Display not functioning fully.

I bought a LG M2452D-PU monitor and am hooking it up to my late 2008 Al. Macbook using a HDMI cable and mini-displayport adapter. It won't display in the advertised 1920 x 1080 resolution. Why not?

I've messed around with it a bit more now and I think I can explain the issue in more detail. (I am using the monitor as a second display, aka, not mirroring) In the display settings for the second monitor there is a list of resolutions. The highest specific resolution I can choose is 16xx by 10xx and then I have to check the overscan box to make it fill the screen. This distorts the image more then I'd like. The best image I've gotten so far is using the 1080p resolution and overscaning it. This should be 1920 x 1080 but when I use an image of that resolution as a desktop background it blows it up too big cutting off the edges. When I don't overscan, the image and the usable screen is smaller then the actual screen.
Does this mean the LG M2452 doesn't have 1:1 pixel mapping for 1920 x 1080?
Also, thanks for your reply, Steve.

Similar Messages

Photosmart 7510 display not functioning.

model C311a
Product # CQ877A
printer is working.
I can scan from computer utility.
dsiplay screen is blank/black.
I cannot copy without functioning screen.
Has anyone experienced a black dsiplay screen. How can I resolve this?
DK

Hi @dakarch , and welcome to the HP Forums!
I see you are experiencing black display issues. I would like to help!
I'd recommend starting by performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest plugging the printer power into a different wall outlet.
I'd also recommend running this update:
Critical Update
Another suggestion would be to follow the steps laid out in this document:
Blank Control Panel Display
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Keys not functioning on bluetooth keyboard

I have replaced the battery on my bluetooth mouse and now my bluetooth small keyboard is not functioning fully.
The middle row of keys and ones to the left and right are not responding. The shift lock light doesn't come on either.
I've replaced the batteries in the keyboard too, just in case, although the indications were that the battery life was OK. I get the green light when turning it on but still no function on some of the keys.
Has changing the battery in my mouse affected my keyboard? Is it something to do with Universal Access? Mouse Keys are off.
Any help gratefully received. Thanks.

It's the one that came with my imac which was purchased 4 months ago. Everything was working fine then I packed it all up to go home for Christmas two weeks ago. Set it up at home and had these issues with both mouse and keyboard when I turned it on. So changed battery in mouse and that's OK but no joy with the keyboard.

Multi-touch display is not functioning as normal

multi-touch display is not functioning as normal on the right half of the screen....

Hi James,
Thx for the quick reply...
I have already tried most of these troubleshooting steps but no go....
Also, when you tap or use only the right half of the screen, the touch display is inconsistent and makes a wierd sound [ like a hollow tub or something ] and it's not a cosmetic issue...
----Apple store / Authorized Service Center is still working on this ongoing issue with no results and still not confirming for the iphone replacement...Thnx..

I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

I'm not clear on exactly what it is you're asking, but if you're referring to changing opacity, you can change the opacity setting for the States of a menu item via the States panel and Control Strip.

Fairly certain that FileStream.writeObject() and FileStream.readObject() do not function - at all -.

