Displaying dynamic values in excel download

Hi,
We have a requirement in which, a document id will be generated automactically via a JS code. This value needs to be shown in every report, when I download the report, the document ID should sit in the Title field of excel Header.
Is there any way to achieve this? If not what are the possible alternatives?
We are using obiee - 10g and paint rpd for this
Please let me know if someone has a solution.
thanks,
Vinutha

Hi,
Javascript code will be on the narrative view of the report. The Javascript will generated a document Id, which has to go into every reportdownloaded.
It will be something like this ...
<script>
function vtest()
var docid=1234;
document.write(docid);
return (docid);
</script>
thanks for the response,
Vinu

Similar Messages

Listbox displaying dynamic values in table control

Hi Experts,
The requirement that I have is that there are two columns in an internal table out of which second one is a listbox.
There is a need of displaying dynamic values in a row in a listbox according to value entered in first column of the same row, not affecting the listbox values in other rows.
I am using VRM_SET_VALUES for populating listbox, but it results in populating the listbox in all other rows also.
Please help.
Thanks,
Garima

Hi Thanks for the link..
But my problem is something else.
I want the same listbox of a column in a table control to show me different values in different rows on the basis of value in another column .
Regards,
Garima

How to display dynamic values in poplist at row level in advanced table

I want to display dynamic values in poplist at row level based on a row value in advanced table, with lov i can achieve it, is there any way to achieve this in poplist
Thanks
Bbau

Babu,
You have been long enough in forum and still come out with these one liners. Problem statement is not clear.
--Shiv

Problem in displaying dynamic values in dropdown list for each row

I want to display dynamic values in a drop down list for each row, and these values depends on the column value in each row(ptaid), based on each ptaid i need to fetch values for drop down list. so how can i achieve this..
Thanks
Babu

Babu,
This has been discussed in many old threads, try to find them. Also u can refer to article "Dependent Dynamic message choicelists ", at my blog
http://www.mukx.blogspot.com/
--Mukul

How to handle blank time value in excel download in ALV. Please help

Hi Experts,
   I have a ABAP webdynpro report which contains a ALV grid output. The ALV table has a time field (create_time of type tims).
   The problem is when the create_time value is initial (00:00:00 by default) it displays 00:00:00 in the ALV.
   When I export the contents to excel then there it shows the same value as 12:00:00 AM.
   How can I avoid this programmatically? Actually when time is initial then I want to display as blank instead of 00:00:00.
   For this if I change the data type of this field to CHAR08 then it displays the value as 0 (if initial) and 140523 (if time has some value or its not initial) instead if 14:05:23.
   I don't know if there is any better way to handle this.
Please help.
Thanks & Regards
Gopal

My suggestion is that you make the context attribute a type string. Then when you populate the data into the internal table that is bound to the context you perform a write statement on the date field. Here is some psydo-code.
if <ls_data>-time is initial.
clear <ls_output>-time.
else.
write <ls_data>-time to <ls_output>-time.
endif.
This way when the time is inital you can display nothing instead of the 00:00:00. This should also keep Excel from knowing that this column is a time field. To Excel it will just be a string and it should display whatever text you placed into the field.
Of course this means that filtering and sorting on this field won't work right. Those operations will be befored without knowledge this is actually a time field.

Time character has changed values during excel download.

Dear friends,
We are using BI7.00. In one of our report, we use Enterprise portal for reporting, we have the time character in a seperate field. When the output of this report is exported to excel, the value which is getting populated to excel is getting changed.
For example :- the report is PM report which has malfunction start time in the report as a column, if the value in the report output is 04:20 , the value in excel is 09:50.
How this is possilble.
Prior to dowload, when we click the export to excel icon in EP , the message "Problems came up in the following areas during load" - Cell value -> this message is popped up and if you overcome this message, we have difference in values.
I have searched in this forum and was not able to find any suitable solution.
Experts help expected.
Regards,
M.Magesh

Experts help on this?
Regards,
M.M

Unable to display double values in Excel sheet using JExcel API

Hi
I am writing code to generate report in the form of Excel Sheet using JExcel API.
Everything is going fine but whenever I want to put some double values in a cell it is only showing 2 decimal places. My problem is "I want to show upto five decimal places".
Any kind of reply might help me lot.
Thank U.

