do not charge for talking and providing the technical support after warranty, but when it comes with parts replacement, that is something we have to pay which is understandable. However, one thing I really don’t like Dell computers is that they install a LOT of junks onto your machine when you buy it. It’s fully loaded with all these third party softwares who pays Dell for more users. It not only slows down the system, but also generate a lot of garbage uses a lot of disk space. I will reconsider to buy Dell if they give me a clean & Junk-free windows.
4. iMac is also a good choice because it’s well designed too. but I did not chose it because it has very limited expansion ports and they charge insanely more for hard-wares upgrade. They have extreme control over their product from customer modification. They don’t even allow the consumer to replace the hard drive themselves.
5. HP also has wonderful All-In-Ones, but their hardware specs seems weak. Never dealt with HP customer service before, so I will not say anything about their customer services. Hopefully it’s better than Toshiba. = )
also been posted on my personal blogThank you for replying.
Where I can buy a seperate RapidDrive?
I couldn't find it on the marcket, or on shop.lenovo.com / http://www.lenovospareparts.com/
With the mSata power splitter, there is a problem.
The data portion and the power portion shares the same connector I belive. I have thought of it but don't know how to make it possible. any suggestions?
the only thing I can find is this : http://www.microcenter.com/single_product_results.phtml?product_id=0317944
but I still need to convert the power connector because it's 4 pin molex;. I guess it should work if I use another 6" Molex to SATA Power Cable Adapter.
Also, I couldn't find which is the SATA 3.0 and Which is the SATA 6.0 connector. SSD will have a huge difference in performace with a SATA 6.0 connector. This is confusing because on the B520 Spec sheet it stated both. I was looking for it's manual to identify, but no one can provides it. Last time when I called, they forwarded my call to Intel. LOL! I was like, **bleep**? It's a board you used and you dont have a manual for it?
Anyways,
Thanks again! -
How to find the level of each child table in a relational model?
Earthlings,
I need your help and I know that, 'yes, we can change'. Change this thread to a answered question.
So: How to find the level of each child table in a relational model?
I have a relacional database (9.2), all right?!
O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
/↑\ Fks
O"O O" <-- level 2 for first table (circle)
/↑\ Fks
"o"o"o" <-- level 1 for middle table (circle)
↑ Fk
"º"Tips:
- each circle represents a table;
- red tables no have foreign key
- the table in first line of tree, for example, has level 3, but when 3 becomes N? How much is N? This's the question.
I started thinking about the following:
First I have to know how to take the children:
select distinct child.table_name child
from all_cons_columns father
join all_cons_columns child
using (owner, position)
join (select child.owner,
child.constraint_name fk,
child.table_name child,
child.r_constraint_name pk,
father.table_name father
from all_constraints father, all_constraints child
where child.r_owner = father.owner
and child.r_constraint_name = father.constraint_name
and father.constraint_type in ('P', 'U')
and child.constraint_type = 'R'
and child.owner = 'OWNER') aux
using (owner)
where child.constraint_name = aux.fk
and child.table_name = aux.child
and father.constraint_name = aux.pk
and father.table_name = aux.father;Thinking...
Let's Share!
My thanks in advance,
Philips
Edited by: BluShadow on 01-Apr-2011 15:08
formatted the code and the hierarchy for readbilityJustin,
Understood.
Nocycle not work in 9.2 and, even that would work, would not be appropriate.
