Which Get command will display all $True & $False parameters

Hi,
I am a newbie when it comes to commands in the EMC.  We have Exchange 2010.  I have 2 mailboxes that should do the same thing but they do not.  Both are calendar mailboxes (resource mailboxes I think maybe) and one mailbox is working correctly
and the other is not.
I would like to go into the EMC and run some commands to compare the settings of both mailboxes.  However if I run the Get-Mailbox command I only get one line of info back. (I am not actually sure what the correct Get-Mailbox??? command is at this time,
I have that on my work computer).
I would like to know what Get-Mailbox command will display all of the $True and all of the $False parameters.  I have seen these displayed on websites while trying to troubleshoot this issue, but I haven't seem the command posted that returns all of
this information, I need that command!
I hope I made sense, I can explain further if needed.  Thanks in advance!

What is the command that will output this...
RunspaceId                          : aa671879-75ca-4961-a103-4dcd35254689
AutomateProcessing                  : AutoAccept
AllowConflicts                      : False
BookingWindowInDays                 : 180
MaximumDurationInMinutes            : 1440
AllowRecurringMeetings              : True
EnforceSchedulingHorizon            : True
ScheduleOnlyDuringWorkHours         : False
ConflictPercentageAllowed           : 0
MaximumConflictInstances            : 0
ForwardRequestsToDelegates          : True
DeleteAttachments                   : True
DeleteComments                      : True
RemovePrivateProperty               : True
DeleteSubject                       : True
AddOrganizerToSubject               : True
DeleteNonCalendarItems              : True
TentativePendingApproval            : True
EnableResponseDetails               : True
OrganizerInfo                       : True
ResourceDelegates                   : {}
RequestOutOfPolicy                  : {}
AllRequestOutOfPolicy               : False
BookInPolicy                        : {}
AllBookInPolicy                     : True
RequestInPolicy                     : {}
AllRequestInPolicy                  : False
AddAdditionalResponse               : False
AdditionalResponse                  :
RemoveOldMeetingMessages            : True
AddNewRequestsTentatively           : False
ProcessExternalMeetingMessages      : True
RemoveForwardedMeetingNotifications : False
MailboxOwnerId                      : offwire.com/Offwire Users/Exchange/Exchange Resources/Resource - K2
Identity                            : offwire.com/Offwire Users/Exchange/Exchange Resources/Resource - K2
IsValid                             : True
I ran the command you mentioned above (thank you!) and it gave back a lot of info that I am going to go through right now.  But I was wondering what the command would be to output this data?

Similar Messages

  • Get-InboxRule Powershell Command To Display all Rules

    Hello,
    I am in need a powershell command that display all InboxRules per mailbox database. I want to export the information to a CSV and show DisplayName,IsValid,Name,From,RedirectTo as the the column names.
    I found this great article below but I have been unable to pull additional information like the DisplayName. 
    http://blogs.msdn.com/b/canberrapfe/archive/2012/11/05/ever-needed-to-find-server-side-outlook-rules-that-forward-mail-outside-of-your-organisation.aspx
    Any assistance would be greatly appreciated.
    This is what I have been working with so far.
    Get-MailboxDatabase -Identity 'db-f' | Get-Mailbox -ResultSize unlimited  | Get-InboxRule -ErrorAction:SilentlyContinue | Select-Object
    DisplayName, isvalid, @{Name="Forward To";Expression={[string]::join(";",($_.ForwardTo))}} | Export-Csv filename.csv
    Jason

    From the output you are selecting, it appears you are trying to pull rules that forward items to other recipients.  If this is the case, there is no value "DisplayName" returned by the Get-InboxRule command, so what you're going to need
    to do is put bits of information together into the data you want.  Try the following and see if it gives you something workable:
    $MbxDbs = Get-MailboxDatabase
    $MbxDbs | % {
        $DbName = $_.Name
        $DbMbxs = Get-Mailbox -Database $DbName
        $DbMbxs | % {
            $MbxName = $_.Name
            Get-InboxRule -Mailbox $MbxName
        } | Select @{E={ $DbName };L='Database'}, @{E={ $MbxName };L='DisplayName'}, $IsValid, `
            @{Name="ForwardTo";Expression={[string]::join(";",($_.ForwardTo))}}
    } | Export-Csv filename.csv
    In addition to the mailbox display name, I've written this to run through all databases, and added the database to the information returned, to show how you might pull other info into your CSV.  Notice from the Get-InboxRule output (Get-InboxRule
    | Get-Member) that there is also a MailboxOwnerId property, which holds the ADObjectID of the account owning the mailbox.  However, this is the DN of the account, which isn't as clean and readable as the mailbox's DisplayName property,
    which the above returns in the $MbxName = $_.Name line of code.
    If I'm barking up the wrong tree here, feel free to let me know.

  • Hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a

    hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

    For sideloaded content the nook pulls the metadata from ePub file itself.  I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
    For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so  no you can't them to behave exactly alike without converting the files.

  • Powershell DSC - Get registry value and send $True / $False depending on present or not

    Hello,
    With the script below, I can check if a registry key is present, and if it is not, it will create that registry key. But I just want to know if that registry key is present, and get $True / $False as a result of script. - Is this possible with DSC?
    Configuration ClientConfig
    Param ($MachineName)
    Node $MachineName
    Registry FooCorpReg1
    Ensure = "Present"
    Key = "HKEY_LOCAL_MACHINE\SOFTWARE\Test1"
    ValueName = "Name"
    ValueData = "DSCDemo"
    # Save the MOF file
    ClientConfig -MachineName "localhost" -OutPutPath "c:\Temp\DSC"
    #Start configuration
    Start-DscConfiguration -Path "C:\Temp\DSC\" -Wait -Verbose
    Best regards,
    Anders Johansson

    Not what DSC does or is for.  Use erg to look for vale.
    Test-Path HKLM:\SOFTWARE\Test1\Name
    That is all - it returns true or false.
    ¯\_(ツ)_/¯

  • Is it possible to get the sum of all true (checked) columns?

    I am totally new to numbers, and I have just a vague understanding of excel, so I be needing some help.
    I am a hairstylist and I am using my iPad for client tracking.  My spreadsheet has totals referring to amount of clients, service totals, retail totals, average service tickets, etc.  I also need to track my pre-booking.  An easy way for me to track my pre's is to have a true/false check box column.  Is there a way to add up all of the true checks?  I have other factors I need to track like amount of services so I would like to utilize the true/false check boxes.  I do not want to add the adjoining columns, just the true false columns.  To clarify, I want to add all of the true check boxes with a resulting sum, of only the true (checked) boxes.
    Hopefully I'm not being mega confusing....

    Yes it is
    Use the COUNTIF function

  • Which iphone version will work all over the world?

    Hello there.Im from Pakistan.Need some info related to iPhone. Next month i'am going to Canada and planing to buy an iPhone 6 from there.. So im confused which version will work fine here in pakistan.. Kindly guide me about the version which should i buy. I want a version which works all over the world.. Waiting for reply, thankyou!

    An unlocked iPhone should do the trick. You need to get it in an Apple Store. I have traveled around the world with my British unlocked Iphone and I've had no problems switching between sims.
    Good luck! By the way, revise your phone while you are on the shop, you don't want to find any defects when you are back in Pakistan.

  • How to get result of PING whether TRUE/FALSE and prompt message to user?

    Hi all!!!!
    In Forms 6i, I need to know how to get the result of a ping if the ping is sucessful or not. It should prompt the user whether the connectivity is there or not after the ping statement which is HOST('PING 191.10.10.40'). As of now, when the user select the desired LOV, the corresponding HOST statement is executed. But if the connectivity is not there, the user is left in blank with a hanging situation... So can we not prompt the user if the connection has been failed or not?
    Regards

    Hi,
    You can try this.
    Redirect the output of the ping test to a file. Read the file using TEXT_IO and see if the test is passed. For ex
    host('ping <your_ip> > c:\ping_test.log');Will redirect the ping output to ping_test.log file under c:\ drive.
    Open the file using TEXT_IO and check if you have the text "Packets: Sent = 4, Received = 4, Lost = 0 (0% loss)". If you have, then the host is reachable. Otherwise its not. Depending on that, you can change the flow of your application.
    -Arun

  • How do I get commands to display on a "full screen" display of a downloaded PDF file?

    In recent months, more and more downloaded PDF files are displayed on my Mac Pro without the command line at the top of the page.  This makes using & managing the documents difficult, and sometimes impossible.  I can gain access to a limited number of commands by clicking on the doc, but noto nearly the range of commands available when the command line is visible.  I still have many older PDF files that display in the usual manner.  Is this a change associated with Lion or the latest Adobe update?  Or, si there a command I do not know about that will restore the command line?

    Adobe Reader for iOS doesn't have command lines.

  • Sqlplus command to display all schema/user in database

    Hi,
    What sqlplus command can list out all schemas/users in database?
    Ken

    select username from dba_users;
    will give you a list of the schema owners.
    Are you looking for more detail than this?
    Bob

  • Help! I need a simple powershell command to display all folders & files over the 260 char limit

    Can anyone help me please? I'm trying in vain to identify any files or folders I have in a directory over the 260 char limit.
    my powershell knowledge is quite limited so I've hit the wall with ideas.
    Any help appreciated.
    Thanks

    Would running this command on its own within powershell work?
    Or do I need to add this to your script?
    get-folderitem | Where {
    $_.fullname.length -gt 260

  • How can I get my iPod touch to display all the artwork on my computer?

