Display of PIR

Hi Gurus,
Can i able to see all PIRs which i have created for all material in a plant for a month. Now i can see the whole PIR for only one material but could not see for all materials.
Thanks and regards
ACP

Hello ACP,
Use Table PBIM,
it will show Requirment Pointers.
NOte the requirment pointers of the material you want to see,
then goto Table PBHI give requirment pointer from and to
it will show all PIR of all material you want to see
Hope this will help
REvert me back in case of any clarification
REgards
AM

Similar Messages

MD73 : Display / Change PIR / SO

Hi,
We are using SAP 4.7C version of SAP.
when we check the MD73 total req plainning with Assignment option 3:
1. when we go with selection of single material: it shows assignment of Sales order to PIR. we can display / change PIR or sales order from MD73 itself.
2.1. when we go with req plan number m for multiple material: it shows assignment of Sales order to PIR but we can not display / change PIR or sales order from MD73.
we are getting message:
Selected function cannot be used for the element
Message no. 6P523
please help.

Hi,
You will be able to edit the PIR but not the sales order, Since sales order are differnt functions on this they are not allwoing to edit us.
Kindly check and confirm.
Reg
dsk

Need Help with Function Module or BAPI for Stock Requirements & PIRs

Hello,
         I am working on making changes to a Report which should be displaying the PIR (Planned Independant Requirements) Quantities as well as Stock Requirements for SOs & STOs for below Type of Materials for the Given Date.
1. Planning Materials
2. Planned SKUs (that is Materials which do not have a Planning Material attached to them).
        In the Current Logic, we are using an FM REQUIREMENTS_ALLOCATION which fetches the Requirements only for the Planning Materials. It does not work for Planned SKUs.
So, is there any Function Module / BAPI which serves this Purpose for both types of Materisls?
   Also, I've managed to Find out two Function Modules which I thought might be useful but still need confirmation regarding the same.
MD_STOCK_REQUIREMENTS_LIST_API and
BAPI_MATERIAL_MRP_LIST
        Please suggest any other FM if available for this Requirement.
Thanks and Regards,
Venkat Phani Prasad Konduri

Basically, here is what my scenario is. I have two Types of Materials which have a Planning Material attached to it. and the Other Category is that it doesn't have a Planning Material attached to it. So, we call it a Planned SKU. That is a Material planned at the SKU level.
          Now, the Issue is , the Function Module REQUIREMENTS_ALLOCATION doesn't work for the Plannd SKUs but it only works for the Planning Material. Now, based on this Function Module, we are populating the Data for the Planning Materials of Material Type ZPLN. Similarly, is there any we can make this FM work for a Material which is planning at its own Level.
          Please help me in this Regard.
Thanks and Regards,
Venkat Phani Prasad Konduri

Issue while selecting the LOCL printer for printing the form

Hi all,
I have created the PO form and it is working fine.
I am facing one strange issue.
I am displaying the PIR text and item text in the form.
When i do the print preview the PIR text and Item text is displayed but when i create the spool for the same PO by
giving the printer as LOCL these text is not displayed.
I am not getting why it is coming when i do the print preview and why it is not coming while creating the spool.
Kindly help.

Hi,
You did not specified the form Type whether it is a smart form or Adobe form.
If it is the Adobe form LOCL is not supported if the printer specified to LOCL is not supporting the PDF forms.
Better use LP01 or any other Printer which support the PDF forms.
Thanks.
UmaS.

PIR & CIR is not getting displayed in APO product master

Hi guys,
I have created PIR and CIR in R/3 ,but it is not getting displayed in APO . Please guide me to resolving this what are the settings i have to check in the SAP system.
Thanks
S.Murali

I am Basis consultant.
Regarding RFC, logical system assinement, are the things are configured.
But still it is not active the integration between R/3 & APO server.
(Behalf of Murali )

Itemization for Material from PIR- Display all condition types

Hi,
I have 4 condition types in Purchase info record (PIR), when I do CK11n-Material Cost estimate for this material, in the Cost Component view ->Cost of Goods manufactured->Itemization for Material - I only see one line with total of the 4 condition types in the PIR.
But I would like to see all the 4 lines (Condition Types from PIR) in the Itemization for material. Can I achieve this with any configuration settings?
I would appreciate any response on this.
Thanks
Sree

