Displaying Image on the Front screen
Hi all,
I am developing a screen programming.
it has 10 screens.
I have uploaded image using SMW0 transaction code and cl_gui_docking_container, cl_gui_picture classes in the 1st screen.
But it is replicating into all the remaining screens also.
I have called this subroutine in 1st screen PBO module only.
But i am unable to understand why it is getting into other screens.
Please suggest me.
Thanks in advance.
Eswar
Hi,
Once you are naviagting to other screen by calling the following method:
CALL METHOD conatiner_name->FREE
EXCEPTIONS
CNTL_SYSTEM_ERROR = 1
CNTL_ERROR = 2.
Thanks & Regards,
Navneeth K.
Similar Messages
-
How to place an image in database and how to retrieve and display it in the front end
how to place an image in database and how to retrieve and display it in the front end
and to place an image in database and retrieve the image from database using xml
please,help me out.Create a table with a Long RAW Datatype column for storing the Image Column Data.
Create the form based on the table , which by defaults the column with LONG RAW atatype to a Image Item.
You can use Forms Built in function READ_IMAGE_FILE to read a Image file stored on the file system in to the image item.
A save on the form saves the image in the Image item in the long raw column. -
How can I simultaneously acquire and display an image on the front panel using a PCI-1424
Dear friends;
I want to use PCI-1424 , and labview 5.1 to capture the image, But I can not find some functions in labview to capture, display and save the image.Can you be kind to share some examples or provide some information.
Another question is how I CAN display the image in the front panel.
thanks so muchHello yangshang,
Thank you for contacting National Instruments! To acquire images from the 1424 you will need NI IMAQ 2.5.1 or later. This can be found HERE on our drivers download page. One thing to note is that in LabVIEW 5 we only had the ability to view an IMAQ image as a pop up window. This VI is called "IMAQ Windraw". This will pop up a separate window that will display your picture. If you need to view the picture on the front panel you can try saving the image as a file (BMP, JPG, etc) then use the LabVIEW Graphics and Sound VI's to Read a picture file in and then wire the picture to a picture control on the front panel. Let me know if you have anymore questions. Good Luck.
Regards,
Mark T
Applications Engineer | National Instruments -
can anyone please advise me how i can steop any text messages from displaying on the front screen of my apple iphone 5c? Despite my phone requiring a password to get into it and this being locked when the text comes in, the text message is still actually visible on the front screen and could be read by anyone. Can anyone provide me with any resolution to this please?
Settings > Notifications and turn off the ones you don't want.
-
Tcode to enter text in the front screen
I wanted to change the front screen display and the picture when i login to the system
It is like , whenever a user enters the page of entering username and password to login to sap system, it should contain some text to the right side.
After logging in it shoudl show a picture to the right.
Pls let me know the two tcode for the sameHi Balaji,
For creation Own text on SAPGui logon screen plz go thru the note:205487.
for having ur customized picture follow the below steps.
Transaction code - SMW0
X - Binary data for WebRFC application
Hit Enter
Click Execute
Click Settings -> Maintain MIME types
Click the Create button
Fill in :- TYPE : image/gif EXTENSION : .GIF
Click Save
Click Back to the Binary data for WebRFC
Click Create
Fill in :- Obj. name : ZXXXX.GIF Description :
Company Logo
Click Import and specify the filename where your
GIF file is
located.File type is BIN. Finish press the
Transfer button.
If successful, your logo will be shown in the
Binary data for
WebRFC.
Transaction code SM30 - Table/View - SSM_CUST
Click Maintain
Click New Entries
Name Value to be set
START_IMAGE ZXXXX.GIF
RESIZE_IMAGE NO
Logoff and Login again
Reward with points,if you feel it helpful.
Regards,
Laxman -
Symbol of the front screen?!
Hi All,
I'm very new to using BackBerrys and on my Curve a symbol has come up on the front screen next to where new e-mail and message symbols come up. It is yellow circle with white lines crossing over within it. First it started with the number 1 next to it, now it has the number 2 there!
Does anyone know what it means and how to get rid of it?
Cheers
VickyThat's a browser push message if it is yellow.
