Display value on each bar in chart

Hello,
I've a chart, in which I need to display the values for each bar.
Per default, only a approximative value is displayed on the Y axis.
Many thanks in advance.
Alain.

In the display settings of your flash chart, you have the following options:
Show Hints
Show Labels
Show Values
Click those on and see what you get.
You can also use try to use a custom XML, which will give you a possibility to manualy change the generated xml for you chart.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Similar Messages

Redirect if record exists is displaying value in address bar

I setup a simple login page to insert record if it doesnt
exist, and
redirect if it does..
since its a login page, i dont want the values past in the
address bar as if
it was a querystring....
i dont recall this occuring in past setups like this..
here is an example of what i see in the address bar
http://corp01/thankyou.asp?requsername=123456789
the form i have setup to do this is set to the following:
Method = POST
Enctype is blank
Action = <%=MM_editAction%>
Target = empty
Class = empty
Is there anyway to prevent this from displaying in the
address bar?
Since the live form will be setup behind a https:// and
security in place..
i want to make sure i code correctly now before we have the
site live...

so the problem is here if the option is equl No categories
found I want to go by id but by subId
so it should look like this
details3 = new
Spry.Data.XMLDataSet("prog.cfm","progs/prog[id="+window.activeRecord+"]",
{useCache:false, loadInterval:1660});
Also I tried to write some code but i do get the wrong result
function hielo3()
if(window.activeRecord2 == null || window.activeRecord
==null)
alert("You must select a category or a subcategory!Please go
back to the category Tab");
setTimeout('tp1.showPanel(1);',0);
return false;
} else if (window.activeRecord2="No subcategories found"){
details3 = new
Spry.Data.XMLDataSet("prog.cfm","progs/prog[id="+window.activeRecord+"]",
{useCache:false, loadInterval:1660});
details3.addObserver(myTab2Observer2);
} else {
//here make your other query to get the details of the
selected option! I am reusing the previous one.
details3 = new
Spry.Data.XMLDataSet("prog.cfm","progs/prog[subId="+window.activeRecord2+"]",
{useCache:false, loadInterval:1660});
details3.addObserver(myTab2Observer2);

Displaying legends on the bar in chart

Hi,
In webi report, can we display the value of the legend directly on the bar instead of displaying it on the x- axis or y-axis
Requirement is highlighted in the attached image.Is it possible in webi reports? Any work around?
Thanks,
Divya

Hi Divya,
Please try following steps to achieve desire output :
1. Right click on chart -> Go to “Format Chart”.
2. In Global Tab > Area Tab > Select “Area Display” > Check the option called “Data Label Displaying Mode” in “Data Values.
3. Next Step > Go to “Data Values” > Set Data type to “Label”.
4. Output:
Regards,
Veer S.

Pie chart legend should display values and percents

Hi All,
Can any body suggest me how to display values and percent in pie chart legend.Thanks in advance.
Edited by: 997414 on Apr 1, 2013 11:25 PM

Hi,
I used this tag : <SliceLabel textType="LD_TEXT_PERCENT"/>
My full graph;
chart:
<Graph depthAngle="50" depthRadius="8" pieDepth="30" pieTilt="20" seriesEffect="SE_AUTO_GRADIENT" graphType="PIE"><LegendArea visible="false" automaticPlacement="AP_NEVER" position="LAP_BOTTOM" /><LocalGridData colCount="1" rowCount="{count(.//DSYATIRIMDAGILIMANA_ROW)}"><RowLabels><xsl:for-each select=".//DSYATIRIMDAGILIMANA_ROW" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"><Label><xsl:value-of select="RAPORAD" /></Label></xsl:for-each></RowLabels><DataValues><xsl:for-each select=".//DSYATIRIMDAGILIMANA_ROW" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"><RowData><Cell><xsl:value-of select="ORAN" /></Cell></RowData></xsl:for-each></DataValues></LocalGridData>
<SliceLabel textType="LD_TEXT_PERCENT"/>
</Graph>
I hope, It helps you since I figure it out in very very hard way.
This is the main reference : http://www.oracle.com/technetwork/middleware/reports/graph-dtd-technote-2-094743.html

Display value in Bar chart conditionally

I've a chart with Bar-Vertical Stacked type. In one bar 7/8 stacks are coming, some of value 1000 and some of very small values like 2, 5,6 etc. For each of these small bars when I'm displaying value in center position with markerTextPlace="MTP_CENTER", it becomes clumsy.
In this case, I want to only show the slice in vertical bar but not to display value if value<10.
How this condition can be checked to view value.
Please suggest. Kind Regards.

Can anyone please suggest.
Regards.

WAD Display value in bar of a bar chart

Hello group,
I'm trying to display the values of every bar in a bar chart and can't fine the way to. I'm sure it's quite easy and can't find the solution. I've searched the forum and only found a link on SAP help which explains how to do it on individual bar but not all of them (Series --> Series1 --> Show Labels, same for Series2 until Series5 etc etc...).
I can't find any options for all Series. Any help would be appreciated. Thanks.
Cheers,
John.

