Displaying decimal value in the table!
Hi All,
Please help me for this.
I am calling a BAPI function into webdynpro But In R/3 side one "totalvalue" column value displayed as Decimal like 3.45 But the same BAPI I am using in webdynpro.It displays Only 3 only How can i display "3.45"
Please help me.
Here Iam calling BAPI function directly .
Thanks In advance
BHI.
Thanks for your immediate response.
Here I maapped the BAPI Funtion Directly .
There is no chance to see the this is Int or Decimal.
It is mapping to Directly BAPI function path.
In Structures showing Element name "total" and builtintype is "Decimal" and length=15 and decimals 2 .
Could you pls guide me how to display this Decimla structure values into webdynpro.
Pls help me.
Thnks
BHI
Similar Messages
-
How to display(binding) values in the table from more than one node?
Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina -
How to update values in the table control at Cat2 transaction,
Hi,
i am working on cat2 transaction, here
i am using the exit_saplcats_006 and updating values at catsdb table, but i want to display this values at the table control in the cat2 transaction.
can any one provide me solution for this same.
RegardsHi Suresh
this is actual requirement
in the CAT2.
1. Add a new column for WBS description and derive the value as per the FS
2. Retrieve project number and description and update in the column specified
3. When a service order is selected it should do the same for 2.
4. Finally repeat for the worklist view (which is the section above)
here i am able to display values at data entry area
for service order and network but not worklist area ?
updation is not coming, can u plz go throw it..
Thanks
Chinna -
How to display the values from the table in the screen
Hi,
I have created a screen where i will enter the values for the field treshold amount and desc and if i press update button .it will update the new values by overriting the existing values .
Now i have got requirement i need to create a button show which will display the existing value from the table. always there will be only one entry...in this table
Please can one give me idea...to do this
or sample code...thanks in advance
regards
paveeeeeeDefine a function code 'SHOW' for your button. In your PAI module, when you check for various sy-ucomms, check for 'SHOW' also.
Your code will be like this:
Case sy-ucomm.
when 'SHOW'.
perform show_details.
endcase.
In the perform, you can fetch the data from the table and put it in global variables. In the PBO, move the data from the global variables to the screen fields so that they get displayed on the screen.
Hope this helps. Reward points for useful answers.
Regards
Nithya -
OO ALV displaying without Values despite Internal table contains
My below OO ALV displaying without Values despite Internal table contains the values ...
Help please ...
REPORT zsd_concession1 NO STANDARD PAGE HEADING
LINE-SIZE 285
LINE-COUNT 64
MESSAGE-ID zz.
Program Description ******************************
This report is to Calculate consession against Quotations
complying standards for enhanced Performance, Readability &
Maintenance.
Change Log *********************************
Remedy # / Who When Why / What
Transport #
CLASS lcl_event_handler DEFINITION DEFERRED.
*& Data Definitions .
