Display Window Control IDs and other information

I am attempting to get control of certain controls on a 3rd party software window from my labWindows CVI application and I was wondering if there is a way to get a list of the controls on a specified window along with the control's ID using the WinAPI calls.
It would be ideal if I had a script that I could run that would give me a list of all controls (on an open window) with their ID, Child seq, & control name. Is there such a call in WinAPI to do this?
Thanks

It's most likely possible to do this with ActiveX. I've included a link to a tutorial below. As well, you will want to take a look at the following forum: http://forums.ni.com/t5/LabWindows-CVI/Is-it-possible-to-access-control-the-device-handles-of-contro...
Building ActiveX Servers in LabWindows/CVI
http://zone.ni.com/devzone/cda/tut/p/id/2714

Similar Messages

Itunes crashes while adding artwork and other information

Itunes crashes while adding artwork and other information to video and music files. Killing the process is the only cure and crashes after inputing information for 5-10 video files. I have the latest version of itunes, and this did not happen to pre 10.x versions of itunes. Running windows 7 ultimate 64 bit. 64-bit iTunes.

@tposchi
I do not think it has anything to do with router at all. I have 25mbps down and 6mbps up where I live. This is not shabby at all and I have latest TimeCapsule which is acts as my router at home. Yet the latest iTuns blows up playing streams. So I use this player instead: http://www.videolan.org/vlc/index.html. Not as pretty, but at least I can play radio stream 24 hours a day with it and have no problems. iTunes 10.7 does not last one hour I too wish Apple fix it.

Sharing apps,music ,and other information on 2 different pc and iphones.

my wife brought here 3g iphone first and has put appts, music and other information in itunes ,can I transfer the information to my itunes and scynch with my iphone?

The only data stored by iTunes in the iTunes library is iTunes content - music, video, podcasts, etc. including 3rd party apps. No other data is stored by iTunes. iTunes serves as the sync conduit between your iPhone and the supported applications on your computer for syncing contact info, calendar events, Safari bookmarks, and for transferring photos from your computer to your iPhone, but iTunes does not store any of this data.
You can transfer an iTunes library from one computer to another, but you will need to use your wife's iTunes account with iTunes on your computer if you currently have your own separate iTunes account.

Removing access to email and other information

A family member gave their phone away to a friend and (mistakenly) thought that deleting all of the information on the phone one by one (as opposed to doing the restore) would be sufficient. I think access to email and other information might still be present on the phone. Is there a way to disable access to the email account and other information remotely somehow?

Change the password for the email account, which will prevent the friend from downloading any new messages received at the incoming mail server for the account.
Without the passcode lock feature enabled, there is no way to prevent someone from accessing any data that is available on the iPhone.
Restoring the iPhone as a new iPhone is one option. The iPhone also includes an erase all contents and settings option, which is a secure erase.

How to get Mobile number and other information from SIM card

Hi,
I like to get mobile number,mobile user name and other information from SIM card using j2me program.Is there is any API for this one.
Any one give guidelines to me how to get this.
with regards,
latchiya

Please use the search! this topic has come up lots of times already.

How to use RM-1500 with a SB Live! USB to control winamp and other ap

I've been trying several apps (intelliremote, RMX and others) to do this, but no one seems to work properly. Does anyone knows if this is possible? Apparently those apps only work with non-usb sound cards.
The remote works, but I only can control the volume, mute and CMSS function.
Any help or comment will be very appreciated.
Thanks in advance!

Hi,
It can be quite frustrating to program using the DAQmxBase driver. Beaware, that this is just a temporary driver. The next release of the DAQmx driver will include the usb-600x series.
When this is said, you should be able to use the driver. To make sure that the device is working use one of the examples found by pressing the windows start button > Programs > National Instruments > DAQmxBase > Examples > LabVIEW.
The examples will give you a good starting point.
Also I would make sure that I had the newest version of the driver installed. Following link will provide that for you:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C128D?opendocument&node=132060_US
Let me know if this doesnt solve your problem.
Regards
Anders M
NI DK

In windows 7, buttons and other objects are not visable for most web sites. what shoud I do to fix this?

see question above...

If images are missing then check that you do not block images from some domains.
*Press the F10 key or tap the Alt key to bring up the hidden Menu bar.
Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
Check "Tools > Page Info > Media" for blocked images
*Select the first image link and use the cursor Down key to scroll through the list.
*If an image in the list is grayed and "Block Images from..." has a checkmark then remove this checkmark to unblock images from this domain.
Make sure that you do not block (third-party) images, the permissions.default.image pref on the about:config page should be 1.
Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*http://kb.mozillazine.org/Websites_look_wrong

HT1657 When I try to rent a movie from iTunes on my Apple TV it says the purchase could not be completed. My password is correct as well as my location and other information. What is the problem?

When I try to rent a movie on my Apple TV it states that the purchase could not be completed. My password is correct and location, user id, and other settings are correct. What is the problem?

