Different Asset value dates for different depreciation areas

Hi All
I have a requirement for different capitalization dates in different depreciation areas for some LATAM countries .How can this be achieved?

Hi
Hope you can achive this requirement by entering Depreciation calculation start date in depreciation area tab of asset master against each depreciation area
Depreciation calculation start date
'As a general rule, the system determines the depreciation start date from the asset value date of the first acquisition posting. However, you can also manually enter a calendar date in the asset master record for the start of depreciation. In that case, the system ignores the asset value date of the acquisition posting.'
Please check different scenarios in development system and then do it
Regards
Praveen PC

Similar Messages

Different Asset Value Dates for each Asset

Hi,
A very interesting and unique requirement.
We are attaching multiple assets in the settlement rule of wbs elements and run CJ88, but as per standard SAP, all assets under each WBS Element are capitalized on the same Asset Value Date.
My client wants to capitalize assets at different asset value dates for each of these assets without needing to run CJ88 multiple times.In CJ88, however, we have only one asset Vale date option.
Is this possible to have different asset value dates asset wise when we run CJ88 ? I did not find any option to define an asset value date in CJIC either.In Settlement rule neither.
Thanks for any help.
Regards,
Manis

Try and explore the option of using Asset Value date on the sender WBS, you can find this under settlement parameters.
This option depends on your project (WBS) strcture and the number of assets being capitalised on back on one WBS element.
Refer note OSS 98496 for more information
Regards
Sreenivas

Asset values not coming in depreciation area

Hi Experts,
Following the management requirement we have created a new depreciation area 50 with posting indicator "0".
We found that asset posting from CJ88 (AUC to Final settlement) is not getting updated in depreciation area 50.
Please help me this. Necessary details are mentioned below:-
1. Depreciation area 50 is activated for main asset class but not for CWIP.
2. For depreciation area 50, value maintenance is set as Only Positive values or zero allowed.(Screen shot attached)
3. Transaction type 336 is not restricted to any depreciation area.(Screen shot attached)
Am attaching relevant screen shot.
Thanks in advance

HI Mukhthar,
Thanks for the prompt reply.
In some cases system is updating values in depreciation area 50 even CWIP is not activated but in maximum cases system is not updating the values.
I have carried out the changes in quality by activating depreciation area 50 for CWIP and perform a test case and it works but i want to know the root cause of this issue that why system is behaving like this and how it updates value in some cases.
Please suggest

Portal shows different amount of data for different users

hi
please give me why this is happening...
when the user logs into the GUI he can see the whole screen containing 10 inputfields but in the portal one user is able to see the whole of the page while the ohter is able to see only the first 7 input screen.....
why is this happening...
is it related to some undocumented check over the content or it is a problem of how the system was defined over portal landscape in system administation....
reply asap. points assured for helpful answer

Hii .....am a student and am interested in learning SAP BASIS . Can any body forward me the documents for SAP BASIS.
Thanks

Asset Value Date in Settlement

Hello!
We would like to settle investment measure to a completed asset, so the settlement rules have been updated with the completed asset, status of the order has been changed to TECO (technically complete).
When we settled the order (not via u201Cko88u201D but via automated program which uses our client) it turned that out asset value date is different than posting date, so the system takes the date when investment measureu2019s status has been changed to TECO instead of posting date, as asset value date.
Would anybody know where and how to change config, so asset value date is the same as the posting date?
Thanks in advance for any hints.
Regards,

Hi,
Are you looking for below mentioned settings...
Financial Accounting (New)->Asset Accounting->Transactions->Specify How Default Asset Value Date is Determined
Best Regards,
Madhu

Asset Value Date - Wrong posting

Dear All,
Company code is on live, Assets legacy data taken as on 31st-March-09.
Later we find that some of the assets [new purchases, in previous fiscal year (2008)] was not posted.
For that recently we posted that transactions F-90 using posting date is current date and document date is Actual acquisition date.
Due to document date in previous fiscal year system taten posting date as asset value date.   So, depreciation posting missing for previous year.
I need your help. How can I rectify this???
Other than reversing the existing posting, what is the scenario????????
Thanx
Regards
partha

