Display issue with old TV and more questions
Hi,
I'm trying to connect my 24" iMac to an older model TV with RCA and S-Video input. I haven't attempted to connect using S Video but i do have the adaptor for the iMac to use the Yellow RCA cable. I understand that it automatically changes the resoltion to adapt to the TV resolution but my question is this.
Does S-Video result in a clearer picture with the TV? Because right now it is virtually unusable because of the picture quality. I have tried to reduce the resolution from the iMac with no prevail. Should i pick up an S-Video cable today?
#2 - Can i turn off the monitor from the iMac without it touching the TV display?
#3 - I only have two sets of inputs on the back of this TV one for the Tivo and one for the Xbox 360. What would i need to add this additional input and change it remotely?
Any help with these is greatly appreciated!
Hi D to the M
You will do better turning Mirroring Off and select the proper resolution for each, when your running that setup in Mirror mode the resolutions are not matched and it goofs up the iMacs resolution. This will also be true using an S-Video cable, but the overall picture quality should be slightly better. Note that the TV will probably not make a good display for working windows, but will be decent for watching movies, video clips, viewing slideshows and photos.
My same TV setup has been connected up for over 2 years, and I just switch the TV off or select another input source.
Dennis
Similar Messages
-
Display issue with Combo Boxes and Logo
Hi All,
I am facing a couple of issues with my dashboard:
1. Combo boxes display - I have placed a series of combo boxes one below the other. During the preview, when I click on the first combo box, the values spread below. That is, the labels, and options of the next combo box are also visible. The options in the combo box are not seen clearly. I have tried many permutations and combinations with "Bring Forward +" and "Send Back -" but none of them seem to work. For example, keeping the first combo as bring forward and next one as send back etc. Can you please help me in this regard?
2. Logo - I have used image component and embedded a logo from my local system. Later I saved the xlf in the repository. When I import the xlf from the platform, it displays the logo fine. But however, this behavior is not constant. It sometimes doesn't show the image. Do I have to save the image also in the repository? or in a common shared folder? If I embed the logo does it not mean that the xlf hold the copy?
Any help in this regards is highly appreciated.
Thanks and regards,
Sandeep.Hi:
For your question
1) Do you need your combox overlapped? I tried to overlap my comb box and preview it, seems works fine for me. it only chooses the first comb box. But I am suggesting that if you want to show/hide the different combox in the same position at run time, you can try to control the visibility by some other component.
2) The answer is NO, the image embedded in the image component will be saved to xlf file, there is no need to save it individually. Try to clean your cache files in your machine and do it again.
Hope it helps. -
Video display issues with Mac Pro and GeForce 7300?
I'm just wondering whether anyone else has experienced any video strangeness with their Mac Pros with GeForce 7300 cards? Basically, twice now I've had the mouse cursor stop responding and the entire screen turn black, then a second later everything's back to normal (with the cursor moving and the display back). I seem to recall a similar issue on my Windows PC with a Quadro FX 1100 card, so I'm hoping it's just a video driver issue.
BryanI am not sure if its the monitor, the MP, or the video card, but, I have had my computer completely replaced after reporting to my local Apple Store about my G5 fans over heating and my monitor either not being able to wake or refusing to sleep. I called AppleCare and did all the normal trouble shooting but they said take it in to store. But now that I have a brand new MP 3.0 I am getting the same issue but no fan noise. I have a 23Cinima HD (the strore said it was fine when they had both my computer and monitor in) but last night after hours of inactivity the monitor had the screen saver on but didn't got to sleep. I then put in to sleep but when I got up this morning I couldn't wake it up. When I got my new computer (3 days ago) I didn't migraite any of my old stuff. I have been slowly reinstalling all my software and updated anything before I install anything else as an added attempt to not have any bad files. I have 2 gig of ram and 500 hd with the 7300 card. I am at a lost I checked and rechecked all my setting. The only other thing I have connected is my airport extreme base.
Any idea's anyone?
Ops one last issue, I have blown my apartment circut breaker three time while attempting to start the new PM and once it did it when I was trying to wake it just by tapping the space bar. Is it the computer being more power hunger?
Mac OS X (10.4.8) -
Has any one experienced issues with iCloud synchronisation and contacts over two or more devices? The primary machine is an iMac running Lion. Address Book was created from vcf file (backup of address book prior to moving to iCloud). iTouch replicates Contacts just fine and matches the Address Book on the iMac. The iPad 2 does not showing only 123 contacts where there should be 200. I have turned off iCloud on both devices thus erasing the iCloud content of both devices and staring from scratch with both devices with identical results. Even turned off iCloud on the iMac and erased the Address Book and rebuilt with the same results. Anyone have any ideas or suggestions? I am going nuts.....
To follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian -
Does anyone else have display issues with Intel X3100 graphics and OS X Lion?
I took the screenshot below to demonstrate one issue I have had with graphics since upgrading to OS X Lion. I use a Late 2007 MacBook with 2.0GHz Core 2 Duo and the Intel X3100 graphics chipset. I have 4GB RAM. Had to reboot to get this to correct itself. The problem is the menubar (obvious) and the desktop image is missing, replaced by the grey.
I have an external monitor connected (second image) and everything displays properly there.
Some other issues I've noticed are using Mission Control sometimes yields unpredictable results, graphically speaking, and the fullscreen apps don't always allow me to see the menubar. These all seem graphically related. Is this a hardware or software problem? Any solutions?Here is another display issue with my machine...perhaps software rather than hardware? The icon for the rtf file "Matt Passages" is missing entirely. There is a faint rectangle present instead. The same file has an icon in the first image posted above. No change to the file since then. And two other RTFs have the icon! Odd things with Lion.
-
Issues with Exchange Account and Q10
Well, I hate to be writing this, but I'm hoping that there might be someone out there that can help get past some first day issues I am experiencing.
The background: I have a long history with legacy BlackBerry devices, and almost as much history with iOS devices. My most recent phone was an iPhone 4S, and I make extensive use of iCloud to keep my iMacs, iPhone, and iPad connected in real-time. The setup worked. It wasn't perfect, but it worked. However, because I used to have a BlackBerry device (most recent the 9930) and because I don't use the iPhone for more than e-mail, iMessage, and phone calls (generally speaking), I decided to give the newest BlackBerry device a shot. So I bought a Q10.
At this point I feel compelled to say that the hardware is everything I had hoped it to be. It's solid, has a good weight, and appears to be made very well. I have no complaints with the hardware, including the keyboard (a big selling factor for me), so I won't really get into the hardware as the issues I am experiencing all have to do with the OS. Let me also say that I am very familiar with the iCloud integration issues (missing Contact photos and disabled Calendar sync), so I'm not voicing a complaint over those issues in this thread.
I have connected my Exchange account. I used to have everything in Exchange before I moved my entire computing world over to Apple, and now I keep Exchange around for e-mail. Therefore, I have no contacts, no tasks, no notes, very limited calendar entries, and a massive amount of e-mail on the Exchange server. However, to test everything out, I have added a single contact record so I can see it show up on the phone and be able to test two-way sync between the Q10 and Exchange. And here is where the first issues crop up. It looks like Exchange connects and then disconnects at random. For example, if I open my Contacts on the phone, I see the one contact (called John Doe). Then, as the phone is sitting there with the screen on, the contact will disappear and I will see a "Start adding contact to your contact list" notice on the screen. Then, after a short period of time, the single contact will return. It is important to note that the entire time this is happening, the All Contacts option is selected in the list so that all available contacts are shown. Additionally, I have SIM card contacts turned off, but if I alter the selection in the view list (All Contacts, Favorites, etc.), the SIM contacts will re-appear when I return to the All Contacts view. At the same time, even though I have turned off SIM Contacts in the settings, the setting has reverted to show SIM Contacts. If I turn off the setting again, SIM Contacts still show up. Possibly related: I can't delete contacts on the SIM card, no matter how many times I try, and it now it seems that I can't get SIM Contacts to go away in the Contacts app.
Likewise, Exchange seems to connect and disconnect from Calendar. I go to the calendar and move day by day to June 15th. I see an entry that I know is from Exchange (I have no other connected calendars at this time), and it is in blue. I change the calendar color to green and the entry changes color, as expected. However, if I jump back to today and then scroll day by day to get to June 15th again, the calendar entry is missing. After a few seconds, the entry re-appears, but it is, once again, in blue. The setting has reverted itself, and it seems like Exchange is completely disconnecting and automatically reconnecting to the phone like I am setting it up again for the first time. Very odd. As I'm typing this, I just saw something odd. I swiped to wake up the phone, and the active frames screen was the visible screen. The calendar app is still running (since I left it running, minimized, when the phone went to sleep) and the date shown in the active card was Jan 1, not Jun 8. Why? The date (and time) on the phone is correct and is set automatically by the cellular system.