With your help, I decided a much simpler way (but there is still a small problem, <font color=red>IN RED</font>):
-- 1
declare
type udt_roles is table of varchar2(30) index by pls_integer;
cRoles udt_roles;
begin
execute immediate 'create user philips
identified by philips';
select granted_role bulk collect
into cRoles
from user_role_privs
where username = user;
for i in cRoles.first .. cRoles.count loop
execute immediate 'grant ' || cRoles(i) || ' to philips';
end loop;
end;
-- 2
create table philips.root1(root1_id number,
constraint root1_id_pk primary key(root1_id)
enable);
grant all on philips.root1 to philips;
create or replace trigger philips.tgr_root1
before delete or insert or update on philips.root1
begin
null;
end;
create table philips.root2(root2_id number,
constraint root2_id_pk primary key(root2_id)
enable);
grant all on philips.root2 to philips;
create or replace trigger philips.tgr_root2
before delete or insert or update on philips.root2
begin
null;
end;
create table philips.node1(node1_id number,
root1_id number,
node2_id number,
node4_id number,
constraint node1_id_pk primary key(node1_id)
enable,
constraint n1_r1_id_fk foreign key(root1_id)
references philips.root1(root1_id) enable,
constraint n1_n2_id_fk foreign key(node2_id)
references philips.node2(node2_id) enable,
constraint n1_n4_id_fk foreign key(node4_id)
references philips.node4(node4_id) enable);
grant all on philips.node1 to philips;
create or replace trigger philips.tgr_node1
before delete or insert or update on philips.node1
begin
null;
end;
create table philips.node2(node2_id number,
root1_id number,
node3_id number,
constraint node2_id_pk primary key(node2_id)
enable,
constraint n2_r1_id_fk foreign key(root1_id)
references philips.root1(root1_id) enable,
constraint n2_n3_id_fk foreign key(node3_id)
references philips.node3(node3_id) enable);
grant all on philips.node2 to philips;
create or replace trigger philips.tgr_node2
before delete or insert or update on philips.node2
begin
null;
end;
create table philips.node3(node3_id number,
root2_id number,
constraint node3_id_pk primary key(node3_id)
enable,
constraint n3_r2_id_fk foreign key(root2_id)
references philips.root2(root2_id) enable);
grant all on philips.node3 to philips;
create or replace trigger philips.tgr_node3
before delete or insert or update on philips.node3
begin
null;
end;
create table philips.node4(node4_id number,
node2_id number,
constraint node4_id_pk primary key(node4_id)
enable,
constraint n4_n2_id_fk foreign key(node2_id)
references philips.node2(node2_id) enable);
grant all on philips.node4 to philips;
create or replace trigger philips.tgr_node4
before delete or insert or update on philips.node4
begin
null;
end;
-- out of the relational model
create table philips.node5(node5_id number,
constraint node5_id_pk primary key(node5_id)
enable);
grant all on philips.node5 to philips;
create or replace trigger philips.tgr_node5
before delete or insert or update on philips.node5
begin
null;
end;
-- 3
create table philips.dictionary(table_name varchar2(30));
insert into philips.dictionary values ('ROOT1');
insert into philips.dictionary values ('ROOT2');
insert into philips.dictionary values ('NODE1');
insert into philips.dictionary values ('NODE2');
insert into philips.dictionary values ('NODE3');
insert into philips.dictionary values ('NODE4');
insert into philips.dictionary values ('NODE5');
--4
create or replace package body philips.pck_restore_philips as
procedure sp_select_tables is
aExportTablesPhilips utl_file.file_type := null; -- file to write DDL of tables
aExportReferencesPhilips utl_file.file_type := null; -- file to write DDL of references
aExportIndexesPhilips utl_file.file_type := null; -- file to write DDL of indexes
aExportGrantsPhilips utl_file.file_type := null; -- file to write DDL of grants
aExportTriggersPhilips utl_file.file_type := null; -- file to write DDL of triggers
sDirectory varchar2(100) := '/app/oracle/admin/tace/utlfile'; -- directory \\bmduhom01or02
cTables udt_tables; -- collection to store table names for the relational depth
begin
-- omits all referential constraints:
dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'REF_CONSTRAINTS', false);
-- omits segment attributes (physical attributes, storage attributes, tablespace, logging):
dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SEGMENT_ATTRIBUTES', false);
-- append a SQL terminator (; or /) to each DDL statement:
dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SQLTERMINATOR', true);
-- create/open files for export DDL:
aExportTablesPhilips := utl_file.fopen(sDirectory, 'DDLTablesPhilips.pdc', 'w', 32767);
aExportReferencesPhilips := utl_file.fopen(sDirectory, 'DDLReferencesPhilips.pdc', 'w', 32767);
aExportIndexesPhilips := utl_file.fopen(sDirectory, 'DDLIndexesPhilips.pdc', 'w', 32767);
aExportGrantsPhilips := utl_file.fopen(sDirectory, 'DDLGrantsPhilips.pdc', 'w', 32767);
aExportTriggersPhilips := utl_file.fopen(sDirectory, 'DDLTriggersPhilips.pdc', 'w', 32767);
select d.table_name bulk collect
into cTables -- collection with the names of tables in the schema philips
from all_tables t, philips.dictionary d
where owner = 'PHILIPS'
and t.table_name = d.table_name;
-- execution
sp_seeks_ddl(aExportTablesPhilips,
aExportReferencesPhilips,
aExportIndexesPhilips,
aExportGrantsPhilips,
aExportTriggersPhilips,
cTables);
-- closes all files
utl_file.fclose_all;
end sp_select_tables;
procedure sp_seeks_ddl(aExportTablesPhilips in utl_file.file_type,
aExportReferencesPhilips in utl_file.file_type,
aExportIndexesPhilips in utl_file.file_type,
aExportGrantsPhilips in utl_file.file_type,
aExportTriggersPhilips in utl_file.file_type,
cTables in out nocopy udt_tables) is
cDDL clob := null; -- colletion to save DDL
plIndex pls_integer := null;
sTableName varchar(30) := null;
begin
for i in cTables.first .. cTables.count loop
plIndex := i;
sTableName := cTables(plIndex);
* Retrieves the DDL and the dependent DDL into cDDL clob *
* for the selected table in the collection, and writes to file.*
begin
cDDL := dbms_metadata.get_ddl('TABLE', sTableName, 'PHILIPS');
sp_writes_ddl(aExportTablesPHILIPS, cDDL);
exception
when dbms_metadata.object_not_found then
null;
end;
begin
cDDL := dbms_metadata.get_dependent_ddl('REF_CONSTRAINT', sTableName, 'PHILIPS');
sp_writes_ddl(aExportReferencesPhilips, cDDL);
exception
when dbms_metadata.object_not_found2 then
null;
end;
begin
cDDL := dbms_metadata.get_dependent_ddl('INDEX', sTableName, 'PHILIPS');
sp_writes_ddl(aExportIndexesPhilips, cDDL);
exception
when dbms_metadata.object_not_found2 then
null;
end;
begin
cDDL := dbms_metadata.get_dependent_ddl('OBJECT_GRANT', sTableName, 'PHILIPS');
sp_writes_ddl(aExportGrantsPhilips, cDDL);
exception
when dbms_metadata.object_not_found2 then
null;
end;
begin
cDDL := dbms_metadata.get_dependent_ddl('TRIGGER', sTableName, 'PHILIPS');
sp_writes_ddl(aExportTriggersPhilips, cDDL);
exception
when dbms_metadata.object_not_found2 then
null;
end;
end loop;
end sp_seeks_ddl;
procedure sp_writes_ddl(aExport in utl_file.file_type,
cDDL in out nocopy clob) is
pLengthDDL pls_integer := length(cDDL);
plQuotient pls_integer := null;
plRemainder pls_integer := null;
begin
* Register variables to control the amount of lines needed *
* for each DDL and the remaining characters to the last row. *
select trunc(pLengthDDL / 32766), mod(pLengthDDL, 32766)
into plQuotient, plRemainder
from dual;
* Join DDL in the export file. *
* ps. 32766 characters + 1 character for each line break. *
-- if the size of the DDL is greater than or equal to limit the line ...
if plQuotient >= 1 then
-- loops for substring (lines of 32766 characters + 1 break character):
for i in 1 .. plQuotient loop
utl_file.put_line(aExport, substr(cDDL, 1, 32766));
-- removes the last line, of clob, recorded in the buffer:
cDDL := substr(cDDL, 32767, length(cDDL) - 32766);
end loop;
end if;
* If any remains or the number of characters is less than the threshold (quotient = 0), *
* no need to substring. *
if plRemainder > 0 then
utl_file.put_line(aExport, cDDL);
end if;
-- record DDL buffered in the export file:
utl_file.fflush(aExport);
end sp_writes_ddl;
begin
-- executes main procedure:
sp_select_tables;
end pck_restore_philips;<font color="red">The problem is that I still have ...
