Display of 2 rows of data for 2 different date range selection

Hi Folks,
I have a requirement as follows,
User has an option of selecting 2 Date Ranges
From and To Date and again From and To Date
The result should display 2 different rows of data with From and To Date range selection.
Eg:
12/09/20008 to 03/09/2009           10 20 30 40
23/10/2009 to 18/12/2010           40 20 10 30
Difference                                   30 0 20 10
% Change                                   x y z   q
Thanks for your input.
Regards,
KJ

You will need to use union report, and you would have fours union's in this report.
Union - 1: Data from 1st Date Range
Union - 2: Data from 2nd Date Range
Union - 3: Variance Calculation
Union - 4: Percentage Variance Calculation.
If the date's are coming from the same field, use cast function to use the same column twice in your prompts. Apply filters on each union as needed.
Thanks.

Similar Messages

Powerpivot for sharepoint error: Unable to refresh data for a data connection in the workbook

Hello,
I have three errors when i try to use a simple powerpivot workbook published in sharepoint: (nothing on google has help me..)
1-Unable to refresh data for a data connection in the workbook.
Try again or contact your system administrator. The following connections failed to refresh:
PowerPivot Data
2-The embedded PowerPivot data in the workbook cannot be loaded due to a version mismatch
3-01/21/2012 17:26:47.08 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel
Calculation Services    bccc Medium Session.HandleTrimmedWorkbookReloading: userOperation ApplySlicerSelectionOperation requires BaseWorkbook: "http://crm2011:2020/Marketing%20Reports/test2_excel32bits.xlsx"
[0x409] [Saturday, 21 January 2012 09:40:18] [BaseWB ID: 2] to be untrimmed if it is currently trimmed. The workbook is currently NOT trimmed. fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.08 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    f1va Medium CWorkbookWrapper::CWorkbookWrapper: Created with ID=4 fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.09 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    eq3r Medium ConnectionRequest.ConnectionRequest: New connection request. SessionId=1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
WorkbookVersion=ConnectionInfo.WorkbookVersion: Uri=http://crm2011:2020/Marketing Reports/test2_excel32bits.xlsx, Version=Saturday, 21 January 2012 09:40:18 fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.12 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    aysl Medium Succeeded to initialize a chart. fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.12 w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    8xk9 Medium ExternalSource.ExecuteOperation: We exhausted all available connection information. Exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException: Exception of type
'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException' was thrown.     at Microsoft.Office.Excel.Server.CalculationServer.ConnectionInfoManager.GetConnectionInfo(Request request, String externalSourceName, Int32
externalSourceIndex, Boolean& shouldReportFailure)     at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.ExecuteOperation(Request request, ExternalSourceStateInfo externalSourceStateInfo, ExternalSourceStateInfo prevExternalSourceStateInfo,
Int32 index, ConnectionInfoManager connectionInfoManager, ExternalDataScenario scenario, DataOperation dataOpe... fb614a65-e398-4b97-a98d-fb7b23eab39f
01/21/2012 17:26:47.12* w3wp.exe (0x1950)                       0x0AD0 Excel Services Application    Excel Calculation
Services    8xk9 Medium ...ration, Boolean verifyPreOperationConnection), Data Connection Name: PowerPivot Data, SessionId: 1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
UserId: 0#.w|contoso\manager fb614a65-e398-4b97-a98d-fb7b23eab39f
My server and client olap versions are the same: MSOLAP.5, i used sql server 2008 R2 SP1 and sharepoint 2010 SP1 and reboot or iisreset have no effect
Thanks in advance for your help

