Displaying filed value or other table filed in ALV output table

Hi,
I have a vendor leadger report displaying vendor balance statement witj all line item details, all data is present in One final table this final table i hvae shown in output but along with this in the first line in output i want to display openig balance of that vendor and in the last line i want to display closing balance of that vendor in the period for opening balance and closing balabce i have that amount in the diffrent tables or fileds how to display that amount in output along with my Final table .
regards,
zafar

hi ,
    Do this way
1) get the opening balance
2)   append that line to final table
3) then append data from other table in final table where data for all line item
4) then again get closing balance
5) append that data in final table and you will get first line as opening balance ,then middle data and last closing data .
regards
Deepak .

Similar Messages

Set the records in ALV output table

Dear Experts,
How to set the number of records in the ALV output as 10..i.e .. When user executes WD application the output
of the ALV output table should contains only 10 records in every page.
Thanks in advance.

Hi Venkat
Use the method SET_VISIBLE_ROW_COUNT of interface IF_SALV_WD_TABLE_SETTINGS.
the following code may help you.
DATA: l_ref_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
DATA : lr_table_settings TYPE REF TO if_salv_wd_table_settings.
l_ref_cmp_usage =   wd_This->wd_CpUse_Appr( ).
if l_ref_cmp_usage->has_active_component( ) is initial.
    l_ref_cmp_usage->create_component( ).
endif.
l_ref_INTERFACECONTROLLER =   wd_This->wd_CpIfc_Appr( ).
data:
    l_VALUE type ref to Cl_Salv_Wd_Config_Table.
l_VALUE = l_ref_INTERFACECONTROLLER->Get_Model(
lr_table_settings = l_value.
lr_table_settings->set_visible_row_count( 10).
Regards
Naresh
Edited by: Naresh Kumar Malik on Jun 20, 2008 11:46 AM

How to display dynamic values in poplist at row level in advanced table

I want to display dynamic values in poplist at row level based on a row value in advanced table, with lov i can achieve it, is there any way to achieve this in poplist
Thanks
Bbau

Babu,
You have been long enough in forum and still come out with these one liners. Problem statement is not clear.
--Shiv

Display Specific Values, Suppress others In SQL Query

Hi Everyone,
I am processing a donor report that displays certain status_codes
and suppresses those that do not meet the specified criteria.
mgt wants the specified codes to standout from the others especially with 100,000 donor records.
the specified codes are : 'UDAD' and 'DECD'.
CREATE TABLE DONOR(donor_id number(4), first varchar2(20),last Varchar2(20));
INSERT INTO DONOR(donor_id,first,last) VALUES(1111, 'John', 'Smith');
INSERT INTO DONOR(donor_id,first,last) VALUES(2222, 'Mary', 'Jane');
INSERT INTO DONOR(donor_id,first,last) VALUES(3333, 'Tom', 'Harris');
INSERT INTO DONOR(donor_id,first,last) VALUES(4444, 'Sandy', 'Lee');
CREATE TABLE DONOR_STATUS(donor_id number(4), status_code varchar2(4));
INSERT INTO DONOR_STATUS(donor_id,status_code) VALUES(1111, 'UDAD');
INSERT INTO DONOR_STATUS(donor_id,status_code) VALUES(2222, '998');
INSERT INTO DONOR_STATUS(donor_id,status_code) VALUES(3333,'STMP');
INSERT INTO DONOR_STATUS(donor_id,status_code) VALUES(1111, 'SSS');
INSERT INTO DONOR_STATUS(donor_id,status_code) VALUES(2222, 'ECON');
INSERT INTO DONOR_STATUS(donor_id,status_code) VALUES(3333,'NFEX');
INSERT INTO DONOR_STATUS(donor_id,status_code) VALUES(1111, 'NCOA');
INSERT INTO DONOR_STATUS(donor_id,status_code) VALUES(2222, '995');
INSERT INTO DONOR_STATUS(donor_id,status_code) VALUES(3333,'DECD');
INSERT INTO DONOR_STATUS(donor_id,status_code) VALUES(4444,'UNEM');
INSERT INTO DONOR_STATUS(donor_id,status_code) VALUES(4444,'801');
the output should look like this :
STAT   DONOR_ID FIRST                LAST
UDAD       1111 John                 Smith
           2222 Mary                 Jane
DECD       3333 Tom                  Harris
           4444 Sandy                Leethis is the query I've written so far:
select distinct decode(s.status_code,'UDAD','UDAD','DECD','DECD',null) Statcode,d.donor_Id, first,last
from donor d, donor_status s
where s.donor_id(+)=d.donor_id order by d.donor_idwith this ouput:
STAT   DONOR_ID FIRST                LAST
UDAD       1111 John                 Smith
           1111 John                 Smith
           2222 Mary                 Jane
DECD       3333 Tom                  Harris
           3333 Tom                  Harris
           4444 Sandy                Lee
6 rows selected.it rolls up the non-criteria codes into one row with null value, then outputs the desired row with 'UDAD' or 'DECD' duplicating the output for those donors with the matching criteria code but who also have other non-criteria codes.
any tips/help greatly appreciated.