If you enable the submit zero option, it still happens? This is a new feature on the display tabl
#NumericZero Enhancements
To display a numeric zero in place of an error message, you can enter #NumericZero in any of the three Replacement text fields. When you use the #NumericZero option:
· Excel formatting for the cell is retained.
· All calculations with dependency on the cell will compute correctly and will take the value of this cell as zero.
· This numeric zero is for display only. When you submit, the zero value is NOT submitted back to the data source.
You cannot set display strings for cells that contain an invalid member or dimension name (metadata error). Metadata errors produce standard descriptive error messages.
Errors are prioritized in the following order from highest to lowest. The error message for a higher-priority error takes precedence over that for a lower-priority error.
1. (Highest) Metadata errors
2. #No access
3. #Invalid/Meaningless
4. #No data\Missing

Merge dimensions from universe and Excel file to display a value from Excel

I have a report with two sections similar to the following: customer, and a concatenation of customer-equipment. The customer and equipment are displayed as a header on each page, not as part of a table. Each page of the report has data for a single customer-equipment combination, but each customer can have several pages if that customer has several equipments. The data for customers and equipments comes from a universe, but certain combinations of customer-equipment need to display a label that is found in an Excel spreadsheet that also contains customer and equipment information. The label will be displayed in a free-standing cell, not in a table.
I created a concatenation of customer-equipment in the universe and in the spreadsheet to merge those dimensions. How can I retrieve the appropriate label from the spreadsheet? I want to have a free-standing cell that displays something to this effect: SELECT label FROM spreadsheet WHERE customer_equipment_combination_on_this_page = customer_equipment_combination_in_the_spreadsheet.
Thanks.
Pedro

Hi Simone,
Thanks for the tip. I'm using BOXI 3.1. The spreadsheet looks like this:
Where the Concat column contains the formula "=UPPER(TRIM(A3)&TRIM(B3)&TRIM(C3))". The report looks like this:
The vertical table contains data from the universe. The universe also contains Customer, Equipment1, and Equipment2. And the report is sectioned, so each Customer/Equipment1/Equipment2 combination should be on its own page.
I imported the Excel data into Access and created a new universe to connect to that Access database, and then the labels display correctly. But for some reason it won't work if it is merging with an Excel document instead of a universe. The "Cust1 (Equip1/Equip5)" line used to be a free-standing cell on which the report was sectioned, but I replaced it with moved it a three row table for the customer, L1, and L2.
Any suggestions? Thanks.

Displaying dynamic values in the list

hi
I have a list of usernames in the table and I want to display it on the list (not selection list)...when I click any usernames, the corresponding user details are to be displayed on the items..can anyone say how to display the usernames in the list by using the query? Is it possible to display the dynamic items(fetching from table) in the list? please help me...
regards
fazila

Babu,
This has been discussed in many old threads, try to find them. Also u can refer to article "Dependent Dynamic message choicelists ", at my blog
http://www.mukx.blogspot.com/
--Mukul

Display of leading zeroes when downloaded from ALV to excel

Hi All,
I have a problem in ALV grid display.
There is a specific field which has value starting from '001' to '999'. This is a char(3) type of variable.
The problem is that the display shows the value as '001' which is correct. but when the same file is dwnloaded to excel using standard SAP functionality, the value of the field gets changed to '1' instead of '001'.
Is there any option by which this can be controlled. Please let me know, its urgent!!
thanks

hi Ankur,
the Excel download is done by Z program? IF yes you have to do:
SET PROPERTY OF go_cell 'NumberFormat' = '@'.
this will set the Excel cell to Text type and leading zeros won't be lost.
ec

How to add a column to a list created with the Dynamic List Wizard to display the values of the fiel