I think you can do this if you map the purchasing condition types to origin groups. Try doing the following:
1. Use t-code OKZ1 to create the needed origin groups (one for each pricing condition type).
2. Use t-code OKK4 to map the pricing condition types to the origin group. To do this, select the valuation variant you are using and click on the delivery cost button.
3. Also in the valuation variant, change your sub-strategy sequence setting for material valuation to A (Quote price via condition table).
4. In t-code OKTZ you will probably need to assign these origin groups to one or more of your cost component.
Give this a try and see if it works for you.
Thanks,

Pir sensor with encoders and decoders using rf to 8051 and display on lcd

looking to do a project with the follwing heading is there anyonw with ideas

Hi @Satorijolene ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that when you connect an external monitor via HDMI the screen blinks rapidly. Here is a link to Display Quality Issues to assist you in overcoming this difficulty.
This may also help Connecting a Monitor, Projector or TV (Windows 7)
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Planned Independent Requirement Not getting displayed in MD04

Hi,
I am assigning material to nwa and doing advance procurement by using procurement type PIR. Reservation is getting created after release of activity but the same is not getting displayed in MD04.
The items of the reservation are getting displayed in MB23.
what could be the reason for this?
Regards,
B P Singh

Hi,
Planned Independent requirements (PI) are normally configured for consumption by 'Dependent' requirements. Hence the PIR would have been replaced by the reservation from 'dependent' requirement. You can test and verify the same in development system.
Regards
Murali

Error in SE16n - PIR exsist only in EINE table & does not exist in EINA tab

Hello All,
This is regarding error in Pucrahsing Info Record in which PIR only exist in EINE table & not in EINA table. This is not normal behavior of SAP standard.
In this issue we are able to see P. Info Record (5300083719) details in EINE table only.
But the same PIR does not exist in EINA table .
Also we can not see this in display mode(ME13) & system does not allow us to change PIR. System gives the error message that PIR does not exist.
This is something strange. Can you pls. reply on this.
Thanks in advance.
Mahesh
9869633910

Hello,
The PIR No is availabe in EINE (pur org data) and the same PIR is not availabe in EINA table( General data ).
This is Program error. bcz some times system will not get the correct PIR no while creating the PO, in that time system will create new PIR , that no is from buffer table..
And you cannot track that buffer table....... If you want to check the on that day,, how many PO's were created for that same combination of material and vendor.
Regards
Mahesh Naik.

How PIR's are consumed by the customer requirements even though the sales orders are blocked?

Dear experts,
I am using strategy 40 for material A with Backward/Forward consumption of 60 days backward and 60 days forward.
My PIR is as follows :-
Material Month #1 Month #2 Month #3 Month #4 Month #5 ....
material A 100 100 100 100 100 ....
I created a Sales Order for material A with the quantity of 600 in Day 4 of Month #1.
After MRP run, planned order conversion and production order has been completed.
Month #1, Month #2 and Month #3 PIR's are consumed even though we made the setting in Such a way that the sales orders should just display but not planned . and the sales orders are into the blocked requirements list in the result of /n/afs/MD02.
1)but why it is consuming the PIRS?
2)is there any affect of backward and forward consumption on this?
Thanks in advance.
Regards
Bhargavi Desai

Hi,
Normally it is recommended that, not to delete PIR's one by one or remove quantity from previous periods/ requirement manually. If the PIR's of previous month is not consumed it is normally a feedback to sales people to do a analysis at their end.
In PP point of view, normally a re-organization run is carried out by MD74, MD75 or MD76. The same can be done by scheduling batch job to run on month ends basis w.r.t. period you specify.
Regards,
Narresh

PIR not showing in Md04 after certain date

Hi
The PIR's are coming from LTP.
The PIR's which are created after 03/2015 are not showing in MD04
MRP run back ground with NETCH still why PIR's are not showing?
What settings I have to check..
Regards,
Srihari.M

