Display problems with adobe viewer contain.

I can not see the preview of my folio from InDesign, the content viewer once it starts i get a gray screen.
Using version 1.3.0.

I installed the Folio Producer tools for Macintosh,
but has not been updated content viewer (which was version 1.3.0).
http://www.adobe.com/support/downloads/product.jsp?product=172&platform=Macintosh
Do you have a direct link to download the latest version?
thanks

Similar Messages

How can I solve the problem with Adobe viewer/player ?

Dear guys in Apple support team
I have a MacBook Pro 13' late 2011, several months ago I updated my mac to mountain lion and I can say its really great operating system and I really enjoy working with it. The only problem I have is that more than twice a day while using my computer for reading a paper in PDF or in online PDF's or sometimes watching flash videos online, cooling fan starts to work faster and when I look up in the activity monitor, more than 60% of the CPU processing is engaged with Adobe player/viewer and I have to kill the process to stop cooling fan and release the cpu process. My adobe products are in the latest update and there should not be any problem about that.
Please help me solve this problem and enjoy more than ever from your creative products.
Thank a lot
Ali

Flash has always been a problem hogging the CPU. Recent versions, however, have been a little better. You might try Adobe Flash Player 11.7.700.169. I would also recommend the Safari extensions ClickToFlash 2.7.5 and FlashToHTML5 2.4.

Problems with Adobe viewer

Recently I upgraded my IOS to Lion and ever since then, when I get a pdf document, I have to save it to my computer before it will open the file. This is sooo frustrating!! I have looked and looked for a setting to allow the pdf to just open and display. Any suggestions?

I am on a website right now that I click a link and a PDF should come up with information on it and I instead get the prompt to save a file. These used to just pop open. They are not PDF attachments but links. I am usig Firefox. I don't want to block the pop ups...I want to make sure they are unblocked on Firefox. The info on Safari helped to verify that popups are allowed on Safari. I just checked on Firefox and popups were blocked. There was another tab for "Applications". When I located Adobe, it showed the action to take as "save file". I just changed it to "Use Adobe Reader". Yahoo! That should do it.
Thanks again. You got me to the right place!! =)

There is a problem with Adobe Acrobat/Reader. If it is running please exit and try again. (0:521)

There is a problem with Adobe Acrobat/Reader. If it is running please exit and try again. (0:521)
Although I have found other threads in this forum relating to this error - none of the fixes appear to work. I've not found precisely the same error number (0:521), might I need a different fix for this? Has anyone else had the same error?
Just to note, this appears to be an issue with Internet Explorer 8 on Windows 7 while viewing pdfs 'in-browser' i.e. using the plugin. Other versions of IE on other machines and FF on the same machine work fine on the same pdfs. It also works if you right click the pdf, download and view it in Acrobat Reader 'locally'.
Any help greatly appreciated, I'm stumped.

We were getting the same error on a Win 7 machine which had Acrobat 7 (running in compatability mode) and Reader X installed. When the user was trying to open the link from an email the error 'There is a problem with Adobe Acrobat.....(0:521) would appear and the pdf would not load.
Investigating the problem I can across an article to uncheck the option "Display PDF in browser" (in the application choose Edit -> Preferences -> Internet). Undertaking this procedure in Acrobat Reader X however, I could not uncheck this and the path the app was showing was for Acrobat 7!?!
Therefore, opened Acrobat 7 and undertook the same procedure. Unchecked the "Display PDF in browser" (in the application choose Edit -> Preferences -> Internet) which I was able to do, saved and closed the application.
Rechecked Acrobat X and the "Display PDF in browser" could be deselected and the path was now for ..\Reader 10.0\Reader\AcroRd32.exe
Retried the original email with the link to the pdf and it now opens without error.
Not too sure if this will help but just thought I would share.

I have problem with Adobe ColdFusion Server Manager.

I have a problem with Adobe ColdFusion Server Manager when you log on and connect to the server. An advantage of the settings do not load.

When I see others screen cuts of CF Server Manager here:
http://www.coldfusionjedi.com/index.cfm/2009/10/21/Quick-example-of-Diff-within-the-ColdFu sion-Server-Manager
http://forta.com/blog/index.cfm/2009/7/6/Simplified-ColdFusion-Server-Management
the Errors View button display’s the yellow ! sign. Without a better guide I just thought that is a normal button icon until I noticed Charlie comment earlier in the thread and I thought hold up that is not normal.
As it is when I press Errors View I get “no error” which might be because there is none or just simply not giving meaningful details as per some other CF Server Manager limitations previously noticed in other threads on forum here.
I just hope some of that helps the original post to do with the display of the settings on left side. Maybe a better look at the error might help? Does anything get logged in CFadmin UI > Debugging & Logging > Log Files that relates to issue?
Regards, Carl.

