Displaying messages on a details page

i have a website for musicians each musician has their own
details page that displays all their details i want to create a
section that will display messages to the band and the band can
answer these comments and they will be displayed on the same page
it will be like a guestbook for each musician how do i do this do i
just need to link the database tables or what? im not sure if
anyone can help please let me know. cheers

Since it sounds like you're using a standard relational
database, then there should be a field in the first table that ties
to the second table. Lets call that field name1 for demo's sake.
In the 2nd Recordset (switch to advanced mode so that you can
put it in manually)
SELECT * FROM TABLENAME2
WHERE name1 = DBNAME.TABLENAME1.name1
ORDER BY record_number (or a date field) DESC
Another way to do it is to set it up in two pages. set up the
first page using your first recordset and bind it into a form. then
pass the name1 value in that form to the second page (GET not POST)
and you can set up your second page's recordset to filter (name1 =
URL Parameter = name1 (the passed field from the first page) that
will pull all info based on the info passed from the first
recordset and display it.
Cheers
Chuck

Similar Messages

  • Missleading error message for master-detail page

    Hi,
    I have created a master-detail form/page with the wizard. In my example DEPT is master and EMP is detail.
    1) run the page and change the value of ACCOUNTING to ACCOUNTINGX and also the salary of KING to 8000
    2) Press the "save" button in the Emp detail region
    KING gets updated, the department not, but that's ok because the processes are defined that way that they are bond to the save buttons in the region. I don't know if an end-user will also understand that the values in the upper block are not updated, but that's not the question I want to ask here.
    Go back into the Builder and add a condition onto the JOB report column of type "Value of Item in Exp 1 = Exp2" with the values P5_DNAME and ACCOUNTING => only display the JOB column for department ACCOUNTING
    1) run the page and change again the value of ACCOUNTING to ACCOUNTINGX and salary of KING to 9000
    2) press the "Save" button in the Emp Detail region
    Now the user gets a
    Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "BF9210E6FFE37B63780258451587AB5D", item checksum = "C2FF65B2A2A6F0216971C6EA4EBFEA41"., update "FORUM_EXAMPLE"."EMP" set "EMPNO" = :b1, "DEPTNO" = :b2, "ENAME" = :b3, "JOB" = :b4, "MGR" = :b5, "SAL" = :b6
    Error Processing not possible.
    That error message is really miss leading. I assume APEX does this check to "protect" that the condition doesn't change, because that would also result in a renumber of the Apex_Application.g_f0x columns.
    BTW, wouldn't it have made more sense to always map the Apex_Application.g_f0x array to the position it has in the Report Attributes and not changing the array field number when the column isn't displayed because of a condition? That makes validation/processing code unnecessary complicated, because the condition logic has to be duplicated :-(
    But back to my original problem, based on this error message how should an end user know that he is not allowed to change anything in the upper block?
    If you want to try it by yourself.
    http://apex.oracle.com/pls/otn/f?p=12820:4::::::
    Want to check the code:
    Workspace: FORUM_EXAMPLE
    User: guest
    Password: guest
    Did I understand something wrong? Any comments welcome!
    Patrick
    Check out my APEX-blog: http://inside-apex.blogspot.com
    Message was edited by:
    patrick_wolf

    <noscript> JavaScript not supported. </noscript> <script type="text/javascript"> <!-- function genList_f31_0() {            w = open("wwv_flow_utilities.gen_popup_list" +                        "?p_filter="  +                        "&p_name=" + escape('f31') +                        "&p_element_index=" +  escape ('0') +                        "&p_form_index=" + escape('0') +                        "&p_max_elements=" + escape('') +                        "&p_escape_html=" + escape('') +                        "&p_ok_to_query=" + escape('YES') +                        "&p_flow_id=" + escape('103') +                        "&p_page_id=" + escape('3') +                        "&p_session_id=" + escape('2618395222296971') +                        "&p_eval_value=" + escape('') +                        "&p_translation=" + escape('NO') +                        "&p_lov=" +                        "&p_lov_checksum=" +                        "&p_item_id=" + escape('1438926468993754'),                        "winLov",                        "Scrollbars=1,resizable=1,width=400,height=450");            if (w.opener == null)              w.opener = self;            w.focus();          } //--> </script><span class="lov"><input type="text" name="f31" size="250" maxlength="2000" value="3" onchange="f_set_multi_items_tabular(this.value,'1')" id="f31_1" /><a href="javascript:genList_f31_0()"><img src="/i/list_gray.gif" width="13" height="13" alt="Popup Lov" alt="List" style="vertical-align:middle;" align="middle" /></a></span>