Hi,
Here's one way:
SELECT    STRAGG (s.status_code)     AS Statcode
,       d.donor_Id
,       d.first
,       d.last
FROM          donor          d
LEFT OUTER JOIN donor_status      s ON   s.donor_id     = d.donor_id
                               AND     s.status_code     IN ('DECD', 'UDAD')
GROUP BY   d.donor_id, d.first, d.last
ORDER BY   d.donor_id
;You can't use OR or IN in an old-style outer join; that's why I used ANSI syntax.
Is it possible that the same donor would be both 'DECD' and 'UDAD'? What output would you want in that case?
If you have the user-defined aggregate funtion STRAGG, available from AskTom:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:2196162600402
you could use STRAGG (s.status_code) instead of MIN (s.status_code), and get 'DECD,UDAD' when applicable.
Edited by: Frank Kulash on Jan 19, 2011 5:08 PM
Added STRAGG option

How to display slected value in other list in apex?

Hi All,
I have created two select list
1. Counrty
2.State
Based on the selection of country state wil lbe popluated, which i had implemneted using ajx process.
Now i had created a button, on press of button again i will be dsiplaying second set of select lit items i.,e againg counrty and state.
so what ever we selected from first select list..the same values should be populated in the second list items?
How we achieve this?
Thanks,
Anoo..

Hi All,
Thanks, but may be my explanation is not celar i believe.
Initally i have created 4 selects list items as
1. Country
2.State.
3. Country1
4.State1
When the page loads i will be hiding the select list items ie. country1 and state1 will not be visibile on the screen, unless once click on button i will be displaying the
country1 and state1.
Now the data whcih we had selected in country and state nedds to be populated same data in country1 and state1 once i clicked on a button.
How do we show this data when they clik on button.
Thanks,
Anoo..

UI Table Element vs ALV for Table Edit App

Iu2019ve coded some of the tutorial examples. Now Iu2019m ready to put together an app.
I need to present the user with a table of data. The app allows a user to set a new responsible person based on his pernr (employee number) . Here's what a record might look like:
Field1                            r/o
Field2                            r/o
Field3                            r/o
Current Responsible PERNR         r/o
Current Responsible NAME          r/o
New Responsible PERNR             r/w    (needs a search help as well)
New Responsible NAME              r/o to user, but app will derive value from NEW pernr and fill it in
New Responsible PERNR    and    New Responsible NAME      are initially blank.
It seems that I can go with a table UI element or ALV.
It seems that I can set columns read-only or editable in either.
What do people use?
Is one preferable to the other?
Are table UIs just too 'old school'?
I welcome comments and opinions from the group.
...Mike
Edited by: Michael McInerney on Nov 20, 2009 2:17 PM

Hi Michael,
In my opinion, i would go for ALV because of the following reasons.
1. Ease of coding, i we have a large number of records, but only a few to update, the code becomes more easier. This is because ALV has a standard functionality which automatically checks which records have been updated and gives us the column and row number for that. We don't need to check for changes in the fields.
2. Better look and feel compared to UI elements.
3. Standardized approach...... better to use Standard SAP functionality
4. More Functionality with minimal coding. eg we can use views, filters and custom views. All are provided and just need to be called.
Hope that provided some insight into ALV advantages :o)
Best Regards,
Mz

How to map lookup main table field in another main table using MDM 7.1?

