How to reset values in fileds of a selection screen?

I have a selection screen ,can you please tell me how to reset the values of the fields in selection screen.

Hi,
SELECTION-SCREEN: begin of block blk,
SELECT-OPTIONS FL_DATE FOR SBOOK_WA-FLDATE.
SELECTION-SCREEN: End of block blk,
INITIALIZATION.
REFRESH FL_DATE.
Please Note: Always search SCN before posting.
Hope it helps you,
Regards,
Abhijit G. Borkar

Similar Messages

How to populate values into a Listbox on selection screen

Hi All,
Please any one let me know how to populate values (for ex.01,02 and 03) in a list box of selection screen..
Thanks,
Vijay

Try this code ...
REPORT ZLISTBOX.
TYPE-POOLS: VRM.
TABLES SPFLI.
TABLES SSCRFIELDS.
DATA flag.
DATA: NAME TYPE VRM_ID,
LIST TYPE VRM_VALUES,
VALUE LIKE LINE OF LIST.
PARAMETERS PS_PARM LIKE SPFLI-CARRID AS LISTBOX VISIBLE LENGTH 5
USER-COMMAND fcodex.
data: i_spfli type spfli occurs 0 with header line.
PARAMETERS PQ_PARAM LIKE SPFLI-connid AS LISTBOX VISIBLE LENGTH 15
USER-COMMAND
fcodey.
*DS AS CHECKBOX USER-COMMAND FLAG.
INITIALIZATION.
NAME = 'PS_PARM'.
DATA T TYPE I VALUE 0.
SELECT DISTINCT carrid into corresponding fields of table i_spfli FROM
SPFLI.
loop at i_spfli.
VALUE-KEY = i_spfli-CARRID.
VALUE-TEXT = i_spfli-CARRID.
APPEND VALUE TO LIST.
endloop.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
ID = NAME
VALUES = LIST.
AT SELECTION-SCREEN.
if sy-ucomm eq 'FCODEX'.
REFRESH LIST.
CLEAR LIST.
PQ_PARAM = ' '.
NAME = 'PQ_PARAM'.
SELECT * FROM SPFLI WHERE CARRID = PS_PARM.
VALUE-KEY = SPFLI-connid.
VALUE-TEXT = SPFLI-connid.
APPEND VALUE TO LIST.
ENDSELECT.
endif.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SY-UCOMM NE 'FCODEX' OR SY-UCOMM NE 'FCODEY'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
ID = NAME
VALUES = LIST.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
START-OF-SELECTION.
clear i_spfli.
refresh i_spfli.
select * into table i_spfli from spfli where carrid = ps_parm and connid
= pq_param.
loop at i_spfli.
WRITE: / 'CITY FROM:', I_SPFLI-CITYFROM, 'CITY TO :',I_SPFLI-CITYTO,
'DEPARTURE TIME :', I_SPFLI-DEPTIME.
ENDLOOP.

How to pass Selection screen values to another program's selection screen

Hello,
I have a requriement where in which i need to pass the selection screen values (say list of pernrs) and few others of one program to selection screen of another.
One option that i came across is using Submit. But am unware how to pass only the selection screen values (there wont be any data processing or filtering). Just the values of one prgm's selection screen are to be sent to another.
Thanks
RK

prog1.
data:lt_params type table of RSPARAMS.
data:wa like line of lt_params.
parameters:pa1 type sy-datum.
select-options:so1 type sy-dtaum.
wa-SELNAME = 'PA2'.               "Seletion screen field name
wa-KIND     = 'P'.                    "P-Parameter,S-Select-options
wa-SIGN     = 'I'.                    "I-in
wa-OPTION     = 'EQ'.               "EQ,BT,CP
wa-LOW     = pa1.                    "Selection Option Low,Parameter value
append wa to lt_params.
loop at so1.
wa-SELNAME = 'SO2'.               "Seletion screen field name
wa-KIND     = 'S'.                    "P-Parameter,S-Select-options
wa-SIGN     = 'I'.                    "I-in
wa-OPTION     = 'EQ'.               "EQ,BT,CP
wa-LOW     = so1-low.               "Selection Option Low,Parameter value
wa-HIGH     = so1-high.               "Selection Option Low,Parameter value
append wa to lt_params.
endloop.
CALL FUNCTION 'SUBMIT_REPORT'
EXPORTING
    report                 = 'ZPROG2.'   "report name of ur tocde
    RET_VIA_LEAVE          = ''            "IF 'X' returns to the called program after execution
    SKIP_SELSCREEN         = 'X'       "If 'X' selection screen of called program is not displayed
TABLES
   SELECTION_TABLE        = lt_params       "Contains values to the selection screen
EXCEPTIONS
JUST_VIA_VARIANT       = 1
NO_SUBMIT_AUTH         = 2
OTHERS                 = 3
Prog2.
parameters:pa2 type sy-datum.
select-options:so2 type sy-dtaum.
write pa2.
skip 1.
loop at so2.
write:so2-low,so2-high.
skip 1.
endloop.
Edited by: Keshu Thekkillam on Aug 20, 2009 3:22 PM

