Display T - tru or F - false based on condition
Hello,
Could you please let me know how to display T - true or F - False based on condition.
I am only able to display 0 and 1 but i want F and T instead.
thanks
Gade.
Hi,
I donot think that it is possible simply with Query designer features. You better think about the Macros . The below thread can be considered as an example(mr. Deveshwar reply).
Display Date as 00/00/0000 instead of # if date field is empty
With rgds,
Anil Kumar Sharma .P
Similar Messages
-
Displaying only the relevant table data based on condition
Is it possible to display a part of a table based on a condition which is not in that table.
My example - I am using the spreadsheet to determine the accumulation of $$ in an account over a period of time and then how quickly that would be spent at a designated withdrawal rate.
However, I only want to display the values that relate to the time frame I specify.
So in one table I have Personal Data like income, savings, age, interest rate, spending etc.
In this table I have one column as Age Today and another is Age to stop, then age to Start spending.
My second tale has all the relevant calculations to accumulate and then withdraw and spend the money.
What I am looking to do is create and display the relevant portions of the table which refer to the Age Today and Age to Stop.
Is this possible?Hello
At this time, there is no such a feature in Numbers.
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'09
Yvan KOENIG (from FRANCE samedi 29 mars 2008 11:05:22) -
Display input field on selection screen based on condition
Hi,
I have a report with selection with no of input fields and a checkbox .I want to hide few i/p fileds based on checkbox i/p.
If the checkbox = 'X',then only those fields should apper on screen for input.
how do we get this on sel screen.
thanks in advance.Hi,
you can use this code as reference.
Here, depens on check box, in the next screen resepective select options will be displayed.
You can use this logic for your requirement.
REPORT Z50871_SELECTOPS_DYNAMIC.
PARAMETERS : CH_EBELN AS CHECKBOX,
CH_VBELN AS CHECKBOX.
DATA: V_EBELN TYPE EKKO-EBELN,
V_VBELN TYPE VBAK-VBELN.
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECT-OPTIONS : EBELN FOR V_EBELN MODIF ID G1,
VBELN FOR V_VBELN MODIF ID G2.
SELECTION-SCREEN END OF SCREEN 100 .
AT SELECTION-SCREEN OUTPUT.
IF SY-DYNNR = 100.
IF CH_EBELN = 'X' AND
CH_VBELN = ''.
LOOP AT SCREEN.
IF SCREEN-GROUP1 EQ 'G1'.
SCREEN-ACTIVE = '1'.
ELSE.
SCREEN-ACTIVE = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF CH_VBELN = 'X' AND
CH_EBELN = '' .
LOOP AT SCREEN.
IF SCREEN-GROUP1 EQ 'G2'.
SCREEN-ACTIVE = '1'.
ELSE.
SCREEN-ACTIVE = '0'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSEIF CH_EBELN = 'X' AND CH_VBELN = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 EQ 'G1'
OR SCREEN-GROUP1 EQ 'G2' .
SCREEN-ACTIVE = '1'.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF SY-DYNNR = 1000.
IF CH_EBELN = 'X' OR CH_VBELN = 'X'.
CALL SELECTION-SCREEN 100.
ELSE.
MESSAGE I000(Z50871MSG) WITH 'Please select atleast one checkbox'.
ENDIF.
ENDIF.
Regards
Sandeep Reddy -
Which Get command will display all $True & $False parameters
Hi,
I am a newbie when it comes to commands in the EMC. We have Exchange 2010. I have 2 mailboxes that should do the same thing but they do not. Both are calendar mailboxes (resource mailboxes I think maybe) and one mailbox is working correctly
and the other is not.
I would like to go into the EMC and run some commands to compare the settings of both mailboxes. However if I run the Get-Mailbox command I only get one line of info back. (I am not actually sure what the correct Get-Mailbox??? command is at this time,
I have that on my work computer).