We created a new SAP MDM 7.1 repository with multiple main tables. The first main table is called ProductMaster table which contains Products information. The ProductCode is the primary key and the only display field for the table during data loading process. The second main table is ProductByRegion table which has a main table lookup field ProductCode and a RegionId field. These two fields (ProductCode and RegionId) combine as the PK for this main table. Both main tables have key mapping enabled.
I was able to load ProductMaster table using Import Manager. But Iu2019m having trouble to load data into ProductByRegion table using MDM Import Manager. Although I have met all the 5 requirements below (excerpted from MDM Import Manager Reference Guide P.222), the ProductCode wonu2019t show up on the destination value pane. If I mapped all productCode to NULL field, ProductCode wonu2019t load. If I u2018Addu2019 all ProductCode to Destination Value pane, the Import Manager added duplicated rows to Product Master table while only loading 1 record to ProductByRegion table. I canu2019t get ProductCode show up in Matching Destination Field list. When I checked ProductMaster records in MDM Data Manager, I right-clicked on one of records, chose Edit Key Mappings, it didnu2019t show anything. However, if I right-clicked on one of those duplicated rows, Edit Key Mapping shows remote system and key correctly.
Where did I do wrong? How can I fix the problem?
Thank you for help in advance.
From: SAP MDM Import Manager Reference Guide:
Mapping to Main Table Lookup Destination Fields
Import Manager handles main table lookup fields (Lookup [Main])
differently than other MDM lookup fields. Specifically, Import Manager
does not display the complete set of display field values of the records
of the underlying lookup table. Instead, the values it displays for a main
table lookup field are limited by both the key mappings for the lookup
table and the values in the source file.
Also, Import Manager does not automatically display the values of a
Lookup [Main] destination field in the Destination Values grid when you
select the field in the Destination Fields grid. Instead, for a main table
lookup field value to appear in the Destination Values grid, all of the
following conditions must be met:
u2022 The lookup table must have key mapping enabled
u2022 The lookup field must be mapped to a source field
u2022 The source field must contain key values for the lookup table
u2022 The destination value must have a key on the current remote system
u2022 The destination valueu2019s key must match a source field value
NOTE ►► The current remote system is the remote system that was
selected in Import Manageru2019s Connect to Source dialog (see
u201CConnecting to a Remote Systemu201D on page 416 for more information).
Vicky

Hi Michael,
Thank you very much for your response. I'm new to SAP MDM, I need some clarification and help regarding your solution.
I did use two maps to load ProductMaster and ProductByRegion separately. Here were my steps:
1. create main table ProductMaster with key mapping enabled at the table level and set ProductCode as unique and writable once (primary key).
2. create a map to load ProductMaster record from a staging table located an oracle database. But Key mapping didn't show anything when I looked at them using Data Manager.
3. create main table ProductByRegion with a lookup field looking at ProductMaster table. This field and RegionId combines as a unique field for ProductByRegion table.
4. create a map to load ProductByRegion table. But ProductCode records only shows on the source pane not destination pane and can't be mapped properly.
My questions:
1. How can I "Ensure that you add key mapping info for all ProductMaster records" besides enabling Key Mapping on the table level?
2. How can I define a concatenation of ProductCode and RegionId as a REMOTE KEY"?
Thanks a lot for your help!
Vicky