  • Have a gap in detail of first page and not display group footer on each pag

    Please help me about Memo field in SubReport in CrystalReportXI. I have a SubReport that need to display pageheader, detail, page footer, and  in detail of subreport contains memo field and set the property of this text box to "Can Grow" = Yes .However, CrystalReportX does not support to display  pageheader, pagefooter in SubReport. So. I have created a formular FakePageHeader that has code  as
    "WhileReadingRecords;
    true"
    and group in this field and checked option repeat group header on each page and right click Section Expert->check print at Bottom of page for Group Footer.
    This problem is when I preview Subreport. It display text in group header and a gap in detail of first page and view next page, the subreport display right data of memo field. But the report still not display group footer on each page.
    How do I can remove a gap in first page and display group footer on each page?
    Thanks

    in subreport in format for the memo field uncheck keep object together.
    You can not force group footers to repeat on each page.
    I have not tried this but you might be able to capture the data you want to show in SR page footer and display in main report page footer, using shared variables.
    Ian

  • Notification Detail Page is not displaying

    Hi All,
    I have a requirement of creating a read only workflow admin responsibility. For that I have followed the below steps.
    1. Set 'Workflow Administrator Web Applications' as the Workflow Administrator from administration tab.
    2. Create a grant with the below details.
    Grantee Type: All Users
    Responsibility: Workflow Administrator Web (New)
    Object: Workflow Items
    Data Context Type: All Rows
    Permission Set: Business workflow item permission set
    I have done this for viewing the workflow owned by all users and followed the ID 1328447.1 for doing this.
    Now everything is working fine, but Notification Detail page is not displaying. It is loading for a long time and
    giving the errors, ('The connection was reset' in Mozilla and 'Page Cannot be Displayed' in IE).
    Notification detail page will come when I remove this Grant, but it will display only the workflows owned by
    that particular user. So this grant is a mandatory component for me.
    The issue is there even for the admin responsibility(Workflow Administrator Web Applications) when assigning
    this grant.
    Can anyone help me on this to resolve this issue.
    Thanks & Regards,
    Charls

    Hi Helios,
    Thanks alot for replying. Below are the answers to your queries.
    1. EBS Version : 11.5.10.2
    Client Version: 11.2.0.1.0
    2. Browser version:
    IE: 7.0.5730.13
    Mozilla: 14.0.1
    3. I have tried it in different machines(4 machines). There also I am facing the same issue.
    Hoping for your valuable comments.
    Thanks & Regards,
    Charls

  • Display additional fields in Service Request detail page

    Hi All,
    Is it possible to display some fields like Account Type, Contact Type etc. in Service Request detail page?
    Service Request Field Edit page only allows to add default value to the newly created field, that's not the result that I needed.
    Any suggestions are appreciated.

    Bruce,
    There's a function called joinfield value that will allow you to bring across information from those pages, if you email me (alex.neill@{see profile}) I'll send you the document.
    cheers
    Alex

  • When I want to create apple account in billing and card details page I am stuck and get the message contact itune store support to complete this transaction. Need to know what to do as I can't creat apple id

    When I want to create apple account for my new iphone5 with different apple id than this  in billing and card details page I am stuck and get the message contact itune store support to complete this transaction. Need to know what to do as I can't creat apple id

    The first step would probably be to contact iTunes support as you're being told to do.

  • Page cannot be displayed message ONLY on the content area of the portal

    Hi All,
    I am using Netweaver Portal 7.0 and the portal works fine if logged in as an end user. But when I'm logged in as Administrator and whenever I try to create a portal object (iview or pages etc), I get a page cannot be displayed message ONLY on the content area of the portal. It is happening quite frequently, any clue what is wrong here?
    Thanks for your help
    -Mike

    Hi
    This could  sometimes happen because of  multiple users working on the same content .
    Edited by: chandana kallu on Mar 11, 2008 1:41 PM

  • Detailed page to be called and displayed from 3 different tabs

    Hi,
    That's my problem. I have a detailed form called from 3 different pages. When calling the detailed form the 3 tabs are highlighted.
    Is there any way to tell Apex which tab is to be highlighted on each time.
    Many thanks

    Hi,
    Why don't you simply NOT list the Detail page on any of the tab properties? i.e. when the detail page is being shown, none of the tabs will appear lit up. Would that work?
    Wouldn't this look akward?
    Or you could create the form region on Page 0 and conditionally display the region as appropriate so you don't have to duplicate it on multiple pages.
    The detail form contains two updatable regions. I don't think this is a good idea.
    Any ideas what people normally do in scenarios like mine?
    I don't mind replicating the page if "that's a good practice" but I would appreciate other suggestions.
    Many thanks again.

  • Details page : no information display.