DATA: BEGIN OF vbap_wa,
vbeln TYPE vbak-vbeln, "Quotation#
erdat TYPE vbak-erdat, "Quot date
knumv TYPE vbak-knumv, "Cond Rec#
posnr TYPE vbap-posnr, "Line Item
matnr TYPE vbap-matnr, "Mat#
zansicat TYPE zmarall-zansicat, "AnsiCat#
zansigrd TYPE zmarall-zansigrd, "Grade
zcurrvaltnarea TYPE zco002-zcurrvaltnarea,"Val Area
zcurrcstusd TYPE zco002-zcurrcstusd, "Cost$
zzbrndnm TYPE mara-zzbrndnm, "Brand
zqedscgrp TYPE zglbprc-zqedscgrp, "QE Disc Grp
mstav TYPE mara-mstav, "Status
kwmeng TYPE vbap-kwmeng, "Qty
lprc TYPE konv-kbetr, "List Price ZBP1
sprc TYPE konv-kbetr, "Std Pric ZNAA,ZNAX
netpr TYPE vbap-netpr, "Quot price
mrgn TYPE konv-kbetr, "margin%
END OF vbap_wa,
BEGIN OF konv_wa,
knumv TYPE konv-knumv, "Cond#
kposn TYPE konv-kposn, "Cond Item#
kappl TYPE konv-kappl, "Applic
kschl TYPE konv-kschl, "Cond Typ
kbetr TYPE konv-kbetr, "Price ZBP1,ZNAA,ZNAX
END OF konv_wa,
BEGIN OF vbpa_wa,
vbeln TYPE vbpa-vbeln, "Quot#
posnr TYPE vbpa-posnr, "Item#
parvw TYPE vbpa-parvw, "Prt Fn
kunnr TYPE vbpa-kunnr, "Cust#
END OF vbpa_wa,
BEGIN OF result_wa,
posnr TYPE vbap-posnr, "Line Item
matnr TYPE vbap-matnr, "Mat#
zansicat TYPE zmarall-zansicat, "AnsiCat#
zansigrd TYPE zmarall-zansigrd, "Grade
zcurrvaltnarea TYPE zco002-zcurrvaltnarea,"Val Area
zcurrcstusd TYPE zco002-zcurrcstusd, "Cost$
zzbrndnm TYPE mara-zzbrndnm, "Brand
zqedscgrp TYPE zglbprc-zqedscgrp, "QE Disc Grp
mstav TYPE mara-mstav, "Status
kwmeng TYPE vbap-kwmeng, "Qty
lprc TYPE konv-kbetr, "List Price ZBP1
sprc TYPE konv-kbetr, "Std Pric ZNAA,ZNAX
netpr TYPE vbap-netpr, "Quot price
mrgn TYPE konv-kbetr, "margin%
END OF result_wa.
DATA: ikonv LIKE STANDARD TABLE OF konv_wa,
ivbap LIKE STANDARD TABLE OF vbap_wa,
ivbpa LIKE STANDARD TABLE OF vbpa_wa,
iresult LIKE STANDARD TABLE OF result_wa.
*Work storage
DATA: BEGIN OF ws,
vbeln TYPE vbak-vbeln,
ok_code TYPE sy-ucomm,
alv_save TYPE c, "ALV save
alv_variant TYPE disvariant, "ALV Variant
alv_sort TYPE lvc_t_sort, "Sort table
END OF ws.
*Data declarations for ALV Main list
DATA : ty_lay1 TYPE lvc_s_layo,
it_fieldcat TYPE lvc_t_fcat ,
ty_fieldcat TYPE lvc_s_fcat ,
l_smenu TYPE REF TO cl_ctmenu,
c_alv1 TYPE REF TO cl_gui_alv_grid,
c_cont1 TYPE REF TO cl_gui_custom_container,
e_dclick TYPE REF TO lcl_event_handler.
*Data declarations for ALV Interactive list
DATA : ty_lay2 TYPE lvc_s_layo,
it_fcat TYPE lvc_t_fcat ,
ty_fcat TYPE lvc_s_fcat ,
c_alv2 TYPE REF TO cl_gui_alv_grid,
c_cont2 TYPE REF TO cl_gui_custom_container.
*Field-Symbols
FIELD-SYMBOLS:
<konv> LIKE konv_wa,
<vbap> LIKE vbap_wa.
*Constants
CONSTANTS:
c_end_row TYPE i VALUE 65000.
*CLASS lcl_event_receiver DEFINITION
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
METHODS:
handle_double_click
FOR EVENT double_click OF cl_gui_alv_grid IMPORTING e_row.
ENDCLASS. "lcl_event_handler DEFINITION
*CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_double_click.
DATA: sec_wa LIKE LINE OF iresult.
*Reading the selected data into a variable
READ TABLE iresult INDEX e_row-index INTO sec_wa.