Please check the following :
1.If you have done splitting of the required qty during PIR creation . , please check in MD62 whether , you have un-checked the Active Version for some of them .If those qty. are falling after 03/2015 , then it will not pop up in MD04
2.While creation of PIR , if the planning period is beyond planning horizon , it will flag you a message and requirement will not display in MD04 , then check the same in OMPD and compare with planning period.
Regards
JH

Mixed MRP indicator 1 for PIR consumption of STO

I am aware that Mixed MRP indicator is used in planning strategies 70, 11 and 74.
could some one please help me understand the rationale behind using mixed mrp indicator 1 for consuming PIR by Stock transfer documents using BADI MD_PIR_FLEX_CONS
http://wiki.sdn.sap.com/wiki/display/ERPLO/PIRconsumptionwithStockTransport+Documents

Question is
what is the technical reason behind using mixed mrp setting in material master for consuming pir with STO using badi dm_pir_flex_cons. I do not see how they are related??

Mass updation of PIR s-reg

Hi,
Through MD61 using either material number, product group , plan etc... we can update PIR s for limited part numbners only
is there any otehr transaction through which we can updated for mass
we have to update almost for 2000 parts
BDC also shall not be useful
any way to directly upload copying from some excel
any standard SAP transaction code for mass updation of PIR s?
regards,
madhu kiran.

Hi,
Either you can use the BAPI mentioned by our friend.
OR
Goto Tcode : MD61 and enter the Material / Plant and goto the intial screen and Copy paste the Material Number and Qty from An Excel sheet upto the number rows displayed in MD61 screen and press enter and then Click Page Down Ikon, system will show the new rows where you can copy and paste again from the Excel sheet and Repest the steps to complete 2000 materials.
OR
You can create the BDC , BDC will work for Tcode : MD61 .
Hope this will help you.
regards
radhak mk

When creating PO in ECC central contract not displayed automatically

Hi,
I'm testing if the central Contracts are displayed automatically when creating a PO (ME21N). The contract has been created in SRM. In ECC the contract is saved in table CC_DB_VIEW.
Is it possible that the contract is automatically assigned to the PO, when entering the vendor and material. For PIR this works fine.
Regards,
Alexander

Hi,
Create Contract Release Order Thru ME25.
Follow the steps from this document:
http://help.sap.com/saphelp_470/helpdata/en/75/ee0f4d55c811d189900000e8322d00/content.htm
Reetesh
Edited by: Reetesh Tiwary on Nov 17, 2011 3:52 PM

Currency Issue in Shopping cart & PIR

I am facing the following issue. Please let me know if there is a solution to this behavior.
User Employee currency in the PPOMA is USD.
User creates a shopping cart for a material ID for which there are 2 sources of supply. PIR details is in the attachment. PIR has CAD as
currency.
In the shopping cart, I do not see currencies at all for the PIRs . When I assign a supplier, in this case I expect 12.71 MXN to convert to USD at the line item level based on the exchange rate. This is not happening and the system is not converting the value based on the currency exchange rate. Exchange rates are maintained in the system.
Regards
Sathya

Hi Sathya,
Please check the following:
1.     Is your approval process defined at the header level or item level. Means approval is triggered based on the total value of SC.
2.     What is the company code currency - USD or ??
3.     If USD then the SC will take USD itself.
4.     When you create and order --> in the PO the Vendor currencies will be displayed with converted value.
5.     Also check when you click on assign vendor the 12.71 MXN should be your line item currency instead of 12.71 USD and total value should be converted to whatever company code currency.
6.     Please check in SRM/ERP - TCURR table whether the correct Exchange rate type for example M is maintained in both the systems. Please also create a manual PO in backend system to check whether it is working correctly in the backend.
7. Please check the following posts, may be helpful:-
http://scn.sap.com/thread/1910191
http://scn.sap.com/docs/DOC-2733
https://scn.sap.com/thread/2032441
http://scn.sap.com/thread/624279
From RBEI,
Snehal

Display of PIR

Similar Messages

Maybe you are looking for