Display fuzzy logic firering rule in front panel?

Hi all,
I only can display the firering rule no. (attached 1.gif red circule) in front panel.
How can I also display the firering rule no. detail infomation (attached 2.gif) in display panel?
Can I show the .fc file (generate in Fuzzy Logic Controller Design)detail infomation in display panel?
Thanks
Fung
Attachments:
1.GIF ‏61 KB
2.GIF ‏79 KB

Stephen M,
Attached .fc file. Please help!
Thanks
Fung
Attachments:
FuzzyDesign_v5_height.fc ‏3 KB

Similar Messages

How to: display large error note in the front panel?

hi guys,
When "error out" has an error, I would like to display HUGE RED TEXT in the FRONT PANEL saying: "STOP, ERROR DETECTED!" )
How to do that?
Thanks for your help.
Solved!
Go to Solution.

Place an indicator on the panel. Set the text to HUGE and RED, and set its value to "STOP, ERROR DETECTED!". Make it not visible. When you get an error, use the "Visible" property node to display it.
To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.

I've got the labview vi written to read my IMU data from a serial port in COM1 and it displays onto the table on the front panel. I'm having trouble getting this data onto an excel spreadsheet. Any ideas?

I've got the labview vi written to read my IMU data from a serial port in COM1 and it displays onto the table on the front panel. I'm having trouble getting this data onto an excel spreadsheet. Any ideas? Right now my data will collect one reading instead of continuously reading my IMU which displays data in a continuous stream.
Thanks
Attachments:
Read_IMU_Drew.vi ‏21 KB

Hi
Your vi is in 2009 version, which i am unable to open in 8.6
However, if you want your data to be saved in excel sheet, here is the VI
Somil Gautam
Think Weird
Attachments:
save to excel.vi ‏12 KB

Display and interact with a vi front panel on remote C++ app

Hello:
I am new to LV and need a little advice. I need to display a LabVIEW VI front panel in my C++ .Net application that users can interact with to view real-time spectrum data. The C++ app (client) must reside on a separate computer(s) from the VI so that the client can connect from anywhere around the world and interact with the VI.
I am not sure about the basic architecture that should accompany a good solution. We want to use TCP/IP but not DataSocket. I do not have access to Measurement Studio but I do have access to LabVIEW Professional Development System v 8.2. Can anyone provide suggestions on what I need to do in order to
1. Connect to my TCP server using my C++ client app - I have already written TCP client and server code which communicate but now I need to integrate LV
2. Get access to the VI sitting on that server
3. Send the VI front panel to the client for display
4. Allow the user to modify parameters on the front panel displayed on the C++ client, send those changes back to the server, and refresh the front panel displayed in the C++ client given the new parameters (I would like a real-time display of the spectrum to always be available)
Is this possible? Has anyone done this using C++ .NET in VS2005? Are there examples I can mimic or references that will help direct me? I have searched and searched through NI's help and found a lot of good stuff but I'm still feeling confused about the best way to utilize LV.
Thank you in advance!

One more question ... what if I could use Measurement Studio? The documentation seems to indicate that it's easy to create network applications and therefore it would be easy for me to re-create our VI's front panel using Measurement Studio components in my C++ app and then simply connect those components to the networked hardware (TCP/IP or DataSocket) that could be located anywhere in the world.
Depending on what components you are using in your LabVIEW panel, it is probably pretty easy to build a Measurment Studio application to look like a LV panel.
Given that, you could use network shared variables to move data across the network, no TCP programming necessary -- I think that this is pretty easy to do, but I don't know the specifics about variable programming in that environment. Also, you will probably need to add some smarts to the server side to make sure that it is reading to and writing from variables in an appropriate manner.
Question: why can't you just use LabVIEW for the client application also?

How to display some html code in the front panel

Hello.
I am trying to properly display a few lines of html code in some kind of indicator on my front panel.
I was trying to use an ActiveX container with MS IE in it, but all the methods I find are to make it navigate to a given URL. I did not find any method or property by which I could give it some html code and it would display it.
Anybody know of a way to do this? It does not have to be using ActiveX or MS IE.
Thanks in advance,
Alejandro

Here is a simple way using the activeX that I have embedded in some programs in the past. You will have to call the file path to show the file.
Hope this helps some.
-Dave
Attachments:
HTML Window.vi ‏36 KB

How do I programmatically display jpeg files on the front panel

Hi,
I would like to be able to programmatically display various jpeg images on the front panel of a VI. I would mostly like to be able to display one image at a time and have the ability to programmatically change the image to different ones under program control. I found a picture indicator but not sure how to use if or if this is the best way. Thanks for any help.
Dave Adams

Yes, you can use a picture indicator.
The attached simple codelet shows how to display a jpeg image on it (Make sure the image indicator is big enough).
Let us know if you need help with the rest of the coding.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
DrawJpeg.gif ‏2 KB

How can I simultaneously acquire and display an image on the front panel using a PCI-1408

I have to acquire and display an image directely in the front panel of a *.vi using a PCI-1408. i have to know all informmations about this image because I want to create a calibration system.

