Display only limited desired values for an infobject in selection screen
HI Gurus,
I have a requirement as follows.
After executing query, in the selection screen I should only able to find my desired values instead of all the values of master data table.
Example : Select from:
After executing query, in the selection screen of BEx Analyzer, for the infobject Status (0CRM_USSTAT) I should find below values only instead of all values from the dataprovider or master data table. That means only desired values should be available in the F4 selection. Can you please now tell me how to restrict this?
New
Open
In Process
Closed
Rejected
Overdue
Looking forward for the helpful answers.
Thanks,
Sasi
Hi Sasi,
Go to your Variable screen click the Adjacent Multiple selection Arrow button, Give the values
New
Open
In Process
Closed
Rejected
Overdue
Now click copy --> immdiatly click the adjacent button --> Click personalize Variable Value,
Next time onwards when you get variable screen --> click the last buton and Load Personalize Values --> if you click the multiple selections then u will see only the above values..
Thanks,
Sudhakar
Similar Messages
-
Popup Menu(F1- Help values) is not diaplying for a char at selection screen
Hi,
After executed the query, we are trying to get help (F4) values for info object Employee Group (EMPLGROUP) in the selection screen but it is taking long time nearly 1 hr and getting timed out. And for other Chars we are getting the help popup menu.
for your info...
There are only 6 values are there in Employee Group master data table.
And the characteristic settings in Business Explorer tab are as the following,
Display u2013 Text
Text type u2013 Default
BEx description u2013 Short description
Selection u2013 No selection Restriction
Query Def. Filter Value Selection u2013 Only values in Infoprovider
Query Execution Filter Val. Selection u2013 Only Posted Values for Navigation
Can any one please suggest us which settings we needs to change to get the popup menu (help values) for Employee Group at selection screen and what is the reason for not displaying the help popup menu?.
and can any one explain us about the setting "Query Execution Filter Val. Selection u2013 Only Posted Values for Navigation"
Thanks & Regards,
Raju. EHi,
I am getting the data aslo for Employee Group in the query when I drill down that char.
But I dont know why it is taking long time and getting time out to display the popup menu for help values at selection screen.
I think this is due to the below setting only at char level,
Query Execution Filter Val. Selection u2013 Only Posted Values for Navigation
and there are 3 opstions for the above seeting as below,
1. Only values in master data
2. Only values in Infoprovider
3. Only Posted Values for Navigation
Can any one help me, which opstion will solve the issue and can any one explain me what is the difference between 2 & 3
Thanks,
Raju. E -
Hi, I have implement push notification services for my Windows app . I used shell toast to display the notification on my app. The notification does come through but is cut-off - displaying only limited contents, I need the whole
set of contents to be displayed on the notification. I don't have much idea of windows app 's push services , can any one help please ?
NikithaHi Nikitha,
This is by design, ShellToast will only show the limited content, this is consistent with the design principle of notification, see
https://msdn.microsoft.com/en-us/library/windows/apps/hh465391.aspx
Present information in the simplest possible form. If your content doesn't require a headline, omit it. A message such as "Your download is complete." is entirely complete and needs no additional presentation.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Shell toast notification displaying only limited contents in push notification windows phone
Hi, I have implement push notification services for my Windows app . I used shell toast to display the notification on my app. The notification does come through but is cut-off - displaying only limited contents, I need the whole
set of contents to be displayed on the notification. I don't have much idea of windows app 's push services , can any one help please ?
NikithaHi Nikitha,
This is by design, ShellToast will only show the limited content, this is consistent with the design principle of notification, see
https://msdn.microsoft.com/en-us/library/windows/apps/hh465391.aspx
Present information in the simplest possible form. If your content doesn't require a headline, omit it. A message such as "Your download is complete." is entirely complete and needs no additional presentation.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I am having major problems with Firefox. About 3 weeks ago I started experiencing the display only when on Firefox for all web site, that the display would be shifted right about half a screen. It only happens on Firefox and happens for all web sites.
This issue can be caused by the Babylon Toolbar 1.1.8 extension
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
How to display a block next to another bock in a selection screen?
Hi,
I want to show several blocks in a selection screen, but they are displayed one below the other. How can I display them parallel?
My Coding:
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001 NO INTERVALS.
*parameters
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001 NO INTERVALS.
*parameters
SELECTION-SCREEN END OF BLOCK b2.use like following in Report :
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS SESSION RADIOBUTTON GROUP CTU. "create session
SELECTION-SCREEN COMMENT 3(20) TEXT-S07 FOR FIELD SESSION.
selection-screen position 45.
PARAMETERS CTU RADIOBUTTON GROUP CTU. "call transaction
SELECTION-SCREEN COMMENT 48(20) TEXT-S08 FOR FIELD CTU.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) TEXT-S01 FOR FIELD GROUP.
selection-screen position 25.
