Display Lists in JoGL
I haven't had a problem getting a single Display List to work. However, when I try to create multiple Display Lists and display them using gl.glCallLists, I only get the first Display List created. Not too surprising: I'm not at all sure what I should be doing with the Buffer. Here's some code:
listID = gl.glGenLists(2);
gl.glNewList(listID+0, GL.GL_COMPILE);
gl.glNewList(listID+1, GL.GL_COMPILE);
IntBuffer buff = BufferUtil.newIntBuffer(2);
gl.glListBase(listID);
gl.glCallLists(2, GL.GL_INT, buff);
Any help is GREATLY appreciated! :o)
Maybe you should ask your question again at http://www.javagaming.org/forums/index.php?board=25.0
(this is the official JOGL-forum), they should be able to help you there.
Similar Messages
-
Using a devices camera and adding the image to the display list
Hi,
My students and I have not been able to make an AIR app that can take a picture using the devices camera and then add the image to the display list. We are able to open the devices camera and of course take a picture, but that's it.
We've been using these two tutorials/examples:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/media/CameraUI.ht ml
and
http://tv.adobe.com/watch/adc-presents/input-for-mobile-devices-camera/
I've uploaded our project: http://www.dayvid.com/professor/camera.zip
Can someone help us out?
Thanks!
Below is the main document class:
package {
import flash.desktop.NativeApplication;
import flash.display.Loader;
import flash.display.MovieClip;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.events.ErrorEvent;
import flash.events.Event;
import flash.events.IOErrorEvent;
import flash.events.MediaEvent;
import flash.media.CameraUI;
import flash.media.MediaPromise;
import flash.media.MediaType;
import flash.events.MouseEvent;
public class Main extends MovieClip{
private var deviceCameraApp:CameraUI = new CameraUI();
private var imageLoader:Loader;
public function Main()
this.stage.align = StageAlign.TOP_LEFT;
this.stage.scaleMode = StageScaleMode.NO_SCALE;
camera_btn.addEventListener(MouseEvent.CLICK, cameraBtnClicked);
private function cameraBtnClicked(event:MouseEvent):void
if( CameraUI.isSupported )
result_txt.text = "Initializing camera...";
deviceCameraApp.addEventListener( MediaEvent.COMPLETE, imageCaptured );
deviceCameraApp.addEventListener( Event.CANCEL, captureCanceled );
deviceCameraApp.addEventListener( ErrorEvent.ERROR, cameraError );
deviceCameraApp.launch( MediaType.IMAGE );
else
result_txt.text = "Camera interface is not supported.";
private function imageCaptured( event:MediaEvent ):void
result_txt.text = "Media captured...";
var imagePromise:MediaPromise = event.data;
if( imagePromise.isAsync )
result_txt.text = "Asynchronous media promise.";
imageLoader = new Loader();
imageLoader.contentLoaderInfo.addEventListener( Event.COMPLETE, asyncImageLoaded );
imageLoader.addEventListener( IOErrorEvent.IO_ERROR, cameraError );
imageLoader.loadFilePromise( imagePromise );
else
result_txt.text = "Synchronous media promise.";
imageLoader.loadFilePromise( imagePromise );
showMedia( imageLoader );
private function captureCanceled( event:Event ):void
result_txt.text = "Media capture canceled.";
NativeApplication.nativeApplication.exit();
private function asyncImageLoaded( event:Event ):void
result_txt.text = "Media loaded in memory.";
showMedia( imageLoader );
private function showMedia( loader:Loader ):void
this.addChild( loader );
private function cameraError( error:ErrorEvent ):void
result_txt.text = "Error:" + error.text;
NativeApplication.nativeApplication.exit();Hi,
Do I have to add the picture to the cameraroll in order to add it to the AIR apps display list?
Both examples from Adobe claim that their examples work. Do they not?
