Display Messagebox From WCF

Hi
I am developing a project having two solutions one for WCF and another for WEB. I want to display a messagebox from WCF so that the user can see the message. How can i do it? What is the best method to do it? 
Thanks

Hi,
Based on my understanding, for this scenario, if you want to show message from WCF, you could invoke the corresponding WCF service from Web application. And display the return message to the users in the web application.
First you could create the WCF services, and host the WCF service so that you could invoke the service.
Then, add the service reference in your web application and invoke the methods provided by the WCF services, and show the result to the user in your web application.
For more information, you could refer to:
http://www.c-sharpcorner.com/UploadFile/013102/creating-wcf-service-iis-hosting-and-consuming/
Regards

Similar Messages

  • Help, how to open and display blobs from tables

    Dear all,
    I am trying to store ms-word files on a table using a blob column.
    Does anyone how to open the files and display them from a form using 9iAS?
    Thank you.
    Carlos.

    And there may be, but you won't likely find that here. Do some time searching Google and maybe you'll find code that someone was nice enough to make freely available, although I wouldn't count on it. Were i a programmer and took the time to read those docs and write the code, I'd want to be paid for my time. But there are a lot of programmers who swear by freeware! You may get lucky.

  • Display reports from BW using WAD on blackberry

    Hi All,
    I have to display reports from BW using WAD on blackberry
    can any one please guide me how to do it?
    awaiting Reply
    Thanks & Regards
    Prasad

    you have to integrate SAP Mobile infrastrcture with BW system to achive this.

  • Displaying jpegs from folder

    Hi,
    I would like to display jpegs from a folder, and be able to somehow scroll through them?
    So far i have been able to display them by using listfolder and linking it to a for loop containing readjpeg, but this basically creates a slideshow of jpegs. I would like to control which jpeg is being displayed by having 2 buttons, one to go through the pictures, and one to go backwards. .
    I hope this makes sense, I'm new to LabVIEW.
    Any help would be greatly appreciated!
    Attachments:
    VIEW_JPEG.vi ‏14 KB

    here is one simple possibility. 'hope it make sense.
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    VIEW_JPEG_MOD.vi ‏22 KB

  • Displaying fields from a Z Table on CRM UI

    Hello Experts
    I am trying to display fields from a custom table onto a CRM UI form view.
    1. I created a custom GENIL root object & Search object ie. ZCUSTOMER. & ZCUSTSEARCH
    2. Tested this in the GENIL BROWSER to ensure that I could enter update values to the table and retrieve it via the search object.
    3. Created a custom component ZCUSTOMER
    4. Created a view with this component ZCUSTOMER using the wizard -
         Model Name - CUSTINFO
         BOL Entity - ZCUSTOMER
         No links to the custom controller or higher level objects.(as I do not want to tie this to any standard components)
    Type of view - Form view
    7. Created a Context node for the component controller with the same info as I did for the view.
    8. Performed the binding of the view context node with the component controller context node.
    9. Configured 1 field CUST_NAME to be displayed on the view.
    10. Configured the run time repository to display the view.
    Now the issue is..
    When the view gets displayed, the field is displayed with the error "CUST_NAME not bound"
    What am i missing?
    Thanks
    RLX

    Hi Swati,
    Thanks for the feedback. I re-viewed the WD_CREATE_CONTEXT method of the view controller implementation class and I see the following code in there already-
    method WD_CREATE_CONTEXT.
      create the context
        context = cl_bsp_wd_context=>get_instance(
              iv_controller = me
              iv_type = 'ZL_ZCUSTOMER_BSPWDCOMPONEN_CTXT' ).
        typed_context ?= context.
    endmethod.
    Does that look right or do I need to modify it?
    Thanks once again for the help.
    RLX

  • Issue with display data from infoset

    Dear Experts,
    When I am trying to display data from BI INFOSET in (Execute in background ctrl+F2)backend it is working fine but when in try to run the execution in forground (execute F8) then the system gets hang.. and time out. could any one has this kind of experience. if so kindly let me know do i need to implement any patch or  else which way i can do work to resolve this issue.
    Thanks in advance.
    Mannu

    Hi Krishna,
    I have tried as you have suggested ie. using Tcode RSISET for displaying data but still i have the same issue.
    Could any one post any additional suggestions to follow.
    Thanks in advance,
    Mannu

  • Display data from a virtual InfoCube

    Hi experts,
    When I tryed to display data from the virtual InfoCube 0FIGL_V40, I've got a dump.
    Please help me to solve this problem.