I've struggled with this since Jan 9th, 2013 (if not longer) and the only conclusion I can come to is that this simply does not function. No matter what I try and no matter what resource (and I'm finding precious few) I follow to try to implement this within Flash Builder 4.7, Flex SDK 4.6.0 (Build 23201), AIR SDK 3.5, I only succeed in creating a file (with the correct name) that is 123 bytes in size that reads back in as NULL;
I've tried using ByteArray.writeObject()/readObject() as an intermediary with FileStream.writeBytes()/readBytes(), with no luck.
I've tried instantiating an object, setting properties and then using that. I've tried instantiating my correctly formed ValueObject (including the remoteClass alias metadata tag).
I've tried using -verbatim- the example provided in the top most suggested 'Community Help' resource http://www.switchonthecode.com/tutorials/adobe-air-and-flex-saving-serialized-objects-to-f ile It is worth noting that this solitary example of the procedure/SDK-usage is dated to Flex SDK 3.0 and at least 04/04/2009 (first comment on the article).
My frustrating hell (one version of many methods attempted) is detailed on StackOverflow (including -all- mxml, as, and trace output), but so far, no assistance has been forthcoming, alas. This is a severely stripped down and simplified version of what had been a far more complex attempt:
http://stackoverflow.com/questions/14366911/flex-air-actionscript-mobile-file-writeobject- readobject-always-generates-null-w
An earlier post* detailing a far more complex attempt interation, with, alas, just as little help (guess this isn't a hot button topic) forthcoming:
http://stackoverflow.com/questions/14259393/flex-actionscript3-filestream-writeobject-fail s-silently-in-ios-what-am-i-doin
* I previously suspected that it was only failing from within iOS on an iPad, but the first example (the stripped down version) made it evident that it didn't work in the AIR mobile device simulator (iPad) in the Windows environment, and indeed, didn't work in a non-mobile project in the windows environment AIR launcher.
I'm at a loss, upset, frustrated, in major trouble with my supervisor/deadlines, etc.
I would very much appreciate any suggestions/help/confirmation/etc.
Just to move ahead with development I've opted for a far less preferable solution of writing out both an XML file and a JPG file. I very much do not like this and very much want to store encapsulated serialized objects locally in the same way I assume will work for storing remotely with AMFPHP (if the project ever gets to that point *sigh*).
Again. Would be so grateful for any help.

I want to add to this post as I marked it as "The Answer" though it does not indeed contain the answer directly, for those who come looking for simliar solutions.
harUI prompted me to realize that my metadata term needed to be capitalized (RemoteClass instead of remoteClass). As the metadata tags may be user defined, the compiler throws no errors (or warnings *grumble*)
package vo
    import flash.display.BitmapData;
   // [remoteClass(alias="PTotmImageVO")] incorrect
   [RemoteClass(alias="PTotmImageVO")]
    public class PTotmImageVO

Drop-down List not function in preview mode.

Hi all,
LiveCycle 8.2.1.4029
I have created a drop-down list and populated it with a text
However when I preview the form, the drop-down is displayed without the dropdown arrow and the options (text) are not displayed.
The drop-down list is the only object on the form.
If I load a form or xpd of a form created prior today the drop-down list displays and functions as normal.
Any ideas.
Thanks
WowRonin

Hi,
I uninstalled and reinstalled Acrobat and then patched to 9.4 and everything is back to normal.
Go figure!!
Thanks for responding.
WowRonin

PhotoSmart C309a wireless radio is not functioning. Does anyone know why that my be?

My printer used to work using my wireless network. It failed to print and a diagnostic told me the wireless radio was not working. Does anyone know why?

Hello,
"Wireless Radio Not functioning" usually indicates an issue with the wireless card in the Printer.
Please try below steps ..
While the Printer is ON, unplug the Power Cord from back of the Printer.
Wait for 30 seconds and then Plug in the Power Cord to the printer.
While the printer is displaying the home screen,.
Select Setup > Network > Wireless Radio : ON
on Printer display, Select Setup > Network > Print Network Configuration . Check if the printed diagnostic pages still displays " Wireless Radio Not Functioning" ? if Yes, Your Printer requires a SERVICE, hence Please call HP Support ( US ) 1-800-474-6836 .
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Direct Show causing "A device attached to the system is not functioning"

Hello,
I've been using direct show for about a year to connect to four webcams. I have an intermittent problem where by one of the cameras (at random) will not display the live feed. This could not happen for several weeks possibly months and then suddenly the
camera dies.
I run the following bit of code and receive error code -2147024865.
IMediaControl mediaCtrl = (FilterGraph)m_filterGraph as IMediaControl;
hr = mediaCtrl.Run();
DsError.ThrowExceptionForHR(hr);
In Hex this equates to 8007001F. From doing a bit of googling I found that this means a "A device attached to the system is not functioning".
No other application uses these webcams and nothing has changed to them physically. Direct Show, seems to make this camera unusable at random times.
Has anybody else experienced this problem and over came it?
Thank you in advance,
Mike

