Sub: How to update value of a single filed in the standard table without u

Hi experts,
In the standard webdynpro component , i want to change particular field value based on some condition. I cannot use bind table to update the single value, because other filed attributes are getting cleared .so is there any way to update only particular row related field value. Please let me know. This is very urgent. Please post if you have any idea.

Srinivasu Y wrote:
> I cannot use bind table to update the single value, because other filed attributes are getting cleared .so is there any way to update only particular.
Hi,
It is clearing because you are just updating only that particular field direclty.,
instead First You read the selected Row using get_static_attributes( ls_tab ) method .
no in ls_tab modify your required field and then rebind it .
hope this clears your doubt.,
Thanks & Regards,
Kiran

Similar Messages

Can we change the UCCX server from single node to the first node without affecting it's configurations

Hi all,
Firstly I was using the single CUCM7.0 server with the single UCCX 7.0 server. Now I am going to add the second CUCM and UCCX in the cluster. I was first configured the UCCX server as a single node. Now I have to configure this as a first node. How I could configure this from single node to the first node without affecting it's configurations..??????
Regards
Ali Raza

Hi Aaron,
How could we do the change on Imhost file. How we add the both servers in that file?
Below is the Imhost file txt.
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample LMHOSTS file used by the Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to computernames
# (NetBIOS) names. Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
# corresponding computername. The address and the computername
# should be separated by at least one space or tab. The "#" character
# is generally used to denote the start of a comment (see the exceptions
# below).
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#      #PRE
#      #DOM:
#      #INCLUDE
#      #BEGIN_ALTERNATE
#      #END_ALTERNATE
#      \0xnn (non-printing character support)
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
# Following an entry with the "#DOM:" tag will associate the
# entry with the domain specified by . This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The is always preloaded although it will not
# be shown when the name cache is viewed.
# Specifying "#INCLUDE " will force the RFC NetBIOS (NBT)
# software to seek the specified and parse it as if it were
# local. is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
# The following example illustrates all of these extensions:
# 102.54.94.97     rhino         #PRE #DOM:networking #net group's DC
# 102.54.94.102    "appname \0x14"                    #special app server
# 102.54.94.123    popular            #PRE             #source server
# 102.54.94.117    localsrv           #PRE             #needed for the include
# #BEGIN_ALTERNATE
# #INCLUDE \\localsrv\public\lmhosts
# #INCLUDE \\rhino\public\lmhosts
# #END_ALTERNATE
# In the above example, the "appname" server contains a special
# character in its name, the "popular" and "localsrv" server names are
# preloaded, and the "rhino" server name is specified so it can be used
# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
# system is unavailable.
# Note that the whole file is parsed including comments on each lookup,
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.
Regards
Ali Raza

How to add field value to the standard table

Hi,
How to add field value to the standard table?
for example:
when we go to TCODE SE16-> VBAK table -> on the selection screen if we press F4 against VBTYP we get all the available values for that field. How to add a new document Category value to this field so that it shows up in F4 help for that field.

Hi Asif,
I don't think it is possible and feasible for adding new field value to the field VBTYP because it is not possible through SPRO.
If u see the domain of this field VBTYP we have fixed values provided by SAP. There is no value table for this. If u have value table then it will be updated through SPRO. But still if u really want to add some value u can do that by getting access key and add the value in the fixed values of the domain. But of no use other than simply displaying in F4. Because for what ever value u created here there will be no documents in VBAK or any table using this domain.
Hope this is clear for u.
Thanks,
Vinod.

Any way to pass Multiple Values for a single Label in the Parameter?

I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter.
PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
QUESTION:
Any way to pass Multiple Values for a single Label in the Parameter?
I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
it correct.
I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
Note: We are using Report Builder 3.0

Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
Try creating either a function or stored procedure using the code below (compliments to
http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string:
CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
BEGIN
DECLARE @SeparatorPosition INT
DECLARE @ArrayValue VARCHAR(1000)
SET @Array = @Array + @Separator
WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
BEGIN
SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
END
RETURN
END
Once created you can do things like this:
SELECT * FROM Parse('John,Bill,David,Thomas', ',')
SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
This is what your SQL query would probably look like:
SELECT OperationID, OperationName FROM dbo.Operations
WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?

How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?