*Select the field details of the selected table
SELECT * FROM dd03l INTO CORRESPONDING FIELDS OF TABLE it_dd03l
WHERE tabname EQ ls_dd02l-tabname.
*Calling the ALV containing the field values
CALL SCREEN 101.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_event_handler IMPLEMENTATION
*& SELECTION-SCREEN.
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001.
SELECT-OPTIONS:
s_vbeln FOR ws-vbeln DEFAULT '2002354788' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK a.
INITIALIZATION.
PERFORM setup_screen_defaults.
START-OF-SELECTION.
PERFORM gather_report_data.
END-OF-SELECTION.
PERFORM create_output.
*& Form initialization
FORM setup_screen_defaults.
CLEAR: ws, konv_wa, vbap_wa, vbpa_wa.
REFRESH: ivbpa, ikonv, ivbap, iresult.
ENDFORM. " setup_screen_defaults
*& Form gather_report_data
FORM gather_report_data.
SELECT vbeln posnr parvw kunnr
INTO TABLE ivbpa
FROM vbpa
WHERE vbeln IN s_vbeln
AND ( parvw = 'SP' OR "SoldTO
parvw = 'WE' OR "ShipTo
parvw = 'ZT' ). "Top Parent
SELECT vkvbeln vkerdat vkknumv vpposnr vp~matnr
z1zansicat z1zansigrd z2~zcurrvaltnarea
z2zcurrcstusd m1zzbrndnm zg~zqedscgrp
m1mstav vpkwmeng vp~netpr
INTO CORRESPONDING FIELDS OF TABLE ivbap
FROM vbak AS vk
INNER JOIN vbap AS vp
ON vpvbeln = vkvbeln
INNER JOIN zmarall AS z1
ON z1matnr = vpmatnr
INNER JOIN zco002 AS z2
ON z2matnr = vpmatnr
INNER JOIN zglbprc AS zg
ON zgmatnr = vpmatnr
INNER JOIN mara AS m1
ON m1matnr = vpmatnr
WHERE vk~vbeln IN s_vbeln
AND vk~auart = 'AG'."AG = Quot
SORT ivbap BY posnr matnr.
SELECT kvknumv kvkposn kvkappl kvkschl kv~kbetr
INTO TABLE ikonv
FROM konv AS kv
FOR ALL ENTRIES IN ivbap
WHERE kv~knumv = ivbap-knumv
AND kv~kposn = ivbap-posnr
AND kv~kappl EQ 'V'
AND ( kv~kschl EQ 'ZBP1'
OR kv~kschl EQ 'ZNAX'
OR kv~kschl EQ 'ZNAA' ).
SORT ikonv BY knumv kposn.
LOOP AT ivbap ASSIGNING <vbap>.
CLEAR konv_wa.
READ TABLE ikonv INTO konv_wa WITH KEY
knumv = <vbap>-knumv
kposn = <vbap>-posnr
kschl = 'ZBP1'
BINARY SEARCH.
IF sy-subrc EQ 0.
<vbap>-lprc = konv_wa-kbetr.
ENDIF.
READ TABLE ikonv INTO konv_wa WITH KEY
knumv = <vbap>-knumv
kposn = <vbap>-posnr
kschl = 'ZNAX'
BINARY SEARCH.
IF sy-subrc EQ 0.
<vbap>-sprc = konv_wa-kbetr.
ENDIF.
READ TABLE ikonv INTO konv_wa WITH KEY
knumv = <vbap>-knumv
kposn = <vbap>-posnr
kschl = 'ZNAA'
BINARY SEARCH.
IF sy-subrc EQ 0.
<vbap>-sprc = konv_wa-kbetr.
ENDIF.
ENDLOOP.
SORT ivbap BY posnr matnr.
LOOP AT ivbap INTO vbap_wa.
MOVE-CORRESPONDING vbap_wa TO result_wa.
APPEND result_wa TO iresult.
CLEAR: vbap_wa, result_wa.
ENDLOOP.