Hi Paola,
if you own IMAQ Vision you can just have a look at the examples that comes with your board or you can look at: http://zone.ni.com/devzone/explprog.nsf/6c163603265406328625682a006ed37d/2abaefe05789961686256866007c0d22?OpenDocument.
Without IMAQ Vision look at:
http://zone.ni.com/devzone/explprog.nsf/6c163603265406328625682a006ed37d/22474456534202b086256aff005fc4f3
(or search at ni.com for "IMAQ Display without IMAQ Vison)
Please mail me if you need further help,
Michael

Determine Front Panel in memory

Hi!
Is there any way to determine, is the front panel loaded into memory, programitically?
Thanks!
+++ In God we believe, in Trance we Trust +++
[Hungary]
Solved!
Go to Solution.

Well, easy rule of thumb:
LV does not load the front panel into memory if not needed.
LV loads the front panel into memory if you display it.
LV loads the front panel into memory if using property nodes requiring the front panel. This info can be obtained from the detailed help of this property:
LV loads the front panel into memory for certain methods (also documented in detailed help of the method).
On a side note:
Please do not mix execution of code in the UI thread with loading the front panel. The UI thread is always running and does not determine wether (or not) front panels are loaded into memory!
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Front panel of a vi pops up when i start my top level vi how can i stop this

i have a vi that whos front panel should display when the user clicks a front panel button(test instructions),
however this vi pops up when i run the top level vi. I can manually close the vi, but how do i stop this?
i tried modifying the Sub VI Set up properties, but that doesnt work.
Solved!
Go to Solution.

Hi jknapp,
As egraham has pointed out, you can customize the window appearance of your sub VI from the VI Properties. If you go to File » VI Properties, then under Category select Window Appearance and then Customize..., you should be able to control how the sub VI appears. Hope this helps!
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support

Limit Front Panel Bounds programmably

Hi,
My front panel contains a picture control that fills the panel. I allow the user to resize the window and also apply zoom factors to it. At times, I have to limit the panel size to prevent the panel from being larger than the drawing area of the picture. This is easy to do when the zoom factor is changed, but I'm having trouble finding a good solution when the user reszes the panel.
Currently I am using the "Panel Resize" event to detect when the panel size has changed and if it is too big I use a property node to reset the front panel bounds. This works but is not ideal. Since this is not a filtered event, I can only fix it after it has been moved which means the user can see the front panel background momentarily before I can properly set the size.
Is there a more elegant way to accomplish this task?
Ideally, I'd like to programmably set a limit on the maximum front panel size such that as the user resizes then panel, it just stops at that limit.
Thanks in advance,
steve
LV 8.2 but soon 8.5
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.

Thanks for the responses so far,
Here are some examples to better illustrate the issue.
The first one (res_win) shows the default behavior with the picture set to fill the panel and to Scale object with pane. The picture control displays a circle that fills the front panel. When you drag the right side of the front panel, first you see some of the background, then the picture is resized and the background is covered. This is sort of ugly imho plus I only want the customer to see the circle, not the empty space next to it.
The second example (res_win1) uses the Panel Resize event to check for and limit the front panel size, but it still shows the background momentarily which I don't like.
Thanks again,
steve
LV 8.2.1
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.
Attachments:
res_win.vi ‏21 KB
res_win1.vi ‏36 KB

Run Vi from the front panel...

I'm trying to run a vi, but not from a run botton, and not even by the execution properties. I'd like the vi to run when i turn on same logic botton on the front panel. Is it possible? Thaks, sorry for my bad inglish. Obrigado.

It is possbile to selectively run a vi using the VI server. I guess in your case you will still need to run a main to control the logic button. Check here for more information.

How to stream live on front panel by given browser url

Hi,
I have an IP Camera which can be viewed online through a given url.
However, i am stuck trying to display the live stream on my front panel. DAQ-Max is not needed because the camera is already integrated to software.
Attached is my VI so far, and here is the website:
http://153.20.39.66:8051/
Click on mobile mode to see the live video stream.
However there is an error at the "READ JPEG file" when i run the VI. I dont really understand the error?
I just need to link the VI's front panel to the live stream video via url. How do I do that? Thank you in advance!
Attachments:
IP Camera sub VI.vi ‏23 KB

You might try implementing a web browser within LabVIEW to view your video stream. Check this link out: https://decibel.ni.com/content/docs/DOC-2042
-RGW

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

How can I display only the Data Logging pull down menu on my LV front panel?

Is it possible to hide all unused pull down menu on my front panel vi like File, Edit, View etc.. and only
display the pull down menu for the Data logging?!
best regards
Norick

Hey,
You can build your own runtime menu (Edit>runtime menu) and then e.g. only display the application items you want to.
Christian

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Display fuzzy logic firering rule in front panel?

Similar Messages

Maybe you are looking for