Hi Roman,
Thank you for your reply. I'm using a Logitech webcam and this camera is used by the Logitech controller software. This allows us to control the zoom, pan, focus and camera settings whilst connected to the camera in C# application. When this problem occurs,
the webcam device still shows up in device manager and the settings of the webcam state that the device is working properly.
I thought it may of been introduced by a possible memory leak that causes the camera to not respond, or that when the application closes it would leave the camera in a unusable state.
I've contacted Logitech to ask about drivers for the webcam and they state that it uses windows plug and play drivers. These are currently up to date.
The reason I thought that it may of been introduced by direct show is because these cameras have been used before on other products but using different software, Steribar (a software tool to use the view of a webcam as a cheap barcode reader), and haven't
experienced this problem with the cameras with this software. However very intermittently the custom C# app that I have created causes this problem.
Thank you for you time.
Mike

"A device attached to the system is not functioning"

Hi!
I'm hoping that all the smart people here can help with my problem. I help support/develop several custom windows application. One of these applications is written in Delphi and there is currently a problem with a feature a single computer owned by a client.The client's computer does have the latest version of adobe installed.
* The user is able to select a document from a data grid, and click a button to view that document (in this case a pdf).
* The document is saved from a database to the user's disk
* Using a shell command, the application asks windows to open that file.
Normally this works quite well, until recently. If this client tries to view a pdf file in this manor windows returns a system error, error 31, and the message "A device attached to the system is not functioning" is displayed. If I naviage to the location where the file was saved to an attemp to open it via double clicking, adobe reader opens the document right up. The application historically has had no problems with pdf's nor any other doucment type. If I change the file assoication from adobe to note pad, the application does open the file with note pad, but it is not readable. If I change it back to adobe reader, the problem persists. I've tried uninstalling adobe, reinstalling, and using a previous version of adobe. Any suggestions would be appreciated.
FYI, before someone tell's me I should be talking to microsoft, I am also inquiring on the windows side of this through msdn. Since I am not 100% sure if this is a windows or adobe reader issue I would appreciate suggestions on both sides.
Last but not least, incase it is of any help, this is the delphi command used to ask windows to open the file:
ShellExecute(GetDesktopWindow, 'open', PChar(TempFile), '', '', SW_SHOWNORMAL);
Any and all help is appreciated.
Thanks!
Louis

Is the computer in question connected to the Internet, and if so, is the Internet connection working correctly?
It is possible that Adobe Reader tries to check for updates when it is launched, then finds a faulty network connection.
Check the Device Manager for non-functioning network devices.
Also try http://fixitcenter.support.microsoft.com/ to find other potential problems on that system.

Pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 via blutooth (firmware prob) to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all

pioneer 8400 DVD receiver player, as iPhone ios6 update now when connecting the new iPhone with ios6 to my car DVD 8400 unit, when playing music such as on my phone or Pandora the track button does not function or work at all not even if i press skip track forward or back on the unit it doesn't function everything works except that. on listening to radio or anything else related not pairing thru Bluetooth unit works fine, seems there to be Bluetooth update that is not making iPhone and unit not compatible at all. does pioneer need fix this problem with update firmware or thru apple need help. my iPhone was working fine before with previous ios 5 before.