Hello Challen Fu
I would be so grateful if you could please help me out
I have been trying to find a solution to the same error message
In my case, the power pivot reports were working before on a regular team site , but then two things changed:
a) I created a toplevel site using the BI Center template. Now I am using a Business Intelligence template , created a power pivot gallery library and uploaded a few powerpivot reports
b) On the  backend, the database instance was upgrated to SQL Server 2012
     Front end Server VDSP01 remains SQL Server 2008 R 2 where Sharepoint 2010 was installed as a FARM
Now, the reports will display in sharepoing however they will not refresh. the error message i get is the same.
Scenario recap:
a- Server VDSP01 uses SQL Server 2008 R 2 where Sharepoint 2010 was installed as a FARM
b- On the back end, the database instance name was replaced with SQL 2012 Server:
         from SQL Server 2008 R 2 (instance DBDEV-COTS\COTS)
           to     SQL Server 2012 ( instance VTSQL01\COTS)
c-  I was told that:
     From VDSP01, they ran
CliConfg.exe to create SQL Server Alias :
       where    BEFORE: vdsharepoint --> DBDEV-COTS\COTS
            and AFTER    : vdsharepoint --> VTSQL01\COTS
I appreciate in advance any help you can provide<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
<v:stroke joinstyle="miter">
  <v:formulas>  <v:f eqn="if lineDrawn pixelLineWidth 0">
  <v:f eqn="sum @0 1 0">
  <v:f eqn="sum 0 0 @1">
  <v:f eqn="prod @2 1 2">
  <v:f eqn="prod @3 21600 pixelWidth">
  <v:f eqn="prod @3 21600 pixelHeight">
  <v:f eqn="sum @0 0 1">
  <v:f eqn="prod @6 1 2">
  <v:f eqn="prod @7 21600 pixelWidth">
  <v:f eqn="sum @8 21600 0">
  <v:f eqn="prod @7 21600 pixelHeight">
<v:f eqn="sum @10 21600 0">
</v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
<v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
<o:lock aspectratio="t" v:ext="edit">
</o:lock></v:path></v:stroke></v:shapetype> <v:shape alt="" id="Picture_x0020_2" o:spid="_x0000_i1025" style="width:630pt;height:475.5pt;" type="#_x0000_t75">
<v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\wlarange\AppData\Local\Temp\msohtmlclip1\01\clip_image001.jpg">
</v:imagedata></v:shape>
wanda larangeira

How to compute data from different data sources?

All we are doing with data is from one single datasoure, which could be from oracle or sql server or a excel table, the issue is how could we combine these data from different data source with SQL?
Example: i need some data from Sale Table in Excel and some data from Custumer Table in oracle, how could SQL complete this mission? Solutions are welcomed and appreciated.
消息编辑者为：Datathinker from Raqsoft

Hi,
This forum is dedicated to SQL Developer Data Modeler product.
You might search for solution in general questions forum.

Can we send the data into different data target from single datasource how

Hai
can we send the data into different data target from single datasource how ?

Hi,
Create the transformation for each target and connect through DTP if you are in BI 7.0
If it is BW 3.5 create transfer rules and load it Info source and then different update rules for different targets then load it using IP.
If you are speaking about loading data from R3 data source to multiple data sources in BI
Then follow the below step.
1)create init IP's and run the IP's with different selection to different DSO(With same selection it is not possible).
2)Then you will have different delta queues for the same data source in RSA7
3)Your delta loads will run fine to different data sources from same DS in R3.
Hope this helps
Regards,
Venkatesh

Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?

Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?

List and table controls -> listbox..is that what you are thinking of?
The listbox presents the user with a list of options, and you can set it to only accept one selection at a time...Adding new data to the list can not be done directly by the user but if you make e.g. a text control and a button you can programatically insert new objects described in the text box when the button is pressed...(see example).
If you need more than one column you have the multicolumn listbox. If you want the users to write new entries directly yu can use a table and read selected cells using it's selection start property to read what cell has been selected.
MTO
Attachments:
Listbox_example.vi ‏34 KB

There is no source data for this data record, Message FZ205

Hi Experts,
I am facing a problem with the DME File download. This problem happened all of sudden in our production system since last month and it was never before. Our system landscape has also not been changed but as per our basis consultant he has added two-three more new application server to the Production client. Even we do not have this problem in our testing clients.
Please note that we have been using the output medium '1' from the day one and thus the system has been generating the DME in 'File System' which we download on the desktop and upload the same to the bank online. After running the payment run when we trying to download the DME File, the system gives the error "There is no source data for this data record, Message FZ205".
I tried to fix this issue through many ways but not able to. So can you please let me know the reason of this error and solution to fix this.
With best regards,
BABA

Hi Shailesh,
Please share how you solved this problem.
Many Thanks,
Lakshmi

Baseline Date for Due Date Calculation required for S/L indicators

Hello,
Iu2019m facing the following problem
Iu2019m trying to insert an invoice (using a customer master record) but the system blocks me because the field ZFBDT (Baseline Date for Due Date Calculation) is a Required entry.
The strange thing is that if I use a S/L indicators the field is mandatory, if not the date may be defaulted.
I checked in OB41 but there are non differences between Special PK and normal PK.
Any ideas?
Thanks in advance
Alberto

Dear Alberto,
the field "Due On (BSEG-ZFBDT)" cannot be controlled with field status.
It is controlled by field attribute of screen painter (Tcd: SE51). If
you look at element attribute for "Due On" field, a flag for required
entry is activated. In this case, field status has no control over
the field.
As of release 3.1G, field BSEG-ZFBDT is hardcoded in most FI screens
to be mandatory and cannot be influenced by any field status
changes. This situation is only valid when posting with special G/L
indicator (ie PK 29/39).
SAP development team has determined that this is a critical field. The
reason behind this is that this special GL screen and the data entered
here are very important to many other programs. This data affects
liabilities and receivables where due date is necessary almost
everytime. Thus, we changed this field in this screen in order to
prevent problems in many other areas. The reason is explained further
in note 95079.
I hope this helps You.
mauri

How to set different pointsize (Font Size) for different text range in the single textframe.