Hi,
ADDT, Vista, WAMP5.0
We have 2 tables: clients_cli (id_cli, name_cli, tel_cli, and several more fields) and cases_cas (id_cas, idcli_cas, court_cas, and a lot of other fields).
Clients may have many cases, so table cases_cas have a foreign key named idcli_cas, just to determine which case belongs to which client.
We designed the lists of the two tables with the Dynamic List Wizard and the corresponding forms with Dynamic Form Wizard.
These two forms are linked with the Convert Dynamic List and Form Wizards, which added a button to clients list named "add case".
We add a client and then the system returns to the clients list displaying all clients, we look for the new client just added and then press "add case", which opens the Dynamic Form for cases, enter all case details and everything processes ok.
However, when we view the cases list it display all the details of the case, including the column and values for the foreign key idcli_cas. As you can image, it is quite difficult for a human to remember the clients ids.
So, in the cases list we added a another column, named it Name, to display the names of the clients along with cases details. We also created another recordset rsCli, selected the clients_cli table, displaying all columns, set filter id_cli = Form Variable = idcli_cas then press the Test button and everything displays perfect. Press ok.
Then, we position the cursor inside the corresponding cell of the new Name column, go to Bindings, click on name_cli and then click on insert. The dynamic field is inserted into the table cell as expected, Save the page, and test in browser.
The browser call the cases list but fails to display the values of the Name column. The Name column is simply empty.
This issue creates a huge problem that makes our application too difficult to use.
What are we doing wrong?
Please help.
Charles

1.     Start transaction PM01, Create Infotype, by entering the transaction code.
You access the Create Infotype screen.
2.     Choose List Screen.
3.     In the Infotype no. field, enter the four-digit number of the infotype you want to create.
When you specify the infotype number, please remember to enter any leading zeros.
4.     In the Screen Number field, enter the screen number of the list screen you want to enhance.
5.     Choose Create.
The Dictionary: Initial screen appears:
6.     Create the list screen structure.
7.     Choose Activate.
8.     Return to the Enhance List Screen in the Enhance Infotypes transaction (PM01).
9.     Choose Create All.
The additional fields are displayed on the list screen, however, they contain no data.
The fields can be filled in the FORM routine FILL-LISTSTRUCT in the generated program ZPnnnn00. The FORM routine is called for each data record in the list.
Structure ZPLIS is identified when it is generated with a TABLES statement in the program ZPnnnn00.
The fields can be filled from the Pnnnn structure or by reading text tables.

In MEK3 Transaction How to Download the Display Customs % Values

Hi Friends, Please Guide me on this Issue
Once User enters MEK3 Transaction and he follows below Steps
Enters the Condition Type
Clicks on -> Key Combination Button
Checks the Radio Button -> Purch Org / Plant/ Vendor and Continue
After Providing Inputs for
Purch. Organization, Plant, Valid on Date User executes the report
Then the data is displayed in Table Control
Here the User needs to download the data which is displayed in the Table Control
By Navigating through SYSTEM -> LIST -> SAVE -> LOCAL FILE
Here LOCAL FILE is not in enable mode
So how can we make that LOCAL FILE to enable mode and achieve the Download functionality
Thanks & Regards
Ganesh
Edited by: ganesh yarramsetty on Mar 9, 2011 1:41 PM
Edited by: ganesh yarramsetty on Mar 10, 2011 7:27 PM

Hi,
whenever you click on Excel download option select spreadsheet instead of unconverted
There is a possibility of download the spool file as txt-file. .
Use Tranx SP01 - select the spool entry -->"spool request --> forward as text . You will find the file in your SAP work directory as <sid><spool#>.
or use fm RSPO_DOWNLOAD_SPOOLJOB.
Download in Background in Excel Format
How to download the data in excel format directly while executing in background mode?
If you will execute it in bacground with ws_download or download, it will be aoutomatically cancel. so what is the procedure to do this. How is can directly read the spool from program?
Download from background is possible, if you could setup the environment
1. create a custom table first
    Table : Y001
    Displayed fields:   4 of   4 Fixed columns:
       MANDT BNAME       Y_SITE    Y_PATH
       010      <userid>     <site>      cd <novell_path>
2. rewrite ws_download to z_download (light modification required, see attachment)
3. ask your basis team to make a copy of command FTP and CHMOD to ZFTP and ZCHMOD resp., make the setting according to your environment.
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of code
Hope this will will helps you,
Thanks and Regards,
Manjunath M
Edited by: manjunath4sap on Dec 23, 2010 6:20 PM
Edited by: Rob Burbank on Dec 23, 2010 9:02 PM

