Key figures with currency conversion showing weird values.

Hi Experts,
I have a variable screen,
User can key in Target Currency, and Month.
Say,
(Scenario 1) User keys in Target Currency "MYR", and Month "4"
The report will show
Jan| Feb| March| April| May| June| ...
2| 3| 5| 7| 0| 0| 0 ...
This is correct.
(Scenario 2) User keys in Target Currency "USD", and Month "4"
The report will show
Jan| Feb| March| April| May| June| ...
2| 3| 5| 7| 3| 5| 7 ...
This is wrong, should not show figures for month May and onwards.
(Scenario 3) User keys in Target Currency "SGD", and Month "4"
The report will show
Jan| Feb| March| April| May| June| ...
1| 2| 3| 4| 0| 0| 0 ...
This is correct.
*In the infoprovider, the key figure is tied to currency "MYR".
In developement system, i replicated the exchange rate table, and the problem (Scenario 2) is solved.
In test system, i replicated the exchange rate table, and the problem (Scenario 2) is still there.
I am not sure what is happening here.
Please could you please kindly advise.
Thanks.
Tee

There appear to be two factors happening here.. one is how you have your query restrictions set up, and the other is the currency translation method that you are using. What results a currency translation provides depends on both the translation key definition AND the availability of a valid currency translation for the appropriate period.
First, review transaction RSCUR and see how your currency translation is defined.
Then review transaction oB08 and see if there is a valid currency conversion factor during the affected time.
Once you're certain all that is correct, review your query and how it is functioning. The fact that you wish to display months for which you do not wish to return data seems to indicate your 0CALMONTH2 restriction is not set up properly.

Similar Messages

Currency Translation for Key Figures with Value More Than One Currency

Hi...
I have query which display key figure GL Account Balance. The currency that used for this key figure is USD and IDR. How we want display value based on selection screen? So if we input currency USD, all value that use currency IDR translated to USD and all value that use currency USD not changed. Otherwise if we input IDR, all value that use currency USD translated to IDR and all value that use currency IDR not changed.
How we do this in query designer? Thank you.
I have use currency translation :
1. (Right Click Key Figures >> Properties >> Currency Conversion Key)
2. Target Currency Using Variables Entry
but seems the result is not correct. Can anyone help me ?
Regards,
Satria

Hi all,
Thanks for your help, but still I have problem. I have create one currency conversion type, ZXXX. This currency conversion type is using exchange rate type = "M",source curr from Data Rec, sel of targ currency with translation,
and fixed time ref = "Current Date".
Problem:
1. With this setting, i create currency translation in BEx, but the result is not same, it's like the exchange rate not using the same setting with data in ECC (I compare data with transaction fs10N). Is my setting for exchange rate not correct?
2. When I try to display GL Account Balance --> Calculated Key Figure (Total Debet - Total Credit) for period 0, the translation not working. Example if the value is IDR 1234 then the value in USD still USD 1234. Why this happen?
Thank you
Regards,
Satria

No values when using key figure with constant selection?

Hi experts,
I have built a Webi on top of a universe that is sitting on top of a Bex query.
In my Bex query I have a bunch of key figures defined that are restricted on time and category.
This Webi works fine.
Then I added an additional key figure that required a constant selection on time and on category.
When I first added this to my Webi report it was fine. But once I refreshed my report showed no values.
The report still seems to know that it is meant to retrieve values because it is bringing back the correct records - just no values. (ie I am showing time in my columns and it's showing the correct periods that are meant to have data)
I refreshed a number of times and sometimes it would bring "#TOREFRESH" in some cells but once I refreshed again the cells are blank. Sometimes it would even show me a value in a couple of cells and others would show the "#TOREFRESH"
I went back to my Bex query and removed the key figure with constant selection and the report is working again?
Has anyone experienced something similar? Is there a way to make this work?
Thank you!
Sabine

#TOREFRESH error message appears for smart measures (measure object with aggregation type Database Delegated) when the context for the measure is changed. Refreshing data will solve the issue. Database delegated measures are used for some non-additive aggregation which webi is not able to handle properly. If you are not using such aggregation, then tou can change the aggregation type to something other than database delegated to avoid #TOREFRESH.

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

Add new key figure with characteristics in report painter

Hi expert,
I am create a new report painter in GRR2 under report group 8A2 (EC-PCA: Standard Reports) and i would like to create a report show on G/L amount with segment.
When i click on first column to assign "key figure with characteristics" i am not able to find characteristics "segment".
Please kindly advice how to create in new characteristics in report painter?
Thanks.
p/s : profit center number is same with segment number
regards,
ng chong chuan

Hi,
"segment" is not a characteristic of classical profit-center accounting (libraries 8A*). Its a New GL characteristic, thus create a report painter report for New GL library.
best regards, Christian

Key figure with pre-calculated aggregation

Hello,
I have to model a key figure with a pre-calculated aggregation, that is, soruce flat files contain explicit values for months, quarters, halfyears and years. The key figure is a percentage (service quality) and the corresponding company department provides me with results for all aggregation levels.
I think that this case can be modeled with one InfoCube for each aggregation level and a Multicube but I have to create a high number of InfoCubes (aprox. 180).
I can get the formula that department uses, but it's possible on BW to change standard aggregation (SUM, MAX, MIN)?
Thanks in advance and regards,
Alberto Garcia.