    Dear Akshay,
    Is it possible that the problem comes from R/3 since when I check the extractor 0FI_GL_40 with the RSA3 Tcode I've got the message:
    Errors occurred during the extraction --- Message no. RJ012
    I think that the pb has been solved by switching on the business function "Reporting Financials" . Inthe SAP source System -> TA: SFW5. Turn on Reporting Financials. Then I've no pb while testing the extractor.
    Pb solved.
    Many thanks
    Youness
    Edited by: Youness NAJI on Jan 13, 2010 4:39 PM

  • Display Data from multiple models in one table

    Hi Experts,
    Is it possible to display data from multiple models in one table smltnsly.
    I have created a table dynamically.Now I would like to display data from multiple models... If this possible,can anyone give me a lead as to how to do it..
    Regards
    SU

    Hi
    Your Model Nodes be
    Model1
    ---Output_Model1
    Attrib1
    Attrib2
    Model2
    ---Output_model2
    Attrib1
    Attrib2
    and the value node is
    ValueNode
    ---Attrib1
    ---Attrib2
    Now the coding.
    int size;
    IPrivate<ViewName>.IOutput_mode1Node  node1 = wdContext.nodeOuptut_Model1();
    IPrivate<ViewName>.IValueNodeElement elem;
    size = node1.size();
    for(int i=0; i<size; i++)
       elem = wdContext.createValueNodeElement();
       elem.setAttrib1( node1.getOutput_Model1ElementAt(i).getAttrib1() );
       elem.setAttrib2( node1.getOutput_Model1ElementAt(i).getAttrib2();
       wdContext.nodeValueNode().addElement( elem );
    similar code for Model Node 2
    Regards
    Abhimanyu L

  • Display data from BLOB column.

    Hi All,
    I want to display data from blob datatype field, which contains HTML and GIF both files.
    If I set it's property from file format IMAGE then i get data only gif.
    if anybody have answer plz revert back...
    awaiting...
    Juned

    Hi Juned
    What I suggest is that you may have overlapping fields. One to show HTML and other to show GIF. You need to add one more column to your table in order identify if the BLOB is GIF or HTML.
    In the Format Trigger of each of these two fields, inspect the value of flag column and hide one field if the datatype is not its type.
    For instance, if flag field is 0 then hide Image field and show HTML field. If flag field is 1 then show Image field and hide HTML field.
    Regards
    Sripathy

  • Display data from multiple document Libraries in List View Webpart

    Hi All,
    I want to display data from multiple document libraries into one list view webpart(custom i have created)
    I went through the following link http://blogs.msdn.com/b/ramg/archive/2009/04/22/implementing-a-simple-cross-site-collection-list-view-webpart.aspx
    but it tells to display only from one document library.
    My motive behind displaying data in the list view webpart is to achieve the functionality of Check In ,Check Out and other OOB features.
    With Regards,
    Jaskaran Singh

    Hi,
    As there is no such OOTB feature, a workaround is to create a visual web part to gather items from libraries and implement functionalities like Check in, Check out files
    in different libraries.
    The links below will provide more details:
    Create Visual Web Parts in SharePoint
    2010
    A demo about displaying list items in visual web part:
    http://www.dotnetcodesg.com/Article/UploadFile/2/217/Web%20Part%20in%20SharePoint%20To%20Show%20All%20List%20and%20List%20Items.aspx
    About the Check In and Check Out:
    How to Check In a document programmatically
    SPFile.CheckIn method
    and SPFile.CheckOut method
    Best regards
    Patrick Liang
    TechNet Community Support

  • Display data from diferent tables

    My requirement is to display data from diferent tables supose tables likeVBAK and VBAP.it will allow for all entries concept oops abap?.
    how to write code for display data from diferent tables .
    method WDDOINIT.
    data:
    node_sflight type  ref to if_wd_context_node,
    Itab_sflight type standard table of SFLIGHT.
    select * from SFLIGHT into table Itab_sflight.
    node_sflight = wd_context->get_child_node( name = 'SFLIGHT_NODE' ).
    node_sflight->bind_table( itab_sflight ).
    endmethod.
    Thanks,
    Rama

    HI,
    IS IT CORRECT WAY OF DONIG CODING?
    IF I AM WORNG PLEASE SUGEST ME.
    method WDDOINIT.
    data:
    node_sflight type ref to if_wd_context_node,
    final type standard table of vbap.
    types: begin of t_vbak,
    vbeln type vbak-vbeln,
    end of t_vbak.
    endmethod.
    data wa_vbak type t_vbak.
    data i_vbak type standard table of t_vbak.
    types: begin of t_vbap,
    vbeln type vbap-vbeln,
    posnr type vbap-posnr,
    matnr type vbap-matnr,
    end of t_vbap.
    data wa_vbap type t_vbap.
    data i_vbap type standard table of t_vbap.
    select vbeln from vbak into table I_vbak.
    select vbeln posnr matnr from vbap into table I_vbap
    for all entries in I_vbak
    where vbeln = i_vbak-vbeln.
    loop at I_vbak.
    read table i_vbap with key vbeln = I_vbak-vbeln.
    final-vbeln = I_vbap-vbeln.
    final-posnr = I_vbap-posnr .
    final-matnr = I_vbap-matnr .
    append final.
    clear final.
    endloop.
    node_sflight = wd_context->get_child_node( name = 'NODE_VBAP' ).
    node_sflight->bind_table( final ).
    endmethod.
    Thanks,
    rama