Nevertheless, looking at BlackBerry Hub, I see only two e-mails in my Inbox from Exchange, even though I have roughly a dozen in my Inbox. The rest are filed in sub-folders. And bam! Just like that... I get the "Add Accounts" screen while looking at the Hub. In other words, as I was typing this, I first saw two Exchange e-mails and then, out of nowhere, the e-mails disappear and I see the "Add Accounts" screen as if no account has been connected.
So... first question: Is anyone else experiencing this issue? This is very strange, and very frustrating. Second: could this be related to the large amount of e-mails I have stored on Exchange, some of which have large attachments? I selected "Forever" as the sync history length. I have my concerns, however, if this is related to loading historical e-mails onto the phone (in other words, the first sync with Exchange) because there is no reason that I can understand that the phone would blank out as if no account was connected at all. I can understand lag and stuttering while the history is syncing, but not a complete disconnect and reconnect. Considering all of the issues with the one and only contact record disappearing, the calendar entry for Jun 15th disappearing and then reappearing with the wrong calendar color, and e-mail in my Inbox incomplete (two of a dozen e-mails) and ultimately disappearing, I feel like this OS just has some real, significant issues.
Full disclosure: I do want iCloud to work and am a fan of Apple products, but the lack of full iCloud sync support is not a big enough issue for me to want to send back this phone and/or see it fail so miserably. I will happily move my info from iCloud into Exchange, Google, and/or set up a new Exchange account for personal use (Office 365) because I am not wedded to iCloud per se. But, I won't go through that trouble if I can't even get my first account to work properly. It should also be noted that I do have a basic Google account (non-paid) and I had previously attempted to connect to it. However, I was experiencing the exact same issues with contacts disappearing, e-mail disappearing, etc. So I deleted that account. Truth be told, I deleted the Exchange account as well, and then re-connected to Exchange only to test one account at a time. Unfortunately, even with Exchange only, I am seeing very strange and frustrating behavior as described above.
Help... please. I want this to work but the frustration I am feeling is growing worse by the hour.
Model: SQN100-2
OS Release: 10.1.0.2011
OS Version: 10.1.0.2038
Build ID: 525050
IanTo follow-up with this issue:
I ended up performing a security wipe on my device. The security wipe finished, and I was about to reconnect with Exchange when I decided to visit our host's web site to see if they had any articles covering the issues I was experiencing. While they didn't have anything specific, I did find a step-by-step guide to connecting a BB10 device to Exchange... and right there at the end, it said "Do NOT enable memo sync."
I contacted support, and the rep told me that OS 10 has an issue with memo sync and it can cause all sorts of unpredictable behavior. Now, whether or not this is accurate I can say this: So far, the device is not disconnecting and reconnecting like it was before. Problem is, is this a result of not enabling memo sync, or is this a result of the security wipe?
I may have overlooked it, but I don't recall reading anything about that anywhere else. I'm tempted to try re-enabling the memo sync to see if everything blows up again. At least that way I can see for myself if the memo sync is a real issue. Of course, perhaps it's an issue with SherWeb (our host) specifically. Hm...
Anyway, for those that were interested, and for those that may come along in the future with a similar situation, the strange behavior that I first reported is no longer happening. I just don't know if it was a result of a security wipe or a result of not enabling memo sync with Exchange.
Ian -
Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls helpLindsay,
Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard. -
Apple Support admitted an Issue with WEP authentication and some Routers
After reading many posts here and other places I logged a service call to Apple support. With the particulars: AT&T U-verse 2 Wire router would not connect with WEP would connect with Security disabled. I wanted a call logged before I went past the return time
I got a call back immediately after a few basic questions I was passed to a product manager for ipads, it seems connectivity issues are taken seriously.
The upper level support said there were known issues with some routers and WEP security we steeped through changing the security and it works fine now.
Bottom Line:
Apple knows there is an issue with some routers
They were very helpful and acknowledged the issue.
He even stayed on the line while I reconfigured one of my Windows PC to make sure it connected to the new settings
I suggest to all to log a call and get a tech support involved before taking the iPad to the local store
They certainly new their are some connectivity issues. If that does not work you can always return it.
He did not admit it was a Apple issue and did not commit that Apple was working on it but it is something they are aware of.
So skip the Apple store got right to tech support.