Dear Valued Pioneer Customer:
We would like to inform you of the availability of an optional Bluetooth® firmware update (HW05-SW01.27.20) that enables Bluetooth AVRCP control and metadata display from a compatible Pioneer CD or DVD Receiver when used with an iPhone® 5 or iOS 6 device. If you do not own an iPhone 5 or iOS 6 device, there is no need to install this update.
This firmware update may be used only with the following 2012 Pioneer products:
CD Receivers
DVD Receivers
DEH-P8400BH
DEH-P9400BH
DEH-80PRS
AVH-P2400BT
AVH-P3400BH
AVH-P4400BH
AVH-P8400BH
In order to perform this update, the following items are needed:
A Pioneer CD or DVD Receiver above with built-in Bluetooth
Laptop with built-in Bluetooth running Windows® 7
Bluetooth firmware update (HW05-SW01.27.20)
How to Obtain the Free Firmware Update
1. Download the INSTRUCTIONS for the optional Bluetooth firmware update (HW05_SW01.27.20).
2. Download the UPDATE FILE to a computer and transfer the file to a compatible 2012 Pioneer CD or DVD Receiver via a Bluetooth-enabled Windows 7 laptop.
You can also arrange for Pioneer to update your 2012 Pioneer CD or DVD Receiver by calling Pioneer Customer Service toll free at 800-421-1404 during regular business hours (M-F 10AM-7:30PM Eastern Time, except on holidays). If this firmware update is performed by Pioneer, there is a charge of $60.00 (this charge includes return shipping of the updated unit within the U.S.). Charges for removal/reinstallation of the unit and shipment to Pioneer are the customer’s responsibility.
How to Determine if the Firware Update has Already been Installed
CD Receivers:
• With the unit turned off (press and hold the source button until the CD Receiver turns off), press and hold the center of the volume knob to bring up the Settings menu → rotate the volume knob until "BT Version Info" is displayed and then press the center of the volume knob → The firmware version should show HW05-SW01.27.20.
DVD Receivers:
• With the unit turned off (press the home button and select ‘OFF’ from the source icons), press the home button → Press the “System” icon at the bottom of the screen → Select the “Bluetooth Version Info” option → The firmware version should show HW05-SW01.27.20.
If the Bluetooth firmware version shows HW05-SW01.27.20, no further action is necessary.
Questions
If you have any questions, please contact the Pioneer Customer Service Center toll free at 1-800-421-1404, Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on holidays.
Sincerely,
Pioneer Electronics (USA) Inc.

23" Cinema Display not working. Please help!!!!

I recently purchased a dual 2gHz MacPro Tower and a 23" HD cinema display (both factory refurbished by Apple). Everything worked flawlessly. Then...
I was away from my computer for about a week, during which time both the computer and the monitor were powered down the entire time.
Now my CPU boots fine, and I can hear it responding (when I raise and lower the volume, etc.) but the ACD won't fire up at all. The light on the front isn't blinking or anything, and I'm just wondering if there's anything I can do (I've already reset pram, replugged everything in, restarted several times, etc).
I've also done the ULTRA obvious stuff like brightening my display (which does nothing). I don't know how a less-than-a-month factory refurb that's been off for a week could go kaflooey, but any advice is greatly appreciated.

I'm having a similar problem although it may be USB related. It started with my 2 year old 23" display not waking up when it and the computer (3 month old 15" Mac Book Pro) were asleep overnight. The first two nights this happened I'd restart everything and it'd all be fine. The next couple nights I noticed that if I just unplugged the USB cable from the display into the computer, it would all wake up and function just fine. Today (the 4th day or so, and the day I finally have time to research what the problem might be) the display won't start up at all. There is no indicator light (and never has been in these situations) on the ACD. According to my Display menu bar and my system profiler, my computer definitely recognizes that the monitor is attached (although this was not true the first time the ACD acted up). My mouse also acts as thought the ACD is online... I have now adjusted brightness, and unplugged absolutely everything and replugged it all into a different power source. Still no go... Haven't had a chance to buy a new brick, not really sure that'd work for me... any ideas?
If it were the brick- based on what I've seen on the back of my ACD, it doesn't even look like you can disconnect the cord?
and just a side note... in exploring this problem i noticed that you can choose what the power buttom on the ACD actually controls in the Options menu of the Display System Preferences... is this only for older OS's? because my display preferences has absolutely no Options menu in it...
Thanks.

