Displaying multiples lines of an Internal table to Textedit.

Hi,
I have an internal table. I wish to display them in an TextEdit as multiple lines. ie, each record of an internal table (which has only one string element) should be displayed as an individual line inside the TextEdit. How do i achive that ? I tried concatenating seperated by '/', but not working. Please suggest.
Thanks,
Gaurav.

Thomas is right, but supposedly (haven't tried myself yet) you could also bound the value property to a STRING_TABLE typed attribute (plain i.e. not structured string table).
If you follow the concatenation approach, the separator to be used is NEWLINE.
Here's the relevant help excerpt:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/06/45ee412e5e6324e10000000a1550b0/content.htm
value
Text to be displayed. The text can be edited.
The attribute to be bound can be of type STRING or STRING_TABLE. With STRING_TABLE rows from TextEdit are stored as table rows. A line break is always stored as a line feed in a STRING (CL_ABAP_CHAR_UTILITIES=>NEWLINE, ASCII decimal 10). The Web Dynpro framework carries out the conversion for the client platform.
Note that a string to be displayed in TextEdit, must only use a line feed as a line break.
Regards

Similar Messages

How to display multiple lines of texts in a single rows in ALV

Hi,
I have a unique requirement in which i have to display multiple lines if texts for a single rows in ALV Grid. Right now in my output it is coming in single line which is not visible fully because that text is more than 255 character. So i want to display the test by splitting into multiple lines and show it on output. Please suggest some solution for this if this is possible in ALV.
Thanks,
Raghav

Hi Raghavendra,
Its not possible to display multiple line in one row of an alv, but i think you can acheive it by splitting the whole text into multiple sub-text.
For example, if your requirement is as below:
Field #1          Field #2
1                    xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx(200 characters)
2                    yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy(220 character)
then you can break Field#2 value into say 50 character and then populate the internal table with repetative entries of Field#1 and the finally sort it by Field#1 value... as a result of which you output will be somewhat as below:
Field#1          Field#2
1                   xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
                     xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
                     xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
                     xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2                   yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
                     yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
                     yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
                     yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
                     yyyyyyyyyyyyyyyyyyyy
Hope it will help you in meeting your requirement.
Regards,
Shradha

Crystal report -How to display multiple lines in line chart?

Hi,
M struggling to display multiple lines in line chart. All the values m fetching it from database into data table in below format & data type
Category(String).....year(Int).....graph_values(Int).....table_value(String)
Test.........................2006.......... -100............................(100)
Avg..........................2006..........20................................20
Median......................2006...........5................................5
Test..........................2007...........500.............................500
Avg...........................2007............90..............................90
Median.......................2007............45..............................45
M using cross tab to display data and chart to plot line. Following fields I used in Cross tab Expert & Chart expert
Cross tab expert-
Rows u2013 category
Columns u2013 year
Summarized fields u2013 Min of table_value
In Chart Expert u2013
On Change of - Year
Show values - graph values
In cross tab m able to see the data properly but not in graph.I have three categories. Hence it should plot three lines in line chart but m able to see only one line for test category.
FYI u2013 using VS 2008 and crystal report assembly version 10.5
Urgent. Please reply soon.
Thanks
ThakurS

I got the solution.
In Chart Expert - I should use
On Change of -- Year, Category
Show values -- graph values
Thanks,
ThakurS

How to display multiple lines in a text box defined in steploop.

Hi,
I have a requirement to display data ( which is dynamic in nature. I determine data type,length etc dynamically) in a table format. I am using step loop for the same. I am facing a problem. Some field can be as long as 256 char long. Is there any way to display multiple lines in text box defined in a step loop so that I can display the complete string as one entity.
I can't use custom control as custom control can't be defined in a step loop or table controlI would really appreciate your help on this.
Regards,
Sanjeev

Hello Sanjeev
Perhaps it is possible to use a <b>mixed strategy</b> consisting of a classical table control (or, even better, an ALV grid list) where you display the first 250 character of the data and next to the table control you place a simple textedit control. When the user selects one of the text fragments in the table control the entire text will be displayed in the textedit control.
Regards
Uwe