In the example, the event handler asyncImageLoaded is never called. The output text field shows - result_txt.text = "Asynchronous media promise."; So the Event.COMPLETE is being added. But I don't think it's being dispatched.
Any ideas? -
Display list of sales orders for one particular customer using BAPI in WD
Friends,
i want to display list of sales orders for one particular customer, the materials ordered, quantity ordered, goods issue date of that particular order and contact information about that particular customer, using Webdynpro.
Please somebody send me related info,blogs,help links , to complete this task, this is very urgent.
Please help
PeterFind the WD tutorials here...
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/web%20dynpro%20sample%20applications%20and%20tutorials.htm">Tutorials</a> -
Reg: Combining two display lists into one list
Dear All,
i want to combine two display lists into one display list. Please give the idea for this one issue.
*****************dispaly list 1 starting here*********************
*& Form F_006_DISPLAY_LIST
* text
* --> p1 text
* <-- p2 text
FORM F_006_DISPLAY_LIST.
* TABLES : LFA1 .
DATA : V_DEBIT_TOTAL TYPE P DECIMALS 2 ,
V_CREDIT_TOTAL TYPE P DECIMALS 2 ,
V_CLOSE_BAL TYPE P DECIMALS 2 .
DATA : V_CNT TYPE I .
SORT ITAB_OPG BY LIFNR.
LOOP AT ITAB_OPG.
NEW-PAGE.
* Displaying Vendor Name
SELECT SINGLE NAME1 FROM LFA1 INTO LFA1-NAME1 WHERE
LIFNR EQ ITAB_OPG-LIFNR .
FORMAT COLOR COL_POSITIVE INTENSIFIED ON.
WRITE:/2 'Vendor Code:' ,
ITAB_OPG-LIFNR ,
40 LFA1-NAME1 .
CLEAR : LFA1 .
WRITE :/(190) SY-ULINE .
* Displaying Opening Balance
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON .
READ TABLE ITAB_OPG WITH KEY LIFNR = ITAB_OPG-LIFNR .
IF ITAB_OPG-BAL LE 0 .
WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
171(18) ITAB_OPG-BAL .
ELSE.
WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
151(18) ITAB_OPG-BAL .
ENDIF.
WRITE :/(190) SY-ULINE .
* Displaying Line Items
LOOP AT ITAB_DISPLAY WHERE LIFNR EQ ITAB_OPG-LIFNR.
V_CNT = SY-TABIX MOD 2.
IF V_CNT EQ 0.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ELSE.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
ENDIF.
* Selecting Bank Name and Cheque Number
SELECT SINGLE CHECT HBKID INTO (PAYR-CHECT , PAYR-HBKID)
FROM PAYR WHERE
ZBUKR EQ P_BUKRS AND
VBLNR EQ ITAB_DISPLAY-BELNR AND
LIFNR EQ ITAB_DISPLAY-LIFNR .
SELECT SINGLE BANKS BANKL INTO (T012-BANKS , T012-BANKL) FROM
T012 WHERE BUKRS EQ P_BUKRS AND
HBKID EQ PAYR-HBKID.
SELECT SINGLE BANKA INTO BNKA-BANKA FROM BNKA WHERE
BANKS EQ T012-BANKS AND
BANKL EQ T012-BANKL .
WRITE :/2 ITAB_DISPLAY-BUDAT ,
14 ITAB_DISPLAY-BELNR ,
26 ITAB_DISPLAY-BLDAT ,
40 ITAB_DISPLAY-XBLNR ,
58(16) PAYR-CHECT ,
75 BNKA-BANKA ,
105(40) ITAB_DISPLAY-SGTXT ,
146(4) ITAB_DISPLAY-BLART .
* Determinig Debit or Credit
IF ITAB_DISPLAY-SHKZG EQ 'S'.
V_DEBIT_TOTAL = V_DEBIT_TOTAL + ITAB_DISPLAY-DMBTR.
WRITE:151(18) ITAB_DISPLAY-DMBTR ,
171(18) SPACE .