PARAMETERS GROUP(12). "group name of session
SELECTION-SCREEN COMMENT 48(20) TEXT-S05 FOR FIELD CTUMODE.
selection-screen position 70.
PARAMETERS CTUMODE LIKE CTU_PARAMS-DISMODE DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE. -
How to pass Selection screen values to another program's selection screen
Hello,
I have a requriement where in which i need to pass the selection screen values (say list of pernrs) and few others of one program to selection screen of another.
One option that i came across is using Submit. But am unware how to pass only the selection screen values (there wont be any data processing or filtering). Just the values of one prgm's selection screen are to be sent to another.
Thanks
RKprog1.
data:lt_params type table of RSPARAMS.
data:wa like line of lt_params.
parameters:pa1 type sy-datum.
select-options:so1 type sy-dtaum.
wa-SELNAME = 'PA2'. "Seletion screen field name
wa-KIND = 'P'. "P-Parameter,S-Select-options
wa-SIGN = 'I'. "I-in
wa-OPTION = 'EQ'. "EQ,BT,CP
wa-LOW = pa1. "Selection Option Low,Parameter value
append wa to lt_params.
loop at so1.
wa-SELNAME = 'SO2'. "Seletion screen field name
wa-KIND = 'S'. "P-Parameter,S-Select-options
wa-SIGN = 'I'. "I-in
wa-OPTION = 'EQ'. "EQ,BT,CP
wa-LOW = so1-low. "Selection Option Low,Parameter value
wa-HIGH = so1-high. "Selection Option Low,Parameter value
append wa to lt_params.
endloop.
CALL FUNCTION 'SUBMIT_REPORT'
EXPORTING
report = 'ZPROG2.' "report name of ur tocde
RET_VIA_LEAVE = '' "IF 'X' returns to the called program after execution
SKIP_SELSCREEN = 'X' "If 'X' selection screen of called program is not displayed
TABLES
SELECTION_TABLE = lt_params "Contains values to the selection screen
EXCEPTIONS
JUST_VIA_VARIANT = 1
NO_SUBMIT_AUTH = 2
OTHERS = 3
Prog2.
parameters:pa2 type sy-datum.
select-options:so2 type sy-dtaum.
write pa2.
skip 1.
loop at so2.
write:so2-low,so2-high.
skip 1.
endloop.
Edited by: Keshu Thekkillam on Aug 20, 2009 3:22 PM -
How to use table field values as dynamic parameters on selection screen
Hi,
I need help on dynamic selection parameters.
I need to display no. of parameters from the fields of a database table.
Basically i want to pass field values of a table to selection screen and we can use those values as parameter on selection screen.
If there are 10 entries in a table field( say field is field_name and entries are bukrs,kunnr etc.)
I need to display as many parameters on screen as many values are there in field_name( In this case it is 10)
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETERS:
p_bukrs(5) ,
p_kunnr(5) ,
SELECTION-SCREEN END OF BLOCK b2.
ThanxHi,
You can create it using Dynamic Program.Check this link below.
[Creating Dynamic Programs|http://help.sap.com/saphelp_46c/helpdata/en/9f/db996135c111d1829f0000e829fbfe/content.htm]
Hope this might help you.
Thanks,
Prashanth -
How to reset values in fileds of a selection screen?
I have a selection screen ,can you please tell me how to reset the values of the fields in selection screen.
Hi,
SELECTION-SCREEN: begin of block blk,
SELECT-OPTIONS FL_DATE FOR SBOOK_WA-FLDATE.
SELECTION-SCREEN: End of block blk,
INITIALIZATION.
REFRESH FL_DATE.
Please Note: Always search SCN before posting.
Hope it helps you,
Regards,
Abhijit G. Borkar -
Code for execute button on selection screen to get result
hi experts,
I need a help for writing a code for execution button on selection screen.Like in normal report on abap editor
we insert selection criteria like number and we get the result according that particular number on next screen.
same thing i am trying here also. So i am writing a code on button that when i press the button it will go to the next
screen according to the selection criteria.
Plz help me helpful answers are appriatiated !!!
Thanks & regards
Vipul Guptahi,
In the OnAction write :
1. get the values entered in selection criteria using :
DATA lo_nd_cn_check TYPE REF TO if_wd_context_node.
DATA lo_el_cn_check TYPE REF TO if_wd_context_element.
DATA ls_cn_check TYPE wd_this->element_cn_check.
DATA lv_ca_check LIKE ls_cn_check-ca_check.
navigate from <CONTEXT> to <CN_CHECK> via lead selection
lo_nd_cn_check = wd_context->get_child_node( name = wd_this->wdctx_cn_check ).
get element via lead selection
lo_el_cn_check = lo_nd_cn_check->get_element( ).
get single attribute
lo_el_cn_check->get_attribute(
EXPORTING
name = `CA_CHECK`
IMPORTING
value = lv_ca_check ).