Help on ALV GRID display outputting format for 2 internal tables

Hi,
    I have requirement in ALV GRID where I need to display the data from 2 internal tables. The first internal table has the content of Delivery due list data and second the internal table has the corresponding stock transfer data of the Delivery Due list. I have a checbox on my selection screen, when unchecked it should output the 1st internal table data, i.e for Delivery due list. When it is checked then it should output 1st Internal table data + 2nd internal table data of stock transfer. For example, 1 document delivery due list data and 2nd line for that document should show the stock transfer data. You can also check the transaction code VL10E for that will show a delivery due list...and for stock tranfer,you need to check with Purchase order in in the USer Role tabstrip. Pls suggest.
Regards,
Mira

Hi,
U can try out this code
REPORT zzz_test NO STANDARD PAGE HEADING
                       MESSAGE-ID zz.
The Data Declarations
INCLUDE zzm_test_alv_data.
The Selection Screen Definition
INCLUDE zzm_test_alv_selscrn.
The definition and implementation of the event reciever class
INCLUDE zzm_test_alv_class.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM f1000_load_itabs.
END-OF-SELECTION
END-OF-SELECTION.
IF NOT cb_disp IS INITIAL.
    CALL SCREEN 9001.
ENDIF.
Include for getting data
INCLUDE zzm_test_alv_forms.
Include for PAI and PBO of screen
INCLUDE zzm_test_alv_screen.
INCLUDE ZZM_TEST_ALV_DATA                                          *
This include has all the data declaration defined
Author............: Judith Jessie Selvi
Creation Date.....: 28/03/2005
Table Declarations:
TABLES: mara,
        makt.
Internal Tables:
The following structure type must be defined in the data dictionary
DATA: i_fieldcat TYPE lvc_t_fcat,
       i_fieldcat1 TYPE lvc_t_fcat,
       i_output1   TYPE STANDARD TABLE OF mara,
       i_output2   TYPE STANDARD TABLE OF makt,
Work Areas:
       w_output1   TYPE STANDARD TABLE OF mara,
       w_output2   TYPE STANDARD TABLE OF makt.
Variable:
DATA: lv_repid    LIKE sy-repid.
lv_repid = sy-repid.
INCLUDE ZZM_TEST_ALV_SELSCRN                                       *
Author............: Judith Jessie Selvi
Creation Date.....: 28/03/2005
SELECTION-SCREEN BEGIN OF BLOCK b_main WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP 1.
PARAMETERS: cb_disp AS CHECKBOX.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN END OF BLOCK b_main.
INCLUDE ZZM_TEST_ALV_CLASS                                         *
This include has all the data declaration defined for ALV
Author............: Judith Jessie Selvi
Creation Date.....: 28/03/2005
INCLUDE <icon>.
Predefine a local class for event handling to allow the
declaration of a reference variable before the class is defined.
DATA : o_alvgrid1 TYPE REF TO cl_gui_alv_grid ,
       o_alvgrid2 TYPE REF TO cl_gui_alv_grid ,
       cont_for_cognos1   TYPE scrfname VALUE 'BCALC_GRID_01_9100',
       cont_for_cognos2   TYPE scrfname VALUE 'BCALC_GRID_01_9200',
       custom_container1 TYPE REF TO cl_gui_custom_container,
       custom_container2 TYPE REF TO cl_gui_custom_container,
      Work Area
       w_layout TYPE lvc_s_layo ,
       w_variant TYPE disvariant.
      Constants
CONSTANTS : c_lay(1) TYPE c VALUE 'A' .                  " All Layouts
CONSTANTS: BEGIN OF c_main_tab,
           tab1 LIKE sy-ucomm VALUE 'MAIN_TAB_FC1',   "
           tab2 LIKE sy-ucomm VALUE 'MAIN_TAB_FC2',   "
           END OF c_main_tab.
INCLUDE ZZM_TEST_ALV_FORMS                                         *
This Include has the various forms used in the program
Author............: Judith Jessie Selvi
Creation Date.....: 28/03/2005
*&      Form f9001_build_field_cat