ELSEIF ITAB_DISPLAY-SHKZG EQ 'H'.
V_CREDIT_TOTAL = V_CREDIT_TOTAL + ITAB_DISPLAY-DMBTR.
WRITE:151(18) SPACE ,
171(18) ITAB_DISPLAY-DMBTR .
ENDIF.
CLEAR : T012 , BNKA , PAYR .
ENDLOOP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/(190) SY-ULINE.
* Displaying Debit and Credit Totals
WRITE:/125 TEXT-001 ,
151(18) V_DEBIT_TOTAL ,
171(18) V_CREDIT_TOTAL .
WRITE:/(190) SY-ULINE.
* Displaying the Closing Balance
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
V_CLOSE_BAL = ITAB_OPG-BAL + V_DEBIT_TOTAL - V_CREDIT_TOTAL .
IF V_CLOSE_BAL GT 0.
WRITE:/122 TEXT-002 ,
151(18) V_CLOSE_BAL NO-SIGN. " D00K909674
ELSEIF V_CLOSE_BAL LE 0.
WRITE:/122 TEXT-002 ,
171(18) V_CLOSE_BAL NO-SIGN. " D00K909674
ENDIF.
CLEAR : V_CLOSE_BAL.
ENDLOOP.
ENDFORM. " F_006_DISPLAY_LIST
*****************dispaly list 1 ending here*********************
*****************dispaly list 2 starting here*********************
*& Form F_006_DISPLAY_LIST1
* text
* --> p1 text
* <-- p2 text
FORM F_006_DISPLAY_LIST1 .
TABLES : KNA1 .
DATA : V_DEBIT_TOTAL1 TYPE P DECIMALS 2 ,
V_CREDIT_TOTAL1 TYPE P DECIMALS 2 ,
V_CLOSE_BAL1 TYPE P DECIMALS 2 .
DATA : V_CNT1 TYPE I .
SORT ITAB_OPG1 BY KUNNR.
LOOP AT ITAB_OPG1.
NEW-PAGE.
* Displaying Vendor Name
SELECT SINGLE NAME1 FROM KNA1 INTO KNA1-NAME1 WHERE
KUNNR EQ ITAB_OPG1-KUNNR .
FORMAT COLOR COL_POSITIVE INTENSIFIED ON.
WRITE:/2 'Customer Code:' ,
ITAB_OPG1-KUNNR ,
40 KNA1-NAME1 .
CLEAR : KNA1 .
WRITE :/(190) SY-ULINE .
* Displaying Opening Balance
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON .
READ TABLE ITAB_OPG1 WITH KEY KUNNR = ITAB_OPG1-KUNNR .
IF ITAB_OPG1-BAL1 LE 0 .
WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
171(18) ITAB_OPG1-BAL1 .
ELSE.
WRITE :/2 'Opening Balance for Period' , (4) S_MONAT-LOW , ':' ,
151(18) ITAB_OPG1-BAL1 .
ENDIF.
WRITE :/(190) SY-ULINE .
* Displaying Line Items
LOOP AT ITAB_DISPLAY1 WHERE KUNNR EQ ITAB_OPG1-KUNNR.
V_CNT1 = SY-TABIX MOD 2.
IF V_CNT1 EQ 0.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ELSE.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
ENDIF.
* Selecting Bank Name and Cheque Number
SELECT SINGLE CHECT HBKID INTO (PAYR-CHECT , PAYR-HBKID)
FROM PAYR WHERE
ZBUKR EQ P_BUKRS AND
VBLNR EQ ITAB_DISPLAY1-BELNR AND
KUNNR EQ ITAB_DISPLAY1-KUNNR .
SELECT SINGLE BANKS BANKL INTO (T012-BANKS , T012-BANKL) FROM
T012 WHERE BUKRS EQ P_BUKRS AND
HBKID EQ PAYR-HBKID.