Count function displaying values in excel but not in Guage

Hi all,
I'm using Count function to count the no of rows at run time and trying to bind this value to a Gauge and input text components.
After Preview, the Gauge and input text components are showing value "0" but when I take a snapshot of the dashboard I can see the value in excel file.
What could be the reason ?
Thanks

Hi Jacob,
I'm also using Xcelsius 2008 SP2. When I use static data in excel it works fine, but the data in my Xcelsius is dynamic, using QAAWS as the data source developed on SAP BW. Count function has been used to do the calculations and when that particular cell is mapped as the data source for a Gauge or Text component it is showing "0" instead of the actual value.
Snapshot of the dashboard shows the value in the excel.
Very much confused as to what should be done .
Thanks

How to download the values to excel from spool sap abap

Dear All,
I am facing a problem in downloading the Zreport to excel file ( where it consists of 95 fields) ,
1.if am running the report in foreground and downlaod to excel file , the all 95 fields are upadting in excel file .
2.if i am schecduling the programe in background and saving inspool, then form spool , i am download to excel file , at that time some of the fields are overllapning ,
for this i want to download t o excel file without overlapping fields,
can any one suggest , how to do same procedue.
regards,
manoranjan

Hi,
whenever you click on Excel download option select spreadsheet instead of unconverted
There is a possibility of download the spool file as txt-file. .
Use Tranx SP01 - select the spool entry -->"spool request --> forward as text . You will find the file in your SAP work directory as <sid><spool#>.
or use fm RSPO_DOWNLOAD_SPOOLJOB.
Download in Background in Excel Format
How to download the data in excel format directly while executing in background mode?
If you will execute it in bacground with ws_download or download, it will be aoutomatically cancel. so what is the procedure to do this. How is can directly read the spool from program?
Download from background is possible, if you could setup the environment
1. create a custom table first
    Table : Y001
    Displayed fields:   4 of   4 Fixed columns:
       MANDT BNAME       Y_SITE    Y_PATH
       010      <userid>     <site>      cd <novell_path>
2. rewrite ws_download to z_download (light modification required, see attachment)
3. ask your basis team to make a copy of command FTP and CHMOD to ZFTP and ZCHMOD resp., make the setting according to your environment.
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of code
Hope this will will helps you,
Thanks and Regards,
Manjunath M
Edited by: manjunath4sap on Dec 23, 2010 6:20 PM
Edited by: Rob Burbank on Dec 23, 2010 9:02 PM

Need Help: Dynamically displaying parameter values for a procedure.

Problem Statement: Generic Code should display the parameter values dynamically by taking "package name" and "procedure name" as inputs and the values needs to be obtained from the parameters of the wrapper procedure.
Example:
a) Let us assume that there is an application package called customer.
create or replace package spec customer
as
begin
TYPE cust_in_rec_type IS RECORD
cust_id NUMBER,
,cust_name VARCHAR2(25) );
TYPE cust_role_rec_type IS RECORD
(cust_id NUMBER,
role_type VARCHAR2(20)
TYPE role_tbl_type IS TABLE OF cust_role_rec_type INDEX BY BINARY_INTEGER;
Procedure create_customer
p_code in varchar2
,p_cust_rec cust_in_rec_type
,p_cust_roles role_tbl_type
end;
b) Let us assume that we need to test the create customer procedure in the package.For that various test cases needs to be executed.
c) We have created a testing package as mentioned below.
create or replace package body customer_test
as
begin
-- signature of this wrapper is exactly same as create_customer procedure.
procedure create_customer_wrapper
p_code in varchar2
,p_cust_rec customer.cust_in_rec_type
,p_cust_roles customer.role_tbl_type
as
begin
//<<<<<---Need to display parameter values dynamically for each test case-->>>>>
Since the signature of this wrapper procedure is similar to actual app procedure, we can get all the parameter definition for this procedure using ALL_ARGUMENTS table as mentioned below.
//<<
select * from ALL_ARGUMENTS where package_name = CUSTOMER' and object_name = 'CREATE_CUSTOMER'
but the problem is there are other procedures exists inside customer package like update_customer, add_address so need to have generalized code that is independent of each procedure inside the package.
Is there any way to achieve this.
Any help is appreciated.
// >>>>
create_customer
p_code => p_code
,p_cust_rec => p_cust_rec
,p_cust_roles => p_cust_roles
end;
procedure testcase1
as
l_cust_rec customer.cust_in_rec_type ;
l_cust_roles customer.role_tbl_type;
begin
l_cust_rec.cust_id := 1;
l_cust_rec.cust_name := 'ABC';
l_cust_roles(1).cust_id := 1;
l_cust_roles(1).role_type := 'Role1';
create_customer_wrapper
p_code => 'code1'
,p_cust_rec => l_cust_rec
,p_cust_roles => l_cust_role
end;
procedure testcase2
as
l_cust_rec customer.cust_in_rec_type ;
l_cust_roles customer.role_tbl_type;
begin
l_cust_rec.cust_id := 2;
l_cust_rec.cust_name := 'DEF';
l_cust_roles(1).cust_id := 2;
l_cust_roles(1).role_type := 'Role2';
create_customer_wrapper
p_code => 'code2'
,p_cust_rec => l_cust_rec
,p_cust_roles => l_cust_role
end;
end;