I have a one textframe in which i want to set three different pointsize(font size) for three different text ranges. I have set different tag name for different text ranges . So How can I set different pointsize in the single texmframe.
Please reply me if anyone is aware of it.
Thanks,

Jack,
Extending Martti's post, you can create an XSLT that will add an element around the ASD2.1 part when you import the XML file into FrameMaker. Then FrameMaker's EDD can format this added element with a font different from the one used in the content element.
Van

How to get current date for posting date

hi,
how to get current date for posting date ? any sample code ?
Thanks

Hi......
Use
Select getdate()
for current date.......
Regards,
Rahul

DOCUMENT DATE FOR BACK DATA TO BE UPLOADED

hello experts,
I have a purchase cube with TD from last year.
I have PO NUMBER as a characteristic AND 2LIS_02_SCL as datasource for Purchase.
now i want the date on which PO is created and there is a DOCUMENT DATE available in the datasource.
now i have added 0Doc_date as a characterstic to the cube but the date is coming in the report instead # is appearing in Doc date column.
when i am checking the data in PSA the document date value is available correctly .
Now please help to load the document data for the back data.
how to do this so that the Transaction data should not get affected and i get the Document date for the previous PO numbers also.
plz explain in details.
will be very thankful

Hi,
Delete one Request of that data source from Cube
and then Reconstruct it.
check whether the data for document date is coming or not
if it is coming then delete all the request and reconstruct.
it will reflect after that.
Edited by: obaid shaikh on Mar 17, 2011 1:47 PM

Doing the same task for different data.. Do I need Queues? How to use them if yes?

Hello all,
I have created a VI which is getting data from some FTP server and then after comparing with the HDD specified folder copy the missing data from the FTP ... Description is also in the VI. There are few things I need to ask.
1) The email sending VI gives error 1172..What could be the reason .. is it firewall.. or is there any mistake in the code?
2) As you people are experts so I really like any suggestion to improve the VI..
3) The most important .. Currently this VI can only perform the whole task for one FTP folder. Actually my task is I need to check for 4 different FTP folder on different servers..its not 4 different folder in one FTP .. its 4 different FTP.Now my question is how I can do this: First it compare and copy from FTP1.Then FTP2... and so on.. How can I change the data for the cluster for different FTPs? Do I need to use queues? If yes how because I don't have any experience with queues.
I will really appreciate is someone can either provide me the relevant example or can give me some idea.
The main VI is the 'TASK START'.VI please find the attached files.
Thanks
Regards,
Naqqash
Naqqash
Attachments:
Project.zip ‏151 KB

Hi Peter,
Thank you very much for your reply. I have understood your idea but there are few problems.
Please see the attached "Final test.vi".. actually my top level vi should be like this.. due to this reason I need to develop the cluster like one with name "Settings" as shown in Enum FTP events.vi.. In this cluster all the data types are not constants (but can be set as constants) and further all of them are not of same type so whenever I try to create as you created I have got error, wire broken..so what do you think i should do.. In this cluster there are different types of data .. string, path, numeric, array and a cluster with name file properties also... can't figure out what to do..I know things are little scattered and wiered but due to lack of experience, I guess, I am now a little bit confused for this matter. I
hope guys here in the forum will help me as you guys always did.
Naqqash
Attachments:
Final test.vi ‏11 KB
Enum FTP Events.vi ‏14 KB

How to use decode to calculate sum for different date range

I'm stuck with decode() function:
I have a table like this:
(project_id, approve_date, value, builder_code)
I want to write a SQL query to get sum of values for different month of the approve_date, and group by builder_code)
The result is like this:
builder_code Sum(value)_Sep-03 Sum(value)_Oct-03 Sum(value)_Nov03
1001 1,299 1,322 990
1002 3,332 1,222 333
I tried to use decode for this question but could not get the answer.
Thanks a lot