SELECT SINGLE BANKA INTO BNKA-BANKA FROM BNKA WHERE
BANKS EQ T012-BANKS AND
BANKL EQ T012-BANKL .
WRITE :/2 ITAB_DISPLAY1-BUDAT ,
14 ITAB_DISPLAY1-BELNR ,
26 ITAB_DISPLAY1-BLDAT ,
40 ITAB_DISPLAY1-XBLNR ,
58(16) PAYR-CHECT ,
75 BNKA-BANKA ,
105(40) ITAB_DISPLAY1-SGTXT ,
146(4) ITAB_DISPLAY1-BLART .
* Determinig Debit or Credit
IF ITAB_DISPLAY1-SHKZG EQ 'S'.
V_DEBIT_TOTAL1 = V_DEBIT_TOTAL1 + ITAB_DISPLAY1-DMBTR.
WRITE:151(18) ITAB_DISPLAY1-DMBTR ,
171(18) SPACE .
ELSEIF ITAB_DISPLAY1-SHKZG EQ 'H'.
V_CREDIT_TOTAL1 = V_CREDIT_TOTAL1 + ITAB_DISPLAY1-DMBTR.
WRITE:151(18) SPACE ,
171(18) ITAB_DISPLAY1-DMBTR .
ENDIF.
CLEAR : T012 , BNKA , PAYR .
ENDLOOP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/(190) SY-ULINE.
* Displaying Debit and Credit Totals
WRITE:/125 TEXT-001 ,
151(18) V_DEBIT_TOTAL1,
171(18) V_CREDIT_TOTAL1 .
WRITE:/(190) SY-ULINE.
* Displaying the Closing Balance
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
V_CLOSE_BAL1 = ITAB_OPG1-BAL1 + V_DEBIT_TOTAL1 - V_CREDIT_TOTAL1 .
IF V_CLOSE_BAL1 GT 0.
WRITE:/122 TEXT-002 ,
151(18) V_CLOSE_BAL1 NO-SIGN. " D00K909674
ELSEIF V_CLOSE_BAL1 LE 0.
WRITE:/122 TEXT-002 ,
171(18) V_CLOSE_BAL1 NO-SIGN. " D00K909674
ENDIF.
CLEAR : V_CLOSE_BAL1.
ENDLOOP.
ENDFORM. " F_006_DISPLAY_LIST1
*****************dispaly list 2 ending here*********************
Thanks,
Sankar MHi,
Can you post it as two halves ?
Regards,
Swarna Munukoti -
Help with taking a pic with Android camera and adding pic to display list
Hi,
My students and I have not been able to make an AIR app that can take a picture using the devices camera and then add the image to the display list. We are able to open the devices camera and of course take a picture, but that's it.
We've been using these two tutorials/examples:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/fla sh/media/CameraUI.html
and
http://tv.adobe.com/watch/adc-presents/input-for-mobile-devices-camera /
I've uploaded our project: http://www.dayvid.com/professor/camera.zip
Can someone help us out?
Thanks!