Caller display not worked since June 2014

On 26/06/14 I reported a fault (VOL-**********) that the caller display function had stopped working following a thunderstorm in the area. According to the fault status this fault is showing as being corrected and closed on 02/07/14 when in fact the fault still exists. I tested the line using the BT test socket with a new BT2000 phone and this displayed ‘incoming call’ therefore my internal wiring is not part of the problem. I have also dialled the test code *#234# to check if the caller display service is available and confirmed that it is. I then tested the new BT2000 phone on the neighbour’s telephone line and this showed the caller ID for incoming calls, as did my other telephone as well; therefore none of the telephone handsets are at fault. Three times BT have informed me that the fault has been fixed and yet I still have no caller display. Reading through the forums it would appear that other people have encountered similar issues and that the problem is at the exchange, “An Openreach engineer discovered that the RS232 burst transferring the CLI number up the line was too weak and he then went down to the exchange to investigate. He then discovered that the fault lay in the ADSL device which lies between the analogue exchange equipment and the outgoing line”.
I’m surprised to see that BT are taking so long to trace a fault in their system last raised 5/8/2014 (VOL012-**********) and that they haven’t sent an engineer to the property or to the exchange to check the problem.
My patience is wearing thin over this problem with my Caller Display not working as it started in mid June. I’m also becoming less enthusiastic about BT and find it harder to recommend them to others.
My last message from BT, tells me that it should be back to normal on the 8 August. However, it is still not working. Their message that my phone should be back to normal now and if it isn’t report this to BT, is ridiculous. If an engineer had investigated what was causing the fault and found it, then he would have fixed it. However, either an engineer has not investigated the fault or BT is not competent in fixing their own service faults and makes these statements with crossed fingers?

An engineer called yesterday and told me that he had been asked to test the line for a voice fault not a Caller Display fault. However, his testing revealed there is no line fault, CLI signal is strong and he was happy that the new BT2000 phone (bought after the lightning strike) is working properly. (This phone had also been tested on a neighbour’s phone line where it displayed the callers number). He also found that this same BT2000 phone on my line was not displaying the Caller’s number (CLI), but couldn’t offer any reason why.
I conjectured with him that these tests must bring the problem down to a corrupted CLI signal which does not allow the phone to understand the phone number being sent.
When the lightning struck the phone line back in June, it blew the telephone connection in the back of the Sky Box with a flash and bang (telephone cable now removed from the Sky box). It shorted the Openreach Faceplate (now replaced) so that the phones and broadband stopped working and it caused the phone to light up and react as it does when a call comes through.
Now isn’t it possible that the lightning also travelled along the copper wire to the green cabinet just outside the house and damaged something there which is corrupting the CLI signal, but which does not not show up when the voice line is tested? If not, then there must be a problem further back in the infrastructure, possibly in the Exchange, that is causing a corrupted signal to be sent to my phone?
He told me that another team would have to investigate the Caller Display fault as he was instructed to look into a voice issue and as a field engineer he was not able to investigate any problem that might be in the Exchange. I don’t know whether this Exchange Team would be able to investigate a problem in the Cabinet if nothing is found in the Exchange or can that only be done by a field engineer? He told me to contact BT again as he’d done all that he had been instructed to do and they would have to instigate a fault team to further investigate the problem.
When all this is considered we have the basic problem that BT are unable to provide me with a Privacy and Caller Display Service that I have been paying for, because of a fault in their infrastructure. How much longer is it going to take before they correct the problem that’s been going on since June 2014?