ENDFORM. " gather_report_data
*& Form create_output
FORM create_output.
CALL SCREEN 100.
FREE: iresult.
ENDFORM. " create_output
*& Module PBO_0100 OUTPUT
text
MODULE pbo_0100 OUTPUT.
SET PF-STATUS '0100'.
SET TITLEBAR '0100'.
IF c_cont1 IS INITIAL.
*Creating object of container
CREATE OBJECT c_cont1
EXPORTING
container_name = 'CCONT1'.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Creating object of alv
CREATE OBJECT c_alv1
EXPORTING
i_parent = c_cont1.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Alv layout
PERFORM alv_100_layout.
PERFORM save_alv_layout.
*Alv field catalogue
PERFORM alv_100_fieldcat.
*Displaying the ALV grid
CALL METHOD c_alv1->set_table_for_first_display
EXPORTING
is_layout = ty_lay1
i_save = ws-alv_save
is_variant = ws-alv_variant
CHANGING
it_outtab = iresult[]
it_sort = ws-alv_sort
it_fieldcatalog = it_fieldcat[].
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Create object of the event class
*and setting handler for double click
CREATE OBJECT e_dclick.
SET HANDLER e_dclick->handle_double_click FOR c_alv1.
ENDIF.
ENDMODULE. " PBO_0100 OUTPUT
*& Module PAI_0100 INPUT
text
MODULE pai_0100 INPUT.
ws-ok_code = sy-ucomm.
CASE ws-ok_code.
WHEN 'BACK'.
CALL SELECTION-SCREEN 1000.
CLEAR ws-ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
CLEAR ws-ok_code.
EXIT.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
CLEAR ws-ok_code.
EXIT.
WHEN OTHERS.
ENDCASE.
ENDMODULE. " PAI_0100 INPUT
*& Form alv_100_layout
text
--> p1 text
<-- p2 text
FORM alv_100_layout.
ty_lay1-numc_total = 'X'. " Numc total line
ty_lay1-cwidth_opt = 'X'. " Optimal column width
ty_lay1-detailinit = 'X'. " Show values that are initial in
ty_lay1-sel_mode = 'A'. " Column selection mode
ty_lay1-no_merging = 'X'. " No merging while sorting columns
ty_lay1-keyhot = 'X'.
ty_lay1-grid_title = 'SD Concessions'.
ty_lay1-zebra = 'X'.
ty_lay1-no_toolbar = ' '.
ENDFORM. " alv_100_layout
*& Form alv_100_fieldcat
text
--> p1 text
<-- p2 text
FORM alv_100_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 1.
ty_fieldcat-fieldname = 'posnr'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Item#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 2.
ty_fieldcat-fieldname = 'matnr'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Mat#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 3.
ty_fieldcat-fieldname = 'zansicat'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'AnsiCat#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 4.
ty_fieldcat-fieldname = 'zansigrd'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Grade'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 5.
ty_fieldcat-fieldname = 'zcurrvaltnarea'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Val Area'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 6.
ty_fieldcat-fieldname = 'zcurrcstusd'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Cost $'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 7.
ty_fieldcat-fieldname = 'zzbrndnm'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Brand'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 8.
ty_fieldcat-fieldname = 'zqedscgrp'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'QE'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 9.
ty_fieldcat-fieldname = 'mstav'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Status'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 9.
ty_fieldcat-fieldname = 'kwmeng'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Qty'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 10.
ty_fieldcat-fieldname = 'lprc'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'List Price'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 11.
ty_fieldcat-fieldname = 'sprc'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Discount'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 12.
ty_fieldcat-fieldname = 'netpr'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Quot Price'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 13.
ty_fieldcat-fieldname = 'mrgn'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Margin%'.
ty_fieldcat-outputlen = 15.
APPEND ty_fieldcat TO it_fieldcat.
ENDFORM. " alv_100_fieldcat
*& Module PBO_0101 OUTPUT
text
MODULE pbo_0101 OUTPUT.