      To Build Field Catalog
     -->P_I_FIELDCAT text
     -->P_0021   text
FORM f9001_build_field_cat TABLES   p_fieldcat STRUCTURE lvc_s_fcat
                      USING value(p_structure).
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
       EXPORTING
            i_structure_name       = p_structure
       CHANGING
            ct_fieldcat            = p_fieldcat[]
       EXCEPTIONS
            inconsistent_interface = 1
            program_error          = 2
            OTHERS                 = 3.
IF sy-subrc <> 0.
    MESSAGE i005 WITH 'Error in ALV field catalogue creation'.
                                                            " text-e05.
    LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM.                    " f9001_build_field_cat
*&      Form f9000_objects_create
      For creating Custom Containers
--> p1        text
<-- p2        text
FORM f9000_objects_create.
CREATE OBJECT custom_container1
      EXPORTING
          container_name = cont_for_cognos1
      EXCEPTIONS
          cntl_error = 1
          cntl_system_error = 2
          create_error = 3
          lifetime_error = 4
          lifetime_dynpro_dynpro_link = 5.
CREATE OBJECT custom_container2
      EXPORTING
          container_name = cont_for_cognos2
      EXCEPTIONS
          cntl_error = 1
          cntl_system_error = 2
          create_error = 3
          lifetime_error = 4
          lifetime_dynpro_dynpro_link = 5.
IF sy-subrc NE 0.
add your handling, for example
    CALL FUNCTION 'POPUP_TO_INFORM'
         EXPORTING
              titel = lv_repid
              txt2 = sy-subrc
              txt1 = 'The control could not be created'(510).
ENDIF.
CREATE OBJECT o_alvgrid1
       EXPORTING i_parent = custom_container1.
CREATE OBJECT o_alvgrid2
       EXPORTING i_parent = custom_container2.
ENDFORM.                    " f9000_objects_create
*&      Form f9003_layout
      To define the layout
     -->P_SY_TITLE text
     -->P_0030   text
     -->P_0031   text
     -->P_0032   text
FORM f9003_layout USING value(ptitle)
                         value(pzebra)
                         value(pmode)
                         value(pwidth).
w_layout-grid_title = ptitle.
w_layout-zebra       = pzebra.
w_layout-sel_mode    = pmode.
w_layout-cwidth_opt = pwidth.
w_variant-report     = sy-repid.
ENDFORM.                    " f9003_layout
*&      Form f9006_error_handle
     To handle event
     -->P_PTEXT text
FORM f9006_error_handle USING value(ptext).
IF sy-subrc NE 0.
    CALL FUNCTION 'POPUP_TO_INFORM'
         EXPORTING
              titel = text-e03 " Error Note
              txt2 = sy-subrc
              txt1 = ptext.
ENDIF.
ENDFORM.                    " f9006_error_handle
      FORM EXIT_PROGRAM                                             *
FORM exit_program.
CALL METHOD custom_container1->free.
CALL METHOD custom_container2->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
    CALL FUNCTION 'POPUP_TO_INFORM'
         EXPORTING
              titel = lv_repid
              txt2 = sy-subrc
              txt1 = 'Error in FLush'(500).
ENDIF.
ENDFORM.
*&      Form f1000_load_itabs
      Select from Database
--> p1        text
<-- p2        text
form f1000_load_itabs.
SELECT * FROM mara
           INTO TABLE i_output1
           UP TO 50 rows.
SELECT * FROM makt
           INTO TABLE i_output2
           UP TO 50 rows.
endform.                    " f1000_load_itabs
INCLUDE ZZM_TEST_ALV_SCREEN                                        *
2/ Description / Include functions
This include contains PBO and PAI events for the screen of report
ZZZJJ_TEST_ALV
3/ Responsibility
Author............: Judith Jessie Selvi
Creation Date.....: 28/03/2005
DATA FOR TABSTRIP 'MAIN_TAB'
CONTROLS: main_tab TYPE TABSTRIP.