I would like to know what Get-Mailbox command will display all of the $True and all of the $False parameters. I have seen these displayed on websites while trying to troubleshoot this issue, but I haven't seem the command posted that returns all of
this information, I need that command!
I hope I made sense, I can explain further if needed. Thanks in advance!What is the command that will output this...
RunspaceId : aa671879-75ca-4961-a103-4dcd35254689
AutomateProcessing : AutoAccept
AllowConflicts : False
BookingWindowInDays : 180
MaximumDurationInMinutes : 1440
AllowRecurringMeetings : True
EnforceSchedulingHorizon : True
ScheduleOnlyDuringWorkHours : False
ConflictPercentageAllowed : 0
MaximumConflictInstances : 0
ForwardRequestsToDelegates : True
DeleteAttachments : True
DeleteComments : True
RemovePrivateProperty : True
DeleteSubject : True
AddOrganizerToSubject : True
DeleteNonCalendarItems : True
TentativePendingApproval : True
EnableResponseDetails : True
OrganizerInfo : True
ResourceDelegates : {}
RequestOutOfPolicy : {}
AllRequestOutOfPolicy : False
BookInPolicy : {}
AllBookInPolicy : True
RequestInPolicy : {}
AllRequestInPolicy : False
AddAdditionalResponse : False
AdditionalResponse :
RemoveOldMeetingMessages : True
AddNewRequestsTentatively : False
ProcessExternalMeetingMessages : True
RemoveForwardedMeetingNotifications : False
MailboxOwnerId : offwire.com/Offwire Users/Exchange/Exchange Resources/Resource - K2
Identity : offwire.com/Offwire Users/Exchange/Exchange Resources/Resource - K2
IsValid : True
I ran the command you mentioned above (thank you!) and it gave back a lot of info that I am going to go through right now. But I was wondering what the command would be to output this data? -
How to display at true actual size (Mac)
The background: InDesign was unable to display work at true actual size until CS6 came along. (So that 1 inch on the screen rulers equals 1 inch on a physical ruler.) Unfortunately, CS6 still doesn't get it right if your display is set to something other than its native resolution. For example, if I set my 27" NEC SpectraView display to "Best for Display" in the Displays system preference panel, then viewing at "Actual Size" in Indesign CS6 achieves true actual size. But that resolution is way too high, making the features of the user interface way too small. The comfortable display resolution is "scaled" to 1920x1080, which provides a nice 2-page layout viewing area (at true actual size) plus a comfortable user interface. However, InDesign CS6 ignores this and continues to draw the "Actual Size" view based on "best for display" resolution, and that results in a greatly shrunken image. Acrobat Pro has gotten this right for several versions now, but it is apparent from this and other CS shortcomings that the different product groups at Adobe aren't very good at what Samsung does and fail to copy each other's work.
The solution to achieving "true actual size" is a script written by Dave Saunders (and probably others) some time ago:
//by Dave Saunders. Replace the percentage number with the correct value for your screen
app.layoutWindows[0].zoomPercentage = 113;
If you're like me and don't really use scripts, here is what to do with it on a Mac (with apologies to Dave and other experts who know a helluva lot more about this than I do):
1. Copy the text for the script and paste it into the blank window that opens when you start ExtendScript Toolkit CS6 (in Applications>Utilities>Adobe Utilities - CS6). Leave it open.
2. Go to Acrobat Pro>Preferences>Page Display and under Resolution note the number associated with "Use system setting". (On my system it is 81 pixels/inch.) I also suggest enabling that setting if it isn't, so that Acrobat also displays at true actual size.
3. Divide the number from Acrobat by 72, then multiply by 100. (This is essentially a percentage calculation of system resolution over the conversion value of 72 points/inch, which produces 112.5 in my example. I round it to 113.)
4. In the open script, change the number to what you got from the above result (113 in my example).
5. Save the script with a name such as "True actual size.jsx" and leave it on the Desktop where you can get it at later for dragging.