*Check if the Custom container exists.
IF c_cont2 IS INITIAL.
*Creating container object
CREATE OBJECT c_cont2
EXPORTING
container_name = 'CCONT2'.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*creating ALV grid for interactive list
CREATE OBJECT c_alv2
EXPORTING
i_parent = c_cont2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*ALV layout
PERFORM alv_101_layout.
*ALV fieldcatalogue
PERFORM alv_101_fieldcat.
*Sorting the output by field position
SORT iresult BY posnr.
*ALV for display field details
CALL METHOD c_alv2->set_table_for_first_display
EXPORTING
is_layout = ty_lay2
CHANGING
it_outtab = iresult[]
it_fieldcatalog = it_fieldcat.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDMODULE. " PBO_0101 OUTPUT
*& Module PAI_0101 INPUT
text
MODULE pai_0101 INPUT.
ENDMODULE. " PAI_0101 INPUT
*& Form alv_101_layout
text
--> p1 text
<-- p2 text
FORM alv_101_layout.
ty_lay2-grid_title = 'Line Details'.
ty_lay2-zebra = 'X'.
ty_lay2-no_toolbar = 'X'.
ENDFORM. " alv_101_layout
*& Form alv_101_fieldcat
text
--> p1 text
<-- p2 text
FORM alv_101_fieldcat.
REFRESH it_fieldcat.
REFRESH it_fcat.
CLEAR ty_fcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 1.
ty_fieldcat-fieldname = 'posnr'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Item#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 2.
ty_fieldcat-fieldname = 'matnr'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Mat#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 3.
ty_fieldcat-fieldname = 'zansicat'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'AnsiCat#'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 4.
ty_fieldcat-fieldname = 'zansigrd'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Grade'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
CLEAR ty_fieldcat.
ty_fieldcat-row_pos = 1.
ty_fieldcat-col_pos = 5.
ty_fieldcat-fieldname = 'zcurrvaltnarea'.
ty_fieldcat-tabname = 'iresult'.
ty_fieldcat-coltext = 'Val Area'.
ty_fieldcat-outputlen = 10.
APPEND ty_fieldcat TO it_fieldcat.
ENDFORM. " alv_101_fieldcat
*& Form save_alv_layout
text
--> p1 text
<-- p2 text
form save_alv_layout.
ws-alv_save = 'A'.
ws-alv_variant-report = sy-repid.
endform. " save_alv_layoutHello
Creating fieldcatalogs manually is one of the major error sources in ALV programming.
There is hardly any reason why NOT to use the standard-fm LVC_FIELDCATALOG_MERGE in order to create a proper fieldcatalog.
If you need some modification of the standard fieldcatalog (e.g. renaming of columns, etc.) just do your post-processing after calling the fm.
Regards
Uwe -
Display decimal values in report
Hi all,
I have one question concerning the display of decimal values smaller than '1' in a report.
In an SQL query some calculations are done and the result is displayed in a report.
The problem is, that if the value of the result is smaller than '1' it shows for example ,8 instead of 0,8
Does anybody know how to display decimal values normally?
kind Regards and thanks!!
PatrickHi SWED!
1.) Click at the name of your report region (in application builder) to edit it
2.) Select the "report attributes" tab
3.) Click at the column you want to format
4.) Look for the "Column Formatting" region
5.) Select the proper format from the "Number / Date Format" list or enter your own format like "0.0"
I hope that will help you along.
yours sincerely
Florian W. -
How to pass line item values in the table paramer of FM
Hi all,
When i will give the import of the FM as VBELN"sales order number.
I want to display all the line items for "PO Quantity in the out put of the FM.
For this i thnk i have to pass the line item values in the table parameter of the FM.
Can any body please tell me how to pass the values for the line items in the table parameter fo teh FM.
Please give a example.