When creating the primary key index is created and this is repeated in the file indexes.
How to avoid?</font> -
SQL Developer - problems with the Data Modeller part
Hi SQL Developer users,
I can open the Data Modeler pane, but I can't insert any object into the logical model or into the relational model. Any ideas about what I'm doing wrong? Do I need specific privileges to the database, or do I need to install SQL Developer in a different way?
Thanks,
CsiszHi Csisz,
as Ivaylo wrote - it's Data Modeler Viewer into SQL Developer.
I can't insert any object into the logical model or into the relational modelYou can drag tables from SQL Developer browser and drop them on relational model diagram. If you keep Ctrl key pressed then all child tables also will be imported and shown on diagram.
Philip -
I Need Interactive Report for displaying vendor information. Based on the s
Interactive Report for displaying vendor information. Based on the selection made by the corresponding Vendor Bank Details are listed such that the line selected in the basic list was visible along with the secondary list.
hi
Hi
Use the Table LFA1 and LFB1 in the basic list
and LFBK table details in the secondary list
see the sample code related to customer Sales orders
modify it with the Vendor tables
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
<b>Vendor performance report</b>
See this sample code
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
" document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
EBELN(90) TYPE C, " Purchase Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
" the Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
OBJECTID TYPE CDHDR-OBJECTID, " Object value
CHANGENR TYPE CDHDR-CHANGENR, " Document change number
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
OBJECTID(10) TYPE C, " Object Value
CHANGENR TYPE CDPOS-CHANGENR, " Document change number
TABNAME TYPE CDPOS-TABNAME, " Table Name
FNAME TYPE CDPOS-FNAME, " Field Name
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
TABNAME TYPE DD03L-TABNAME, " Table Name
FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
WERKS TYPE LFA1-WERKS, " Plant
NAME1 TYPE LFA1-NAME1, " Name1
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
OF FS_OUTTAB.
C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
W_VALUE TYPE EKKO-EBELN, " Reflected Value
W_SPACE VALUE ' ', " Space
W_FLAG TYPE I, " Flag Variable
W_VARIANT TYPE DISVARIANT, " Variant
*--- ALV Grid
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
*--- Event Handler
W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
*--- Field catalog table
T_FIELDCAT TYPE LVC_T_FCAT.
AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
PERFORM DESCRIPTION.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
PERFORM GET_CELL_INFO.
SET PARAMETER ID 'BES' FIELD W_VALUE.
CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
CREATE OBJECT W_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = CL_GUI_CONTAINER=>SCREEN0
I_APPL_EVENTS =
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = W_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = T_OUTTAB
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
Subroutine to build the Field catalog
<--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
SELECT EBELN " Purchasing Document Number
ERNAM " Name of Person who Created
" the Object
LIFNR " Vendor's account number
EKGRP " Purchasing group
BEDAT " Purchasing Document Date
FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
WHERE EBELN IN S_EBELN
AND BEDAT IN S_BEDAT.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
SELECT OBJECTCLAS " Object Class
OBJECTID " Object value
CHANGENR " Document change number
USERNAME " User name
UDATE " Creation date
FROM CDHDR
INTO TABLE T_CDHDR
FOR ALL ENTRIES IN T_EBELN
WHERE OBJECTID EQ T_EBELN-EBELN
AND UDATE IN S_UDATE
AND TCODE IN ('ME21N','ME22N','ME23N').
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Header Not Found'(031).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
SELECT OBJECTCLAS " Object class
OBJECTID " Object value
CHANGENR " Document change number
TABNAME " Table Name
FNAME " Field Name
VALUE_NEW " New contents of changed field
VALUE_OLD " Old contents of changed field
FROM CDPOS
PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
FOR ALL ENTRIES IN T_CDHDR
WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
AND OBJECTID EQ T_CDHDR-OBJECTID
AND CHANGENR EQ T_CDHDR-CHANGENR.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Item Not Found'(032).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP[] = T_CDPOS[].