I don't think you need a DECODE() here. I'd do something like this-
create table builder (
    project_id number,
    approve_date date,
    value        number,
    builder_code number
insert into builder values( 1, to_date('09-01-2003', 'MM-DD-YYYY'), 100, 990 )
insert into builder values( 2, to_date('09-03-2003', 'MM-DD-YYYY'), 150, 990 )
insert into builder values( 3, to_date('09-05-2003', 'MM-DD-YYYY'), 250, 990 )
insert into builder values( 3, to_date('09-05-2003', 'MM-DD-YYYY'), 250, 333)
SELECT sept.builder_code, sept.sept_sum, oct.oct_sum
FROM (SELECT builder_code, sum(value) sept_sum
        FROM builder
       WHERE approve_date >= to_date('09-01-2003','MM-DD-YYYY')
         AND approve_date < to_date('10-01-2003','MM-DD-YYYY')
       GROUP BY builder_code) sept,
     (SELECT builder_code, sum(value) oct_sum
        FROM builder
       WHERE approve_date >= to_date('10-01-2003','MM-DD-YYYY')
         AND approve_date < to_date('11-01-2003','MM-DD-YYYY')
       GROUP BY builder_code) oct
WHERE oct.builder_code(+) = sept.builder_code
BUILDER_CODE   SEPT_SUM    OCT_SUM
         333        250
         990        500Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com/askDDBC

Is it possible to define multiple Initial Extract Date' for Different modules ? INITIAL_EXTRACT_DATE

HI
We are configuring BI Apps 11.1.1.7.1 For HRMS and Financials. HRMS data should extract from '2010-01-01' and Financials Data should extract from '2012-01-01'
is it possible?
Source system: EBS 12.1.3
OBIEE: 11.1.1.7
BI APPS: 11.1.1.7.1
ODI: 11.1.1.7.0
OS: Windows server 2008 R2
by default 'Configure Initial Extract Date' to set the value of INITIAL_EXTRACT_DATE to '2005-01-01'.
http://docs.oracle.com/cd/E28271_01/fusionapps.1111/e16814/overview.htm
Regards
Sher ullah

HI Srini VEERAVALLI
ITs confusing point. Cause on Configuration manager i am able to see 'Initial Extract Date' for HRMS also and in Financials also.
I created two separate Implementation projects respectively HRMS and Financials. so whether 'Initial Extract Date' can be setted Different for both.
Regards
Sher

Scheduling the requirement quantities on different dates for different vend

Dear Gurus,
We have requirement of generating the shcedule line on different dates
in case multi supplier. The part is supplied by 3 different supplier when executing MRP the system generated schedule line on same date for each supplier,
however the business requirement is not to receive all material on same
date. But to receive all the requirements on the 3 consecutive days say for 3 different vendors. We have maintained Quota Arrangement for splitting the requirements order quantity.
Pls suggest the configuration / Material master changes we need to make for the same.
Regards,
Pradeep Santara

Hi
If you want different dely dates for each supplier, you maintain different planned dely time in supplier specific inforecord for that particular material.
Hope this will solve your problem.
Reward if so
thanks & regards
sri.

Different Asset value dates for different depreciation areas

Hi All
I have a requirement for different capitalization dates in different depreciation areas for some LATAM countries .How can this be achieved?

Hi
Hope you can achive this requirement by entering Depreciation calculation start date in depreciation area tab of asset master against each depreciation area
Depreciation calculation start date
'As a general rule, the system determines the depreciation start date from the asset value date of the first acquisition posting. However, you can also manually enter a calendar date in the asset master record for the start of depreciation. In that case, the system ignores the asset value date of the acquisition posting.'
Please check different scenarios in development system and then do it
Regards
Praveen PC

Reuse Dimdate across different database for different data models

Hi,
I am designing a new data model for a data mart. I need to add dimdate dimension in this data model. I noticed that dimdate already exists in another database and being used by another
data model. Is it possible to re-use the existing dimdate table for my new data model? If so, what about the foreign key constraints? Normally we link the date columns from fact table to the dimdate keys. How would we achieve that in case we are using the
same table across different databases?
Any opinion on this will be highly appreciated.
Thanks in Advance.
Cheers!!

You can create a copy of dimdate table to your new data warehouse.
If both data marts were in a single data warehouse, then you don't required to copy. but as these are in two different databases then you just copy that.
regarding FK relationship. you can connect any fact table to you date dimension. even if you want to use more than one instance of your date dimension, it would be simply adding multiple FK columns in your fact table (role playing dimension).
For date dimension be sure that your date dimension covers most of the attributes required. here is an example of date dimension:
http://www.rad.pasfu.com/index.php?/archives/156-Script-to-Generate-and-Populate-Date-Dimension-Version-2-Adding-Multiple-Financial-Years.html
Regards,
Reza
SQL Server MVP
Blog:
http://rad.pasfu.com Twitter:
LinkedIn:
SQL Server Integration Services 2012 Tutorial Videos:
http://www.radacad.com/CoursePlan.aspx?course=1

Display of 2 rows of data for 2 different date range selection

Similar Messages

Maybe you are looking for