Just my 2 cents."But folks need to go straight to tech support. I live in oz, so it will be interesting to see if they help me.. or not.. but if support gets inundated they will fix it or have a massive recall (not likely on the latter)."
Can't agree more. I used to manage a tech support department and it is all about the numbers. No matter how many forum entries the issues that get addressed are dictated by the reports.
So for those that are buying new routers contact Tech Support first even if you end up getting a new router the call is logged that will get Apple's attention.
People that are not familiar with post launch processes have no idea how things that need to get corrected and enhanced are dictated by support requests -
Issue with Information broadcasting and pre-cal server in SAP BI
Hi Experts,
I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
I have 20 employees every month I need to send workbook via e-mail from information broadcasting. The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
Below log In pulled from pre-cal server
Can you please tell what could be the problem.
Successful job
3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in thread 3
3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECMML
3/11/2011 9:31:44 AM (0) -> Excel based operations finished.
Failure job
3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
.xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
3/10/2011 10:23:44 AM (1) -> PID of Excel process: "2544"
3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
SAPBEXPRECQB
Thanks in advance
NarendraHi Ravikanth,
Thank you very much for the reply
I went into RSPRECADMIN and clicked on 'Display Current Queue'. There we have 3 sections
1) Queue Overview of Open Precalculations
I can see this section is always blank after running IB also
2) Queue Overview of Current Precalculations
In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
3) Queue Overview of Proccessed Error-Free Precalculations
All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
Can you please help me further to trace the error.
Thank you
Narendra -
While intending to perform a clean install of Mountain Lion while continuing with old apps and files, is it a waste to restore a backup that was made while running Mountain Lion as an UPgrade from Lion?
Originally I was running Mountain Lion as an UPgrade from Lion. I created a backup in Time Machine, performed a clean install of Mountain Lion, then I proceeded to use Time Machine to restore the back up.
When thinking about the essence of a back up restore, it occurrs to me that for all I know, I may have just wated my time IF Time Machine also restores all the old unneeded files that remain from Lion after an upgrade.
Since the backup was made while running Mountain Lion as an upgrade from Lion, did restoring this backup defeat the purpose of a clean install by reinstalling old Lion files?
If so, how can I re-do the last portion of the process so that I get all my home-folder files and apps back without the full bulk of old Lion files? Migration assistant I'm guessing?
-ChrisHello John!
Thank you for your response which solved my problem. For other users who may stumble upon this, I'll clear up the confusion and share how I solved the problem with your help; When looking for answers to my computer problems, finding unresolved questions where person B offers a solution and person A never comes back and says "That worked, thank you.", it demonstrates a "k-thnx-bye" user mentality that leaves others with the same problem lost. Without further ado:
It is not clear what you did because the meaning of "clean install" is vague. You can erase a volume and install an OS which leaves none of its previous content intact,
This is what I did: I erased the volume leaving no previous content intact, while then installing OS X Mountain Lion.
or you can upgrade an existing OS (or reinstall the same one) which does not alter your user - installed files.
An upgrade to Mountain Lion from Lion is what I started with initially before erasing anything. This was undesirable. Since this can cause Macs to run slower (especially whereas I'm using a mid-2011 Mac Mini), my goal was to go from operating within an upgrade to Mountain Lion, to operating within an installation of Montain Lion that was not preceded by any other oprating system.
Hence a "clean install of Mountain Lion while continuing with old apps and files" is confusing.
Well put and understood. What I should have said was:
1.Erase the volume
2.Install Mountain Lion clean
3.Confirm that Mountain Lion is functioning properly
4.Proceed to use either Time Machine or Migration Assistant to Import/Migrate/Copy over only two things; My old apps (That had been stored originally in the designated Applications folder) and all files and folders originally stored in the home folder under users.
If you restore from a Time Machine backup then all modifications that occurred subsequent to that backup become erased. It renders moot any OS X upgrade performed subsequent to that backup.
That makes sense and is just as I later suspected.
If so, how can I re-do the last portion of the process so that I get all my home-folder files and apps back without the full bulk of old Lion files? Migration assistant I'm guessing?
Yes.
This is what I did and everything works perfectly. Thank you so much once again!
-Chris -
Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0
Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom
You are going to have to contact Adobe on this one. We are other users.
Sounds like it's not even an Apple question? Not sure.
But the Adobe program changed, nothing changed in iTunes, right? -
Issue with Home Address and Phone of ESS(data not getting saved)
Hi Everyone,
We have a issue with ESS HomeAddress and Phone. when we edit and save data, its showing a message that data is saved. but the data is not getting updated in the backend and the view also is showing old data only. Pleas help us, if anyone came across this type of issue.