6. In InDesign, go to Window>Utilities>Scripts, then right click on User and choose Reveal in Finder. Drag your script into the User folder. (I recommend option-dragging it to leave the original on your Desktop for archiving.)
7. Test the script in an open InDesign document by double clicking on the script. The display should now show your work at true actual size.
8. The scripts window is awkward at best, so the last step is to assign a keyboard shortcut to your script. I use Control-1. Go to Edit>Keyboard Shortcuts… and choose Scripts. Scroll down to the bottom, where you should see your script listed. Highlight it and enter Control-1 (or whatever you prefer) into the New Shortcut window and click Assign. Then click Save. You won't be allowed to modify the Default set, but I was fine with "Default copy".
Now whenever you want to view your work at true actual size, just hit Control-1 (or whatever you chose for a keyboard shortcut).
You might want to copy these instructions into a TextEdit file and put it with your script file in a folder that you can find when the time comes to upgrade to CS7, because I'll lay odds that you're going to need to achieve true actual size all over again.
Lastly and far from least, thank you for the script, Dave! If you or other pros come across this and see corrections or improvements, please set me straight.Finder -> View menu -> Show Status Bar
Regards. -
CFGrid - 1st maxlength for a cfgridcolumn/ 2nd - YES entered displayed as True?
I have an cfgridrow that should only allow 3 digits, is there a way to set the maxlength on a cfgridcolumn? If so, how is this done?
2nd:
I have a column for notes:
<CFGRIDCOLUMN NAME="TeamNotes" SELECT="YES" HEADER="Team Notes" TYPE="STRING_NOCASE">
if Yes is typed in and saved when the screen is refreshed it is displayed as TRUE (but in the database is saved as Yes) happens also with No (displayed as False) is there a way to make it displayed exactly what is in the database?Thanks, Shawn.
All that being said, the best solution would be to not create a DVD. This sort of project would be much easier, and give you better results if you did this in Flash. The only reason I could see to use a DVD would be if the testers only had access to a DVD player and not a computer.
That was exactly my sugestion as well. But the client is quite insistent on creating the project as a DVD - yes the DVD Player uption is a requirement.
I have created DVD with several thousand links... very daunting, but turned out well and the customer was very happy.
I reviewed the DVDSP manual to make sure what the customer wanted was not covered, but I wanted to make sure.
What I have suggested is that when I student gets an answer wrong that an option is given to review the relavent section. Since there will be less that 100 question, it would not be a big deal to created an appropriate final score bases on a GPRM value.
Thank you very much for the rreply. It is greatly apprecaited. -
How to display F4 values in one field based on other field selection
Hi All,
How to hide a UI element (i.e Link to action) highlited for Normal User and display the same to super user.
Component Name : /SAPSRM/WDC_DODC_SC_GAF_C
2.Can i know how to display the entries in supplier field based on Product category selection.
Right now all the entries are getting displayed in the supplier field.
I want to display only entries based on Product category.
Search Help Name : BBP_BUPA_CLL_PARTNER
Component Name : /SAPSRM/WDC_DODC_SC_I_LIM
How to enhance the web dynpro component with the filtered values.
Regards,
Krish.Hi Ashvin,
Thanks for the document. In the search help there is a standard FM which is getting executed.
Can i enhance that FM or should i copy and edit.
BBP_F4IF_SHLP_EXIT_CLL_PARTNER
If i creata a Z FM and make changes how to pass that values to my standard Component View UI Element.
If not then suggest me some alternative.
Regards,
Krish -
How do I display or hide a Java menu based on current url in a php page
How do I display or hide a Javascript menu based on the current url in a php page?
