Displaying legends on the bar in chart

Hi,
In webi report, can we display the value of the legend directly on the bar instead of displaying it on the x- axis or y-axis
Requirement is highlighted in the attached image.Is it possible in webi reports? Any work around?
Thanks,
Divya

Hi Divya,
Please try following steps to achieve desire output :
1. Right click on chart -> Go to “Format Chart”.
2. In Global Tab > Area Tab > Select “Area Display” > Check the option called “Data Label Displaying Mode” in “Data Values.
3. Next Step > Go to “Data Values” > Set Data type to “Label”.
4. Output:
Regards,
Veer S.

Similar Messages

Display value on each bar in chart

Hello,
I've a chart, in which I need to display the values for each bar.
Per default, only a approximative value is displayed on the Y axis.
Many thanks in advance.
Alain.

In the display settings of your flash chart, you have the following options:
Show Hints
Show Labels
Show Values
Click those on and see what you get.
You can also use try to use a custom XML, which will give you a possibility to manualy change the generated xml for you chart.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Heads up display for viewport pixel size while dragging the bar!

Would be a great feature to display the active viewport size in a heads up display while dragging the bar so we can accurately determine the size of viewport to select. Love this program and can't wait for Version 1 and all that's to come!
Tom

Hi Thomas! This is a good idea! Thanks for this!

How to suppress bars on chart and customize legend text

I am new to Crystal Reports and have a couple of questions about bar charts. I am using Crystal Reports XI Release 2 with Developer Studio 2005 (C# .NET) and SQL Server.
I have a very simple report that sums up the values of 14 different database columns. There is a also a bar chart to display the summed values.
My questions are:
1. Based on some user preferences, I may not want to display all 14 values. I found how to Suppress fields on the report, but cannot figure out how to prevent them from appearing in the bar chart as well.
2. Can I customize the names of the bars in the legend?
Any help will be great appreciated!

Please re-post if this is still an issue to the .NET Development - Crystal Reports Forum or purchase a case and have a dedicated support engineer work with you directly

Chart doesn't show the bar of the value

I added a chart in my SSRS report and added the value fields and the category groups and tried to preview. Instead of showing the bar for the sum of the data it is saying "No Data Available"
I added a table and used the same value for the column and it displayed the count, so I am not sure what is wrong with the chart that it's not showing any data.
Please help.

One way to check whether or not the ScriptListener Plugin is working properly is to see if a) it is creating/updating the ScriptingListenerJS.log file on the Desktop and b) if that file actually contains anything. For both Eran and Maaskeikke, it sounds like the log file *is* being created but that it is empty. If that's the case, it seems like this might be an issue with the Script Listener Plugin, and I'm not sure exactly what to recommend. I'll ask the folks who wrote the Script Listener if they have any thoughts and post an update on this forum.
Here's one other thing to note: sometimes, the Script Listener does not write out instructions immediately after they are demonstrated in Photoshop. In my experience, if you save the document at the end of your recorded demonstration, that often "flushes" all instructions to the Script Listener log file. Please let me know if this helps.
Thanks!
Wil

Need Help in displaying data labels at the top of the bars in CFCHART

Hi,
I have a cfchart with two line series and one bar. I want to display the data values at the top of the bar and the line series. Below is the XML I am using:
<cfsavecontent variable="chartStyle">
<?xml version="1.0" encoding="UTF-8"?>
<frameChart is3D="false" isMultiline="true">
          <frame xDepth="12" yDepth="11" outline="black" stripColor="light_gray">
               <background maxColor="black"/>
          </frame>
<yAxis scaleMin="0" scaleMax="30">
               <labelFormat pattern="###"/>
<parseFormat pattern="###"/>
<labelStyle orientation="Horizontal"/>
<titleStyle font="Arial-11-bold" isMultiline="false"><![CDATA[
#Vehicles       ]]>
</titleStyle>
</yAxis>
<yAxis2 scaleMin="0" scaleMax="30">
               <labelFormat pattern="###"/>
<parseFormat pattern="###"/>
<labelStyle orientation="Horizontal"/>
<titleStyle font="Arial-11-bold" isMultiline="false"><![CDATA[
Profitability       ]]>
</titleStyle>
</yAxis2>
<dataLabels foreground="black" font="Arial-12-bold"/>
<legend allowSpan="true" equalCols="false" halign="Center" isMultiline="true" placement="Bottom"><decoration style="None"/></legend>
<elements place="Stacked" drawOutline="false">
<series index="1" place="Stacked">
<dataLabel style="value"/>
</series>
          <series index="2" place="Stacked">