Thanks for looking into this Jeff!
I work with an Inventory module software and is responsible for software detection across several computers. Once an updated version comes up, I update our database with latest software details to get it detected if installed on any machines.
The problem tracking updates with Desktop Creative Cloud Software are;
1)We have to have it installed with the CC applications in-order to get the notification of the latest updates and have to check everyday.
2)Only relates to the latest updates, so in-between we may miss a prior update unknowingly.Hence, the remote machines having those updates may not get detected with the software version update which would create problem in reporting.
3)For all CC products, there is no base or previous updates available for installation if we miss one.
I went through the Adobe Products Update pages [Product updates] which holds good when it comes to Acrobat and Reader software which I follow to track down any newer updates but this is inconsistent when it comes to CC products like in After Effects CC, Dreamweaver CC etc...
So overall to be very specific, is there any one channel I can follow to get the notifications only for the updates on CC products and then may be I can rely on Desktop Creative Cloud for installation if not available anywhere like in product update pages of Adobe ?
Regards,
Subrat

HT4972 How to update I phone 4( iOS 4) to the latest version .not only that but updating my old software to a new in a iPhone 4 will it make any problem to the device or loose it's data completely .

How to update I phone 4( iOS 4) to the latest version .not only that but updating my old software to a new in a iPhone 4 will it make any problem to the device or loose it's data completely .

chrissaji1998 wrote:
How to update I phone 4( iOS 4) to the latest version ...
All the Information you need is in the Support Article you posted from.
iOS 4: Updating your device to iOS 5 or later

I bought an iphone 5 where the warranty goes up to May 2014. On 22/02 I did the update of iOS 7.0.6 and the same was without service. The model is the A1429 which has no assistance in Brazil. How should I proceed? thank youI bought an iphone 5 where th

I bought an iphone 5 where the warranty goes up to May 2014. On 22/02 I did the update of iOS 7.0.6 and the same was without service. The model is the A1429 which has no assistance in Brazil.
How should I proceed?
thank you

Take it back to Apple in the US where the iPhone originated ,any Apple Store genius bar will look at it under warranty

How to create a custom task in SRM for the standard task

Hi Gurus,
How to create a custom task in SRM for the standard task eg: TS10407929
regards,
George.

from PFTC itself. Same.

One laptop died. I have a new laptop now. How can I get my Ipod song list on the new laptop without downloading each c.d.?

My first laptop died. I have a new laptop now. How can I get my Ipod song list on the new laptop without downloading each c.d.?

See this older post from another forum member Zevoneer covering the different ways to copy content from your iPod to your PC.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

How to modify the standard table

plzzzzz answer my qestion.
how to modify the standard table?
in my knowedge we have the accese key is it correct or worng

Hi
The system asks for access key only of two reasons:
1) You may be having problem of access rights. You would have to contact basis peopl.
2) You may try to name an object not complying with the rules. You may have to check with the same.
the process of getting access key is
the steps to get access key
you can also try via transaction OSS1
In your Inbox, click on 'Registration', then on 'Register Objects', then you will have to choose your installation and give details about your object.
The details you can get by going to your object and clicking on 'Change' - the pop-up screen which asks you for the access key gives you all the details you need to fill in on OSS1 to get your key.
or
U can get Access key from www.service.sap.com
After getting into the site,select quicklinks, then click s to goto SSCR, in
that select registration,
after giving the proper details, u can get the access key
or
on sap support portal (sapnet)
--> key & request
---> register SSCR key
---> registration
---> register developper
and then choose your rigth installation number
you can get the access key in this way
reward if usefull

How to update value in internal table from cdpos taking fname n value_new?

hello everyone,
 i want to insert value in internal table from cdpos table taking field name from fname and value from value_new.but the problem is i am not getting how to map the corresponding field of internal table with fname value which is the field name.
for example
i
fieldname
value
name1
raj
name2
sharma
i want to update field name1. this name1 is there in fname with updated value in value_new how to make name1 with fname value
thanks and regards
laxmikant soni

Hi Laxmikant,
If I have understood your requirement correctly, you need to update an internal table with latest 'value_new' from cdpos table where 'fname' = 'fieldname' .
Hope the below logic will help you:
FIELD-SYMBOLS: <wa_intab> LIKE LINE OF lt_intab. "the internal table you want to change
LOOP AT lt_intab ASSIGNING <wa_intab> .
 READ TABLE lt_cdpos INTO wa_cdpos "lt_cdpos contains latest data selected from CDPOS
 WITH KEY fname = <wa_intab>-fieldname.
 IF sy-subrc = 0.
 <wa_intab>-value = wa_cdpos-value_new.
 ELSE.
 "//logic if the name is not there in CDPOS
 ENDIF.
 CLEAR wa_cdpos.
ENDLOOP.
If you wish to improve performance, I suggest using
1. "transporting value_new" addition in READ TABLE,
2. select only the data which you require from CDPOS,
3. create the internal tables with only fields which you require,
4. when you are using SELECT,LOOP AT statements, limit records by using WHERE condition
Regards,
Kavya

How to update values to the database?

hi all!
iam using a simple form where some 4 or 5 textitems are used.
with a select query, iam selecting a particular record.
say, if i update a particular value(column), then how can
i make the code in such a way that only particular column is
updated.
p.s:
my query shud not update all the column values.
is anyone can help me?
thanks.