Is that it at the bottom of this image?
1. Open your main Messages folder.
2. Press the Menu key (left of the trackball).
3. Click on View Folders.
4. Click on Browser Push messages (or WAP Push Messages if it is blue).
5. Read or delete the messsage.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Can't change the phone number that appears on the front screen
My phone used to belong to my mom and I had it unlocked so I could use it overseas. However, her phone number still shows up on the front screen even though I've had 2 different sim cards in it, each with their own number. How do I change it to my current number?
CindyHello chilkootcindy and welcome to the BlackBerry® Support Community Forums.
Sorry to hear you are having an issue with your phone number display on your BlackBerry® Tour™ 9630 smartphone.
When your mother used this BlackBerry did she use a SIM card or not?
This article KB01889 "My Number - Unknown" appears instead of the user's number on the BlackBerry smartphone" will show you possible causes the incorrect phone number doesn't appear on the BlackBerry.
Hope this helps!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Nokia N97 - adding apps to the front screen
I want to add downloaded applications to the front screen. I tap on one of the empty spaces and the home screen and select "download content" this takes me onto the Ovi store website. I've downloaded a couple of applications and they appear in the Applications folder under settings. But when I try and add these on the front screen by clicking "add content" they do not appear in the list.
How can I add them to the home screen? thanksFind the website you want to have as an icon on your "desktop" Find or create the image that you want to use as an icon. Then go to this web site:
http://webclip.us/
and follow the directions. A little complicated at first but you get a great icon/link on your home screen.
gordo -
My iphone 4s has been dropped on the ground, and the front screen is broken. How much will it cost to replace the screen?
You can usually get it replaced by people locally for pretty cheap. You could look on Craigslist or for a phone repair shop close to you and see if they do iPhone 4S screens. But having a 3rd party (Not Apple) replace your screen will void your iPhone 4S warranty, if you still have warranty.
You could also do it yourself by purchasing a front screen on eBay here and following the guide from ifixit.com here. That would be about $30.
Here are your options;
1. Apple - $230 for a brand new iPhone 4S after tax
2. Craigslist - Around $70 for a 1 day wait reaplacment
3. DIY eBay - Around $30 + wait time for shipping
If you do go with the eBay option, make sure you get the whole front LCD display and NOT just the glass. The glass is useless alone. -
Why can only some machines see netboot images at the startup screen?
I have a 10.6.6 server running as a netboot server. I have about 10 images running on the server that consist of a 10.6.6 and 10.5.8 triage partition and a 10.6.6 and 10.5.8 restore image. Now what I have noticed is that newer machines after starting up and holding down the option key will see all the available images.But on some older intel machines nothing will show up after holding the option key down accept the internal drive itself, But if you hold down the N key it WILL boot to the default image.
I have made sure and checked that the ethernet port was working on the older machines. I also made sure that I can see the images from the startup control panel. All machines can see the netboot images from the startup control panel, but older intel versions cant. However I was able to sometimes get the old white and black macbooks to see the images but others not.
Any suggestions as to why some machines will see the images at the startup screen after holding the option key and why some wont?That, most likely, means that you have a fairly large number of images and/or they have very long names.
The number of images that can be displayed is limited by the size of the data packet which contains the NetBoot volume information. Two techniques we use to keep this in check are 1) aggressive purging of outdated images, and 2) use of shorter display names (the one seen in Startup Disk, not the one in the NetBootSP0 folder). -
how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
i don't find a tutorial in adobe tv....
thanks !!The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item. -
How to upload an Image in the front end application
Hi friends,
I have a requirement in the sense, soon after i login into the application with the username and password....
I will be having an file browse item, in which i need only to upload the images, soon after selecting the picture and if i give upload means, the picture has to populate immediately above the browse item in the front end itself......
How to achieve it friends, i dont have idea in uploading the images in the front end itself......
for example: suppose if i want my photo to keep in the front end Soon after i login into the application means, i will select my picture from the file browse item and immediately after giving upload button, i has to come above the browse field in the front end itself.........
