Displaying columns in Crosstab report.
Hi all,
I have developed Matrix Report. Output is coming like below.
Current Vol OPM Cost
Category X1 x2 x3 x4 x1 x2 x3 x4
Product Market
AAA1 Japan 10 20 30 40 10 20 30 40
BBB1 Japan 10 20 30 40 10 20 30 40Current volume also displaying based on category. But, i need to display as Current vol one time only. instead of 4 (X1,x2,x3,x4). OPM cost should display as matrix based on category.
Please let me know , Is it possible to do it in Discoverer.
Thanks
Kavi
Hi,
Yes it is possible but you will need to have each category as a separate row then use a crosstab report to display the rows in a matrix.
To create the extra rows for each catogory you will need a row generator in your EUL. See this link http://learndiscoverer.blogspot.com/2008/10/row-generators.html for details.
You can then use decode to define the calculation that will display the OPM cost for the category on the row.
Rod West
Similar Messages
-
The number of display columns in the report reached the limit. Help!!!
Hello Everyone,
This might be dumb question. But why do get this error with a IR report? and what is the solution for this. Please help me with this.
Error
The number of display columns in the report reached the limit. Please click Select Columns under Actions menu to minimize the report display column list.
Oh.. And also i have a blob column.. if the format is not given, then the table is fine.. but happen to get this error only when the blob download format is given.
Thanks and regards
John
Edited by: JB on Mar 30, 2012 11:08 AMHi,
i have set up a small test case on apex.oracle.com and I receive the same error if I use download format.
I have a table
test_blob (id number, name varchar2(10), blobcont blob)
If I create IR like
select
id,
name,
blobcont
from test_bloband then I define download format I hit the error.
If you want this to work you have to change your query to
select
id,
name,
dbms_lob.getlength(blobcont) blobcont
from test_blobAnd then again define download format for blob on blobcont column.
Regards,
Aljaz -
The number of display columns in the report reached the limit" Interactive Report
I get the error message of "The number of display columns in the report reached the limit" when trying to display less than 100 (100 is limit) columns when an aggregate has been created. This does not happen when an aggregate has not been added to the IR report. It seems to happen because I have a control break on as well. When I turn off the control break it works but is not the result that we want. Interesting enough, if I filter the results down to 500 rows it works just fine. Does oracle treat aggregates as columns!? This is a really odd issue that I really need to clear up.
Oracle 11g
apex 4.1.0.33
Thanks in advance,
Shawn.Hi,
i have set up a small test case on apex.oracle.com and I receive the same error if I use download format.
I have a table
test_blob (id number, name varchar2(10), blobcont blob)
If I create IR like
select
id,
name,
blobcont
from test_bloband then I define download format I hit the error.
If you want this to work you have to change your query to
select
id,
name,
dbms_lob.getlength(blobcont) blobcont
from test_blobAnd then again define download format for blob on blobcont column.
Regards,
Aljaz -
Dynamic columns in crosstab report
Hello,
I'm using CR 2008.
I've created a dynamic crosstab report. The number of columns could be any, depending on the data.
I need to replace the original column headers with the formula, so the headers would look like this:
Set1 Set2 Set3... etc., where 1, 2, 3... etc. are the column indexes (or just sequential numbers).
Could you please recommend me a formula for it? I'm not sure how to insert these sequential numbers to the column headers.
Thank you.Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551 -
Conditionally displayed columns of interactive report not displayed
We have an interactive report in which few of the columns have been defined with conditions for display.
But on the interactive report page, when the conditions are satisfied these columns do not display in the report by default.
These columns are found in the 'Select Columns' -> 'do not display' pane. Everytime the report is run, these columns need to be selected using the select column.
Is there anyway to make the columns appear in the report by default, when conditions are true.Thanks Jari for your help.
For this issue, we finally came up with a work around.
we removed the conditions from all the columns then ran the application report page.
Clicked on Select Columns and moved the columns from the do not display pane to the right pane.
Ordered them as needed. Then saved the report as primary.
Then again went to the edit page-> interactive report and applied the conditions to the necessary columns.
and it worked.