DATA:      BEGIN OF i_main_tab,
             subscreen   LIKE sy-dynnr,
             prog        LIKE sy-repid VALUE
                              'ZZZ_TEST',
             pressed_tab LIKE sy-ucomm VALUE c_main_tab-tab1,
           END OF i_main_tab.
*&      Module STATUS_9001 OUTPUT
      text
MODULE status_9001 OUTPUT.
IF custom_container1 IS INITIAL.
SET PF-STATUS 'ZSTATUS'.
SET TITLEBAR 'ZTITLE'.
Creating Object
    PERFORM f9000_objects_create.
Building the field catalog
    PERFORM f9001_build_field_cat TABLES i_fieldcat
                            USING 'MARA'.
    PERFORM f9001_build_field_cat TABLES i_fieldcat1
                            USING 'MAKT'.
Modifying the field catalog
   PERFORM f9002_modify_field_cat TABLES i_fieldcat.
For Layout
    PERFORM f9003_layout USING sy-title 'X' 'B' 'X'.
ENDIF.
ENDMODULE.                 " STATUS_9001 OUTPUT
*&      Module MAIN_TAB_ACTIVE_TAB_SET OUTPUT
      Call method to display in the output grid
MODULE main_tab_active_tab_set OUTPUT.
main_tab-activetab = i_main_tab-pressed_tab.
CASE i_main_tab-pressed_tab.
    WHEN c_main_tab-tab1.
To display report
     i_main_tab-subscreen = '9100'.
      CALL METHOD o_alvgrid1->set_table_for_first_display
      EXPORTING
         is_variant                    = w_variant
         i_save                        = c_lay
         is_layout                     = w_layout
      CHANGING
         it_outtab                     = i_output1[]
         it_fieldcatalog               = i_fieldcat[]
      EXCEPTIONS
         invalid_parameter_combination = 1
         program_error                 = 2
         too_many_lines                = 3
         OTHERS                        = 4.
IF sy-subrc <> 0.
    MESSAGE i000 WITH text-e06."Error in ALV report display
    LEAVE LIST-PROCESSING.
ENDIF.
    WHEN c_main_tab-tab2.
To display report
      i_main_tab-subscreen = '9200'.
      CALL METHOD o_alvgrid2->set_table_for_first_display
      EXPORTING
         is_variant                    = w_variant
         i_save                        = c_lay
         is_layout                     = w_layout
      CHANGING
         it_outtab                     = i_output2[]
         it_fieldcatalog               = i_fieldcat1[]
      EXCEPTIONS
         invalid_parameter_combination = 1
         program_error                 = 2
         too_many_lines                = 3
         OTHERS                        = 4.
IF sy-subrc <> 0.
    MESSAGE i005 WITH text-e06."Error in ALV report display
    LEAVE LIST-PROCESSING.
ENDIF.
WHEN OTHERS.
     DO NOTHING
ENDCASE.
ENDMODULE.                 MAIN_TAB_ACTIVE_TAB_SET OUTPUT
*&      Module MAIN_TAB_ACTIVE_TAB_GET INPUT
      Check & Process the selected Tab
MODULE main_tab_active_tab_get INPUT.
CASE sy-ucomm.
    WHEN c_main_tab-tab1.
      i_main_tab-pressed_tab = c_main_tab-tab1.
    WHEN c_main_tab-tab2.
      i_main_tab-pressed_tab = c_main_tab-tab2.
    WHEN OTHERS.
     DO NOTHING
ENDCASE.
ENDMODULE.                 MAIN_TAB_ACTIVE_TAB_GET INPUT
*&      Module USER_COMMAND_9001 INPUT
      User Command
MODULE user_command_9001 INPUT.
CASE sy-ucomm.
    WHEN 'BACK'.
      PERFORM exit_program.
      SET SCREEN '0'.
    WHEN 'EXIT' OR 'CANC'.
      PERFORM exit_program.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 USER_COMMAND_9000 INPUT
*&      Module MAIN_TAB_ACTIVE_TAB_SET INPUT
      Set sunscreen
MODULE main_tab_active_tab_set INPUT.
main_tab-activetab = i_main_tab-pressed_tab.
CASE i_main_tab-pressed_tab.
    WHEN c_main_tab-tab1.
        i_main_tab-subscreen = '9100'.
    WHEN c_main_tab-tab2.
        i_main_tab-subscreen = '9200'.
    WHEN OTHERS.
     DO NOTHING
ENDCASE.
ENDMODULE.                 MAIN_TAB_ACTIVE_TAB_SET INPUT
Thanks & Regards,
Judith.