Hi,
In order to post ,post capitalization please closed the previous asset accounting year.In ABNAN T.Code screen please update the original val date field with the date of the previous year from where you need to start calculating the dep. Doc date and posting date should be of the current FY.Also check T.Code Ao90 for updating the field Revenue from post capitalization with proper GL Account.
If your statutory audit for 2008-09 is not yet completed then you can think about T.Code AS91.While using T.Code ABNAN the following line items are generated.
Asset        dr
Acc Dep         cr
Rev form post capitalization cr
The system will only calculate dep of previous year.For the current year dep which are yet to be posted will be posted in the next schedule dep posting run.
Thanks
Monoj

F-90. asset value date field is not displayed

Dear all
In asset acquisition posting through F-90. asset value date field is not displayed at the time of entering acquisition. It is in supress mode. so system is capturing the capitalisation date. But we can see this capitalisation date as asset value date in fb03 display. Now i want to display this field as optional field while creating the entry and also i want to change the field in display mode to change mode. kindly tell me the menu path to access the settings.
Thanks With Regards
RSS.

Hi,
You can enter a diff asset value date for your acq posting, only thru transaction ABSO using TType 100.
This will resolve your issue.
Thanks,
Srinu

Different Aquisition Value (APC) for group and local depreciation area?

Hello,
Is it possible to have different APC/acquisition value in your group and local depreciation area? We want to book the net book value as APC for local depreciation area while gross APC and accumulated depreciation are recorded in group depreciation area.
Group Depreciation Area
APC- 100
Accum Dep- 20
Local Depreciation Area
APC-80
I'd highly appreciate if you can give inputs.

Hi,
You did exactly whats required to acheive your requirement.
There is no more further implications by removing the tick for a while and reverting after go live.
While doing AS91, if you enter the APC value for 01 area, then that value will be automatically populated to the other dependent areas of 01 area. ( In case, if your other areas are in diff currency also, system will converts the 01 area value in to other area's curr by taking the exch rate).
Here you can still change the APC values for the all other areas. (The other areas should have been unticked for Identical APC value check box in OABC).
So while creating AS91, in tkaover values tab, enter APC value 80 in your 01 area and manually change the value in your group area. (REmove 80 and enter 100).
For accum dep, in takeover values tab, enter accum dep 20 in group area only. (like OABC, in OABD also the other areas should be unticked for the identical value check box).
This will resolve your issue.
Thanks,
Srinu

How to upload two different asset values for Book & Tax Depre in FA

Hello all
kindly let me know how to resolve a situation where we have different methods of calculating Depreciation. For Example SLM for Book Depreciation and Diminishing method for Tax Depreciation.
To calculate depreciation we use straight line method for book depreciation and diminishing value method for Tax depreciation. In this case, we have 2 different asset values to calculate book and tax depreciation.
Since SAP allows to upload only one asset value (Gross book value), I get correct book depreciation value but incorrect value for tax depreciation as the tax depreciation is calculated based on gross book value instead of net book value (gross book value less accumulated depreciation value).
For Eg
FOR THE FIRST YEAR
BOOK DEPRECIATION:
Asset Value = 1000
Depreciation Method : SLM
Depreciation rate is 10%
Depreciation Amount = 100
TAX DEPRECIATION:
Asset Value = 1000
Depreciation Method : DIMINISHING METHOD
Depreciation rate is 15%
Depreciation Amount = 150
FOR THE SECOND YEAR
BOOK DEPRECIATION:
Asset Value = 1000
Depreciation Method : SLM
Depreciation rate is 10%
Depreciation Amount = 100
TAX DEPRECIATION:
Asset Value = 850
Depreciation Method : DIMINISHING METHOD
Depreciation rate is 15%
Depreciation Amount = 127.5
KINDLY LET ME KNOW HOW TO UPLOAD THE PAST DATA WITH TWO DIFFERENT ASSET VALUES (IE 1000 & 850) FOR THE ABOVE.
Regards
Sushil Yadav

Hi K,
I'm having the same problem...did you find a solution yet?
Greets,
Martin.

Legacy data transfer for new depreciation area for already existing assets

Hi all,
I am doing legacy data transfer for New deprecaition area for already existing assets through AS92.
I like to give Ordinay depreciation posted amount for the current FY for these assets in AS92, but i find this field is not editable inAS92.
Please guide me to upload the Posted deprecaiton amount (for current FY) for these assets. I have assets both which are acquired in Last FY year and also this FY year.
Regards,
Srinivas

HI,
I have to migrate Posted dpereciation for new depreciation for nearly 3000 assets, In transaction 147, where i need give Acquituion value aslo, please note these are not new assets, these are prior year assets wiht opeing balances. If we use 147 system will take it is current acquition.
Please note my transter date is 28.02.2010, I have already run AFAB for this company cdoe Feb 2010 for other depreciation areas.
Now i am trying to update Opening APC Cost and Opening Accumulated deprecation for these assets and also posted depreciation for this FY.
Where in AS92, i am able to update Opeing APC Cost and Opeing Acc Dep succsfully for new dep area for already existingassets, bu Posted deprecation field is not editable.
Please guide me how to update posted deprecation for new deprecaition area in AS92 or some other way for already existing assets.
REgards,
Srinivas

New Depreciation Area in Asset Master Data, for assets under construction.