Figured it out. It seems that this option is only available in Wizard mode, not when using the refine... Oh well...

Display Value for a Horizantal Bar Chart

My Horizontal Bar Chart is not displaying values that are less than 6 figures since most of the column values are greater than 7 figures. it won;t show even when I hover over the column bar.. Any idea on how to display them.
-Sam
BOBJ XIR2

Sam,
I have not come across such scenario...anyways..let me give it a thought and will let you know if i find some solution..:)
Undoubtedly i still say it as a powerful tool when compared to any other dashboard development tool. Most importantly, anyone can develop a dashboard and show their analysis in visualization in minutes... that is the beauty of Xcelsius
I understand some important features are still missing and i am sure product development team will work towards it. No tool is perfect.. It is only people like you and me who will be able to make it better by suggesting different ways to improve
Cheers,
-Anil

How to display values on top of each bar in graph???

Hi Everyone,
My Jdev version is 11.1.2.3.0.
I have developed one ADF BAr Graph </dvt:barGraph>. Everything is working fine.
How can i show the values on top of each bar in my graph???
And how can we show arrows left arrow right arrow top arrow bottom arrow like arrows in keyboard in ADF??? Example: Text1 right arrow Text2 right arrow Text3
Any suggestions will be really helpful.
Thanks.

I'm not sure if that's what you're looking for, but you can display values by using markerText tag:
<dvt:barGraph...>
<dvt:markerText rendered="true">
      <dvt:y1Format>
        <af:convertNumber type="number"/>
      </dvt:y1Format>
      <dvt:graphFont id="graphFont4" size="20"/>
</dvt:markerText>
</dvt:barGraph>
About the other question, have you tried to use unicode characters? Right arrow, for example is "⇨"

Displaying X axis values in iChart - Bar

Hi,
i want to display values in x axis in iChart- Bar type. ie if my Database have 2 fields say time and no, i want to display no value in y axis and corresponding time in x axis. how can i do?
anyone please help me where do i get manual for display templates in very briefly?
- senthil

Hi senthil,
                  Go through this help
ValueColumns   : This controls which data columns in a query will be used as the values to plot on the chart.
LabelColumns   : This controls which data columns in a query will be used to create "virtual tag names" when the chart is drawn. This set of parameters is typically not needed when the query source is a Tag connector, but is required when the source is a SQL or Alarm connector
DescriptionColumns : This controls which data columns in a query will be used to create "virtual tag descriptions" when the chart is drawn. This set of parameters is typically not needed when the query source is a Tag connector, but is required when the source is a SQL or Alarm connector.
DatalinkColumns : This controls which data columns in a query will be used to create "datalink" items associated with each item in the legend. This is convenient means of associating special column values such as a part code, downtime ID, or other internal key field that has no meaning to the end user but is valuable when cross-correlating or linking with other applets. The first mapped Datalink column is also used by the MouseTracking feature.
AxisValueColumn : This is used to create explicit X-Axis values from a returning column in the query
AxisLabelColumns : This controls which data columns in a query will be used to create X-Axis labels associated with each data point in the chart. This is supported only with barchart-style charts (Bar, GroupBar, StackedBar, FloatingBar, and Variability Bar).
MinRangeColumn : This controls which data columns in a query will be used to create the minimum pen scaling range for the Y-Axis legend.
MaxRangeColumn : This controls which data columns in a query will be used to create the maximum pen scaling range for the Y-Axis legend.
IncludeValueInLabel : This controls whether the value column names will be merged with the LabelColumn column names when generating "virtual tag names".
FieldSeparator : This controls the character that will be used when appending multiple string values in the creation of "virtual tag names".
If you didn't get the result, write here
regards
Vijaya

Display values on a chart

hi,
in excel, you can display the value of a bar in a chart right on the chart.
i've looked in cx 4.5 for the equivalent option, but did not see one.
after looking at some of the chart samples, i noticed that i did not see this
am i correct that this is not an option in cx?
thank you
tracy

HI, Tracy
In CX 4.5 Pro the option is in the following Path
--> Double Click on the Chart from the Properties Window select the Appearance tab
--> Now from the Title Button you can select or unselect the Show Legend Value
Now the problem is that you want to display the Values but it display the Numbers as if there are categorize 1 to 9 than it show the Number from 1 to 9 and color of that Category in the Chart.
But we can do a trick through you can achieve your Requirement.
Like Just right side of you Chart Place a List View or Table view and Point the display Values of that Control to the Values you are displaying in the chart.
In this way you will be able to display the Category name and amount in the right side or any where you want.
Hope this help you to solve out your problem,
Please Reply if any Issue,
Kind Regards,
Faisal

Showing values of each slice of pie chart

How to display the values of each slice of pie chart in the chart without selecting each legends like a pointer showing values of each slice ?
Edited by: Rimily on Aug 4, 2011 9:18 AM

Hi,
Please go through below Thread may be usefull
[Mouse Rollover]
hope it helps!!
Regards,
Manoj Bilthare

Showing 0 value in vertical bar chart

Hi,
is it possible to show the 0 value in a bar chart using Show data labels "Always"? By default it is suppressed.
Zero is a success value in quality reporting and my clients want it to be visible, so they do not confuse it with "no data delivered". Is there any way to highlight Zeros in a bar chart?
Mny thx Thomas

We had the same issue and used a work around. Use case when value = 0 then 'Some value of choice' and it will be seen on the chart.
Let the client know that 'Some value of choice' on the chart means 0. Sounds ridiculuos, but we did not find any other alternative.