Tow internal table to one commone internal table

hi
i have two internal table
itab1 having fields
f1
f2
f3
f4
and second internal table having fields
HERE F1 IS COMMON FIELD BETTWEEN TWO
f1
f5
f6
f7
f8
f9
f10
i want the data of both the internal table into one final table having data
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
IE COMBINED DATA OR BOTHE IE I AM ADDING THE COLUIMNS OF INTERNAL TABLE 1 AND INTERNAL TABLE 2 TO FINAL OUTPUT TABLE
PLEASE SUGGEST ?
REGARDS
ARORA

hi RAAM
the situation is like this
her is the internal table with data and rows
IT_APC                         Table[58x64]
it_dep                         Table[14x48]
it_Dep_Apc                     Table[1x108]
now iand combining data of itapc and itdep to it_dep_apc
both have only one common firled bukrs
and as rows and columns as displayed above
now if i do below as suggeted by u
LOOP AT IT_APC INTO WA_APC.
READ TABLE IT_DEP INTO WA_DEP WITH KEY BUKRS = WA_APC-BUKRS
BINARY SEARCH.
then the all the data is not combined i suppose as i need to have the final table all the data from both the internal tables....
ie common rows plus extra rows for bukrs
regards
Arora

Field of character length 255 not displaying in ALV output

Dear all,
i am trying to display a field of ztable with lenght 255 character, same is not displaying at ALV output.
it is displaying only upto 128 characters in ALV output.
table is Ztable-zfield with CHAR255 length.
please help me.
Regards,
Sam.

Hi Sam Johny,
In ALV Grid the maximum characters can be displayed in one column is 128 Characters..
But for your solution you can press Print Preview Button to view more text(or Press Ctrl + Shift + F10 )...
Else try with ALV LIST
and pass FIELDCAT-OUTPUTLEN = '255' for field in fieldcatalog
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

Sub: How to update value of a single filed in the standard table without u

Hi experts,
In the standard webdynpro component , i want to change particular field value based on some condition. I cannot use bind table to update the single value, because other filed attributes are getting cleared .so is there any way to update only particular row related field value. Please let me know. This is very urgent. Please post if you have any idea.

Srinivasu Y wrote:
> I cannot use bind table to update the single value, because other filed attributes are getting cleared .so is there any way to update only particular.
Hi,
It is clearing because you are just updating only that particular field direclty.,
instead First You read the selected Row using get_static_attributes( ls_tab ) method .
no in ls_tab modify your required field and then rebind it .
hope this clears your doubt.,
Thanks & Regards,
Kiran

FRM-40831 : Truncation occured: value too long for filed MAST_EMP_NAME

Hi
I'm using Forms 5 and getting following error.
FRM-40831 : Truncation occured: value too long for filed MAST_EMP_NAME.
When i checked in the column Mast_emp_name, all the values are with in the limit.
Table contains some 9 lacs record.
Please help me. this is very urgent

check the maximum length - property of all those 5 columns in your form. They have to be as long as in the database. Except number. They have to be 1 char longer than in the db.
Forms-Online-Help says:
This property can potentially limit the amount of data that an item is allowed to contain internally (in the Forms server) when it's in native format. It can also potentially limit the number of character (or bytes) displayed or entered by the end user. That is, it can specify a data limit and/or a user interface (UI) limit. The exact effect depends upon several factors, including the item's Data type, Data Length Semantics, and Format Mask properties. For a character item (datatypes CHAR, ALPHA, LONG), the Maximum Length property specifies a data limit. The property value specifies either the maximum number of bytes or else the maximum number of characters, depending upon the value of the Data Length Semantics property. Within a group of character mirror items, the Maximum Length property is always taken from the master mirror item. A compiler (generator) warning is issued if a non-zero non-default value is specified in a subordinate mirror item. If a character item has no format mask (the Format Mask property is null), then the Maximum Length property (taken from the master mirror item) also specifies a UI limit. When the Forms server is using the UTF8 character set , this UI limit has the same semantics (byte versus character) as the data limit. When the Forms server is using a multi-byte character set other than UTF8, and the Data Length Semantics property specifies byte semantics, Forms cannot prevent the end user from typing in too many bytes. Instead, it uses character semantics for the UI limit. In such a case, the end user is allowed to type in too many bytes. When the end user attempts to navigate out of the current validation unit, one of two things will happen. If the application property FLAG_USER_VALUE_TOO_LONG is set, an error will be flagged and the excess characters on the right will be selected. If this application property is not set, the excess characters will be quietly truncated, and the navigation will succeed. If a character item has a format mask, then the item's UI limit is derived from the format mask. This limit is always a character limit. For a number item (datatypes NUMBER, INT, MONEY, RNUMBER, RINT, RMONEY), the Maximum Length property specifies a user interface limit. This limit is always a character limit. There is no data limit. The data item can always internally hold up to 23 bytes (which is the maximum size of an Oracle number in native format), regardless of the value of the Maximum Length property. For a date or time item (datatypes DATETIME, DATE, TIME, JDATE, EDATE), the Maximum Length property specified in Forms Builder has almost no effect (See the Query Length property for a discussion of the only effect). As with "number" items, there is no data limit. For DATE and DATETIME items, the internal value is 7 bytes long, and for TIME, JDATE and EDATE items, the internal value is 4 bytes long . The user interface limit is derived from the format mask. This limit is always a character limit which is what is returned by GET_ITEM_PROPERTY(item, MAX_LENGTH).