Hibernate mapping editor not working fully

My hibernate mapping editor is not working fully. I can manually enter a new property into the xml and the design pane will update but if I try to add a new property in the design pane it only adds "<property/>" without the attributes specified.
I looked at my workshop log and I did find the following exception:
BEGIN EXCEPTION-
!ENTRY org.eclipse.ui 4 0 2007-03-13 09:08:37.939
!MESSAGE Failed to execute runnable (java.lang.NullPointerException)
!STACK 0
org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException)
     at org.eclipse.swt.SWT.error(SWT.java:3374)
     at org.eclipse.swt.SWT.error(SWT.java:3297)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:126)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3325)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2971)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1914)
     at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1878)
     at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:419)
     at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
     at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:95)
     at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:78)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:92)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:68)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.eclipse.core.launcher.Main.invokeFramework(Main.java:336)
     at org.eclipse.core.launcher.Main.basicRun(Main.java:280)
     at org.eclipse.core.launcher.Main.run(Main.java:977)
     at org.eclipse.core.launcher.Main.eclipse_main(Main.java:952)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.m7.installer.util.NitroxMain$1.run(NitroxMain.java:36)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.NullPointerException
     at com.m7.wide.doceditor.XmlTagCommander$_A.actionPerformed(Unknown Source)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at com.m7.wide.eclipse.jstudio.Plugin$_A.A(Unknown Source)
     at com.m7.wide.eclipse.jstudio.Plugin$4.run(Unknown Source)
     at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:123)
     ... 32 more
---END EXCEPTION---
Any ideas on how to fix this?
Thanks,
Avi.

Yes, there is a known issue using the latest update of 1.4.2 or 1.5.0 vm.
Generally, Workshop should work fine with 1.4.2 or 1.5.0 series. You can find the supported platform info at
http://edocs.bea.com/workshop/docs92/supportedplatforms33.html
FYI:
http://forums.bea.com/bea/thread.jspa?threadID=400001144&tstart=15&mod=1169490304818
http://forums.bea.com/bea/thread.jspa?threadID=400001987&tstart=0&mod=1172533558688

DC not functioning with FSMO roles

hello every body,
I have 0 DC and 01 ADC lets say that DC and ADC. both were replicating AD and working properly. few days ago the motherboard of my DC failed and we replaced with new one. and obviously NIC card was attached with M.Board which also changed. when i boot up
my DC, i see its not functioning as domain controller as i saw in server manager all FSMO roles are with red cross. i assign the ip address which it hold previous i.e 192.168.0.1. but still FSMO roles are disabled. While my only ADC is working properly with
following errors and warning in AD DS roles.
Warning on ADC:
The remote server which is the owner of a FSMO role is not responding. This server has not replicated with the FSMO role owner recently.
Error on ADC:
Log Name: Directory Service
Source: Microsoft-Windows-ActiveDirectory_DomainService
Date: 12/15/2014 11:18:07 AM
Event ID: 1863
Task Category: Replication
Level: Error
Keywords: Classic
User: ANONYMOUS LOGON
Computer: KHI-ADC.jehanpakistan.com
Description:
This is the replication status for the following directory partition on this directory server.
Directory partition:
DC=ForestDnsZones,DC=jehanpakistan,DC=com
This directory server has not received replication information from a number of directory servers within the configured latency interval.
Latency Interval (Hours):
24
Number of directory servers in all sites:
1
Number of directory servers in this site:
1
The latency interval can be modified with the following registry key.
Registry Key:
HKLM\System\CurrentControlSet\Services\NTDS\Parameters\Replicator latency error interval (hours)
To identify the directory servers by name, use the dcdiag.exe tool.
You can also use the support tool repadmin.exe to display the replication latencies of the directory servers. The command is "repadmin /showvector /latency <partition-dn>".
My DC is working properly as a System.
should i have to do something with my NIC or AD DS roles or i have to transfer FSMOs to ADC. or sieze fsmo roles of DC on ADC.
please help.

Is your DC (role holder) a DNS Server as well? I assume it is, if so open the server role properties and ensure the DNS server role shows the IP in the interface if it does not you may need to uninstall/ re-install the DNS server role (assuming it is a 2008
R2 DC or above... Also did you look at your NIC settings? Did you re-establish the exact same NIC configuration as before?
When the motherboard gets replaced and new NICS are introduced I normally look at the NIC settings and DNS Server roles... That is the Microsoft side of things. On the LAN/ WAN side of things if your network team has port security enabled on the switches
the port may be locked down due to the new MAC Address.

Display not functioning fully.

Similar Messages

Maybe you are looking for