To delete the last line of the internal table

How to delete the last line of the internal table.???????
The list which gets displayed from the internal table adds a dummy line at the last which shows zeros and zeros.all the otheer selections are perfect.i just want to delete the last line which comes as zero zero.is there any way to do it...

Quite Easy......Use Describe command to Count the Total Number of Table Lines, and then Delete the Last Line using Index.
Data L like sy-tabix.
Describe Table Itab Lines L.
Delete itab index L.

Inserting a line in a internal table

Hello guys , I want to insert in the forst line of my internal table son titles in order to move the entire table to txt file , But I dont kno how I can put the titles in the first line, any suggestion ? DO I have to use a index?

Where are you writing the text file??
If you are using GUI_download, then you can pass the header text( in a different internal table) to the FM.
If you are using open dataset you can write the header first and then the internal table.
I dont think inserting text in the data table is a good idea.

How can I search the last line in an internal table?

How can I search the last line in an internal table?
With a describe?? If it is , how can I do that?
Thanks!!

Hi shilpa,
it seems to be you are NEW to SDN. welcome. if you want to get solutions to your Questions, you have to post a NEW thread.dont use the existing thread to post your question.
any way i am giving you the solution for your question
LOOP AT ITAB WHERE F1 = <SOME VALUE>
F2 = <SOME VALUE>.
ENDLOOP.
IF SY-SUBRC = 0.
ITAB WILL HAVE THE LAST RECORD which satisfying the given criteria in WHERE clause of LOOP.
write itab <--this ITAB will have the last record.
ENDIF.
regards,
Srikanth.
Message was edited by: Srikanth Kidambi

How to extend MobileIconItemRenderer to display multiple lines of text?

Hi,
I am using Flex hero which has the added Mobile APIs.
Has anyone been able to extend the MobileIconItemRenderer to display multiple lines of text.
The current version of the MobileIconItemRenderer only displays 4 things: an image on the left, a label on the top to the right of the image , a message below the lable, which could be a sentence that can take multiple lines and an icon on the right.
So I would like to replace the messageField content with multiple single lines , one after the other.
Has anyone does this?
Otherwise, i suppose I would have to implement my own ItemRenderer if I want to customize the location of the components inside the item?
thank you

Hi,
I am using Flex hero which has the added Mobile APIs.
Has anyone been able to extend the MobileIconItemRenderer to display multiple lines of text.
The current version of the MobileIconItemRenderer only displays 4 things: an image on the left, a label on the top to the right of the image , a message below the lable, which could be a sentence that can take multiple lines and an icon on the right.
So I would like to replace the messageField content with multiple single lines , one after the other.
Has anyone does this?
Otherwise, i suppose I would have to implement my own ItemRenderer if I want to customize the location of the components inside the item?
thank you

Difference between line type and internal table?

Hi..
I wanted to know, what is the difference between Line type and Internal Table?

Hi,
Before the 4.7 release in SAP if we want to define an internal table we have to write the defination using the occurs statement and we need to define all the fields using INCLUDE STRUCTURE or indidually all the fields ine by one.
From 4.7 release of R/3 SAP introduced the Line type concept and it's part of the ABAP OOPS concept. for internal table defination we don't need to use the occur statements. Instead INCLUDE structure we need to create a Line type for that structure in Se11 and then we can define the internal table like :
DATA : ITAB TYPE TABLE OF <LINE_TYPE>.
Only thing is this table will be a table without header. So for internal table processing we need to define a work area structure of type line of line type . EX:
DATA: WA_ITAB TYPE LINE OF <LINE_TYPE>.
Hope this helps.
Thanks,
Greetson

Multiple line items in ESERVICE table

Hi All,
In production they moved out one BP from a premise and Moved in another BP in that premise.Now when they reverse both Move In and Move out they are getting multiple line items in ESERVICE table.In our case two shipper was created.How to avoid this issue?
Regards,
Avishek

You recieve in reference to the PO, not in reference to the 351 goods issue movements, hence SAP defaults just one item to MIGO.
If you get the quantity in one physical delivery, how can then the receiver know that it was issued with 3 different material documents?
if the receiver gets kowledge about 3 different goods issues from the accompaning paperwork then he amend the suggested quantity and post partial quantities.
if the goods issue was done with 3 material documents because of a certain reason like different batches, then the receiver can click the distribute icon to distribute the quantity of one item line in MIGO to several lines based on batch numbers.