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

How to add source message filed value in dynamic generated xml file ??

Hi Friends..
in my idoc to file....
i want to add one of my source idoc fields value in the dynamic generated file....
filename _field.xml...
so how to get that filed value in java section ...
i am not using that field in mapping..
please help me...
regards
ram

Hi,
<i> <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">User: s_ra</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="2" type="T">Tunneling needed?</Trace>
<Trace level="2" type="T">Partytype = LS fallback to logical system</Trace>
<Trace level="3" type="T">Sender Interface</Trace>
<Trace level="3" type="T">IORDER.IORDER01 urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">Syntax-Check-Flag X</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPSRD</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_STRUCTURE_GET Details</Trace>
<Trace level="2" type="T">Port : SAPSRD</Trace>
<Trace level="2" type="T">IDoctyp : IORDER01</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">RFCDest :</Trace>
<Trace level="2" type="T">Release : 640</Trace>
<Trace level="2" type="T">Version : 3</Trace>
<Trace level="2" type="T">Direct : 1</Trace>
<Trace level="2" type="T">SAPREL : 640</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_SYNTAX_CHECK</Trace>
<Trace level="2" type="T">Port : SAPSRD</Trace>
<Trace level="2" type="T">IDoctyp : IORDER01</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">Create XML-Control Record</Trace>
<Trace level="2" type="T">Create XML-Data Records</Trace>
<Trace level="3" type="T">Create data Record E1ORHDR</Trace>
<Trace level="3" type="T">Create data Record E1OROPR</Trace>
</Trace>
<Trace level="2" type="T">Partytype = LS fallback to logical system</Trace>
<Trace level="2" type="T">Set Sender Routing-object</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = DGX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = s_ra</Trace>
<Trace level="1" type="Timestamp">2006-12-14T10:44:28Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 4580F8399E23011E000000000A967130</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = 4580F8399E23011E000000000A967130</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0008</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0008</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = 4580F8399E23011E000000000A967130</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = DGX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = s_ra</Trace>
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="3" type="T">...create rule engine</Trace>
<Trace level="3" type="T">...call rule engine for Condition %CL_SAI_SWF_RULE_ENGINE.MSG_GET(MSG=&_MSG&;NSP=&_NSM&;XPATH="/IORDER01/IDOC/E1ORHDR/E1OROPR/ARBPL")% CE 2</Trace>
<Trace level="2" type="T">......extracting (new) for Extractor: XP /IORDER01/IDOC/E1ORHDR/E1OROPR/ARBPL</Trace>
<Trace level="2" type="T">......extracting values found: 1</Trace>
<Trace level="2" type="T">...invalid Receiver: - BS_FTP_MES_2_WorkOrder_Create</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 2</Trace>
<Trace level="3" type="T">...call rule engine for Condition %CL_SAI_SWF_RULE_ENGINE.MSG_GET(MSG=&_MSG&;NSP=&_NSM&;XPATH="/IORDER01/IDOC/E1ORHDR/E1OROPR/ARBPL")% CE 1</Trace>
<Trace level="2" type="T">...valid Receiver with Condition: - BS_FTP_MES_1_WorkOrder_Create</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 3</Trace>
<Trace level="3" type="T">...call rule engine for Condition %CL_SAI_SWF_RULE_ENGINE.MSG_GET(MSG=&_MSG&;NSP=&_NSM&;XPATH="/IORDER01/IDOC/E1ORHDR/E1OROPR/ARBPL")% CE 3</Trace>
<Trace level="2" type="T">...invalid Receiver: - BS_FTP_MES_3_WorkOrder_Create</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 4</Trace>
<Trace level="3" type="T">...call rule engine for Condition %CL_SAI_SWF_RULE_ENGINE.MSG_GET(MSG=&_MSG&;NSP=&_NSM&;XPATH="/IORDER01/IDOC/E1ORHDR/E1OROPR/ARBPL")% CE 4</Trace>
<Trace level="2" type="T">...invalid Receiver: - BS_FTP_MES_4_WorkOrder_Create</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_FTP_MES_1_WorkOrder_Create MI_IN_MES_WorkOrderCreation</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MI_IN_MES_WorkOrderCreation</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOR1__0000</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = DGX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = s_ra</Trace>