Now lv_ca_check has your value entered in Selection criteria.
2. write the select query to fetch data according to selection criteria.
select * from <table> into correponding field of table <internl table>
where Field = lv_ca_check.
3. Now in the internal table <internl table> you have values according to search criteria.
4. Bind the internal table with node which is binded to table to show data.
lo_nd->bind_table( internaltable ).
I hope it is clear . -
Displaying 2 parameters with descriptions in same line of Selection-Screen
Hi All,
I want to know how can we display 2 parameters with descriptions in same line of Selection-Screen.
Means in selection screen first we will give comment as
<b>Material no</b> then <b>parameter box as MARA-MATNR</b>, In the same line description as <b>Plant</b> then <b>parameter box as T001W-WERKS</b>.
Material No - BOX - Plant - BOX.
Can any body tell me how can we do it.
Thanks in advance.
Thanks & Regards,
Rayeez.Hi shaik,
1. define two TEXT-SYMBOLS :
001 Material
002 Plant
and Activate
2. use this code (just copy paste)
REPORT abc LINE-SIZE 80.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(10) text-001 FOR FIELD p_matnr.
PARAMETERS : p_matnr TYPE mara-matnr.
SELECTION-SCREEN COMMENT 35(10) text-002 FOR FIELD p_werks.
PARAMETERS: p_werks TYPE t001w-werks.
SELECTION-SCREEN END OF LINE.
regards,
amit m. -
Specify printer for payment summary, or select screen output
Hi All,
I have scheduled a Job using F110 tcode...with Run ID and identification...the job is continously running without any end...when i cancel the job..in job log entries i got "Specify printer for payment summary, or select screen output
Message no. BFIBL02 615" ...what could be the reason behind this..do i need to specify printer any where??
Kindly helpHi
tru to check the variant you're using for the report to print the payment advises or the list of payment
Here you need to indicate the printer
Max -
How to create tcode for modulepool program with selection screen?
hi,
How to create tcode for modulepool program with selection screen?
thanks,
sagarHi,
We need to goto SE80.
In our program we right click on object name and goto create
-> transaction. Enter the module pool program and screen number and save and activate.
Or by SE93 also we can create a transaction code for our program.
Hope ths helps.
plz reward if useful.
thanks,
dhanashri..
Edited by: Dhanashri Pawar on Jul 22, 2008 8:29 AM -
WAD - display only the last value in the chart
hi...
I designed a chart in WAD wich displayed a range of values in a line. Now im searching for a possibility to display the value for the points in my chart, but not for all values, only for the last value in the line! And every month the line will extended with new value-points, so it is necassary that the function is dynamic, always for the last point in the chart the value should displayed!?
thx for some ideas!
davidhi @ all... once more information:
the chart displayed only one keyfigure of a query. for example it display the revenue per month. in jan. = 10, feb. = 15, mar. = 25, apr. = 13, jun. = 23. these values should be displayed in a line in the chart aaaand additional for the last one in the line the valuecaption direct in the chart (f.e.: jun. = 23). not for all "periods-points"only for the last one.
in jul. = 25 the chart changed and only for july the value-caption should be displayed. Is it possible?
Regards,
David -
Report results displays only (*), no numeric values.
Dear all,
The report result only displays asterick (*), no numeric values. But the field in the result thus has numbers which can be seen in display at the top in the excel sheet. why?
Do i need to make any changes in Query properties or something else??
Please advise.Hi,
You should be trying to work to different units of measure or different currency. If you do any calculation with two values which has different unit then the result will be so.
use NODIM() of the keyfigure and do the calculation. create a formula and add NODIM to keyfigure, then you should be able to see values but you will not get the unit along with value.
Else you should go for conversion of units to single one and then you can get both values and units.
Hope this helps
Regards
Akhan
Maybe you are looking for
-
How do I stop facebook syncing back to iphoto?
Everytime I open iphoto the photos seem to go in both directions ie: they are re-loaded to FB and everyone gets spammed with tags but also all the dates change in iphoto like they are freshly downloaded, not just in the FB album but in the event as w
-
Error in the LSMW for vendor master using standard batch/direct input
I am facing the problem in the LSMW for the Vendor master data. The vendor is initially created for the company code 350 by using LSMW. NOw when I try to uploasd the same vendor using the same LSMW for the company code 450 then I get the error in the
-
Basically, I just want to know if this will have any effect on my Firefox, and if this will occur each time I update the Flash player, because I DON'T want Chrome! I want AND prefer Firefox!
-
Hi Twice recently I have lost access to my BT homehub broadband wifi have tried all sorts inc turning everything off from router through tried also to disconnect my Ipad accedd and then reinstall but again no joy Im not very tech savvy so basic instr
-
My battery wont hold a charge long than 30 mim
i plug my ipod into charge untill says full and once i unplug it i dies within the next 30 min and it is only a year old