Not possible to dynamically in a procedure, deal with the parameter values passed by a caller. There is no struct or interface that a procedure can use to ask the run-time to give it the value of the 1st or 2nd or n parameter.
There could perhaps be some undocumented/unsupported method - as debugging code (<i>DBMS_DEBUG</i>) is able to dynamically reference a variable (see Get_Value() function). But debugging requires a primary session (the debug session) and the target session (session being debugged).
So easy answer is no - the complex answer is.. well, complex as the basic functionality for this do exists in Oracle in its DBMS_DEBUG feature, but only from a special debug session.
The easiest way would be to generate the wrapper itself, dynamically. This allows your to generate code that displays the parameter values and add whatever other code needed into the wrapper. The following example demonstrates the basics of this approach:
SQL> -- // our application proc called FooProc
SQL> create or replace procedure FooProc( d date, n number, s varchar2 ) is
2 begin
3          -- // do some stuff
4          null;
5 end;
6 /
Procedure created.
SQL>
SQL> create or replace type TArgument is object(
2          name            varchar2(30),
3          datatype        varchar2(30)
4 );
5 /
Type created.
SQL>
SQL> create or replace type TArgumentList is table of TArgument;
2 /
Type created.
SQL>
SQL> -- // create a proc that creates wrappers dynamically
SQL> create or replace procedure GenerateWrapper( procName varchar2 ) is
2          procCode        varchar2(32767);
3          argList         TArgumentList;
4 begin
5          select
6                  TArgument( argument_name, data_type )
7                          bulk collect into
8                  argList
9          from    user_arguments
10          where   object_name = upper(procName)
11          order by position;
12
13          procCode := 'create or replace procedure Test'||procName||'( ';
14          for i in 1..argList.Count
15          loop
16                  procCode := procCode||argList(i).name||' '||argList(i).datatype;
17                  if i < argList.Count then
18                          procCode := procCode||', ';
19                  end if;
20          end loop;
21
22          procCode := procCode||') as begin ';
23          procCode := procCode||'DBMS_OUTPUT.put_line( '''||procName||''' ); ';
24
25          for i in 1..argList.Count
26          loop
27                  procCode := procCode||'DBMS_OUTPUT.put_line( '''||argList(i).name||'=''||'||argList(i).name||' ); ';
28          end loop;
29
30          -- // similarly, a call to the real proc can be added into the test wrapper
31          procCode := procCode||'end;';
32
33          execute immediate procCode;
34 end;
35 /
Procedure created.
SQL>
SQL> -- // generate a wrapper for a FooProc
SQL> exec GenerateWrapper( 'FooProc' );
PL/SQL procedure successfully completed.
SQL>
SQL> -- // call the FooProc wrapper
SQL> exec TestFooProc( sysdate, 100, 'Hello World' )
FooProc
D=2011-01-07 13:11:32
N=100
S=Hello World
PL/SQL procedure successfully completed.
SQL>

Displaying dynamic values in excel download

Similar Messages

Maybe you are looking for