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
<Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST" />
- 
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV" />
- 
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Append context with name =SNDPOR and value =SAPSRD</Trace>
<Trace level="3" type="T">Append context with name =SNDPRN and value =SRDCLNT400</Trace>
<Trace level="3" type="T">Append context with name =SNDPRT and value =LS</Trace>
<Trace level="3" type="T">Append context with name =RCVPOR and value =SAPDGX</Trace>
<Trace level="3" type="T">Append context with name =RCVPRN and value =DGX100</Trace>
<Trace level="3" type="T">Append context with name =RCVPRT and value =LS</Trace>
<Trace level="3" type="T">Append context with name =MESTYP and value =IORDER</Trace>
<Trace level="3" type="T">Append context with name =IDOCTYP and value =IORDER01</Trace>
<Trace level="3" type="T">Append context with name =CIMTYP and value =</Trace>
<Trace level="3" type="T">Mapping is already determined in the interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 6FF8D506C84B3050B127F2EF024B796F</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping B2CF8EF067FF11DBA742D7830A967135</Trace>
<Trace level="1" type="T">Interface Mapping http://aaaa.com/xi/SAP_ERP_azar/PPE/ERP_MES IM_SAP_IORDER_To_WorkOrder_Creation</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_</Trace>
<Trace level="3" type="T">Dynamic Configuration ( http://sap.com/xi/XI/System/IDoc SNDPOR SAPSRD ) ( http://sap.com/xi/XI/System/IDoc SNDPRN SRDCLNT400 ) ( http://sap.com/xi/XI/System/IDoc SNDPRT LS ) ( http://sap.com/xi/XI/System/IDoc RCVPOR SAPDGX ) ( http://sap.com/xi/XI/System/IDoc RCVPRN DGX100 ) ( http://sap.com/xi/XI/System/IDoc RCVPRT LS ) ( http://sap.com/xi/XI/System/IDoc MESTYP IORDER ) ( http://sap.com/xi/XI/System/IDoc IDOCTYP IORDER01 ) ( http://sap.com/xi/XI/System/IDoc CIMTYP )</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_.</Trace>
<Trace level="3" type="T">Load b2cf8ef0-67ff-11db-a742-d7830a967135, http://aaaa.com/xi/SAP_ERP_azar/PPE/ERP_MES, -1, com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_.class.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_.class (http://aaaa.com/xi/SAP_ERP_azar/PPE/ERP_MES, -1) in swcv b2cf8ef0-67ff-11db-a742-d7830a967135.</Trace>
<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_SAP_IORDER_To_MES_WorkOrderCreation_</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_SAP_IORDER_To_MES_WorkOrderCreation_</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:357) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.MessageMappingException: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:56) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:41) at com.sap.aii.mappingtool.flib3.IfWithoutElse.getValue(IfWithoutElse.java:18) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:47) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:41) at com.sap.aii.mappingtool.flib3.IfWithoutElse.getValue(IfWithoutElse.java:18) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Caused by: java.lang.IllegalArgumentException: Cannot cast null to boolean at com.sap.aii.mappingtool.flib3.Bool.toBoolean(Bool.java:17) at com.sap.aii.mappingtool.flib3.Bool.equals(Bool.java:37) ... 37 more</Trace>
<Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322]</Trace>
<Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:357) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.MessageMappingException: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:56) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:41) at com.sap.aii.mappingtool.flib3.IfWithoutElse.getValue(IfWithoutElse.java:18) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:47) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:41) at com.sap.aii.mappingtool.flib3.IfWithoutElse.getValue(IfWithoutElse.java:18) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Caused by: java.lang.IllegalArgumentException: Cannot cast null to boolean at com.sap.aii.mappingtool.flib3.Bool.toBoolean(Bool.java:17) at com.sap.aii.m