If you are also getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these user-to-user forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

PCF file missing hostname and other information

Using Cisco VPN Client 4.8.01.0300, several users have reported issues with being unable to launch the VPN Client software. The client returns Error 5 - Hostname not available; upon reviewing the .PCF file, the hostname and other group info is now missing; an import of a valid .PCF file resolves the problem. I've seen variations of this issue discussed on this board, but no solution to the underlying problem - something corrupts the .PCF file.

i think the problem is because of cisco bug CSCsa74320

Why does TC sometimes display the airdisk icon and other times not

I've been trying to figure out why the connection speed of the TC can be so inconsistent, but one thing I've noticed is that the icon on my desktop of the TC is also inconsistent. Sometimes its the Airdisk icon (ie airport waves) and other times the Shared disk icon (ie people holding hands).
Anyone know what's up with that?

Pinwheel usually comes it waiting for something, usually hard drives cause this but you don't have one, it's a SSD.
If it occurs on another network, then you likely have a hardware problem of some sort.
Take it in to Apple.

When I copy and past text in a chat window there is a line of information that appears that describes the font and other information related to the pasted information. How do I stop that from displaying?

When I copy and paste this is what appear: @font-face { font-family: "Arial"; }@font-face { font-family: "ＭＳ明朝"; }@font-face { font-family: "ＭＳ明朝"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0in 0in 0.0001pt; font-size: 12pt;

Make sure that the editor that you use to compose the text is in plain text mode.
*http://en.wikipedia.org/wiki/List_of_text_editors
*http://en.wikipedia.org/wiki/TextEdit

HP PhotoSmart 6520, Printer offline, Wireless printing from Windows 8.1 and others

My parents own an HP PhotoSmart 6520. They have 3 or 4 computers. 1 Is connected to this printer via USB cable. 3 Are "connected" over wireless. The printer has the latest firmware updates according to checks from the printer front display.
Problem is this:
1) When first starting the printer, and the printer gets on the wifi network, all wifi-available devices can print to it over wifi. We are also able to browse to the printer config web pages to see status, and change configs as needed.
2) After about 5 minutes of printer inactivity, all wireless clients can't print to the printer to print, and can't connect to the printer's web page. (The printer appears to be offline to each OS that uses WiFi to get Internet access.
3) If we visit the printer control screen, physically attached to the pinter, find the network configuration, and choose to "turn off" wifi at the printer, then after off, "turn on" wifi and see an IP address get assigned, then all WiFi machines can print to the printer over WiFi. However, after 5 minutes, again, the printer is offline. No matter what or how much each WiFi-based machine sends to their printer queue/spool, the printer remains offline.
4) If the USB-connected machine prints to the printer over USB, the printer once again becomes available over the wireless network.
The work-around is terrible. (Cycle WiFi access every time they need to print from Wireless devices.)
Things we have tried:
1) This is running the latest firmware according to the WebService section request to check for upgrades. They are on the latest according to the results. (no help)
2) DHCP was the initial config for network settings. I moved to a DHCP server configuration with static IP served by printer MAC address. (No help)
3) I switched to totally static IP address, thinking it might be a DHCP lease-time/renewal issue, or custom vendor string issues or bug. (no help)
4) Enabled/Disabled IPv6 even though they are on a NAT-ed network with only IPv4 support. (no help)
5) Visited printer config with web broswer, and change energy saver setting from "5 minutes" to "15 minutes" because the ~5 minute window seemed like an approximate time limit. (No help)
6) Enable/Disable other settings through the web and restart the printer. (No help.)
7) Suggestions listed here: http://support.hp.com/us-en/product/HP-Photosmart-6520-e-All-in-One-Printer-series/5169038/model/516... (No help)
In testing this, with static IP or not, from other machines, when we can print over WiFi to the printer, the IPv4 address is ping-able from peers on the network. After ~5 minutes pass, and the pinter goes "offline" there are no ping replies to the static or other IP address assigned to this printer. By all accounts, when the printer is "offline" it really is no longer on the WiFi network. Meanwhile, oter devices can ping each other. (All computers, smartphones, tablets, etc can all respond to ping.)
None of the other devices suffer from dropped access to the WiFi and Internet.
Suggestions?
I do not have access to this right now, but I can walk my parents through whatever steps are needed to resolve this.
Thanks!
P.S. Other things tried:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/If-your-printer-drops-off-your-network/...
1) When online, generating report, reports online
2) When offline, report reports that it is still associated with access point
3) Printer is about 2 feet away from the access point it is communicating with and has max-bars showing signal strength.
4) Channel allocation for WiFi was selected based on least used channel, and works very well for all other devices on this channel.
5) There is only one accesspoint with the name it associates with.
6) The only options for power-saving "auto-off" we see via web pages from printer are: 5 minutes, 10 minutes, and 15 minutes, and changing to 15 minutes does not allow the printer to remain online for 14 minutes -- it still goes offline to the network after ~5 minutes -- even agfter changing this settings and power cycling the printer.
7) No wireless extender is being used.
8) We tried static IP, Dynamic IP, and statically assigned DHCP served IP.
Once printer is "offline" when visiting printer to tell printer to disable WiFi access, then re-enable it, all machines with items in their printer queue/spool *immediately* de-queue/de-spool their printer jobs to the printer.
This is the closest description: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Photosmart-6520-goes-off-line/td-p/324... Where is that patch?