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
Subroutine to select Purchase Order Details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
SORT T_EBELN BY EBELN.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
FS_CDPOS-OBJECTID BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE TABLE T_EBELN FROM FS_EBELN.
ENDIF. " IF SY-SUBRC NE 0.
ENDLOOP. " LOOP AT T_CDPOS...
LOOP AT T_EBELN INTO FS_EBELN.
MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
APPEND FS_EKKO TO T_EKKO.
ENDLOOP. " LOOP AT T_EBELN...
T_EKKO_TEMP[] = T_EKKO[].
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
SORT T_EKKO_TEMP BY LIFNR.
DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
SELECT LIFNR " Account Number of Vendor or
" Creditor
NAME1 " Name 1
FROM LFA1
INTO TABLE T_LFA1
FOR ALL ENTRIES IN T_EKKO_TEMP
WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
IF SY-SUBRC NE 0.
MESSAGE S002(M8) WITH 'Master Details'(033).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
SORT T_CDPOS_TEMP BY TABNAME FNAME.
DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
SELECT TABNAME " Table Name
FIELDNAME " Field Name
ROLLNAME " Data element
FROM DD03L
INTO TABLE T_DATAELE
FOR ALL ENTRIES IN T_CDPOS_TEMP
WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
IF NOT T_DATAELE IS INITIAL.
T_DATAELE_TEMP[] = T_DATAELE[].
SORT T_DATAELE_TEMP BY ROLLNAME.
DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
SELECT ROLLNAME " Data element
DDTEXT " Short Text Describing R/3
" Repository Objects
FROM DD04T
INTO TABLE T_TEXT
FOR ALL ENTRIES IN T_DATAELE_TEMP
WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
AND DDLANGUAGE EQ SY-LANGU.
IF SY-SUBRC NE 0.
EXIT.
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
OBJECTCLAS = FS_CDPOS-OBJECTCLAS
OBJECTID = FS_CDPOS-OBJECTID
CHANGENR = FS_CDPOS-CHANGENR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
READ TABLE T_EKKO INTO FS_EKKO WITH KEY
EBELN = FS_CDHDR-OBJECTID
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
LIFNR = FS_EKKO-LIFNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
TABNAME = FS_CDPOS-TABNAME
FIELDNAME = FS_CDPOS-FNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE T_TEXT INTO FS_TEXT WITH KEY
ROLLNAME = FS_DATAELE-ROLLNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
APPEND FS_OUTTAB TO T_OUTTAB.
CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
IMPORTING
E_ROW =
E_VALUE = W_VALUE
E_COL =
ES_ROW_ID =
ES_COL_ID =
ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
Subroutine to validate Purchase Document Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
SELECT EBELN " Purchase Document Number
FROM EKKO
INTO W_EBELN
UP TO 1 ROWS
WHERE EBELN IN S_EBELN.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E717(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
Subroutine to validate Vendor Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
SELECT LIFNR " Vendor Number
FROM LFA1
INTO W_LIFNR
UP TO 1 ROWS
WHERE LIFNR IN S_LIFNR.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E002(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
Subroutine to validate the Purchase Group
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
SELECT EKGRP " Purchase Group
FROM T024
INTO W_EKGRP
UP TO 1 ROWS
WHERE EKGRP IN S_EKGRP.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E622(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
<b>Reward if usefull</b> -
Display Dynamic Member List Variable value in the Header
Hi
In my HFR report im using a dynamic member list as DynList1(@POV) in the Entity Dimension; for HFM Application.
For the Entity Parameter im using User Prompt for Entity.
For the User Prompt im using a choice list of Four entity members. E1, E2,E3, E4.
I have 4 member lists ML_E1,ML_E2, ML_E3, ML_E4 such that ML_E1 contains few of the descendants of E1.