Maybe you can use the following to find out where the cursor is, then check if that field has been updated:
SYSTEM.CURSOR_ITEM
Description
SYSTEM.CURSOR_ITEM represents the name of the block and item, block.item, where the input focus (cursor) is located.
The value is always a character string. hi Bob!
hope this logic works out.But can u explain with some code sample.
Thanks a lot.

How to update values for qty n batch in mska table

Hi experts,
i would lke to know is it possible that we can update value of availabity of stock which is existing batch wise in MSKA table field 'kalab' (qty) n charg (batch).
i mean we have devided material per document number into batch a b c.
suposse
we have '20015' material
for doc1 (vbeln) -- A qty 5
B qty 5
C qty 0
for doc2 (vbeln) A qty 2
C qty 5
B qty 0
But after delivery we want to change the distribution of stock material like .
for doc1 A qty 2
B qty 3
C qty 5
and for doc2 A qty 5
B qty 2
C qty 0
i create one programe and check the availabity in mska table n give input field to reorder the batch n quantity but how should i send these values in mska table so that sap will show the correct availabity of stock batch wise.
if somebody did it before. through ur input please .
Thanks.
Seema

Hi sutar,
Seems it is not WD related Question.
You are updating two tables here, but not updating in Database. check two tables how they are related.
and mysuggestion is try to update thease two tables by using code in se38. you will get where the problem is.
Cheers,
Kris.

How to update values in ValueChangeEvent..

Hi Everyone,
I am using Jdeveloper 11.1.2.0.0.
I have a scenario as follows. I have 2 input fields as Password and Confirmpassword.
I wrote a ValueChangeListener for the field Password to do some validations and I wrote another ValueChangeListener for the Confirmpassword field inorder to compare the values entered in both fields.
But here.., In ValueChangeListener event of Confirmpassword field, iam unable to fetch the value of Password field to compare.
The reason is ..., ValueChangeListener occurs in ApplyRequestPhase/ProcessValidationsPhase, and values get updated in UpdateModelPhase, hence values are not updating and unable to fetch in ValueChangeListener event.
In order to update values to the component tree in ValueChangeListener event, i tried using below code
valueChangeEvent.getComponent().processUpdates(FacesContext.getCurrentInstance());
But values are not updating..Kindly suggest me to achieve my scenario. Do the needful. Thanks in advance.
Regards
Alekhya

Hi Nitish...
Thanks for the response...
I tried fetching password field value in Confirmpassword field by 2 ways as follows
1. I binded value of the field as #{backingBeanScope.LoginPage.pwd} and tried to get value using getPwd() method.
2. I fetched Ui component of password inputfield and tried to get value using password.getValue()
By both ways Iam getting null value in ValueChangeListener event of Confirmpassword.
After clicking a button on the page , as usual the setters, ValueChangeListeners are executing and during this sequence..Iam getting value . But my scenario is this validation should be performed bu tabbing out of the field , not after clicking on a button .
autoSubmit property is set to true.
Kindly suggest me to proceed further. Thanks in advance.
Regards
Alekhya

How to update values in the table control at Cat2 transaction,

Hi,
i am working on cat2 transaction, here
i am using the exit_saplcats_006 and updating values at catsdb table, but i want to display this values at the table control in the cat2 transaction.
   can any one provide me solution for this same.
Regards

Hi Suresh
this is actual requirement
in the CAT2.
1. Add a new column for WBS description and derive the value as per the FS
2. Retrieve project number and description and update in the column specified
3. When a service order is selected it should do the same for 2.
4. Finally repeat for the worklist view (which is the section above)
   here i am able to display values at data entry area
for service order and network but not worklist area ?
    updation is not coming, can u plz go throw it..
Thanks
Chinna

Sub: How to update value of a single filed in the standard table without u

Similar Messages

Maybe you are looking for