When I went to the report these columns are displayed by default. -
Extra column in Crosstab report
Hi Experts,
We are designing a cross tab report (using CR 2008) and got stuck at one point. If we want to add an extra column in cross tab, what is the way to insert the same?
Currently our cross tab is designed using 3 elements: Country, Month and Sales. We would like to add an extra column u201Clast year salesu201D before Month data. This element is present in database.
Any help / suggestions would be appreciated.
Regards,
ChinmayRight click Cross tab - -> Cross tab expert
Drag field into columns and the position with up/down arrows
Ian -
Possible to change displayed columns of RME Report Generator
I created a Software Report from the RME Report Generator. The CSV file has the following default colums in the report:
Device Name
Updated At
System Description
Location
Contact
Serial Number
Vendor Type
SW Version
Management Type
Config Register Value
I would like to add a column called "IP Address" which would be the IP address of the device. This is so that whomever looks at the report has both the name and IP address of the device.
Is there a file I can edit to have RME add the attribute/credential to the report?
Thanks.No, the built-in reports are fixed, and cannot be changed. However, you could create an inventory custom report with the following ruleset, and get close to what you want.
System:Name:equals:All
AND:IP Address:IP Address:equals:All
AND:System:Description:equals:All
AND:System:Location:equals:All
AND:System:Contact:equals:All
AND:Chassis:Chassis Serial Number:equals:All
AND:Chassis:Chassis Vendor Type:equals:All
AND:Processor:SW Version:equals:All
AND:Processor:Config Register Value:=:All -
Displaying columns based on user parameter
Hello Experts,
My oracle apps version is R12.1.3
and database is 11g
and below is my Question?
How can we display columns in a report based on user parameter.
Suppose my report has 15 columns but some user dont need all this 15 columns, so before getting the output user wants to give parameter for that report and then report will give output for only those columns which user had given in parameter window.
I think i clear my point here. Any help could be very much appreciated.
Thanks,
AtulWhat if you have 15 parameters such as
Display onhand (Yes/no)
Display item description (yes /no)
etc.
And then in the report, have a trigger associated with each column (as well as heading) that returns false if the parameter is No.
Hope this helps,
Sandeep Gandhi -
Crstal Reports XI - Crosstab Report - Displaying Dates (Cashflow)
Hello
I was wondering if any one would be able to help me with an issue I'm having. I need to create a cashflow report at the moment I'm trying with a crosstab report (this may be the problem)!!
I need it to display in the following way. (you may not be able to see the layout), but basically months across the top ( as columns), opportunity description as rows, values then appear under dates.
Oct-11 Nov-11 Dec-11 Jan-12 ...............Sept-12
Opportunity Description 100.00
Opportunity Description 1 100.00
I have several formulas I have included the simpilest below, the problem I'm having is the year is not being taking into consideration and some of the values are display in the incorrect months.
eg. The report will run for a year, If my estimated date is Aug 2012 and I add 3 months to it, it should not display on my report (Nov-2012) but it wraps and appears in Nov-2011...
Case "One Off":
If (Month ({Sheet1_.Monthstart})=Month (DateAdd("m",3,{OPPORTUNITY.ESTIMATEDCLOSE}))) Then {@First_Year_Fees}
I think its because I'm not defining the date correctly and taking into account the year.
If anyone can solve this I would be very grateful or is there an alternative method other than using a crosstab...
Thannk you very much
SarahTry a date range parameter to select your data rather than a date in the middle of the year. If you are concerned that they not enter in exactly one year, you could test the date range with
not({?enddate}-{?startdate} = 365)
and give them a warning, you could even suppress everything except the warning that the date range must be one year.
Or use just a starting date parameter and use it as
date({field}) >= {?date} and date({field}) < {?date}+366 // adds 1 year
or just an end date. -
Adding a dummy column for text in crosstab report
I created a report using crosstab to show trended months per column & details per row. Now I'm trying to add additional columns to the crosstab report to display other pertinent info (not calculations, just text pulling from the database). I read from various threads in the forum that I can create dummy columns to accomodate this, but I don't know how to do so. Can someone please guide me in doing so? If creating dummy columns is not a solution, please advice on what's the best way to add text columns to a crosstab report. Any help is truly appreciated. Thank you.