So wen i run the report i select E1 in the user prompt and the ML_E1 is used in the Report. This is working fine.
Now, i want to display the MemberName and Description of E1 in the Header.
Im not sure if it can be done. But wanted some confirmation from Hyperion Community on whther this can be done.If yes, please let me know how.
Thanks
VibhutiI tried to recreate the problem like listed above, but after I add the Outputcollection of the Invoke as a parameter, there is no schema info (not even task:task) when editing the Assignment and Routing Policy section. At any rate, there weren't errors to speak of - the instance completed with "The state of this instance is Completed".
In the meantime, I've used a while loop to loop through a sequence of approvers that are result of a query. I'll have to keep track of approvers and include them in each new payload I think. -
Displaying a subset of records is limiting the information I can show
Hello All,
I'm developing my photo gallery's TOC page and when I began, I had lots of data I wanted to display and through the use of lookup tables and the proper logic in my SELECT query, I could show a vertical list of galleries that matched a specific category. With each was listed two sample thumbnails, title, description, model, photographer and make-up artist names. I even was able to set the page title and header to display the proper information.
An additoinal SELECT query counted the number of galleries in the main table that were relevant to the present query string value.
Another SELECT query counted the number of photos in each different gallery photoset and displayed that information in EACH gallery's title.
The description is in reverse to the flow of the code, keep in mind. Here is the code (the $spec variable is that of the query string.):
//get the total number of photos in a gallery photoset
$conn = dbConnect('query');
$getTotal = "SELECT COUNT(*)
FROM photos, galleries
WHERE galleries.g_spec = '$spec%'
AND galleries.g_id = photos.g_id ";
$total = $conn->query($getTotal);
$row = $total->fetch_row();
$totalPix = $row[0];
// get the number of galleries
$conn = dbConnect('query');
$getGtotal = "SELECT COUNT(*)
FROM galleries
WHERE galleries.g_spec = '$spec%' ";
$g_total = $conn->query($getGtotal);
$row = $g_total->fetch_row();
$galTotal = $row[0];
//get gallery thumbnails, name, description, subject, category, model, photographer, mua
$conn = dbConnect('query');
$sql = "SELECT g_thumb1, g_thumb2, g_name, g_desc, subject_id, category_id, model_name, photographer_name, mua_name
FROM galleries, gallery_spec, model_names, photographer_names, mua_names
WHERE galleries.g_spec = '$spec%'
AND gallery_spec.g_spec = galleries.g_spec
AND model_names.model_id = galleries.g_model
AND photographer_names.photographer_id = galleries.g_photographer
AND mua_names.mua_id = galleries.g_mua
ORDER BY g_id DESC ";
$result = $conn->query($sql) or die(mysqli_error());
$galSpec = $result->fetch_assoc();
*** end of code.
Anyhow, this worked wonderfully. However, as I add galleries, this list will get quite long. So, I wanted to add navigation which would break up the number of galleries into set quantities.
When I introduced parameters to LIMIT the number of queries displayed based on a variable called SHOWMAX, my displayed data got all botched. admittedly, I'm adapting code from David Powers' book PHP Solutions and am learning as I go. I gave up on displaying all of the data shown above and went the simple route, figuring I'd add more features as I learned. This necessitated restructuring my database a bit.
Here is the code I added that allows for navigation based on a limit of 3 entries per page:
// set maximum number of records per page
define('SHOWMAX', 3);
// get the number of galleries
$conn = dbConnect('query');
$getGtotal = "SELECT COUNT(*)
FROM galleries ";
$g_total = $conn->query($getGtotal);
$row = $g_total->fetch_row();
$galTotal = $row[0];
// set the current page
$curPage = isset($_GET['curPage']) ? $_GET['curPage'] : 0;
// retrieve subset of galleries
$conn = dbConnect('query');
// calculate the start row of the subset
$startRow = $curPage * SHOWMAX;
$sql = "SELECT *
FROM galleries
ORDER BY g_id DESC
LIMIT $startRow,".SHOWMAX;
$result = $conn->query($sql) or die(mysqli_error());
$galSpec = $result->fetch_assoc();