</series>
<series index="3" place="Stacked">

</series>
<series index="0" place="Stacked" shape="Line" isSecondAxis="true">
<dataLabel style="value"/>
          </series>
<series index="1" place="Stacked" shape="Line" isSecondAxis="true">
<dataLabel style="value"/>
          </series>
</elements>
          <table>
               <heatmap isEnabled="false" minLevel="0.0" maxLevel="0.0"/>
          </table>
          <popup background="white" foreground="black"/>
          <paint isVertical="true" min="26" max="76"/>
          <insets right="5"/>
</frameChart>
</cfsavecontent>
Can anyone please tell me what is the mistake i am doing.
Thanks in advance,
Jeevan Pulugu.

Hi,
Probably you need to find a way to enhance the standard code.
But make one thing sure that the code (included bu you) gets fired only when that specific report is being executed. Else it may harm the standard functionality.
Hope this helps you.
Regards,
Tarun

SSRS- Drill down to sub report of a bar chart on click on a particular color of the bar

Hi,
I have a bar chart which can have many colors on each bar, Now if i click on a bar, i am getting all the data related to that particular bar. Is it possible to click only on a particular color and get related data instead of whole bar?
To be more precise, in the below image if i click on 16/6/2013 bar, i am getting all the data related to the bar, but is it possible to click on red and green colors of the bar separately and get the relevant data? Any help is greatly appreciated.
Kruthi Hegde

Hi Kruthi,
In your case, you can use “Go to report” property to solve the issue.
Suppose we have a dataset (DataSet1) in main report and subreport with following fields: Months, DateTime, Amount. We can according to Months and DateTime fields to display the subreport. Please refer to the steps below:
Subrepot:
Add dataset (DataSet2) in the report with Months field.
Add dataset (DataSet3) in the report with DateTime field.
Add two parameters in the report. Please refer to the following Available Values:
Months:
Dataset: DataSet2
Value field: Months
Label field: Months
DateTime:
Dataset: DataSet2
Value field: DateTime
Label field: DateTime
Add filters in the tablix.
Main report:
Right click the bar chart, select Series Properties.
Click Action in the left pane, select “Go to report” option.
Specify the corresponding report.
Click Add icon to add parameters to run the report:
Name: Months Value: [Months]
Name: DateTime Value: [DateTime]
(Note: If we want subreport display these data which is only relevant with color, we can delete DataTime parameter in the report.)
If you have any questions, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

How to I change the colour (or hightlight) some of the bars in a bar chart in Keynote?

I am using Keynote 6.2.2. I have prepared a chart which displays the quarterly income (as a points on a line) and expenditure (as bars) for the past 3 years. I wish to highlight the Q1 expenditure bars for comparison reasons. At the moment all the bars are coloured red (and the income lines, blue). How can I either change the colours of just the Q1 expenditure bars for each year?

You need to change to; plot columns:
select the chart
click the Edit Chart Data button
click the plot columns button (arrowed)
select the chart then select the individual bars to be changed:

Display range in 3d bar chart

Hi,
I'm creating a 3D chart (top right icon in the menu).
I want to enter a range (like 34-68) for the first bar instead of a whole number like 68 and then have the 34-68 range display only... I don't want to have the bar start at 0 and go up to 68. Also, it seems that I can't enter a range in the chart editor like so: 34-68 because it just translates that to -3468. Is what I'm trying to accomplish possible in Keynote?
Thanks,
Matt

I think I've answered my own question here so instead of just deleteing this post, I'll reply to save the answer for anyone else looking to do this.
Use the segmented bar chart and set the lower portion to use "none" for the fill color and the value in the chart editor to the number just lower than the beginning number of the top segment's low value. For example, if the bar needs to show a range between 75 - 83, set the lower segment's value to 74 and color to none, and then set the upper segment to 8 and whatever color you want.

How do I add the Displays icon to the Menu Bar?