  • Display data from CSV file in iWeb page

    Hi,
    I like to display data from a CSV file in iWeb page if a date value from CSV file matches todays value from the system. Here is an example.
    CSV data values
    01/20/2011,Sunny,87
    01/21/2011,Cloudy,100
    01/22/2011,Rainy,60
    If today's date value is 01/21/2011 the page should display 01/21/2011 Cloudy 100 in a tabular format.
    Appreciate your help in providing HTML code for this issue.
    Thanks

    I suspect there is a soft return in the excel database somewhere that can't be seen. Take the csv/txt file into notepad and look for a line that starts oddly compared to the others.
    I haven't had luck removing soft returns from excel files so I do this a rather odd way. I take the excel file into InDesign as a table, and then use find/change to replace any soft returns with nothing, then convert the text to table and then export the text out again by going export, and selecting text from the dropdown menu.
    For my money, I always save tab delimited text files from excel so that if a field does contain commas, it doesn't "trick" indesign into thinking a new field is beginning or not... instead the field delimiters are tabs and they are unlikely to have been used in the excel database.
    If you do choose to use this indesign import method of mine to clean up the database, i also noticed two things in your screengrab: first was that some fields have spaces at the start of the text... easy enough to fix with a GREP that looks for ^\s (start of a sentence followed by a space) and replace with nothing. The second thing is the T&C field that all entries (at least in the screengrab) all start the same – if all entries in the database start the same, couldn't that line be in the indesign file? Its only a small detail I know.

  • Why is Mail 6.2 not displaying messages from my Exchange account?

    Greetings,
    I have a new 13" MacBook Air running Mountain Lion and I'm noticing that most of the time my Mail inbox is not displaying messages from my work Exchange account; however, it does display messages correctly for my Gmail account.  I've included a screen shot of what I'm experiencing.
    Any ideas?
    Thanks,
    Garry

    I have the same problem, as does a coworker. It happens, for instance, if I click on another mailbox (such as Junk) then go back to the inbox. Our company uses Exchange. Quitting mail usually fixes it. A rebuild of the mailbox will too.  Only happens on my Mac at work, not my Mac at home (connected via VPN).
    Another problem I have is with mail not syncing. Mail I have deleted from another device (such as on my Mac at home or my iPad) does not get deleted from my inbox at work. Sometimes they'll go away when I click on them. Other times they won't go away and the only way to delete them is to rebuild the mailbox.
    And lately I have had problems with attachments. Attachments sent from my Exchange account at work show up as .eml attachments in my iCloud account and mime attachments on my iPad or as a string of characters (20-30), not as an attachment. This happens whether sent from home or work.
    I have our IT department looking into the third problem (which is the most vital one for me).  I'll report the other two annoying problems and see what they can figure out.

  • Display Columns from WBS and Activities in the same Report

    Does anyone know how to display Columns from a WBS and an Activity together so that they can be output to Excel?
    I need WBS Code, Actual Start, Actual Finish and Performance % Complete from the WBS and Activity Codes from Activities.
    I can produce them in a report but this gives me all the activities in a heirarchical format which then necessitates deleting the activity lines in Excel
    The Performance % complete which I want is available in Activities at the Summary Level but the Activity Codes are not at this level
    I could put the Activity Codes in as Project Codes at the WBS level but this will require a lot of maintenance
    Maybe someone knows an easy way to do this?
    John
    Edited by: user9088233 on Feb 3, 2010 11:50 PM

    user9088233,
    Your request interested me so I gave it the old college try. There are several ways to go about this task but here's one that is fairly quick and easy.
    I carefully read your description of what you need from P6. I've built a test layout using the fields that you outlined. Here's what I came up with. This should bypass the issue of having to create a P6 export. My solution is to build a customized layout in P6 and copy that info and paste it into an Excel spreadsheet.+
    Open P6
    Open neccessary projects & open a new layout containing these columns:
    ....Project, WBS,Activity ID, Activity Name, Perf. %, & (any codes or user defined codes)
    Group & Sort by: Project, WBS
    ....*Display Options* = "Show Group Totals" & "Show Summaries Only", Choose "OK"
    ....*Edit*, Select, All, Copy
    Open Excel
    ....Paste Highlighted data into your new worksheet.
    Hope this helps but it's usually hard to understand exactly what you need unless I can view your data,
    Good Luck & let me know how it turns out,
    p3_scheduler
    Edited by: p3_scheduler on Feb 8, 2010 2:40 PM

  • Report not displaying data from one of the infoproviders

    Hi Experts,
    Issue: Report not displaying data from one of the infoproviders
    I have a report 'ReportA' which has multiprovider MP1 as the source.
    MP1 has two Infocubes IC1, IC2 in its design.
    Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
    Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
    Please reply.
    Regards,
    Suraj S Nair

    Hi All,
    When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
    I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
    Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
    I checked the Characteristics, all of them are assigned corectly.
    Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
    Regards,
    Suraj S Nair

Maybe you are looking for