Displaying messages while running BEx queries.

Hi Experts,
Can any one explain me is there any possibility to display some popup messages while running BEx queries?
Regards,
Anusha

Hi there,
You can do taht with user exit variables with the code something like this:
WHEN 'YOUR_VARIABLE'.
    if i_step = 2.
    LOOP AT eto_charsel INTO ln_charsel.
*some validation of your own
      if ln_charsel-low NE '1'.
*call function to send a message, in this case, an error message
         CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
           EXPORTING
             i_class = 'ERROR!'
             i_type   = 'E'
             i_number = '000'
             i_msgv1 = 'Please connect again and'
             i_msgv2 = 'use the Revision Layout'.
             RAISE no_processing.
      endif.
    ENDLOOP.
    endif.
Diogo.

Similar Messages

"SYSTEM_FAILURE" error message when running BEX query

Hello,
I often encounter this error when I run BEX queries (take note that I encounter this error after I have already entered the query values). But when I run the same query in a later time, the query becomes successful, which makes the problem intermittent. I only encounter this when running BEX but I don't encounter such error when I'm running the query in RSRT and displaying it in SAP instead of in Excel. I hope you have any idea about this. Thank you.

Hi Lee,
Check transaction ST22 or SM21 after you get that message.
Hope this helps.
regards,
Diego

Error message while running the payroll-no entry found in table t54c1

Hi All,
Im getting this error-error message while running the payroll-no entry found in table t54c1.What is the reason for this error?
How doi solve it?

Hello
From the description of your problem above, your cumulation calender has not been generated for that month.
Please take necessary action to ensure that calendar type is assigned to pay period in payroll area, by maintaining the payroll period which is represented by Date modifier and period modifier in view maintainance for table T54C1.
Entries for this table are generated with the program RPUCTP10. (You should not have to create manual entries in this table.)
Thanks and Kind Regards
Ramana

Getting an error message while running FX script logic

We are getting the following error message, while running the FX script logic - RUN_LOGIC:MDX statement error:"Value (Entity value) for characteristic /CPMB/U8D5FIT". Any help is truly appreciated. We are using the standard FX logic scrip *RUN_PROGRAM CURR_CONVERSION

Hi,
Hope all the required currency configuration settings are followed in Entity, Input currency, Category, Account correctly. Also reporting currency indicates the right reporting currency with the 'Reporting' propert set to 'Y' to the currency that you want to report in.
For the period that you are running the currency trans, could you also maintain rates for the reporting currency as 1.
Check your rate data. And please post your currency conversion script here.
Thanks,
Sreeni

"Failed to load excel file" an Error Message while running TDS upgrade util

Dear All,
"Failed to load excel file" an Error Message while running TDS upgrade utility when clicking on CHECK DATA.
Please help me out on this!!!!!!!!!!!!
Thanks..........

Not all data can be exported to Excel easily. Especially if the query result is huge or there are special characters in the query results. You may try the most updated version.
Thanks,
Gordon

Error while Activating / running Bex queries/reports

Hello
I have following ERRORs while activating / running BEx reports/queries.
1. While Activating BEx reports, I keel getting following ERRORS
Object directory entry R3TR ELEM E341OIR6G715GUMGN0MRXP3MA does not exist
Error when activating element BX7FOOKQB4588RROCBTC2YVZN
BEx transport request 'BIDK901352' is not available or not suitable
2. While running the BEx report/query in Bex Analyzer, I'm getting ERROR in entering the parameters, its NOT allowing / giving me option to select the parameters, for example for 0COSTCENTER, it is NOT displaying list costcenters to select before I can RUN that particular report.
3. How can I trouble shoot ERRORs related to BEx and Portal connectivity.
4. How would I setup the Variants for a Bex query/report ? Are these Variants for per user basis / per report basis. Can I have each variant for particular users OR all users must select their own variant each time when they RUN the report ?
Thanks, Sorry I have asked multiple questions, in jst one thread.
BI

Goto SE03 -->Search for Objects in Requests/Tasks option , select the object type and execute it will give all the transports it has collected before ..
Also you can use transport connection in RSA1 and select the query and find out all the objects in query locked by what request etc ..
Thanks,
Ravi

Getting error message while running forms(Forms11g) using port 8888

Hi ,
I am facing one issue while running forms.By using http://localhost:9001 forms are working fine.
When i use http://localhost:8888 it is showing Internet explorer can not display this page.
It seems it has some issue while installing forms 11g developer suit.
Below are the details of forms and web logic versions.
forms 11.1.2.0.0
web logic server : 10.3
Can you please help me to run the forms using 8888 port.
Thanks,
Kalpana.