Hi,
The issue is relating to New Depreciation area. We have created new Depreciation area as 80=IFRS. We had followed three steps
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :-
3.1 u2013 Indicator: Leave values initial = ticked. Set this indicator if you want to open the newly created depreciation area without any values i.e. blank.
In this we have find that the old assets value has been copied. But when we are doing internal order settlement through KO88 i.e. from pre-cap to AUC we are not finding new Depreciation area 80=IFRS in AUC. We had checked in AW01N.
Letu2019s assume that creating a new deprecation area is normally not required since these assets are not depreciated. But During the final settlement, the new depreciation area should also automatically supplied with values from the reference depreciation area from the AUC(assets under construction) in the completed assets. But we doesnu2019t find any values of in Dep Key = 80 IFRS for final assets.
In Assets Class of AUC we had used Investmnet Measure as Status of AUC.
Kindly provide solution for the same.
Nikhil

Check Transfer Variant 5 (under Transactions->Intercompany Asset Transfers->Automatic Intercompany Asset Transfers->Define Transfer Variants):
5     Investment measure settlement
Your Transfer Method is most likely 1 now (without transfer to dependant areas), change it to:
4     Gross method with transfer of values to dependent areas
This should help.

What is setting for the depreciation calculate on the basis of assets value date

Hi ,
My client requirement to calculate the assets depreciation on the basis of assets value date,
every assets transaction will have take base assets value date
Acquision 1 Assets value date 1.4.2014
transfer Assets value date 15.3.2014
Wbs settlement Assets value date 20 .3.2014
second acquisition Assets value date 28.03.2014
if anybody know about the setting ,Please provide me important setting ,

Any setting related to assets posting variant ? to calculate if anybody know the setting please inform.

FA-retirement-Asset value date and posting date are not in same fisc year

Hello,
I would like to post retirement in the new fiscal year but with asset value date in the previous year so that NBV is calculated correctly. It is not possible neither in ABAON nor in ABAVN with any transaction type.
I always get message 'Asset value date and posting date are not in same fiscal year'.
Is there any way how to handle this?
Thank you,
Jan

Hi,
I have tried this but the settings of our Depr keys works in the way. That if you use asset value date in the new month it will calculate depreciation for the whole month.
This means if I retire with asset value date 31.12.2008 - NBV will be calculated as at 31.12.2008.
If I retire with asset value date 1.1.2008 - NBV will be calculated as at 31.1.2009.
Thank you anyway!

Asset value date and posting date are not in same fiscal year

Hi,
Our business user has created an asset under an incorrect asset class, which he is trying to transfer to a new asset whcih was created under correct asset class. However system is restricting user with the error message "Asset value date and posting date are not in same fiscal year". Can you please advise me how we can proceed further with this error.
Regards,
Asam.

Hi,
To transfer one asset to another asset within a company code can be done through ABUMN only.
While doing this transfer you have enter the document date, posting date, and value date for the transaction, but all these dates should be in same fiscal year only.
In your case you must have been entered the dates for asset value date and posting date , and these two dates are in diff financial years.
Please make sure that both the dates are in same FY.
Hope this will fix your issue.
Thanks,
Srinu

Write up an asset for a depreciation area

Hi All,
We have 2 Depreciation areas 01 for local, 02 for IAS.
I try to write up as asset with t-code ABZU, but it only takes effect for area 01.
My problem is how to write up an asset which takes effect for area 02 only?
Thanks.
Claude

Hi - First determine the transaction type that you are using in ABZU. Eg you use transaction type 700.
Go to tcoe OAXE ( limit transactions per deprecation area) and select the area 02 for display for selection. You can select the always post option if this transaction type should always post for this depreciation area.
Thanks,
Zaid Azam

Different Asset value dates for different depreciation areas

Similar Messages

Maybe you are looking for