I want to specify when a java menu appears on a page based on the current url - does anyone have a script for the vars and conditional statements to make this happen - it would be something like this in natural language:
<javascript>
if currenturl = http://jemmakidd.com/categories.php
then displaymenu
else if currenturl = http://jemmakidd.com/categories.php?cat=14 (or 15,16 etc)
then DONOTdisplaymenu
What is needed is that, if you look at this page there is a java menu under the first category:
http://jemmakidd.com/categories.php
I WANT the menu to appear on that page so that is working, however if I look at one of the store categories, like on this page, I do NOT want the menu to appear - it may be that this can be done without using a java current url type function - thats why I'm asking...
http://jemmakidd.com/categories.php?cat=14
So to summarise:
http://jemmakidd.com/categories.php (If this url is used DO display menu - if any other url DONT display menu)
Thanks again...any ideas?
Edited by: littlealex2009 on Jul 15, 2009 12:51 AMThis is a Java forum, not a Javascript forum. Google the differences.
kind regards,
Jos -
I would like to know how to set Firefox so it displays the true URL of a link when I hover my mouse over that link.
It's been many moons since I've used a Fireberd, since I'm no longer with the phone company, but if memory serves, that can be turned of directly with a fireberd command. You might check the manual for that. If so, then all you need is a simple "send GPIB" command from Labview
Eric
Eric P. Nichols
P.O. Box 56235
North Pole, AK 99705 -
BAPI for displaying materian/description/Bin storage/ qty based on producti
Hii All,
please gv which bapi we use to display Bin storage, Material n qty based on production order number
its very urgentHi,
You can try with user exit MWMBAP02
<b>Reward points</b>
Regards -
Display issue with some browser : OnMouse based on An Application Process
Hello,
I am playing a little bit with the Application Process and I tried to create something like the Aria Demo (onmouseover="ARIA_DETAIL(this, '#PERSON_ID#')")
Indeed, no problem to make it work (using a default template among the 20 provided by Apex) BUT the issue is the following :
- With IE ... the DISPLAY of bulb (tooltip --> dynamic output based on Application Process / PL/SQL) is fine (right of the link where the mouse is placed).
- With Chrome and/or Mozzila : the DISPLAY (bulb or the tooltip) is on the upper/left corner of the Report.
I tried to use the theme template provided with the Aria Demo Appli (ID : 120) --> no problem with Chrome or Mozilla
I am eager to know if this is something related to the template (and how to make it work if I use one of the template provided by Apex).
ManyThanks in Advance
RegardsCan anyone help ?
Gus -
Display image based on conditions.
Hi every one.
We have to display image (circle) based on three conditions.
Example; if employee is < 1000 small circle, if salary is > 1000 and < 10000 medium size circle and >10000 big size circle.
And second condition if employee location is East coast fill black color in that circle, west coast red color central green color.
Third condition is if employee joining date is less than two years I should display * (Star symbol) in that circle.
I am trying to create conditional format but it is possible to display only one image .
My question is how can I change size and color if the image based on conditions and display start symbol with in the image.
I think I have to create different own images to display for every conditions.
Is there any way to create my report?
Thank you very much for your time and help.Hi,
If you want to display everything in one image for end user you need to do some trick.
sal orginal region orginal Joining date Sal decode value Region decode value Joining date decode value ImageCode
100 east 20\2\2008 1 10 100 111
200 WEST 20\2\2008 1 20 100 121
300 NORTH 20\2\2009 1 30 200 211
300 NORTH 20\2\2008 1 30 100 131
100 east 20\2\2008 1 10 100 111
2000 west 20\2\2009 2 20 200 222
30000 south 20\2\2009 3 40 200 243
Create few more columns in your answers, as following
Salary decode value: based on your original salary decode it to 1 or 2 or 3
region decode value: based on your regions decode it to 10 or 20 or 30 or 40
joining date decode value: based on joining date decode it to 100 or 200
Image code add all of decoded values ie 1+10+100 = 111
In report show image based on image code
i.e from above table row1 image code is 111 (small black circle), last record BigCircle Red with Star.
Pain full thing is you need to create 24 images on your own(3(salary range)*4(regions)*2(join dates) =24) and place all 24 conditions in that column.