ThanksSub pLoopThroughPivotFields()
Dim oItem As Excel.PivotItem
Dim oField As Excel.PivotField
Set oField = ThisWorkbook.Worksheets("Sheet1").PivotTables("Pivot Table name").PivotFields("field name")
For Each oItem In oField.PivotItems
oField.CurrentPage = oItem.Name
'Put your copy code here
DoEvents
Next oItem
End Sub
Felipe Costa Gualberto - http://www.ambienteoffice.com.br -
Update the values in the table on select of a particular row
hi
I want to update the values in the table on selecting the particular row.
im able to select the particular row using Leadselect.
can any one help me in updating the values in the table?
regards
rajihi,
values are coming from my database ( SQLServer.)
on click of the button i am able to display the values from the database.
My problem is on selection of any row , i should be able to edit/update the values in the table .
regards
raji -
Old value in the table SETLEAF
Dear All,
Normally we take back up on every weekend. Due to some wrong transport request in production in last weekend, all the value in the table - SETLEAF has been overwriten. Is there any way in which we can read the value entry in the table -SETLEAF from the back up system befor the last week end ?
Please help immideate basis.
Regards,
sp sahuHello,
I think you will have to build another database to read the value from specific table.
Restore system to another server and check the table valaues.
Good Luck,
Atil -
Exit in DP90 and how to get value in the table
Hi all,
My requirement is when execute DP90(create billing request), the amount in the table must be validated when I click the "Billing Request" button.
Please tell me the user_exit, BADI or any other enhancement which can I use to validate the amount in that transaction.
And how to get the amount(amount to be Billed, Amount rejected) value in the table after that??
ThanxHi Teja,
Check the BADI (SE18) - BADI_SD_DPBP - Extensions in SD for DP90 with Billing Plan -
How to find the value in the table in database ?
Hi, Could you please advise me, How to findout the data-value in the table in database ?
what do you mean by value ?
--Girish -
Date range to be displayed & Displaying multiple values on the report
Hi,
I have date range parameters, but I also need it to be displayed it on the report. Is there any way I can display it. E.G If a parameter is created one can drag and drop it on the report if it needs to be displayed on the report, I tried to do the same for the date range parameter but it does not work.
Also If a parameter is created by selecting the option 'Allow Multiple Values', and if you drag and drop it on the report only the first value is displayed and the rest does not show. Has anyone tried this before and been successful in displaying multiple values in the report.
Thanks in advance.Hi,
A multi-value parameter is actually treated as an array in Crystal Reports.
To display the values selected in the parameter, create a formula from the Field Explorer and type this code:
Join({?ParameterName},",");
Place this formula on the header or the footer sections of the report.
Regarding the date range issue, please follow Sastry's advice and it should work fine.
Make sure you're using the parameter in the Minimum and Maximum functions. For eg: If I was to create a date range parameter called OrderDate, my formula to show the start date would look like this:
Minimum({?OrderDate})
-Abhilash -
Any std funtion(s) for Zero-padded, 2 decimal value, without the deci point
Hi,
We want Zero-padded, two decimal value, without the decimal point. For example if it is 14.31, we need 001431.
I have done "multiply" with 100 and "formatNumber" as '000000'
SFIeld --> multiply * 100 --> formatNumber (000000) --> TField
It works good for values with decimal like above 14.31, does it work for everything else too? I mean for 12 it is populating as 001200. Is this best approach? Is there any other std funtions or UDF sample available?
Regards,
N@v!n>
N@v!n Kumar wrote:
> Hi,
>
> We want Zero-padded, two decimal value, without the decimal point. For example if it is 14.31, we need 001431.
> I have done "multiply" with 100 and "formatNumber" as '000000'
>
> SFIeld --> multiply * 100 --> formatNumber (000000) --> TField
>
> It works good for values with decimal like above 14.31, does it work for everything else too? I mean for 12 it is populating as 001200. Is this best approach? Is there any other std funtions or UDF sample available?