Original report:
Emp Name Jan Feb Mar Apr May Total
Doe, John 20 17 30 28 33 128
Wish to accomplish:
Emp Name Emp# Dept# Yrs Employed Jan Feb Mar Apr May Total
Doe, John 12345 6010 8 20 17 30 28 33 128Hi Fione,
I don't have access to CR at the moment but this is how I can think of doing this:
1) Create a Subreport that points to the same table as the Main Report
2) The Subreport should return the same number of Employees and in the same order as the Main Report - you can do this by creating a group on the Emp field just like the 'Row' in the Crosstab
3) Create separate array variables - one each for Emp#, Dep# etc that accumulates values for each employee and inserts it against an index of the array
4) Suppress all sections inside this subreport and place this Subreport on the Report Header of the Main Report
5) Reduce the size of this subreport so that it isn't bigger than a dot and DO NOT suppress the section that holds this subreport
6) Insert Calculated Members in the Crosstab for each column you need
7) Use the array variable meant for the respective column. You just need to print the value at each index of the array based on the 'currentrowindex+1' function.
-Abhilash -
How to display subtotals in separate column in alv report?
hi,
I am displayed the subtotals for QUantity field BDMNG in Reuse_alv_grid_display in the same column.
but I want to display subtotal in separate column.
How to display subtotals in separate column in alv report?
thanks®ards.
samba.kHi
As far as i know you can't do this,the option you have is to create one more column (subtotal) and populate it by manual calculation at every subtotal (not alv subtotal but yours) .
Best Regards
Yossi -
How to display more than 60 columns in a report
I have a table defined as follows
id
column_name
column_value
data sample
id col_name column_value
1 col1 val1
1 col2 val2
1 col3 val3
2 col1 val1
2 col2 val2
2 col3 val3
now I want to display the data in a report as follows
id col1 col2 col3
1 val1 val2 val3
2 val1 val2 val3
I was able to generate output using pivots [http://technology.amis.nl/blog/1197/pivot-dynamic-data]
the problem is that I can have more that 60 columns retrieved in each row, the pivot solution will retrieve them correctly but I can't display more than 60 columns in apex reports, why this restriction in apex, any solutionHello:
In the Source section of the report definition choose 'Use Generic Column Names (parse query at runtime only)' and then specify a suitable value for 'Maximum number of generic report columns:'
Varad -
Display Columns from WBS and Activities in the same Report
Does anyone know how to display Columns from a WBS and an Activity together so that they can be output to Excel?
I need WBS Code, Actual Start, Actual Finish and Performance % Complete from the WBS and Activity Codes from Activities.
I can produce them in a report but this gives me all the activities in a heirarchical format which then necessitates deleting the activity lines in Excel
The Performance % complete which I want is available in Activities at the Summary Level but the Activity Codes are not at this level
I could put the Activity Codes in as Project Codes at the WBS level but this will require a lot of maintenance
Maybe someone knows an easy way to do this?
John
Edited by: user9088233 on Feb 3, 2010 11:50 PMuser9088233,
Your request interested me so I gave it the old college try. There are several ways to go about this task but here's one that is fairly quick and easy.
I carefully read your description of what you need from P6. I've built a test layout using the fields that you outlined. Here's what I came up with. This should bypass the issue of having to create a P6 export. My solution is to build a customized layout in P6 and copy that info and paste it into an Excel spreadsheet.+
Open P6
Open neccessary projects & open a new layout containing these columns:
....Project, WBS,Activity ID, Activity Name, Perf. %, & (any codes or user defined codes)
Group & Sort by: Project, WBS
....*Display Options* = "Show Group Totals" & "Show Summaries Only", Choose "OK"
....*Edit*, Select, All, Copy
Open Excel
....Paste Highlighted data into your new worksheet.