Problem with HTML viewer

Dear All ,
I am facing a problem with HTML Viewer . My senario is as follows :
1. I have created one HTML page . On that page there are 4 Images
2. I imported that HTML page in SAP with the help of transaction SMW0
3. I Called that HTML page in my ABAP program using the method "load_html_document" of class cl_gui_html_viewer
4. This is happening perfectly ok on the machine on which all this developement was done.
But the issue is when I execute my ABAP program on a different machine , those Images on that HTML page are not displaying.
Can you please guide me how to remove that machine dependancy?
Regards,
Nikhil

Hi Nikhil,
Please check if the image is properly imported properly. Also check if there is any option which you might have forgotten while imported like dependeency.
Regards
Abhii...

Problem with adobe premiere CS5 file not responding

I have a problem with Adobe Premiere software, some time ago I was given a file in Adobe Premiere project contains a hard drive to my revision. but when i try to do the project on my computer I was often faced with the problem of not responding. What should I do with this constraint. Thank you.

I would suggest your first action to be logging this question on the user forum for Adobe Premier, not this one for Adobe Captivate.
Try here...

Problem with Adobe Premiere Elements 10 : error DW046

Dear community members,
I have bought Adobe Premiere Elements 10 and installed it from the DVDs on my MAC OSX10.5.8 on december 27, 2013
When creating a new project , I get the following message :
following a serious error, Premiere Elements 10 must stop
Then I click OK and I get a new message :
The Premiere 10 application has closed suddenly after having been rebooted
Then I end up to the error report window. I have sent the error report to Apple ( I can send it to you if you want)
I have also got the following error message :
DW046 : following conflicting process were running, block : dynamiclinkmanager
Notice : it seems this problem is occuring since I underwent a power failure while working on a project. When I want to open an existing project I get the following message :
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
When I say YES, I save it and it comes back to the welcome menu and I cannot see this project.
I have tried to deinstall and reinstall Premiere 10 : this is impossible since I am required to deactivate dynamiclinkmanager that I cannot find.
Notice that Adobe AIR is unable to find a solution whilst it recognizes there is a problem.
Thanks you for your help

AT Romano,
The various links you have provided were very helpful. I could kill the dynamiclinkmanager.
It seems that it is now working.
Thank you, your reply was very quick and your advices very good
Kitaguchi38
Date: Wed, 1 Jan 2014 19:39:00 -0800
From: [email protected]
To: [email protected]
Subject: problem with Adobe Premiere Elements 10 : error DW046
    Re: problem with Adobe Premiere Elements 10 : error DW046
    created by A.T. Romano in Premiere Elements - View the full discussion
kitaguchi38
When you get the message
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
Do you go to the last AutoSave to open that or do you go to the save location of the project file (project.prel) to open that file?
Are you getting message to close the dynamiclinkmanager so that you can move forward?
If so, please check out dynamiclinkmanager location in the following link
http://helpx.adobe.com/photoshop-elements/kb/preference-file-locations -photoshop-elements.html
Have you seen this Photoshop Elements Forum thread with the same DW046?
http://support.muse.adobe.com/message/4771879
More later.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972397#5972397
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972397#5972397
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972397#5972397. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Problem with adobe reader, commenting

one of our authors is using adobe reader x 11,1, and I send him a pdf (enabled commenting and measuring), but for some reason the commenting-fields does not show on his screen?
should I save the pdf in another way?

What do you mean by "commenting fields" exactly? By “commenting filds” I mean the tools in top of the page – delete, highlight etc. When I send the pdf, I save it as “file - save as - reader extended pdf – enable commenting and measuring”, otherwise the commenting tools normally don’t appear by the author.
Are they existing comments? no, it is the text in his pdf-book he needs to correct
Is he able to access the commenting tools? no
You can try sending a non-enabled version since Reader 11 can add comments to a non-enabled document. will try that J
Fra: George Johnson [email protected]
Sendt: 6. november 2012 16:16
Til: Forlagene Idag & Nordan
Emne: problem with adobe reader, commenting
Re: problem with adobe reader, commenting
created by George Johnson <http://forums.adobe.com/people/George_Johnson> in Creating, Editing & Exporting PDFs - View the full discussion <http://forums.adobe.com/message/4826849#4826849

Message that says there is a problem with adobe/acrobat/reader

Can't view or download from internet. Message that says, There is a problem with Adobe/Acrobat/Reader. If it is running, please exit & try again.(0:104)

Hi Ciny Lu,
Please try steps mentioned here: http://forums.adobe.com/message/4605418
~Deepak

I get this message when I try to open .pdf files in Mozilla: There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (1014:1014)

What can I do to get this to work?