*** end of code.
Along with some navigation code in the body:
<div id="header4">
<p>Displaying <?php echo $startRow+1;
if ($startRow+1 < $galTotal) {
echo ' to ';
if ($startRow+SHOWMAX < $galTotal) {
echo $startRow+SHOWMAX;
else {
echo $galTotal;
echo " of $galTotal";
if ($curPage > 0) {
echo '<a href="'.$_SERVER['PHP_SELF'].'?curPage='.($curPage-1).'"> Back </a>';
if ($startRow+SHOWMAX < $galTotal) {
echo '<a href="'.$_SERVER['PHP_SELF'].'?curPage='.($curPage+1).'"> Next </a>';
?>
I can now display my gallery information in groups of 3 per page.
THE PROBEM IS that when I add additional queries, say to get the subject and category information, model, photograpger and or make-up artist information, it doesn't always come up, sometimes it messes up the display, and in all cases, this additional information disappears when I navigate from subset to subset. This is why I have been asking about carrying values from one page to the next.
I am absolutely stonewalled and am going to have to put the galleries into service sans navigation until I can figure it out. I'm willing to even hire someone for advice. I just can not make this work. Yes, I realize it's complex for someone of my skill level, but I have no choice, I have to make this work.
Alternate forms of navigation/showing subsets of records would be greatly appreciated. ANY help, suggestions or guidance will be greatly appreciated.
Thank you for reading through all this.
Most sincerely,
wordmanAgain you are misunderstanding. I'm not suggesting hardcoding any values. I am only asking if you are/were trying to pass the actual subject and category descriptions, or the id's of category and subject so you can requery the database on each page.
> I don't think the page re-queries on navigating, I think it just loads info from the array.
I don't think so. Just look at the SQL. It's using the limit and offset values which means to me that it's only returning the rows for the current page. What array are you talking about?
>So, I added a separate query to pick this info from the DB, and it bombs the page.
I really believe you are going about this all wrong. Right now you are searching for solutions to specific problems without having a solid foundation in the technologies involved. Trying to build as you learn is a recipe for disaster and frustration. Stop what you are doing for a while. Work on some php and SQL tutorials that are unrelated to this project. Work through them until you understand what each line of code is doing.
Right now you are headed down a rat hole. You may get most of it to work, but you will be plagued by bugs and scripts that are difficult to maintain. -
ALV Report how to display from and to date values in the header.
I develoeped alv report . i want to display selection screen from and to date values in top of page...
any sample code pls guide me..You have to do many things...
first find the selection details using the FM.
RS_REFRESH_FROM_SELECTOPTIONS
use the Blog to Align/populate the Header from the selection table
/people/community.user/blog/2007/05/07/alignment-of-data-in-top-of-page-in-alv-grid
Maybe you are looking for
-
HT1657 I rented a movie from iTunes but it is not showing up in the Movies section. What do I do?
I just rented and downloaded a movie from iTunes and now it will not show up in my iTunes library. What do I do? It DOES show up in iTunes on my iPhone. It DOES NOT show up on my desktop. Any thoughts? Ideas? I rented it for a flight I get on in 3 ho
-
How do I completely enable a new custom asset in Correspondence Management?
Hello! I'm trying to add a new custom asset to the Correspondence Management Solution Accelerator, and have it behave like all other assets in the system (ie searchable, updateable etc). I'm almost there, but there's obviously something I'm missing,
-
Hello I recently had to reinstall my software for a dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has d
-
How do I make the webutil file transfer works correctly?
Hello, I'm using Oracle 10g Database and form builder in developer suite 10g release 2. Running on Windows XP SP2. I've created a database user, executed the create_webutil_db.sql , and created a table as below: CREATE TABLE DOCS (DOC_ID VARCHAR2(15)
-
Firefox Sync not working again!
Hello. At a time when the sharing or sync'ing of information is so important, the current Firefox sync service is a disgraceful shambles. What makes this even worse, is your continuing refusal to get it properly sorted. As appears obvious from your T