--Hope it helped you
Thanks
Srinivas Malyala -
Revision: 12057
Revision: 12057
Author: [email protected]
Date: 2009-11-20 11:22:05 -0800 (Fri, 20 Nov 2009)
Log Message:
Label (and RichText) will show text as tooltip if truncated and new showTruncationTip flag is set to true (defaults to false because Label is often used in skin that have their own tooltip logic).
QE Notes: New API (showTruncationTip)
Doc Notes: New API (showTruncationTip)
Bugs: SDK-23639
Reviewer: Gordon
API Change: Yes
Is noteworthy for integration: Yes
tests: checkintests mustella/gumbo/components/Button mustella/gumbo/components/Label
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-23639
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/TextBase.asHi blabla12345,
(untested and without warranty)
replace this line:
const sSaveCUBE = "CUBE";
with this:
const sSaveCUBE = "cube";
Have fun -
I want to run AutoCad 2009 and work in 3d. Which lenovo meets the minimum reqs.? i.e. Intel or AMD Dual Core processor, 2.0 GHz or greater • 2 GB RAM or greater • 2 GB free hard disk available not including installation • 1,280 x 1,024 32-bit color video display adapter (true color) 128 MB or greater, OpenGL®, or Direct3D® capable workstation class graphics card. For Windows Vista, a Direct3D-capable workstation-class graphics card with 128 MB or greater is required.
Which model is the least exspensive with the minumum reqs.?
Clarification: I want to run AutoCad 2009 in 3d. Re: 1,280 x 1,024 32-bit color . . .
Note from Moderator: Please don't post the same message in multiple boards/threads as it splinters the discussion. Duplicate(s) removed.
Message Edited by JaneL on 02-08-2009 10:01 PM
Solved!
Go to Solution.Any ThinkPad with discrete or switchable graphics will work...T400/500, R400/500, W500/700...make sure that you're not getting the one with Intel integrated GPU and you'll be all set...
FWIW, even T61/p with discrete GPU will run this with no sweat...
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
Display Non-zero values of keyfigures based on a particular value of a char
Hi Gurus,
I would like to display only Non-zero values for keyfigures but only for a particular value of a characteristic. For Ex: We have material Group. For a particular value of material group, i do not want to display the zero stock. But for other material groups it should display zero stock.
I tried to use conditions, but the problem is it suppresses all the zero values for the keyfigure for material group in general and not for a particular value of the material group.
Is there is any way that i can go about for this scenario. Pls help.
thanks & regards,
PSHi
Create a structure in the rows based on selections on material group. Eg.
Structure
Mat grp 1 (restricted to material during selection)
Mat grp 2
then add a formula in columns using boolean argument
e.g (exisisting KF >= 1)*1+0
Then you can use conditions to elimanate zeros on the new KF.
Hope it helps
Edited by: Karin van der Merwe on Feb 29, 2008 8:52 AM
Maybe you are looking for
-
How do i install numbers on multiple computers?
Obsticles: 1-When I copy Numbers from computer A, to computer B, I get: "Numbers cannot be opened because of a problem." So dead there. My suspecion is that I'm going to have to install it from scratch on the other computer. I attempted to go to the
-
Smtp;550 5.7.1 Unable to relay #SMTP#
our dev wrote a script that'll send an email externally but it bounces with the following error: smtp;550 5.7.1 Unable to relay> #SMTP# Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the
-
Image will not load from lightroom to CS5
I am having an issue with external editing from lightroom to CS5! From develope>edit in CS5>images does not load! CS5 loads but the MAC finder app comes up asking me to choose a file! Never have I seen this. I looked into the preferences and the
-
Hi all ! Currently I�m developing a Java software that requires a Tree data structure. Searching through Java API I�ve found classes like TreeMap and TreeSet, but although these classes seens to use tree structure behind what they really provide are
-
How do I Shorten a Column Title in a List
Hello, I have a form that I am creating using a Custom List in SharePoint 2013 and 2 of the questions are quite long and it makes for a sloppy view on the page. Is there a way to shorten the questions length shown in the view? I am using SP2013 on