Below is the main document class:
package {
import flash.desktop.NativeApplication;
import flash.display.Loader;
import flash.display.MovieClip;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.events.ErrorEvent;
import flash.events.Event;
import flash.events.IOErrorEvent;
import flash.events.MediaEvent;
import flash.media.CameraUI;
import flash.media.MediaPromise;
import flash.media.MediaType;
import flash.events.MouseEvent;
public class Main extends MovieClip{
private var deviceCameraApp:CameraUI = new CameraUI();
private var imageLoader:Loader;
public function Main()
this.stage.align = StageAlign.TOP_LEFT;
this.stage.scaleMode = StageScaleMode.NO_SCALE;
camera_btn.addEventListener(MouseEvent.CLICK, cameraBtnClicked);
private function cameraBtnClicked(event:MouseEvent):void
if( CameraUI.isSupported )
result_txt.text = "Initializing camera...";
deviceCameraApp.addEventListener( MediaEvent.COMPLETE, imageCaptured );
deviceCameraApp.addEventListener( Event.CANCEL, captureCanceled );
deviceCameraApp.addEventListener( ErrorEvent.ERROR, cameraError );
deviceCameraApp.launch( MediaType.IMAGE );
else
result_txt.text = "Camera interface is not supported.";
private function imageCaptured( event:MediaEvent ):void
result_txt.text = "Media captured...";
var imagePromise:MediaPromise = event.data;
if( imagePromise.isAsync )
result_txt.text = "Asynchronous media promise.";
imageLoader = new Loader();
imageLoader.contentLoaderInfo.addEventListener( Event.COMPLETE, asyncImageLoaded );
imageLoader.addEventListener( IOErrorEvent.IO_ERROR, cameraError );
imageLoader.loadFilePromise( imagePromise );
else
result_txt.text = "Synchronous media promise.";
imageLoader.loadFilePromise( imagePromise );
showMedia( imageLoader );
private function captureCanceled( event:Event ):void
result_txt.text = "Media capture canceled.";
NativeApplication.nativeApplication.exit();
private function asyncImageLoaded( event:Event ):void
result_txt.text = "Media loaded in memory.";
showMedia( imageLoader );
private function showMedia( loader:Loader ):void
this.addChild( loader );
private function cameraError( error:ErrorEvent ):void
result_txt.text = "Error:" + error.text;
NativeApplication.nativeApplication.exit();Hi,
My students and I have not been able to make an AIR app that can take a picture using the devices camera and then add the image to the display list. We are able to open the devices camera and of course take a picture, but that's it.
We've been using these two tutorials/examples:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/fla sh/media/CameraUI.html
and
http://tv.adobe.com/watch/adc-presents/input-for-mobile-devices-camera /
I've uploaded our project: http://www.dayvid.com/professor/camera.zip
Can someone help us out?
Thanks!
Below is the main document class:
package {
import flash.desktop.NativeApplication;
import flash.display.Loader;
import flash.display.MovieClip;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
import flash.events.ErrorEvent;
import flash.events.Event;
import flash.events.IOErrorEvent;
import flash.events.MediaEvent;
import flash.media.CameraUI;
import flash.media.MediaPromise;
import flash.media.MediaType;
import flash.events.MouseEvent;
public class Main extends MovieClip{
private var deviceCameraApp:CameraUI = new CameraUI();
private var imageLoader:Loader;
public function Main()
this.stage.align = StageAlign.TOP_LEFT;
this.stage.scaleMode = StageScaleMode.NO_SCALE;
camera_btn.addEventListener(MouseEvent.CLICK, cameraBtnClicked);
private function cameraBtnClicked(event:MouseEvent):void
if( CameraUI.isSupported )
result_txt.text = "Initializing camera...";
deviceCameraApp.addEventListener( MediaEvent.COMPLETE, imageCaptured );
deviceCameraApp.addEventListener( Event.CANCEL, captureCanceled );
deviceCameraApp.addEventListener( ErrorEvent.ERROR, cameraError );
deviceCameraApp.launch( MediaType.IMAGE );
else
result_txt.text = "Camera interface is not supported.";
private function imageCaptured( event:MediaEvent ):void
result_txt.text = "Media captured...";
var imagePromise:MediaPromise = event.data;
if( imagePromise.isAsync )
result_txt.text = "Asynchronous media promise.";
imageLoader = new Loader();
imageLoader.contentLoaderInfo.addEventListener( Event.COMPLETE, asyncImageLoaded );
imageLoader.addEventListener( IOErrorEvent.IO_ERROR, cameraError );
imageLoader.loadFilePromise( imagePromise );
else
result_txt.text = "Synchronous media promise.";
imageLoader.loadFilePromise( imagePromise );
showMedia( imageLoader );
private function captureCanceled( event:Event ):void
result_txt.text = "Media capture canceled.";
NativeApplication.nativeApplication.exit();
private function asyncImageLoaded( event:Event ):void
result_txt.text = "Media loaded in memory.";
showMedia( imageLoader );
private function showMedia( loader:Loader ):void
this.addChild( loader );
private function cameraError( error:ErrorEvent ):void
result_txt.text = "Error:" + error.text;
NativeApplication.nativeApplication.exit(); -
Media browser in Premiere CS 6 doesn't display list of hard drives!