Hope this helps but it's usually hard to understand exactly what you need unless I can view your data,
Good Luck & let me know how it turns out,
p3_scheduler
Edited by: p3_scheduler on Feb 8, 2010 2:40 PM -
Display BLOB (image) column in (interactive) report
Hi,
I have a field called "picture" in my table "details" which is of type BLOB. i also have a field for "MIMETYPE" and "filename"
i additionally have a "name" and "description" columns which i need to display along with the picture as columns in a report (preferably interactive).
i have also modified the BLOB display format as per
http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/apex/r31/apex31nf/apex31blob.htm
what i am missing is the correct query. if possible, i would like to control the size of the picture rendered within the report like say 40*50.
I have also referred to the thread
APEX 3.1 Display BLOB Image
But i don't know how to place the
dbms_lob.getlength("BLOB_CONTENT") as "BLOB_CONTENT"
in my query.
The above also makes the report column as of type "number". is this expected?
Any help would be much appreciated.
Regards,
RamakrishnanYou haven't actually said what the problem is?
>
I have a field called "picture" in my table "details" which is of type BLOB. i also have a field for "MIMETYPE" and "filename"
i additionally have a "name" and "description" columns which i need to display along with the picture as columns in a report (preferably interactive).
i have also modified the BLOB display format as per
http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/apex/r31/apex31nf/apex31blob.htm
what i am missing is the correct query.
I have also referred to the thread
APEX 3.1 Display BLOB Image
But i don't know how to place the
dbms_lob.getlength("BLOB_CONTENT") as "BLOB_CONTENT"
>
Something like:
select
name
, description
, dbms_lob.getlength(picture) picture
from
details
if possible, i would like to control the size of the picture rendered within the report like say 40*50.For images close to this size it's easy to do this for declarative BLOB images in interactive reports using CSS. Add a style sheet with:
.apexir_WORKSHEET_DATA td[headers="PICTURE"] img {
display: block;
width: 40px;
border: 1px solid #999;
padding: 4px;
background: #f6f6f6;
}where the <tt>PICTURE</tt> value in the attribute selector is the table header ID of the image column. Setting only one dimension (in this case the width) scales the image with the correct aspect ratio. (The border, padding and background properties are just eye candy...)
However, scaling large images in the browser this way is a huge waste of bandwidth and produces poorer quality images than creating proper scaled down versions using image tools. For improved performance and image quality, and where you require image-specific scaling you can use the database ORDImage object to produce thumbnail and preview versions automatically, as described in this blog post. -
How to fix loop value of column in crosstab BI publisher report ?
Hi all,
I have a RTF template of crosstab report.I facing the problem: Some value of each column is loop for each row.
EX: I have data: row1,co1(1000), col2(0),row2,col1(2000),col2(500).Then value of col1 loop from row1 and row2. Please help me!It's urgent.
Incorrect result:
desc col1 col2
no am am
row1 1000 0
row2 1000 500
Correct result:
desc col1 col2
no am am
row1 1000 0
row2 2000 500Can you share the data and the version you are using ?
Tim
Maybe you are looking for
-
Delivery not created in cash sales
Dear Gurus, I am facing an error while processing a cash sales scenario.I am creating a sales order for cash sales and trying to save it.After saving system shows error as orders saved ,delivery not created.(message no V1261) I have checked all the c
-
I downloaded a game called Ultraviolet Dawn, paid for it, played for a while and one day it stopped working. Now every time I start it, the app freezes. I try to reinstall it by downloading the app frome app store again only to find out it is no long
-
Autual cost line items not displaying in cji3
in sap ps when i tried to see the autual cost line items, but it is not displaying in cji3 ? Can anyone provide me the solution.waiting for response?
-
From PHP to JSP for a search-responder.php
I have been asked to use the "search-as-you-type" solution offered up by Google at [http://code.google.com/p/search-as-you-type/|http://code.google.com/p/search-as-you-type/]. The documentation offered by Google is pretty much straight forward but of
-
Subsidized Palm Pre 2 and future web OS phones
I am currently a verizon cutomer using the motorola droid. My contract is almost up, and while the droid has held up well over the last 1.5 years I have been very interested in switching to a web OS device. The only reason I chose the droid over the