Inorder for getting the image in the front, whether i need to create a separate region where the image has to come soon after given the upload button....
help me friends, how to achieve it from the scratch........
Thanks
Vel RsHi peter,
Thanks for the detailed explanation, i have got an link for doing it and this is that
http://www.dba-oracle.com/t_easy_html_db_file_browse_item.htm
While referring that link i couldnt able to understand one thing peter, that is
While creating the Upload button, in the 7th point in the link it is mentioned like
On the Branching page enter &APP_PAGE_ID. for the Branch to Page field and click Create Button. Remember the ending period!i couldnt understand what he is trying to say over there......Can you explain that point by going through that link clearly...Whether he is asking me to create what....
Thanks
Vel Rs -
My iphone 4s fell from the bed and the front screen glass got cracked but the touch screen is working fine, so can i replace just that screen glass?? If not what am i to do ? And how much it might cost me for that repairing??
I don't know. You'll have to ask.
FYI, if the phone was not originally sold in India, it can not be serviced in India. You will have to take it back to the country where it originated. -
My 8530 does not display images in the browser
My bb 8530 a few weeks ago suddenly stopped displaying images in the browser. Browser options are set to "display images". I've power cycled many times, even reset and wiped, but still no images in browser. How can I fix this? Thanks.
hi i have noticed the same problem. also with Chrome and FP ver 11.5.31.2and Firefox and Safari with FP 11.5.502.110
it seems that MovieClipLoader class not returning onLoadInit event. I use to add a fadein function on loadInit to fade in the loaded images. with the latest Flash PLayer versions this is not activated so you cannot see the loaded images.
I have tested this on 3 different systems and the problem is the same. I have not updated my FP for IE. There, the older FP still works well.
test systems
Mac OS LionSafari and FP 11.5.502.110 --- DOES NOT WORK WELL
Windows 7 64 bit
chrome 23.0.1271.95 with FP 11.5.31.2 - DOES NOT WORK WELL
Firefox 16.02 with FP 11.5.502.110 - DOES NOT WORK WELL
IE 9 with FP version 11.4.402.287 - WORKS
Windows XP SP3
Firefox 16.02 with FP 11.5.502.110 - DOES NOT WORK WELL
IE 8 wth FP 11.4.402.287 - WORKS
chrome 23.0.1271.95 with FP 11.5.31.2 - DOES NOT WORK WELL -
Hi i am new to labview
I want to extract data from a text file and display it on the front panel.
How do i proceed??
I have attached a file for your brief idea...
Attachments:
extract.jpg 3797 KBRoopeshV wrote:
Hi,
The below code shows how to read from txt file and display in the perticular fields.
Why have you used waveform?
Regards,
Roopesh
There are so many things wrong with this VI, I'm not even sure where to start.
Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
Not using Read From Spreadsheet File.
Use of local variables to populate an array.
Cannot insert values into an empty array.
What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
Also, how does this answer the poster's question?
Maybe you are looking for
-
IOS8 doesn't render CSS box shadows correctly
According to an article at "caniuse", iOS7.1, 8, and 8.1 are supposed to support the CSS3 property box-shadow. However, I have an html file to which I could direct you which shows that this is not the case. The file I have is simple-minded, containin
-
Can I obtain the date of the exe and display it on the fropnt panel?
Hello, Is there a way that a Labview program can display the date of the exe and display it on the front panel? I am aware of the version info on the application builder, but I did not see a way to get the date when the exe was created. Regards,
-
Hello Everyone, When ICF is generating standard error message (e.g. ABAP WebDynpro app fails to be opened within a timeout), it uses German language for all languages other then English. All the languages in question have been defined in SMLT, supple
-
Report naming conventions?
what are these report naming conventions that show/get prefixed to items etc. by default in the object navigator. 1) Q_ is Query 2) G_ is Group 3) M_ is ? 4) R_ is ? 5) F_ is ? 6) B_ is ?
-
Any Java GUI Builder, please?
Hello everybody! I have to develop a GUI in Java and I am totally rookie on this (Java & GUI development). What I would like to know is whether there is a kind of GUI Builder for Java with free license. I mean, a program which makes me easier to choo