My media browser in Premiere CS 6 doesn't display list of hard drives. There is no dropdown of folders or anything to select the media from. Any suggestions as to why this is happening and how I can correct this?
If Premiere is acting weird try this:
Start Premiere with holding down shift+alt until welcome screen.
See if that will help. -
Noobie question: How do I add something to the display list from a non-main class?
I know how to use addChild() within the main class to add
something to the stage display list and have it appear on the
screen, but how do I add something to the stage display list from
code within another class?
So for example say I want to add some text (myTextField) to
the stage's display list from within NotTheMainClass' code, could
you give an example of the necessary code?you must pass a reference to a display list object or create
one that's available to your class.
there are so many ways to do this i'm not sure how you want
to proceed. but you can create a globally available reference to
the stage and root timeline: -
Hi experts,
i am using one standard function module in my program. i am calling this program using a submit and return statement in another program.In the standard funtion module one write statement is used. My issue is once the function module is called and the program is returning to the main program. once it is returned the main program got stopped and going to the next screen and showing the list whatever which is written by using write statement. i think this is happening because of the return statement. but i want to suppress the display list.
Thanks in advance.
ArulUse addition EXPORTING LIST TO MEMORY of the SUBMIT statement.
Like:
SUBMIT report EXPORTING LIST TO MEMORY
AND RETURN.
Regards,
Naimesh Patel -
Is the "Display list of web app items submitted by a user" feature not available in the free trial? I can see it in the tutorials but its not available when I am logged in.
Its just named a little differently now. You should be able to add the module {module_webappscustomer} through the Modules toolbox in the web page editor window, as indicated below. Please note that webapps feature is available only for webCommerce sites. Read more about the available modules and its usage in detail here - http://kb.worldsecuresystems.com/134/bc_1345.html?bc-partner#main_Web_App_Modules
Thanks,
Vinayak -
How to display list process, when i run sql*loader in c#
Hello,
How to display list process, when i run sql*loader in c#. I mean when i run sql*loader from cmd windows, i get list process how many row has been inserted. But when i run SQL*Loader from C#, i can't get process SQL*Loader.
This is my code:
string strCmd, strSQLLoader;
string strLoaderFile = "XLLOAD.CTL";
string strLogFile = "XLLOAD_LOG.LOG";
string strCSVPath = @"E:\APT\WorkingFolder\WorkingFolder\sqlloader\sqlloader\bin\Debug\8testskrip_HTTP.csv";
string options = "OPTIONS (SKIP=1, DIRECT=TRUE, ROWS=1000000,BINDSIZE=512000)";
string append = "APPEND INTO TABLE XL_XDR FIELDS TERMINATED BY ','";
string table = "OPTIONALLY ENCLOSED BY '\"' TRAILING NULLCOLS (xdr_id,xdr_type,session_start_time,session_end_time,session_last_update_time,session_flag,version,connection_row_count,error_code,method,host_len,host,url_len,url,connection_start_time,connection_last_update_time,connection_flag,connection_id,total_event_count,tunnel_pair_id,responsiveness_type,client_port,payload_type,virtual_type,vid_client,vid_server,client_addr,server_addr,client_tunnel_addr,server_tunnel_addr,error_code_2,ipid,c2s_pkts,c2s_octets,s2c_pkts,s2c_octets,num_succ_trans,connect_time,total_resp,timeouts,retries,rai,tcp_syns,tcp_syn_acks,tcp_syn_resets,tcp_syn_fins,event_type,flags,time_stamp,event_id,event_code)";
strCmd = "sqlldr xl/secreat@o11g control=" + strLoaderFile + " LOG=" + strLogFile;
System.IO.DirectoryInfo di;
try
System.Diagnostics.ProcessStartInfo cmdProcessInfo = new System.Diagnostics.ProcessStartInfo("cmd.exe");
di = new DirectoryInfo(strCSVPath);
strSQLLoader = "";
strSQLLoader += "LOAD DATA INFILE '" + strCSVPath.ToString().Trim() + "' " + append + " " + table;
StreamWriter writer = new StreamWriter(strLoaderFile);
writer.WriteLine(strSQLLoader);
writer.Flush();
writer.Close();
// Redirect both streams so we can write/read them.