How to use table field values as dynamic parameters on selection screen

Hi,
I need help on dynamic selection parameters.
I need to display no. of parameters from the fields of a database table.
Basically i want to pass field values of a table to selection screen and we can use those values as parameter on selection screen.
If there are 10 entries in a table field( say field is field_name and entries are bukrs,kunnr etc.)
I need to display as many parameters on screen as many values are there in field_name( In this case it is 10)
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETERS:
p_bukrs(5) ,
p_kunnr(5) ,
SELECTION-SCREEN END OF BLOCK b2.
Thanx

Hi,
You can create it using Dynamic Program.Check this link below.
[Creating Dynamic Programs|http://help.sap.com/saphelp_46c/helpdata/en/9f/db996135c111d1829f0000e829fbfe/content.htm]
Hope this might help you.
Thanks,
Prashanth

How to schedule the background job using current selection screen field val

Hello Friends,
How to schedule the background job using current selection screen field values.
after completion of the job the spool should be sent as a mail to SAP Inbox.
Is there any way to create the variant dynamically by reading the current selection screen values.
Thanks,
Ravi

Hi,
To get the variant details you can use teh following FM.
'RS_VARIANT_CONTENTS'.
Regards,
Ankur Parab

How to Create a DropDown Box in a Selection Screen.

Hi,
I have a question. i.e, How to create a dropdown box in a Selection Screen. Could you please assist me.
Thanks & Regards
Sathish Kumar

hi satish,
The following can assist u to create a drop down ....
Drop down list box can be created in a dialog screen(SE51) as well as selection screen.
The sap list box allows to select a value from the list but we cannot enter our own value in the list box .The value list that will be displayed consists of two
fields TEXT field of TYPE 80(C) and internal KEY field of TYPE 40(C).
In screen painter to create a input/output field into list box we use
'L" as a value for dropdown attribute for the i/o field.
In screen painter to determine the type of method that will be used to fill the value
list we use the attribute value list.
If it is blank the value list will be filled by the first column of the input help assigned to the screen field.This input help can be defined in the ABAP Dictionary, on screen using SELECT,VALUES screen statements or in event POV (PROCESS ON VALUE-REQUEST ) and the input help that will be passed to the field should consists of 2 columns ,the key column is filled automatically by the system.SAP recommends value list field should be blank.
or
The value can be 'A' meaning that the value list will be filled in the event PBO(PROCESS BEFORE OUTPUT) or before the screen is displayed.In this method we use function module VRM_SET_VALUES to fill the values and pass it to the i/o field.
If a function code is attached to the list box the selection of a value triggers a PAI
otherwise PAI will not trigger.
Example
Dropdown list boxes
REPORT DEMO_DYNPRO_DROPDOWN_LISTBOX.
TYPE-POOLS VRM.
DATA: NAME TYPE VRM_ID,
      LIST TYPE VRM_VALUES,
      VALUE LIKE LINE OF LIST.
DATA: WA_SPFLI TYPE SPFLI,
      OK_CODE LIKE SY-UCOMM,
      SAVE_OK LIKE SY-UCOMM.
TABLES DEMOF4HELP.
NAME = 'DEMOF4HELP-CONNID'.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE INIT_LISTBOX OUTPUT.
CLEAR DEMOF4HELP-CONNID.
SELECT CONNID CITYFROM CITYTO DEPTIME
    FROM SPFLI
    INTO CORRESPONDING FIELDS OF WA_SPFLI
   WHERE CARRID = DEMOF4HELP-CARRIER2.
    VALUE-KEY = WA_SPFLI-CONNID.
    WRITE WA_SPFLI-DEPTIME TO VALUE-TEXT
                           USING EDIT MASK '__:__:__'.
    CONCATENATE VALUE-TEXT
                WA_SPFLI-CITYFROM
                WA_SPFLI-CITYTO
                INTO VALUE-TEXT SEPARATED BY SPACE.
    APPEND VALUE TO LIST.
ENDSELECT.
CALL FUNCTION 'VRM_SET_VALUES'
       EXPORTING
            ID              = NAME
            VALUES          = LIST.
ENDMODULE.
MODULE USER_COMMAND_100.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'CARRIER'
     AND NOT DEMOF4HELP-CARRIER2 IS INITIAL.
    LEAVE TO SCREEN 200.
ELSE.
    SET SCREEN 100.
ENDIF.
ENDMODULE.
MODULE USER_COMMAND_200.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'SELECTED'.
    MESSAGE I888(BCTRAIN) WITH TEXT-001 DEMOF4HELP-CARRIER2
                                        DEMOF4HELP-CONNID.
ENDIF.
ENDMODULE.
Reward if useful.
Thank you,
Regards.