Check the port numbers 8888 is allowed by default to Oracle WebCenter Spaces
http://docs.oracle.com/cd/E14571_01/core.1111/e10105/portnums.htm#ASADM432
don't know exaclty how you can change the port, maybe in config files
see this thread :
{message:id=4446974}
Regards
Jean-Yves
Edited by: JeanYves Bernier on 15 déc. 2012 00:20

Error Message While Running Sequence from Planning and/or SmartView

Following error is thrown while running a sequence from either planning or smartview at a higher level.
"*An error occurred while running the specified calc script. Check the log for details*"
This is very weird because it does not happened with any of the following:
1. Running same sequence from AAS at higher level
2. Running at lower level entity either planning or smartview
3. Running from Planning or smartview with split sequence at higher level
4. Running each rule within the sequence from Planning or smartview
What have we done?
1. Checked every log file, Essbase, Planning, HBR - no error message is logged despite above statement.
2. Recycled environment
3. Stopped and restated DB and APP
Other info:
1. DB.log file is 1.2gb
2. No meta data changes
3. We could not able to replicate same in Q and Dev
4. Looked at cache setting
5. Sequence does not fail at the same place
6. Recently updated calclockblockhigh to 15000 (restarted environment)
Environment:
Planning suite: 9.3.0.1 with 9.3.1 APS.
We are going nuts and any feedback is greatly appreciated!
Thanks!
Edited by: venuramini on Jul 9, 2009 3:50 PM
Added environment section.

Hi,
To start Planning as a foreground app, stop the Planning service and then go to Start - Programs - Hyperion Solutions - Hyperion Planning - Start Planning (Apache Tomcat).
Thats if you are using Tomcat of course. A DOS window should then pop.
What value did you enter for the HBR properties? Have you tried 960000 for both? Remember you need to restart the Planning services for changes to take effect.
Have you tried increasing some of the properties in the HBRServer.properties under Hyperion\AnalyticAdministrationServices such as:
HBR.timeout
Try setting it to 30000
The restart the AAS service for the changes to take effect.
Hope this helps.
Seb

Error message while running a query

Hello experts,
While running a query I am getting an error message as :
Abort error 'connection closed (no data) in RSRDC_CUBE_DATA_GET_RFC could not
Abort system error in program SAPLRRK0 and form RSRDR; SRRK0F30-01-
please advice what are these errors, cause and resolution for these errors.
Thanks,
Anamika

Hi Anamika,
If you are running your query in Web Portal, it seems your web portal is not defined in RFC connection with system. Ask BASIS to connect it.
Also, You can run your report in RSRT with ABAP Web option and check if it is working on ABAP engine.
Regards,
Harpal
Edited by: Harpalsinh Gohil on Aug 17, 2009 2:53 PM

Problem while running BEx Query

Hi All,
I had reqiurement of calculating the difference of the two dates.I calculated Date Difference but I am getting problem when I run the Query.
The problem is " I am finding the difference between Schedule Line Date and Posting Date. There are some blank spaces in the cube over Schedule Line Date and also over Posting Date. While running the Query Blank Space is taken as # symbol and while calculating the differences it is giving the differences in Lakhs."
Can anybody help me to solve the problem " To remove the # symbol and calculate the differences properly".
Thanks in advance.
With Regards
Mahi

Hi,
Use the Boolean concept like below:
I hope you are using formula varibles to get Dates into the formula.
Lets assume fv1 is formulavarible on Schedule line date and FV2 is Formula varible on Posting date.
(FV1 == '' OR FV2 == '') * 0 + (FV1 <> '' AND FV2 <> '') * (FV1-FV2).
With rgds,
Anil Kumar Sharma .P

Error message while running the report RFUMSV50 (Service Tax)

Hi Experts,
I have occured the following error while running the Report for for transferring the Service Tax from Interim to Final Account.
F107: Restrict Period
F7566
I have executed the report RFUMSV50 by T.Code SE38
Please help me in this matter.
Thanks
Priya

Hi
have you checked
1. Global Parameters for Company Code
. Currency Trln Rate set as '2' (WhichMeans exchange rate determined using posting date)
2. Deferred Tax code Z0 created with Target Tax Code Z1
Cya
udayakumar.k

Error while running sql queries..