Delete user table - Filed

Can anyone tell me how to delete the TABLE and FIELD i created .... using code.
i.e. While i reach a condition true...i want to create a table(ANY TYPE) and 2 field(ANY TYPE)..and if the condition reaches other values..i need to delete the created table or filed...It depends up on the condition.
1. Create A table and field.
2. Delete a field from a specified user table.
3. Delete the whole table (any i.e doc,docline,master,masterline,no object)...
PLEASE TELL ME TO WRITE THE CODE

Hi,
For create table
oTables = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
oTables.TableName = "tablename"
oTables.TableDescription = "TableDescription"
oTables.TableType = "Tabletype"
iRet = oTables.Add()
For delete table-fields and table use see this thread
[Delete user table - Filed;
Thanks,
Mahesh

Displaying default value for a field in ALV table

Hai all,
     I am having an ALV table in which I want to display Requisition number by default using a value which i generated randomly and it is stored in a variable.
While displaying ALV table my req number field should display that value by default when ever user is inserting a row( all the coloumns n my alv are editable.
Is it possible??
Kindly give some suggestions.
Thanks in Advance,
Nalla.B

Hai Kris,
    I took help from ur link and i declared a global attribute request_number.
and i created an event handler ON_ALV_INSERT and did the follwing coding for giving default value wen ever am inserting new row.
FIELD-SYMBOLS: <wa_row> LIKE LINE OF r_param->t_inserted_rows.
DATA bill_details TYPE REF TO zdom_bill_detail.
LOOP AT r_param->t_inserted_rows ASSIGNING <wa_row>.
    bill_details ?= <wa_row>-r_value.
    IF bill_details->REQ_NUMBER IS INITIAL.
DATA lo_nd_bill_detail TYPE REF TO if_wd_context_node.
DATA lo_el_bill_detail TYPE REF TO if_wd_context_element.
DATA ls_bill_detail TYPE wd_this->Element_bill_detail.
navigate from <CONTEXT> to <BILL_DETAIL> via lead selection
lo_nd_bill_detail = wd_context->get_child_node( name = wd_this->wdctx_bill_detail ).
lo_el_bill_detail = lo_nd_bill_detail->get_element( index = <wa_row>-index ).
      lo_el_bill_detail->set_attribute(
        EXPORTING
          name = 'REQ_NUMBER'
          value = wd_comp_controller->request_number
Wen am setting the value of wd_comp_controller->request_number to my context attribute am getting NULL object ref error.
lo_el_bill_detail->set_attribute(
    name = `REQ_NUMBER`
    value = wd_comp_controller->request_number ).
Pls give some suggestions,
Thanks in Advance,
Nalla.B

Displaying filed value or other table filed in ALV output table

Similar Messages

Maybe you are looking for