cmdProcessInfo.RedirectStandardInput = true;
cmdProcessInfo.RedirectStandardOutput = true;
cmdProcessInfo.UseShellExecute = false;
cmdProcessInfo.LoadUserProfile = true;
//System.Diagnostics.Process.Start("CMD.exe", strCmdLine);
// Start the procses.
System.Diagnostics.Process pro = System.Diagnostics.Process.Start(cmdProcessInfo);
// Issue the dir command.
pro.StandardInput.WriteLine(strCmd);
// Exit the application.
pro.StandardInput.WriteLine("exit");
//Process[] processlist = Process.GetProcesses();
//foreach(Process pro in processlist){
Console.WriteLine("Process: {0} ID: {1}", pro.ProcessName, pro.Id);
Console.WriteLine(pro.StandardOutput.ReadLine());
// Read all the output generated from it.
string strOutput;
strOutput = pro.StandardOutput.ReadToEnd();
pro.Dispose();
catch (Exception ex)
return;
finally
Thanks.friend
sqlldr is an application residing in the OS. procedure runs in the dbms engine.
you cannot run an os command directly from a procedure or a function or a package .
If you want to do so you need to use either a daemon process created by a PRO*C program
or a JAVA stored procedure to do so.
just refer to previous question forums, you can find the solution. Somebody has already given a solution using
java to run an OS command . check it out
prakash
[email protected] -
Replacing items in the display list
I have a series of objects in a display, half of which have to be updated regularly. The items are originally added to the display list in pairs and are of 2 different types. My display list look like this:
object1
object2
object1
object2
object1
object2
To update the display list, I delete half of the objects, so my list now looks like this:
object1
object1
object1
I now want to add the updated objects to the list, but doing so makes the list look like this so the objects no longer alternate:
object1
object1
object1
object2
object2
object2
Is there a better way to think about deleting and adding objects to the display list so I can maintain my alternating list?
Thank you!So, you mean to say that the objects will be displayed one after the other? just like a list? if so, go with list with itemrenderers, ArrayCollection + filters / sorting. All you do is maintain the data in a order, the list wil take care of displaying the itemrendderers .. this way it is more maintainable and scalable.
-
Simple Web Application - To display list and then details
Hello All,
I am trying to build simple classifieds web application using - JSP, MySQL.
I am little confused how to achieve following using JSP - for example -
Craigslist can display list of classifieds and when clicked on individual classified - the record is shown as Static HTML file -
http://newyork.craigslist.org/mnh/cpg/708366015.html
http://newyork.craigslist.org/mnh/cpg/708343755.html
How can i achieve the same results dynamically - i mean, how can i create a static HTML page using information in database and put that static HTML file on server so it can be picked up by search engines ...
I am new to java guys .. so please show me some light or explain me how do i code this using JSP.
Thank you,
JagdishHow can i achieve the same results dynamically - i mean, how can i create a static HTML page using information in database
and put that static HTML file on server so it can be picked up by search engines ...By definition a dynamic html page doesn't exist, so how would a search engine find something that doesn't exist? -
Module - adding to display list, container null?