Hi there,
We are suppose to run gather schema stats..
but while running the procedure we are getting following error..
gather_schema.sql:
exec fnd_stats.gather_schema_statistics('CMWCONN');
exec fnd_stats.gather_schema_statistics('CMW');
exec fnd_stats.gather_schema_statistics('ALL');
SQL> @gather_schema.sql;
BEGIN fnd_stats.gather_schema_statistics('CMWCONN'); END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00201: identifier 'FND_STATS.GATHER_SCHEMA_STATISTICS' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
BEGIN fnd_stats.gather_schema_statistics('CMW'); END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00201: identifier 'FND_STATS.GATHER_SCHEMA_STATISTICS' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
BEGIN fnd_stats.gather_schema_statistics('ALL'); END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00201: identifier 'FND_STATS.GATHER_SCHEMA_STATISTICS' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
Could you give me the correct pl/sql procedure to run the query.
Thanks,.
Balu.

Actually the script was working fine last week..we are using the following script
SQL> exec fnd_stats.gather_schema_statistics('ALL');
but it throws me the following error
BEGIN fnd_stats.gather_schema_statistics('ALL'); END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00201: identifier 'FND_STATS.GATHER_SCHEMA_STATISTICS' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored

Runtime error while running the queries on Portal

Hello
While running the BI7 query the error has occured . Description of the error is
Portal runtime error
An exception has occured while processing your request . Send the exception Id to your adminstrator
But when the query is being run in the direct portal url it is working fine , it is only when we try to run the query with the user id which has single sign on .
Unable to understand why this problem is there as the business demands to run all the query with the single sign on
Please let me know the solution for this

Hello.
I have created a system alias. But still the problem persists.
It still throws the same error.
Could You please suggest some other option.
Regards,
SampathKumar G.

Wrong message while running report in bex analyzer

Hi Experts,
I have created an authorization object based on compnay code. I use the option RSECADMIN => Analysis => Execute As, to test this authorization object. When I give incorrect company code value, it displays correct message that is 'No authorization'.
But when I test in bex analyzer for same report, with same incorrect company code value instead of showing 'No authorization' message, it shows 'No applicable data found' message. Is there anything wrong here?
How can I show the correct authorization message 'No authorization' in bex analyzer, when incorrect company code is supplied?
Thanks,
Purvang

Hi Pratap,
thanks for reply.
I also thought that way initially but then was skeptical of different message received while testing in RSECADMIN. If SAP is going to show 'No applicable data found' message then how will a user have any idea that actually he is not authorized for the supplied value of company code.
does anyone know if this is bug or is there any workaround to show right message i.e. no authorization.
Thanks,
Purvang
Edited by: Purvang on Oct 19, 2011 3:18 AM

MDX Error in WebI while running Bex Query

Dear Experts,
In my System BO XI R3.1 Enterprise and Integration kit For SAP has installed.
While creating query with Efashion and MS Acess files query is running fine.
But in case of BI queries(InfoCube or BEx Query) it is giving "Select Dimension 1 CrossJoin Dimension2...."Error(10901).
Test Connection of BI (The server is responding)is working fine.
How to solve the issue?
Thanks in Advance
Venkat P

Hi Venkat,
Obviously there is something wrong with your query.
What happens if you parse the MDX using the BW transaction MDXTEST - does it work ok?
You need to try and identify at what point the query is failing, i.e. is it caused at the BW layer or is it a problem at the XI3.1 application layer...?
I hope this is a very helpful answer to you.
Kind regards,
John

Displaying messages while running BEx queries.

Similar Messages

Maybe you are looking for