In prior OS on my iMac, I was able to add the Display icon to the Menu Bar, making it a quick fix to adjust the resolution. That option no longer appears in the Display section of System Preferences. I am using multiple displays. Could that make any difference? Any suggestions?

http://displaymenu.milchimgemuesefach.de/about.html

How to change the bar chart rendering image format in SSRS

Hello all,
I am working with SQL Server 2008 R2 and I have a SSRS bar chart report, when the report got rendered over online or if the take Export (PDF and PPT), the image is in png format always, which is taking too much of time to execute the report in case of large
data.
Can, It be possible that the rendered image is in jpeg format instead of png.
If Yes, please share the appropriate steps to follow:
Thanks in advance
Pankaj Kumar Yadav-

Hi Pankaj067,
According to your description, you want to change the bar chart rendering image format as JPEG format when previewing the report or exporting to a PDF file .
In Reporting Services, the chart rendering image format is PNG by default. It’s a by-design behavior. And it doesn’t open any API for us to change the image type when exporting a chart to a format. So in your scenario, your requirement can’t be achieved
in Reporting Services currently. I would recommend you submit a feature request to Microsoft at this site:
https://connect.microsoft.com/SQLServer. So that we can try to modify and expand the product features based on your needs.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

How can I automatically "retract" all windows from my Thunderbolt display back to my MacBook Air when I disconnect the display, esp if the Thunderbolt is the desktop with the white menu bar?

I am in and out of my office with my MacBook Air. I would like to set it up so when I plug in my Thunderbolt display in the office, the Thunderbolt display has my desktop, menu bar and the open windows. If I set the Thunderbolt display to mirror by MacBook Air it adjusts to the lower resolution of the MacBook Air, which is a waste of a cool monitor. I can set it up as an extended desktop and drag the white menu bar to the Thunderbolt display so it displays my desktop but if I then disconnect my MacBook Air, the menu bar is absent and all the windows that were seen on that display are absent, as if it I was still attached to the larger display. The only way around this is to go to Thunderbolt display preferences, drag the white menu bar back to the smaller display and manually drag all windows to the smaller display before disconnecting. Doing this multiple times per day is a real pain. Is there a way to set my MacBook Air to recognize when it is attached to the Thunderbolt display and automatically my desktop and all open windows to it and then do the same process in reverse when I unhook it?

It's definitely not supposed to work like that...when you plug the display in, it should just turn on and adjust your displays. It works like that on my MBP. Kind of a silly question, but do you have the MagSafe from the display plugged in your MBAir too? Thats a requirement. Beyond that, it should "just work."
Not sure if there is some setting to enable...i haven't seen it. Call to support?

Is it possible to change the colour of the bars in a chart on the iPad?

I'm using keynote for iOS and I'm trying to pick the bar colour for my charts. I understand that the default settings will change the colour for each new series but I have a few charts all with a single series and I would like to change the colours along the way. Below is an image from my presentation, basically I'm looking for guidance on how to make the blue bars into red bars.

Set the grid background color black and set the GridItem background color something else.
Here is an example.it is better to set this kind style attributes in css
<mx:Grid backgroundColor="#000000" verticalGap="0">
   <mx:GridRow>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
   </mx:GridRow>
   <mx:GridRow>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
   </mx:GridRow>
</mx:Grid>

How to display table range navigation bar at the bottom of the tr table i

Hello,
While I am using trinidad, I have to face a critical issue. Can I display table range navigation bar at the bottom of the <tr table> in Trinidad? and remove the range dropdown list, only show the "previous" and "next" link? The project is critical on the UI, this problem is very small but has to be fixed? Does anyone have any ideas？

Difficult to do? No.
<ul id="bottom-nav"><li><a hef="whatever.php">whatever</a></li><li class="last"><a hef="whatever2.php">whatever2</a></li></ul>
With this CSS -
ul#bottom-nav {
     list-style-type:none;
     overflow:hidden;
     width:70%;
     margin:0 auto;
ul#bottom-nav li {
     float:left;
     padding-right:10px;
     border-right:1px solid #FFF;
ul#bottom-nav li.last {
     border:none;
ul#bottom-nav a {
     /* your styles here */

How do I change the display order in the VPN menu in the status bar?

Hello,
How do I change the display order in the VPN menu in the status bar?
(in the drop-down menu from this icon) ->
Thanks.

Hello. Perhaps this is because you are trying to arrange the order of many VPN services, since only one VPN service can be selected at once in System Preferences. In my original post, I did not mean that; I meant that I wanted to arrange the order of VPN configurations within a VPN service. In this screenshot, I have one VPN service only:
And in the following one, it is shown that there are more than one VPN configurations within that VPN service:
Furthermore, it was the order of VPN configurations that I wanted to change, not the order of VPN services. If you are trying to change the order of VPN services, I do not have a solution.

Displaying legends on the bar in chart

Similar Messages

Maybe you are looking for