Thanks & Regards,
RaviPlease check the fields you are editing are not marked as unused in
V_T588M
V_T588MFPROPS
V_T588MFPROPC
Best wishes
Stuart -
Display Issues with Mac Pro 1.1 HELP!!
I have a Mac Pro 1,1:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 4 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005D.B00
SMC Version: 1.7f10
Running OSX 10.6.3
I'm on my second graphics card [ATI Radeon HD 2600] after having issues with the original [NVIDIA GeForce 7300 GT]. The issue with the NVIDIA card was that, at times, it would display digital artifacts, glitches, distortion and freeze up the system forcing me to have to do a hard shut down. I found many reports of similar issues with that card and the Mac Pro 1,1's.
When I replaced it with the ATI the problem went away for 6 months and now IT"S BACK.
So, are there any particular graphics cards that work OK with the Mac Pro 1,1? I don't want to waste my money again only to encounter the same issue!
I'm also contemplating getting a new Mac all together.
Please advise, I've read many threads with this issue and they all seem to point to the same deal: replace the card. I can't afford to keep replacing graphics cards.
SakiThe 2600XT required 10.5.2+ and while it may 'look' like a G5 the Mac Pro is not. G5 refers to IBM PowerPC based, not Intel Xeon EFI based.
You're running 10.6.3, might want to update your profile itself. -
Colour Management Issue with PS CS3 and Leopard 10.5.2
Hi Everyone,
Since I have installed Leopard I am having colour management issues with Photoshop CS3 and my Canon i9950 printer.
My screen is calibrated with a Spyder and I used to ask Photoshop (in 10.4.11) to manage colour when printing and used the Spyder profile. Everything came out as I saw it on screen.
Now in leopard when I do the same thing everything comes out too yellow on the print. If I ask Photoshop to let the printer manage the colour it is too red. If I use the default colour management (photoshop managing the colour and it choosing the colour space it is better, but still too yellow).
Photoshop gives the hint to turn off colour management in the printer but there is no option for this and it also said the same thing before of course (when it worked in 10.4.11).
Any ideas?
Thanks.>It was working perfectly in Tiger with the monitor profile.
You were lucky.
the monitor profile is so Photoshop can display your images correctly.
the working space is Adobe RGB, sRGB, BruceRGB, ect... these are all known color spaces so when the file goes to another computer there is a consistent color space for reference. If you use your monitor profile as a working space then nobody else knows what is going on with your file.
when you print you need to use the printer profile for the type of paper you are printing on this is supplied by the printer manufacturer. you can also have custom profiles made.
you need to read up on color management:
http://www.gballard.net/psd.html
http://digitaldog.net/ -
Issues with illustrator 10 and windows 8
any known issues with illustrator 10 and windows 8...version worked fine on windows xp....new computer with windows 8....now cannot seem to operate. Loads, and shows access but will NOT start up. help ! thanx ttp74
AI 10 is now 10 years or so old and was never tested on nor designed for Win 7 or Win 8. You should simply assume it's not compatible and will never run properly. feel free to spend your time with the compatibility modes and al lsorts of hacking with the security stuff and otehr settings, but to be honest, it will probably be a waste of time.
Mylenium
Maybe you are looking for
-
Hi every body, I'm tryng to upgrade my final cut pro x 10.0.4 to 10.0.5 but when i'm going to the App Store and i log in and i press the button restar (as i start upgrading it a week ago and after i stopped) the window with the ERROR 1004 appear. Wha
-
Question on folder and document order
you used to be able to have a folder's contents changeable (in a list view). there used to be an option to arrange the folders first and then order the documents lower in the list rather than have all mixed up. is this feature gone?
-
PM Querry regarding installed base
hi everybody anyone plz explain what installed base is for? regards pushpa
-
UnsatisfiedLinkError: no weblogicunix1 in java.library.path
Hi, Please help. I am using weblogic 8.1 on linux. While starting my application I am getting the following eerror The WebLogic Server did not start up properly. [java] java.lang.UnsatisfiedLinkError: no weblogicunix1 in java.library.path [java] at j
-
I turned off my iMessage on my iphone4 I tried turning it back on but it won't work it's not letting me turn it back on I have tired everything but nothing will work it keeps saying waiting for activation I don't what the problem is what do I do!