    Hi,
    I have an iPod touch 4th gen 32 GB with iOS 6.1 on it.  I have trouble getting it to display all the album artwork that I have on my computer.  Not all of my music has it, but about 90% of it does.  Is there any way I can make it display everything that's on my computer?  I have iTunes 11 on it and it is a Windows 7 computer.  Thanks!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • How to display all running windows in xmonad ?(SOLVED)

    The function is same as pressing `alt+tab` in MS windows. When pressing the specified hot key, xmonad will display all running windows. And the user can choose and shift to the selected window, which may be on different workspace.
    Sincerely!
    Last edited by sw2wolf (2010-01-31 01:18:42)

    sure you can use keys to control volume.
    if you've got volume keys on your keyboard then you can use
    ((0, 0x1008ff11), spawn "aumix -v-6") -- volume--
    ((0, 0x1008ff13), spawn "aumix -v+6") -- volume++
    ((0, 0x1008ff12), spawn "amixer set Master toggle") -- mute
    else you can use other keys (like up/down) as keybindings to aumix & amixer.
    you can always use /usr/share/X11/XKeysymDB for keysymbols
    hope that helps
    Last edited by vik_k (2010-01-30 09:26:26)

  • Exporting Exchange User Details (get command)

    Hi,
    Which 'get' command I can use to export all Exchange AD user details like; Name,DisplayName,OrganizationalUnit,RecipientType,Title,Department,Office,Company,City,Manager
    which should be exported to a CSV file (to use it with another HR application)
    worth to mention: I need the report in CSV format itself for some reason.
    [I have tried
    get-mailbox
    and
    get-mailboxstatistics
      but doesn’t give all required fields.
    Then I tried
    get-user  but it gives only one column with some unique ID ]
    I have used the following get-user cmnd;
    Get-User -resultsize unlimited |FT Name,DisplayName,OrganizationalUnit,RecipientType,WindowsEmailAddress,Title,Department,Office,Company,city
    | Export-csv D:\userdetails.csv
    Please suggest

    Hi,
    Which 'get' command I can use to export all Exchange AD user details like; Name,DisplayName,OrganizationalUnit,RecipientType,Title,Department,Office,Company,City,Manager
    which should be exported to a CSV file (to use it with another HR application)
    worth to mention: I need the report in CSV format itself for some reason.
    [I have tried
    get-mailbox
    and
    get-mailboxstatistics
      but doesn’t give all required fields.
    Then I tried
    get-user  but it gives only one column with some unique ID ]
    I have used the following get-user cmnd;
    Get-User -resultsize unlimited |FT Name,DisplayName,OrganizationalUnit,RecipientType,WindowsEmailAddress,Title,Department,Office,Company,city
    | Export-csv D:\userdetails.csv
    Please suggest
    Don't use FT before Export-CSV.  That screws up the output and you probably aren't getting the information.  Try Get-User -ResultSize Unlimited | select name, displayname, OrganizationUnit, Re........ | Export-CSV -path <path for csv>.csv -NoType
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

  • Display all my pdf files according to their individual cover pages

    hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

    Moving to .NET support forum.
    To answer your question; yes, in a WEB app using the DHTML viewer. Go to the properties of the Crystal Reports viewer. Find the property "SeparatePages". Set this to false. There is no such option in a WIN app.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • I did a backup on my iPod touch and it said it worked...but now it won't let me access anything and says "iTunes has detected an iPod in recovery mode.  You must restore this IPod before it can be used."  I will lose all my videos and pics if I do that

    I did a backup on my iPod touch last night and it said it worked...I wanted to make sure my 1100 pictures and videos, mostly of my son, were safe since we rarely use the iPod touch anymore since we bought an iPad...I can't find them or I have no idea how to access them...I do not have a MAC...I have an HP computer with windows...
    Now when I try to use my iTunes a message comes up that says my iPod is on recovery mode and has to do a restore to use my iTunes again...so when u click on that it states that pushing that button will restore my iPod touch to its factory settings...which means I will lose all my data...which I CANNOT do bc the videos of my son are some of his first words, first giggles, etc. 
    Now my iPod is stuck on a screen with a picture of a USB cord and an iTunes icon... and holding the power and push buttons down at the same time does nothing except bring up the apple icon for a moment and then it goes right back to the USB and iTunes icon
    When I called Apple they said in order to talk to tech support I had to pay a fee of 19 dollars...which I think is kind of crap...I paid over 300 dollars for this and all I want is somebody to help me access my pics...I have done nothing wrong...this iPod was never dropped and never broke...I did the backup like I was supposed to and now I have an IPod touch that does nothing, and if my library of pics and videos are on my computer, I have no clue where or how to view them or back them up onto DVD....
    I'm very upset and frustrated...please help!!!

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

Maybe you are looking for