We were getting the same error on a Win 7 machine which had Acrobat 7 (running in compatability mode) and Reader X installed. When the user was trying to open the link from an email the error 'There is a problem with Adobe Acrobat.....(0:521) would appear and the pdf would not load.
Investigating the problem I can across an article to uncheck the option "Display PDF in browser" (in the application choose Edit -> Preferences -> Internet). Undertaking this procedure in Acrobat Reader X however, I could not uncheck this and the path the app was showing was for Acrobat 7!?!
Therefore, opened Acrobat 7 and undertook the same procedure. Unchecked the "Display PDF in browser" (in the application choose Edit -> Preferences -> Internet) which I was able to do, saved and closed the application.
Rechecked Acrobat X and the "Display PDF in browser" could be deselected and the path was now for ..\Reader 10.0\Reader\AcroRd32.exe
Retried the original email with the link to the pdf and it now opens without error.
Not too sure if this will help but just thought I would share.

There is a problem with Adobe Acrobat/Reader. Please exit Adobe Acrobat/Reader and try again.

We have Adobe Reader 8.1.3 set to open in the browser.
We are trying to open PDF files within IE Browser. While opening multiple documents in the IE Browser, we get "There is a problem with Adobe Acrobat/Reader. Please exit Adobe Acrobat/Reader and try again." error, once we click on the "OK" button, PDF file opens in the Adobe reader. This happens randomly while some files open up in IE Browser and some files get the above mentioned error message and open in the Adobe Reader.
We need to open all the PDF files in the IE Browser. Any input is greatly appreciated.

I may be better off without the tool bar, but I have found anohter solution;
. Open Adobe Reader,
            go to edit menu,
            under Preferences
            go to Internet, uncheck "Display pdf in browser"
The pdf files then open, but not in the browser

There is a Problem with Adobe Acrobat/Reader. If it is running, please exit and try again (1014:101

Hi
I have this problem with Adobe Reader 11.0.01. It displays this message "There is a Problem with Adobe Acrobat/Reader. If it is running, please exit and try again (1014:1014). This is in Internet explorer when attempting to open Reader links.
This is on a Windows XP SP3 machine.
Please help me find a solution for this?

Try the Acrobat and Reader Cleaner tool. Then re-install.
http://labs.adobe.com/downloads/acrobatcleaner.html

Error message: there is a problem with adobe acrobat reader. if it is running please exit and try a

error message: there is a problem with adobe acrobat reader. if it is running please exit and try again (0:104) How can I fix this?

Hi Claudio, Thanks for your assistance. I'm still confused. When I click on this site it tells me: To view this FTP site in Windows Explorer, CLICK PAGE, and then click Open FTP Site in Windows Explorer. I do not see "Page" on this list. There is a "pace"... though.

Error: "There is a problem With Adobe Acrobat/Reader..." What is .MST file??

I get the following error message and I looked it up in the knowledge base, and there was a solution for fixing the error message. However, I have no idea what they are talking about. I have downloaded the Customization Wizard, but I have no clue what the following means:
A) Create a new transform
B) Open your previously created .mst file
I went into the C Drive and opened Program Files. I found the Adobe folder, but I couldn't find an .mst file anywhere. Am I completely lost??? Below is the knowledge base solution:
Error: "There is a problem With Adobe Acrobat/Reader..." when you view a PDF in a browser (Acrobat and Adobe Reader 8 on Windows)
Issue
When you try to view a PDF in Internet Explorer, you see the error message, "There is a problem With Adobe Acrobat/Reader. Please exit Adobe Acrobat/Reader and try again." When you click OK to the error, the PDF opens outside of the browser.
Reason
When you use the Adobe Customization Wizard to create a transform for Adobe Acrobat 8 or Adobe Reader 8, and you choose the option to "Make Acrobat the default viewer if both Acrobat and Reader are installed", or "Make Reader the default viewer if both Acrobat and Reader are installed", an error occurs if the computer does not have Acrobat or Reader already installed.
Solution
Create a new transform and re-deploy Acrobat or Adobe Reader.
Start the Adobe Customization Wizard 8.
Open your previously created .mst file.
Under Installation Options, select "Installer will decide which product will be the default".
Save the transform.
Re-deploy Acrobat or Adobe Reader.
Additional Information
When you create a transform in Adobe Customization Wizard 8, the installation options allow you to set the default viewer for PDF files. "Installer will decide which product will be the default" is the default setting and should be used when you are uncertain if the target machine has a version of Acrobat or Adobe Reader that won't be removed as part of the installation process. When installed silently using this option, Acrobat will always be configured as the default viewer.

I think you are headed down the wrong path. The Customization Wizard is what you use to push out Reader to several hundred computers. An MST is a package or transform file that is used to accomplish this task. Unless you are an IT person and are trying a deployment of Reader this solution does not fit your situation.

Display problems with adobe viewer contain.

Similar Messages

Maybe you are looking for