Hi @TheSynAck,
I see you are using a Hot Spot, I believe we have found the reason for the connectivity issues. There may be a setting that needs to manually configured for the Hotspot to 'allow' your printer access. Also, hotspots may have limitations and restrictions that may cause connectivity issues.
Take a look here: Setting up the Printer as a HotSpot, it shows a Laserjet but the same steps apply.
Keep in mind that Hotspot connections are 'best effort' connections due to the issues of inconsistencies within the connection. They are not routers. Therefore, you may experience issues in the future when using the Hotspot for your connection. Usually a powercycle or hard reset of the HotSpot will resolve such issues.
I would not recommend getting another Hot Spot as the connection is not guaranteed, you could however try a Wireless Router if you are looking to upgrade anyways.
With the PS 6520 you also have the ability to print using the HP Wireless Direct printing option. Please click on the link below to get started:
HP Wireless Printers - Printing with HP Wireless Direct
I hope this gives you a better understanding of the intermittent connection issues.
Thanks again,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Access mirror site using java, download files and other information?

Hi, I have 2 nodes/servers on the system both running webservers and having the same interface, but at a time user will access one node at a time from their browser, but this interface will be able to allow the user to get information from the both the nodes. the information that the user can get is DB stored as well as files on the disk of either node.
i can manage the DB, cuz there is nothing to it, but how do I get files from the other node?
currently any files/web documents are all stored in a application directory of the web root and protected by htaccess i believe, so when a user logs on to node one he can access all plain text/binary files along with web content since the web server authorizes the user to access anything in that dir. but at the same time from the same session I want to be able to access files in a mirror site using the same username and password and not having him to enter it again. the username/pass combo is replicated on both the servers, it this possible?
currently i use the http password protection provided by apache to access one node, but can i use the same session on another machine with the same credentials?
If this is not possible how can i do this programatically using java? can i do can "ls" on the directory i want on another server and display the list to the user and then when he clicks on that file name i fetch it from the backup/mirror server and have him save it using http or ftp?
It would be great if we can get a solution to this.
Thank you very much in advance.
Ankur

If you install the web server on different machines, It is possible to share the informations between them.

Despite having the File Associations in both Windows Control Panel and Firefox Options set to Windows Media Player for *.mwv files Firefox tries to open them with Foxit pdf Reader, which bombs out - what now?

Making this entry from my Linux computer which handles the situation correctly.The real situation involves only a Toshiba laptop running Windows XP.

I used this link for tiff http://www.nrl.navy.mil/content.php?P=IMAGES
QT was opening the tiff files. When going into the QT control panel Browser>Mime settings>Images-Still image files I was able to uncheck tiff, which held. I was also able to uncheck all the file types under File Types tab(Images-Still image files) in the QT control panel. However the preference would not hold. Went into Start>Set Program Access and Defaults that also was of no help.
The only way I was able to get QT to release the tiff's from the website I posted was to go into the Folder Options control panel for File Types and change the tif & tiff from QT picture viewer to windows picture and fax viewer.
So not sure why the QT control panel will not respond, there are other file types in the Folder options control panel on this computer other than tiff's that are still associated to QT, but didn't try changing them, perhaps that needs to be done?
Good post I didn't realize this before reading your post, if I come across anything further I'll post back.

Where does the song metadata reside (cover art work and other information)?

I edit the metadata for each album/song - add cover art, correct any album name or artists erros, make some notes to myself to help search/browse. Where does this data reside - with the song file or the library file or somewhere else? BTW I don't download the cover artwork from iTunes. I just find it online and copy and paste it into the metadata window. I have too many obscure albums to rely on iTunes.
The reason I ask is because I double backup my music and iTunes files. Normally, when I rip new albums I just add the new files and updated library files to me backup hard drives, by sorting by the modified date. But I'm now going back and editing all of my oder albums/songs metadata as I just described. In order to make sure this information gets backed up I'm simply backing up the entire iTunes Music folder, which takes all night cause it's around 500GBs. But I'd prefer to only add the modified files to the backup, which usually only takes a few moments.
When I sort by modified date the albums/songs I edited metadata for do not show up as modified that day. So, is it pointless to always backup the entire folder when all I have to do is back up what was modified? And if so, what are those files?
Also, is there a good app that will compare two hard drives and keep them in synch? So that I can basically do what I want to do automagically? Set one as the master and one as the backup, and ahve the app always synch the backup to the master. That would be nice!

Andrew Thompson2 wrote:
I edit the metadata for each album/song - add cover art, correct any album name or artists erros, make some notes to myself to help search/browse. Where does this data reside - with the song file or the library file or somewhere else? BTW I don't download the cover artwork from iTunes. I just find it online and copy and paste it into the metadata window. I have too many obscure albums to rely on iTunes.
If you're not downloading artwork from iTunes, all of the tags and artwork are stored with the individual song files. Some iTunes-specific data, like play count and rating, are stored in the iTunes Library database file.

Display Window Control IDs and other information

Similar Messages

Maybe you are looking for