Hi Alberto,
One of the ways of doing it could be -
add another field (char) to your cube called at "value Type" & assign different values to it depending upon the time value.
say Monthly - value type 1
Querter - value type 2
& so on ...
keep filling the same key figure.
at the time of reporting restrict your key figure accordingly with the value type. ( say need only montly key figure value restrict value type to "1")
hope it helps.
VC

Subject: Displaying key figures without currency unit in BEX reports

Hello,
Is it possible to display key figures without currency unit in BEx reports? For example; Material Costs 1000 EUR
should be shown as 1000. Currency unit EUR and also scaling factor (*1000 EUR) does not interest us.
When we use display options in query properties, we just see an option of displaying key figures with/without scaling factors, which does not solve our problem.
Thanks for your reply.
Regards,
Nuran Adal

Hi Eugene,
thank you very much for your quick reply. We have very detailed reports with min. 10 columns, I should have defined 10 more formula columns to realize this (NODIM), but anyway there is no other way to do this, am I right?
Best Regards,
Nuran

Can not Sorting by Key Figure with Analyzer and Excel 2007

Hello experts,
We have recently changed to Office 2007, and the funcionality of Sorting by a Key Figure with BEx Analyzer is desactivated.
We have applied the patch 10 for BEx BI 7.10.
Has anybody had the same problem?
Thanks in advanced.

Hi Patricia,
Have you got two structures in your query?
Please take a look at the following notes:
1378796 - Disabled Sorting when there is one struct. in the drilldown
1332267 - BExAnalyzer: changes in cell properties dialog / sorting
these should explain why the sort feature is no longer available in certain scenarios.
many thanks
Orla.

Key Figures With Hide can be shown showing wrong values when displayed in a query

Hi Experts,
I have a qiery with two structures in the column(cell Definition) three key figures are displayed and the rest are all hide can be displayed. However whenever i display one of the hidden key figures along with one displayed key figures it initially shoes incorrect values. Once i add another key figure (which has status always show) the hidden jey figure value gets corrected. Is it a problem with the structure? Kindly assist.For example when i display the actuals(always show) and actuals rate(hide can be shown) the values for actuals rate are wrong , however when i add the plan rate(always ahow) the values for actual rate gets corrected. Screenshots for structures below.

Hi Sayanto,
For this I would recommend you to check the Key figure definition in all 3 situations.
1. original display
2. display of hidden KF
3. Display of existing KF
I suspect that cell references may have some effect on the calculation as you are adding the hidden KF in analyzer directly. You can prove this only by checking Key figure definition.
Please let me know if you are facing any issue in getting the Key figure definition itself.
Also, as Cornelia suggested check if you have any constant selection applied to any of your KFs.
Hope this helps.
-Swati.

Calculated key figures with incorrect values

Hi experts,
i have a requirement whre i have multiple calculated key figures based on different restricted key figures.
say for eg:
RKF1-restricted to calmonth 01.2006
RKF2-restricted to calmoth 01.2007
ckf1-RKF1 %a RKF2
RKF3-restricted to calmonth 02.2006
RKF4-restricted to calmoth 02.2007
ckf2-RKF3 %a RKF4
and so on...
In my output of the report, ALL CKFs are show same result as CKF1!!
please suggest..
thank you all in advance

Hi,
Indeed my cube is a copy of 0IC_C03.
Could you please explain more about the filtering.
I have the following key figures
0TOTALSTCK
0ISSTOTSTCK
0RECTOTSTCK
ZISSSTCK_VALUE
ZREC_VALUE
ZTOTSTKVALUE
ZTOTSTKVALUE is CKF with inflow and outflow of ZISSSTCK_VALUE
ZREC_VALUE
Whenever there is 0 it displays NO CALC possible. I would like to have it blank or 0s.
thanks

Key figures with Heirarchy in Bexquery not showing up in Snapshot/ Explorer

Hi,
I am taking a snapshot of a multiprovider in Explorer using T-code RSDDV.
In the related bex query I have a few calculated Key figure which I want to get it into the explorer tab / Key- figures. The idea here is to use these as measures within the Explorer portal.
The problem I am running into is if any of these key figures use Hierarchies I am not able to bring it in but without the hierarchies I have no issue.
Has someone come across this?
If you need more clarification please feel free to ask.
Thanks
bob

You have a beautiful example in the Oracle By Example Series here :
http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/bi_admin/biadmin.html#t2s7
If you follow the instruction on the Channels Detail_Key in this example, you will succeed
Success
Nico