Restrict variable values in the pop-up selection screen

Hi,
I have a variable based on a caracteristic that has 0COMP_CODE as attribute in a Web Report (BW 3.1B).
This variable has to be accessible so that users can select a value.
I need to restrict the values that users can see on the selection screen according to their 0COMP_CODE value, even in the pop-up.
I have tryed authorization variable and user exit, but none worked.
The best I could do was a "several single values" variable that was preselected with the caracteristics of their 0COMP_CODE, but it didn't worked in the pop-up.
Does anybody knows how to handle this?

As far as I could find out, it should be made through customer exit.
The point is : I have to use a customer exit variable that has been check as "ready for input".
I can't find a way to restrict the values displayed in the variable selection screen (in the help pop-up window for this variable).
The exit can pre-fill the selection fields with values, but whenever the user opens the window, he sees all the values.
I have tryed all the values for I_STEP (0,1,2 and 3) but none did it.
Does anybody knows how to limit those values?

How to link a search help to a selection screen field

Hi All,
I am using field PKWRG from PA0017 table in selection screen. I need F4 help there as in Tcode PA30 . But this field does not have value table or check table. However, it has a search help attached 'TRV_PKWRG' .
But, I donot know how to assign a search help to a selection screen field. Please help.
Regards,
Nibha

Hello,
Fetch all the data which from the table which you want to show in the search help and pass the value to the FM
F4IF_INT_TABLE_VALUE_REQUEST and the selection-screen event must be
at selection-screen on value request parameter or selection option variable.
BCALV_TEST_FULLSCREEN
BCALV_TEST_FULLSCREEN_CALLS
BCALV_TEST_FULLSCREEN_PRINT
BCALV_TEST_FULLSCREEN_STATUS
BCALV_TEST_GRID
BCALV_TEST_GRID_DRAG_DROP
BCALV_TEST_GRID_EDITABLE
BCALV_TEST_GRID_EVENTS
BCALV_TEST_GRID_INDEX
BCALV_TEST_GRID_TOOLBAR
BCALV_TEST_HIERSEQ_LIST
BCALV_TEST_LIST
BCALV_TEST_LIST_PRINT
BCALV_TEST_LIST_STATUS
BCALV_VERIFY_DTYPES_D0100_F01
BCSMENUF01
BDLCOF10
BDLDVI10
BDLTREDF

How to create Drop down menu in the selection screen

Hi all,
How to create Drop down menu in the selection screen.
Fast answer will be highly rewarded
Regards
Bikas

hi ,
TYPE-POOLS : vrm.
TABLES:vbak,vbap.
DATA : v(80) TYPE c.
DATA: wa_vbak TYPE vbak,
      it_vbak TYPE vbak OCCURS 0 WITH HEADER LINE,
      wa_vbap TYPE vbap,
      it_vbap TYPE vbap OCCURS 0 WITH HEADER LINE.
DATA: l_name TYPE vrm_id,
        li_list TYPE vrm_values ,
        v_count TYPE i,
        l_value LIKE LINE OF li_list.
PARAMETERS: p_test(20) AS LISTBOX VISIBLE LENGTH 60 MODIF ID DAT.
INITIALIZATION.
AT SELECTION-SCREEN OUTPUT.
PERFORM get_data.
LOOP AT it_vbak.
    l_value-key = it_vbak-vbeln .
    l_value-text = it_vbak-vbeln .
    APPEND l_value TO li_list.
ENDLOOP.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = 'P_TEST'
      values          = li_list
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
AT SELECTION-SCREEN ON P_TEST.
clear : li_list , li_list[].
SELECT vbeln
         matnr
         meins
         FROM vbap
         INTO CORRESPONDING FIELDS OF TABLE it_vbap
         WHERE vbeln = p_test.
START-OF-SELECTION.
SELECT vbeln
         matnr
         meins
         FROM vbap
         INTO CORRESPONDING FIELDS OF TABLE it_vbap
         WHERE vbeln = p_test.
LOOP AT it_vbap.
    WRITE :/ it_vbap-vbeln, it_vbap-matnr,it_vbap-meins.
ENDLOOP.
*&      Form get_Data
      text
--> p1        text
<-- p2        text
FORM get_data .
SELECT vbeln
          FROM vbak
          INTO CORRESPONDING FIELDS OF TABLE it_vbak.
ENDFORM.                    " get_Data
regards,
venkat.