    Hi all,
    I'm new on OA F. so started with the tutorials exercises.
    At the end of exercise "Drilldown to Details", my page didn't look like expected.
    I should have a link to display details of an employee.
    I do have a link, it does got me to the details page, BUT there is no informations display face to the prompt of each properties.
    I do compile properly so there is no log.
    I tried to use the debug mode but it seems to me that I am not going into the method "intiDetails()" at the right time.
    When I click on the link, I expect to enter the method but I don't.
    (I do when I start the "debug EmpDetailsPG.xml" command on jDev)
    I checked I have correctly written the parameters in the property "Destination URL" of the component used for the link :
    OA.jsp?page=/mfab/oracle/apps/ak/employee/webui/EmpDetailsPG&employeeNumber={@EmployeeId}&employeeName={@EmployeeName}&retainAM=Y&addBreadCrumb=Y
    I compared with the solution given in LabSolutions project but I didn't find my mistake.
    Does this kind of problem rings any bell to you ?
    Cheers,
    Marine

    Hi AJ,
    Thanks for your answer. I hadn't thought of using S.O.P. ... I gave up a while ago this habit and became used to IDE debuggers.
    So, I tried your trick but I had the same problem : I didn't reached the processRequest() of my controller when I clicked the detail's link.
    I had the thought to check whether or not a controller was specified for my EmpDetailPG. Indeed, there was not.
    I tried to add EmployeeDetailsCO as the controller class in "MainRN" wich is the messageComponentLayout of the pageLayout of EmpDetailPG.
    At that time, I was able to see my values on the console (which is an improvement !) but I had a technical error in my page.
    So I defined the controller class not in MainRN but in PageLayoutRN (which is the pageLayout of EmpDetailPG, as you may guessed) and it dit it !
    I don't know why it should be define in the pageLayout instead of messageComponentLayout, but it's working.
    Thanks again.
    Marine

  • Details page displays nothing

    Hi there,
    DW CS3, PHP mySQL DB.
    I have a:
    Search Page: Works!
    Results Page: Works!
    Details Page: Does not display any data!
    For some reason my Details page displays nothing. I have the
    "Goto
    Details Page for PHP" server behaviour" from
    http://www.dengjie.com/
    I have other details pages that work excellent but cannot get
    this to
    work.
    My details page's SQL looks like this:
    SELECT *
    FROM test
    WHERE p_ID = colname
    Name: colname
    Type: numeric
    Default Value: -1
    Run-time Value: $_GET['p_ID']
    The fields I want to display are binded with the
    corresponding fields of
    the DB.
    Please help me out.
    Regards,
    Deon

    Hi there,
    DW CS3, PHP mySQL DB.
    I have a:
    Search Page: Works!
    Results Page: Works!
    Details Page: Does not display any data!
    For some reason my Details page displays nothing. I have the
    "Goto
    Details Page for PHP" server behaviour" from
    http://www.dengjie.com/
    I have other details pages that work excellent but cannot get
    this to
    work.
    My details page's SQL looks like this:
    SELECT *
    FROM test
    WHERE p_ID = colname
    Name: colname
    Type: numeric
    Default Value: -1
    Run-time Value: $_GET['p_ID']
    The fields I want to display are binded with the
    corresponding fields of
    the DB.
    Please help me out.
    Regards,
    Deon

  • How to display message in Default Frame work Page (Page Title bar)

    Dear Guru,
                    I want to display message in Page Title Bar , and that message should move like(Marquee in html) . So please any one suggest how to do and that message should be display for certain time.
    Thanks and regards
    Kumar Rakesh.

    Kumar,
    create a bsp application and create an iview from it and put it in default framework page
    code for the same
      <%@extension name="htmlb" prefix="htmlb" %>
    <%@extension name="bsp" prefix="bsp" %>
    <htmlb:content design="design2003" >
      <htmlb:document>
        <htmlb:documentHead>
        <htmlb:headInclude />
        <style type="text/css">
        .urBdyStd { background-color: "#455F55"; }
        </style>
        </htmlb:documentHead>
        <htmlb:documentBody>
    <marquee scrollamount="3" >
    <%-- <htmlb:textView
    encode ="true"
    id="a"
    textColor = "white"
    text = "BI Reports are currently down" />--%>
    <b><font size="2" color="red"><%=wa_rep-s_message%></font></b>
    </marquee>
        </htmlb:documentBody>
      </htmlb:document>
    </htmlb:content>

  • How to display a user message on WEBI Home page ?

    Hi all,
    How to display a user message on WEBI Home page ?
    like when ever the data gets scheduled at etl side i want to display a message a message on info view home page "new data is uploading" is this is possible to do ?

    Unfortunately this is not possible to do "out of the box".  There aren't any pre-configured options that will let you do this.  You're only real option is to try and modify the infoview source code yourself to do this.
    Regards,
    Shawn

  • My call logs and SMS messages display the incorrect contact details on the BlackBerry q10

    Hello there!
    I met serious problem like in the subject. Is anybody know what is going on ?
    Best regards,
    Paweł

    Hi and Welcome to the Community!
    Here is a KB that discusses that error:
    KB34772 Call logs and SMS messages display the incorrect contact details on the BlackBerry 10 smartphone
    Unfortunately, it contains nothing useful -- except for formal recognition by BlackBerry of the issue. We would then hope that a future OS release will correct it.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Best Practices Question: How to send error message to SSHR web page.