Lines in an internal table?

How to get the number of lines in an internal table?

Hi
Check this
DATA: BEGIN OF line,
         col1 TYPE i,
         col2 TYPE i,
      END OF line.
DATA itab LIKE HASHED TABLE OF line WITH UNIQUE KEY col1
                                    INITIAL SIZE 10.
DATA: lin    TYPE i,
      ini    TYPE i,
      knd(1) TYPE c.
DESCRIBE TABLE itab LINES lin OCCURS ini KIND knd.
WRITE: / lin, ini, knd.
DO 100 TIMES.
line-col1 = sy-index.
line-col2 = sy-index ** 2.
INSERT line INTO TABLE itab.
ENDDO.
DESCRIBE TABLE itab LINES lin OCCURS ini KIND knd.
WRITE: / lin, ini, knd.
Hope it clarifies.
Praveen

Modify a line in an internal table

Hi Friends,
I have an internal table . I need to set a flag in the internal table and modify only that line of the internal table .Please advise .
ex :
Loop at itab.
If sys-subrc <> 0 .
itab-flag = 'X' .
Modify ?
endloop.
Thanks,
Teresa

data l_index type i.
Loop at itab.
l_index = sy-tabix
If sys-subrc <> 0 .
itab-flag = 'X' .
Modify itab INDEX l_index
endloop.
Regards,
Atish

Display ALV GRID Using Dynamic Internal Table

Hi all,
I try to display ALV Grid using Dynamic Internal Table, but when i activate my program, i get an error message "DYN_TABLE" is not type-compatible with formal parameter "IT_OUTTAB". ( DYN_TABLE is my Dynamic Itab).
Anybody can help me how to passing Dynamic Itab into ALV Grid ?? Of ALV Grid only accept static Itab ??
Thanks,

Hi Vijay,
It's doesn't work, and make new error "Formal parameter "IT_OUTTAB[]" does not exist. However, the parameter "IT_OUTTAB" has a similar name."
Because the method is:
CALL METHOD <ref. var. to CL_GUI_ALV_GRID>->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE = <any type (ANY)>
I_STRUCTURE_NAME = <string of type DD02L-TABNAME>
IS_VARIANT = <structure of type DISVARIANT>
I_SAVE = <var. of type CHAR01>
I_DEFAULT = <var. of type CHAR01>
IS_LAYOUT = <structure of type LVC_S_LAYO>
IS_PRINT = <structure of type LVC_S_PRNT>
IT_SPECIAL_GROUPS = <internal table of type LVC_T_SGRP>
IT_TOOLBAR_EXCLUDING = <internal table of type UI_FUNCTIONS>
IT_HYPERLINK = <internal table of type LVC_T_HYPE>
IT_ALV_GRAPHICS = <internal table of type DTC_T_TC>
CHANGING
IT_OUTTAB = <internal table>
IT_FIELDCATALOG = <internal table of type LVC_T_FCAT>
IT_SORT = <internal table of type LVC_T_SORT>
IT_FILTER = <internal table of type LVC_T_FILT>
Thanks,

Need to display multiple lines of output in adobe form..

hi,
i have an internal table data which needs to be displayed on my adobe form as multiple lines . how do i design my form in SFP ??
actually i alerady have a form whose layout is life one header line and one detail line..i dont see anywhere any property that i can set to say i want to repeat that detail line multiple times. so whats the way to do this ?
thks

Hi Jojit,
That was a bit helpful. But what i am looking for is that i will be having a table inserted in the layout with 2 rows. One in which i will type the header text and the other row will have the text elements in each of the column to hold the field values. So my design is predefined in the form. The example u show is a blank form to which we write rows of data. But i need some additions to it like drawing a table around it with a header line.
can we design that thru the driver program ?? or is there any other way ?
thks

Displaying multiples lines of an Internal table to Textedit.

Similar Messages

Maybe you are looking for