How can i set dynamice for week on Selection screen..pls help me..Urgent

Hi..All
please Help me .. i am very confused..
i need to set a varient for week which is dynamic on selection screen.
b) Week from current week to current week + 2. (<b>Dynamic selection)</b>how can i set dynamice for week on Selection screen,,
how can i do this..i am alrady set dynamice variant for Date.. there is option for D.. but in case of week there is a no option.
pls help me..urgent
thamks in advance.
mayukh

Hi,
I think the way out is use the dynamic select option while setting up the varinat and use sy-datum to sy-datum+9 which should essentially serve the purpose.
While saving the variant, for that particular date field check the Selection variable checkbox, then Choose D
option and then choose current days + or - option from there.
Rgds,
HR

How many push buttons can u place on selection screen application tool bard

hi
how many push buttons can u place on selection screen application tool bar
and what is default function code for that buttons.

Hi Chaitanya,
You can place maximum 5 push buttons on Application Toolbar.
please award the points incase if you are able to get the solution.
Thanks
Sivaram

How to create tcode for modulepool program with selection screen?

hi,
How to create tcode for modulepool program with selection screen?
thanks,
sagar

Hi,
We need to goto SE80.
In our program we right click on object name and goto create
-> transaction. Enter the module pool program and screen number and save and activate.
Or by SE93 also we can create a transaction code for our program.
Hope ths helps.
plz reward if useful.
thanks,
dhanashri..
Edited by: Dhanashri Pawar on Jul 22, 2008 8:29 AM

How to reset values in a Data Form Bean?

I have created an ADF application that has a search facility in it. The architecture is as follows:
DataPage (search.jsp) --> DataAction (validateSearch) -->DataAction (refreshCollection) --> DataPage (results.jsp)
I have successfully created a data form bean to hold the data that is submitted in the search and bind it to the refresh method of the collection. I have also successfully overridden the validate method, which catches and throws and displays appropriate ActionErrors on the search.jsp page.
I have added a link back to the search.jsp page from the results.jsp page (as a user may wish to perform another search), the ActionErrors are resetting ok but I have not managed to work out how to reset the values of the actual data form bean.
I have tried several different ways of overriding the reset method within the data form bean but so far have been unsuccessful - I would appreciate any assistance with this matter.
Shown here is a basic example of a form bean that I have been trying different things out with - I can not get the reset method to even be called - please help!
package uk.dmf.eg02;
import javax.servlet.http.HttpServletRequest;
import org.apache.struts.action.ActionError;
import org.apache.struts.action.ActionErrors;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionMapping;
public class searchForm extends ActionForm
String search;
public setupForm()
public ActionErrors validate(ActionMapping mapping, HttpServletRequest request)
ActionErrors errors = new ActionErrors();
if (search.trim().length()==0)
errors.add("search", new ActionError("error.search"));
return errors;
public void reset(ActionMapping mapping, HttpServletRequest request)
System.err.println("EXECUTING RESET METHOD");
this.search = "";
public void setSearch(String search)
this.search = search;
public String getSearch()
return search;

If you run in request scope the reset method is called, however in session scope is't only called once (or never?). See documentation of method reset():
public void reset(ActionMapping mapping,
javax.servlet.http.HttpServletRequest request)
Reset bean properties to their default state, as needed. This method is called before the properties are repopulated by the controller.
The default implementation does nothing. In practice, the only properties that need to be reset are those which represent checkboxes on a session-scoped form. Otherwise, properties can be given initial values where the field is declared.
If the form is stored in session-scope so that values can be collected over multiple requests (a "wizard"), you must be very careful of which properties, if any, are reset. As mentioned, session-scope checkboxes must be reset to false for any page where this property is set. This is because the client does not submit a checkbox value when it is clear (false). If a session-scoped checkbox is not proactively reset, it can never be set to false.
This method is not the appropriate place to initialize form value for an "update" type page (this should be done in a setup Action). You mainly need to worry about setting checkbox values to false; most of the time you can leave this method unimplemented.

How to reset values in module pool?

Hi ,
I have a requirement to refresh all the values from the screen on pressing the reset button.
I have one main screen which have the reset button and four subscreens, and each subscreen has different set
of fields.i am clearing the values in each subscreen. But the values are not getting cleared,
When I debugged i saw the values are getting cleared but it is not getting assigned in the screen.
Kindly help.

Hi Nidhi,
When the user tries to reset use the statement.
Leave to transaction <Your transaction code>.

How to restrict user to get values only from F4 in selection screen

Hi All,
We have given a Search hlep for a parameter in selection screen of a report,but now we are facing a issue, whlile executing the report user entering the data directly into field instead of selecting from F4 help.
Do anyone know how to restric the user from entering the data directly.
i have searched the fourm ,but not get any good tread.
Regards
CB
Moderator Message: Search harder, because there are many threads that have discussed the same issue before.
Edited by: kishan P on Dec 27, 2010 4:00 PM

You cna check my reply here To enter the value by selecting values from the F4 help only.

How to reset values in fileds of a selection screen?

Similar Messages

Maybe you are looking for