    Best Practices Question: How to send error message to SSHR web page from custom PL\SQL procedure called by SSHR workflow.
    For the Manager Self-Service application we’ve copied various workflows which were modified to meet business needs. Part of this exercise was creating custom PL\SQL Package Procedures that would gather details on the WF using them on custom notification sent by the WF.
    What I’m looking for is if/when the PL\SQL procedure errors, how does one send an failure message back and display it on the SS Page?
    Writing information into a log or table at the database level works for trouble-shooting, but we’re looking for something that will provide the end-user with an intelligent message that the workflow has failed.
    Thanks ahead of time for your responses.
    Rich

    We have implemented the same kind of requirement long back.
    We have defined our PL/SQL procedures with two OUT parameters
    1) Result Type (S:Success, E:Error)
    2) Result Message
    In the PL/SQL procedure we always use below construct when we want to raise any message
    hr_utility.set_message(APPL_NO, 'FND_MESSAGE_NAME');
    hr_utility.raise_error;
    In Exception block we write below( in successful case we just set the p_result_flag := 'S';)
    EXCEPTION
    WHEN APP_EXCEPTION.APPLICATION_EXCEPTION THEN
    p_result_flag := 'E';
    p_result_message := hr_utility.get_message;
    WHEN OTHERS THEN
    p_result_flag := 'E';
    p_result_message := hr_utility.get_message;
    fnd_message.set_name('PER','FFU10_GENERAL_ORACLE_ERROR');
    fnd_message.set_token('2',substr(sqlerrm,1,200));
    fnd_msg_pub.add;
    p_result_message := fnd_msg_pub.get_detail;
    After executing the PL/SQL in java
    We have written some thing similar to
    orclStmt.execute();
    OAExceptionUtils.checkErrors (txn);
    String resultFlag = orclStmt.getString(provide the resultflag bind no);
    if ("E".equalsIgnoreCase(resultFlag)){
    String resultMessage = orclStmt.getString(provide the resultMessage bind no);
    orclStmt.close();
    throw new OAException(resultMessage, OAException.ERROR);
    It safely shows the message to the user with all the data in the page.
    We have been using this construct for a long time for all our projects. They are all working as expected.
    Regards,
    Peddi.

  • Compensation Details Page in iRecruitment Offers

    Hi,
    We are setting up offers for our client. Done all the setup required to display compensation plans when creating offer for the applicant as mentioned in the User Guide but, the plans are not appearing on this page. i get the message 'Applicant not eligible...' though i did not setup any eligibility. One thing which i noticed is the iRecruitment is not getting triggered for the person when i move from Basic details page to compensation details page when creating the offer.
    This setup is done for UAE legislation. Similar setup worked in case of US legislation (Vision Instance). The difference is OAB is present incase of US legislation and not there for UAE legislation.
    Please let me know if there is a patch to be applied or any other setup which needs to done apart from setting up:
    Life event, Reporting Group, Plan Type, Plan, Plan enrollment Requirements, Standard rates as mentioned in the implementation guide.
    Regards,
    Sowjanya.

    It looks like you have missed some plan setup. Did you created plan years for the plan, and in plan/ program enrollments did you check unrestricted

Maybe you are looking for

  • Heterogeneous Connectivity to MSSQLServer2000 from Oracle 10g ver10.1.0.2.0

    Hi Gurus! I have oracle 10.1.0.2.0 (personal edition) running on WinXp Professional Edition MS-SqlServer 2000 developer edition on the same machine I have preinstalled microsoft ODBC for SQL Server .. I have configred MSSQLDSN for my sqlserver databa

  • Western Digital or Seagate?

    currently own a external WD 1.5TB External for 2 years now and its did good for me,but im getting another one but which brand should i go with and what brand is better?

  • Gaussian Blur Problem

    Hi there I am having trouble getting the gaussian blur to work properly. I have an image that is split up into layers using photoshop and I am trying to blur one of the layers. The only problem is that I am getting a white halo round the image as it

  • Does 2+ monitors cause a significant performance decrease?

    Howdy. I was thinking about getting a second and larger 27" monitor to use primarily for working, while bumping my current 20" to the side and using it to watch movies while I work (which is what I currently do but it kind of hogs up a bit of my work

  • Automation Open error - "ClassFact​ory cannot supply requested class" (-21472212​31)

    I am trying to use a third party COM object.  I have been provided with a comobject.DLL file and I have registered the object. I have been able to use the COM object with no problems using a VB script. Now, I need to be able to use the COM object fro