So I'm working on a module inside one of our applications and when the module is loaded it is passed a VO. I have found that I need to fire all of my other logic for the nested classes inside this module on the Set method of this VO because if I wait for the creationComplete, the nested logic in the other classes never gets executed. The only problem is, when I fire off all of my logic on the Set, it all gets executed but when it goes to draw these components and add them to the display list, the container they're being added to is still null, I assume because it hasn't been created yet. I also tried to add my components in the MXML and just bind their data value to the VO, but even when I do that, the inner logic never gets executed, I assume for the same reason.
Has anyone else had this issue before or have any ideas on a way to solve this issue? It almost feels like waiting for CreationComplete is too late, yet the Set method is too early.
Thanks,
BKNot sure I understand. You can hook other lifecycle methods in the module
like commitProperties. That's where we recommend custom components resolve
new properties. -
I was reading that "a long option display "list" could improve a user uses of an application".
I cant find out what this means
anyone know?
Thanks
Martinignore this post, i read something wrong
-
Question about timeline navigation and the display list-
I’ve got a movieclip called “rotatorProxy” that spans the entire timeline. I’ve got nav buttons that jump to various frames on that timeline. I need to get the display depth of rotatorProxy each time the nav buttons move the playhead. The AS3 code is easy enough:
var zIndex:int = this.getChildIndex(getChildByName("rotatorProxy")) ;
my problem is where to put it. If I put this code in any script that executes in the target frame, it works, but only if I hit the nav buttons slowly. If I bang on a single nav button rapidly, getChildByName("rotatorProxy”) can return null. I don’t know much about how the display list works but I assume the display list is rebuilt after every jump and the frame scripts are executing asynchronously, so it’s possible my getChildByName call is executed before the display list is complete. Is there an event or some other handle that would allow me to call my code before the frame is rendered but after the display list is complete?Wow, thanks for the fast response...
“if rotatorProxy exists in all frames, it should never return null.”
That’s what I thought, but not what I’m seeing, rapidly jumping around on the timeline seems to confuse the player and it temporarily looses track of rotatorProxy.
You can sort of see it in action here: http://www.appliedcd.com/newACT/act.html
The zIndex is used to establish the depth of the rotating screens which have been added to the display list via AS. If you bang on the nav buttons quickly you’ll see the stacking order screw up, if you had been in the development environment you’d see the null error thrown.
I’ll see if I can use the render event to sort this out. I know testing in the frame after the jump will work, but it’s cleaner if I can establish the proper stacking order before the first jump frame is rendered.
Maybe you are looking for
-
Which data sources Can i use for Vendor line items
Dear Experts, I want to load the Vendor Line Items Data.In Rsa5 I found 0fi_ap_3: Vendors: Line Items 0fi_ap_4: Vendors: Line Items with Delta Extrcation 0fi_ap_30: Vendor Line Items What is the differences of the 3 Datasources. Which Datasource can
-
All of a sudden i can no longer air print from my iphone 4S or my ipad 2 Need help I can still air print from my Dell laptop
-
What's the right way to move folders into a new library ?
I'm going to transfer my photos from PC to iMac using USB flash drive. I organized all the folders with files on the PC's desktop, some by year, others by themes. I'll transfer folder by folder. With each transfer I'll go to iPhoto and will create a
-
Map Viewer SRS Parameter (WMS service)
Hello, In MapViewer WMS documentation it is mentioned, that two SRS parameter values are supported: SDO:8307 and EPSG:4326. We try to access WMS server using MapInfo Professional as client, but it reports that SDO:8307 projection is not supported by
-
Setting the Administrator password on a MDT Server Task Sequence
I've created a SCCM 2012 R2 CU3 MDT 2013 task sequence using the Server Task Sequence template to deploy Windows Server 2012 R2. I'm not doing a capture but just using the .wim file from the source DVD. The problem I'm having is setting the local adm