Text elements and key figures with multiple restrictions

Hi,
I'd like to display text elements in my query according to the restricted key figures in it. There is a restricted key figure used multiple times with different base of restriction. (For exmple Sales in the past week and yesterday.)
KF restricted by <i>actual calendar week</i>, and
KF restricted by <i>actual calendar day</i>
When displaying text elements, only calendar week appears, however, if KF restricted by calendar week is removed from the query, calendar day is being displayed. (I suppose that both time characteristics are taken as filter values.)
Is that possible to display both filter values at once? Or at least calendar day meanwhile still having the week-based restriction in the query?
Thanx in advance,
Gabor

One option would be to not use the *MVAL keyword and load the amount and quantity in separate Data Manager package imports wherby you can easily assign the NA to the appropriate dimension. When you import amount -- assign NA to P_UNIT and when you import quantity -- assign NA to P_CURRENCY.
However I suppose you would prefer to have one import process. Unfortunately I think you will have to find an ABAP custom solution by calling the END_Routine BADI from the transformation file to deal with the currency and unit dimensions.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

Restricted key figure with operater symbol depending on characteristic v

We have a operating income report that shows actual, forecast and budget amounts, the variance and %variance in its columns and revenue and expense items (Hierarchy nodes, expandable) in its rows.
The %variance key figure for revenue and expenses is calculated the same way, except if it's a expense node it has to be multiplied by -1. We would like to show that key figure in one column only. What would be the easiest way to achieve that?
Thanks a lot,
Fabian

How do you identify the account as revenue or expense...if my understanding of your issue is correct....you must be having a GL Hierarchy (example) in the rows and you are tring to show the actual, plan by value type. To overcome with your issue, the best and definite solution that works (we did have the same approach) is to reverse the sign at the hierarchy level in rsh1 itself than worrying about it in the query.

Need help with Currency Conversion

Hello,
I need to implement currency conversion in our existing classic planning application (11.1.2.1) which was initially set as a multi-currency application but so far we didn’t have the users entering data in their local currencies. We were entering all the values in USD. Now the users will be entering data in their local currencies and we need to convert their local data into USD for reporting purposes.
I don’t have much experience with multi-currency applications and so I would really appreciate if the gurus here can guide and help me.
Our currency dimension has the following three members USD, B, C. Our reporting currency is USD which is the default currency for our application.
After reading some forum posts and documentation below are the steps I tried but couldn’t get it to work right. Correct me if I am doing something wrong, or in the wrong order or missing something.
Administration – Manage – Exchange Rates – Create – A_FY13 – Edit – Chose all the options – Average, Ending, BegBalance, Historical, Method – Clicked Next – Chose the Year as FY13 from the drop down (in Show Years) and entered the exchange rates for both B & C – Save.
A message was displayed – “Exhange Rate has been saved successfully”.
Administration – Manage – Currency Conversions – A_FY13 – Next - Currency - USD, Scenario – Actual, Version Type – Target, Version – Working – Save.
A message was displayed – “Scripts were successfully created”.
In EAS both the scripts – HspCRtT & A_FY13 were created.
Edited the A_FY13 script FIXs to only work on year FY13 for one month for testing purposes.
In workspace edited the Actual scenario to be associated with the A_FY13 exchange rate table.
In EAS ran the HspCRtT script first followed by ACT_FY13. The scripts completed successfully.
While pulling data (Level 0 data) in Excel the data is present in “Local” intersection for the accounts I am looking at but when looked at the USD intersection the data is converted right for only one account, for some other accounts there is no data in the intersection and for another account which is a weight account (weight of a product) which doesn’t need to get converted the values got converted. For some reason the conversion isn’t working right for the accounts.
Are there any steps that I am missing here? Please let me know your ideas and help me. Any help is appreciated and I will be looking forward for suggestions and ideas.
Thanks.
~ Adella
P.S ~ I had posted a similar question a couple months earlier but still couldn't really get things to work... and so I am posting it again to get more help. For those who are feeling that they have read this kind of a question earlier from me...please bear with me as I couldn't get my issues resolved and still couldnt get things implemented successfully. Again, I would really appreciate if you could further help me with your ideas and suggestions.

replied to the old thread
Regards
Celvin
http://www.orahyplabs.com

Report Painter - new Basic Key Figure for Currency Translation

Hi,
I need a report painter report which allows to translate the company code currency HSL in GLPCT into several target currencies. Theoretically I need to translate each month with an own translation rate and possible different translation keys.
In table T804B I tried to create a new basic key figure for GLPCT in order to translate the HSL amount with a second TCURR rate. I copied the original basic key figure GLPCT - CC_HSL. I selected structure GLBDZ and fields CCH++ as data source and assigned new variables for the TCURR selection.
The report painter report is setup with three columns : one in HSL, one with CC_HSL and one with the new key figure. In the selection screen of the report painter report I can enter two rates. But after execution the translation of the new basic key figures is done with the same rate as the CC_HSL column is using.
Did anybody encounter an equal problem?
Many thanks and regards
Markus

have you created a new calculation routine in form pool SAPFGRWG equivalent to E06_CALC_CURR_CONV_HSL? doesnt this explicitly get the company code currencies

Key figures with currency conversion showing weird values.

Similar Messages

Maybe you are looking for