>
> Regards,
> N@v!n
public void convert_number(String[] FieldValue,ResultList result,Container container){
FieldValue = FieldValue * 100;
result.addValue(FieldValue); -
Find second Biggest and second smallest values in the table
Hi guys
I am new to oracle - sql and pl/sql
I need u r help
My question is i have a table with columns s.no, emp name, salary etc.,
how can i get the second largest and smallest value in the table (based on salary)
Any one pls give the queries (pls the query is used in oracle 8i)
Regards
Marimuthu.NYou only need to use max and min. Once you have it, select the max lower than max and the min biggest than min.
-
How to Maintain Values in the Table control?
Hi,
I'm Saikumar.
I've done a table control program.
When I click SAVE or ENTER Button, the values are getting saved into the database(This is working alright)......but when I click those buttons, The values entered in the table control are getting cleared.
What should I do in order to have those values in the table control itself when I click SAVE/ENTER? (I need to create multiple records at a time)
What I've done is:
IF sy-ucomm = 'SAVE' OR sy-ucomm = 'ENTR'.
INSERT into <database table> values wa_matgl.
MODIFY it_matgl from wa_matgl INDEX tc1-current_line. "tc1 is the table control name.
Refresh it_matgl.
endif.
I tried many ways but the vales are getting cleared in the table control? (I need to create multiple records at a time).
Please suggest a way to overcome it.
Thanks in advance,
saikumarHi ...
Just to add...
were there any values in the internal table it_matgl initially in the PBO screen to be shown to the users ?
<u>if the answer is no...then......</u>
i came across the same coding in DEMO_DYNPRO_TABCONT_LOOP_AT.....
here also in PAI..when we press enter..the values are not retained...
MODIFY it_matgl from wa_matgl INDEX tc1-current_line. "tc1 is the table control name.
<b>because i believe the modify statement is not working.coz the it_matgl is empty..pls check if sy-subrc = 0....after the modify statement....if it is not...then we need to insert the data into the it_matgl using an append statement</b>
for this it_matgl needs to be with header line...
Pls explore the following....
data : it_matgl type table of XXXX with header line.
in the section
IF sy-ucomm = 'SAVE' OR sy-ucomm = 'ENTR'.
INSERT into <database table> values wa_matgl.
MODIFY it_matgl from wa_matgl INDEX tc1-current_line. "tc1 is the table control name.
<i>if sy-subrc <> 0.
move corresponding wa_matgl to it_matgl.
append it_matgl.
clear it_matgl.
endif.
endif.</i>
Pls check and revert
Regards
Byju
Maybe you are looking for
-
Song will not show up on album in Ipod
I have an Ipod classic. In itunes, the songs on an album all show up there like they are supposed to. But on the ipod two songs are not there and they don't play when I play that album. I have had this problem before and changed the sort album, so
-
Want to Install a Dictionary in Nokia 6120
I formatted the memory card and lost all the installation of Unidic, builtin with Nokia 6120 Classic phone, can i get it from anyone or anywher, please help or is there any freeware version of dictionary
-
Aaargh! So frustrating, another "My Ipod won't start" problem.
Hi there, My 60gig video Ipod won't start. Yes, I've searched through other posts, the support pages etc to find a solution but to no avail. I followed the 5 Rs (except the one that deletes all files), tried different usb ports, plugged the ipod stra
-
Restore after soft reset not working
I'm hating my 5800 more and more by the day. I just did a soft reset in order to overcome the 'voice system error'. Then I did a restore of all the contacts, calender etc. What did it restore? NOTHING! Now what am I supposed to do?! Thanks again noki
-
Accéder au DataSocket Server via un programme en C
Bonjour à tous, Après de longues recherches je viens sur ce forum pour essayer de trouver chaussure à mon pied. Contexte : Dans le cadre d'un échange de données entre Labview et ControlBuild (Dassault), je chercher à utiliser le "DataSocket Server" i