How to fix the width of each bar in the Bar chart.

Hi,
In BO design studio 1.3 is there any way to make each bar in the bar chart with fixed width.
Thank You,
Palani.

Hi,
if you are using a grid layout the witdht of the bars is not really fixed.
When you adjust the screen size, the charts and the bars in each chart rezise according to the size of your screen.
But that is one of the advantages using grids.
Otherwise the size of the chart and the bars is fixed but as far as I know there is no option to manually adjust the size/width of each bar.
Regards,
Steffen

How can I display a specified row from a chart in a 2nd chart in Numbers?

I have a chart in Numbers '09, which contains tasks with their due dates. This chart is rather large and is divided into several categories (i.e. home, work, taxes, etc.). Each row in the chart has a task name and due date in addition to other information in columns. Since it has many tasks and they are divided into categories, it's difficult to check what tasks are due this week. I have been trying to add a small chart to display only the task name and due date from all categories due in the next 10 days.
I assume I should add a chart in the work sheet and use some string of functions to find tasks due this week, and copy them to the 2nd chart. If someone could suggest a string of functions, or tell me an easier way to do this I would be grateful.
Jim

Hi Jim,
Welcome to Apple Discussions and the Numbers '09 forum.
Using the correct vocabulary would make your request much easier to read. A "chart" in Numbers is a bar graph, a line graph, or a pie chart.
What you're referring to as a "chart" is a "table."
So:
You have a table listing tasks and their due dates, plus other information (presumably all separate columns).
You want a separate table listing only those tasks whose due date falls within the next ten days.
Here are two ways to make those tasks stand out. The first uses conditional formatting to change the fill colour of the Date cells on the first table; the second uses an index and VLOOKUP to transfer the urgent tasks to a second table.
The conditional formatting rules shown are applied to all cells in column A. Dates within 5 days of "today" (January 13, 2011 in the example) get a red fill and white type; dates within 10 days a yellow fill.
The same rules, with effective periods reduced to 2 and 4 days, are applied to dates in the Urgent table below.
Here a column is added to the left of what was column A to hold an index created by the formula below, entered into the new cell A2 and filled down to the bottom of that column. As noted in the header cell, this column may be hidden.
=IFERROR(IF(DATEDIF(TODAY(),B,"D")<11,DATEDIF(TODAY(),B,"D")+ROW()/10000,66000), 66000)
The formula provides a unique numerical value in each row where the date is less than 11 days from today, and a large fixed value in rows where the date is before today or more than 10 days away.
On the second table, "Urgent" the formula below, entered in A2 and filled down the full column and right to column B transfers the dates and tasks due within ten days from the table "All tasks" in order of 'days to complete,' with the earliest ones at the top of the list.
=IF(SMALL(All tasks :: $A,ROW()-1)<66000,VLOOKUP(SMALL(All tasks :: $A,ROW()-1),All tasks :: $A$2:$C$21,COLUMN()+1,FALSE),"")
Descriptions of all the functions used, including examples, may be found in the iWork Formulas and Functions User Guide. Details on Conditional formatting may be found in the Numbers '09 User Guide. Both guides may be downloaded through the Help menu in Numbers '09. Both are recommended.
Regards,
Barry

SP2010: Different colors for chart bars in Chart Web part with single data series?

Hello,
I've been asked to create a chart for visual display and summary of Status values within a SharePoint list of job positions. The list of positions includes a Status field with the only values being Open and Closed. I created a page that shows the list, and
at the top I inserted a Chart Web part that displays two bars - one showing the number of Open positions and one showing the Closed positions. Because I was having difficulty getting the totals for each Status value to show up in the chart, I followed
the instructions at
http://highbrowse.wordpress.com/2012/07/04/chart-counts-from-sharepoint-lists/ and pointed my chart at the new "Status values" list - this worked well to display the sum counts for each of the two Status values in separate bars.
This was all fine and good, except that because I am only using one data series for my chart, both of the bars (for Open and Closed) show up as the same color. I've been asked to make them different colors but cannot figure out how to do so. Can someone
provide guidance on how I could make the two bars different colors? Thank you so much.
cheers

Hello,
as far as I know, the chart web part does not have any settings to change the color of individual data points or plot data points of a series in different colors. If you only have two values in the series, you could use a pie chart instead of the column
or bar chart. In a pie chart, the different slices have different colors.
cheers, teylyn

Display value on each bar in chart

Similar Messages

Maybe you are looking for