Displaying Name using ID

hi friends
my problem is i want to display name by using the id.
The id is being populated by a query in the user parameter.
In the Main Query I got the select statement as "SELECT CLIENT_ID,CLIENT_NAME FROM CLIENT
WHERE CLIENT_ID =:PARAM_CLIENT_ID"
At Runtime the user wants to see the parameters Printed on the report.
So In layout editor after the layout is printed i Selected the outermost frame and using Down Arrow key i dragged it down.
Then putting a TEXTBOX above i set the properties-->SOURCE--> "CLIENT_NAME".
But it gives me the error saying
"Field F_Name references Column Client_Name at a frequency below its group."
Can anybody give a SOLUTION how to print client_name at the place mentioned in the layout editor.
Many Many thanks in Advance.
null

Hi Ravi,
You can create a formula column in the Datamodel in which you return the client_name
based on the parameter.
Then in your layoutmodel, in the created field set the source to the Formula column.
That should do it...

Similar Messages

How can I get Sender Display Name using Get-MessageTrackingLog?

Hi, could you please help me. We have got a monitoring system at work which monitors some devices, so if something wrong happening with these devices email is sent from MASTER email (Customer Name <[email protected]>) to us. I'm trying to get a list
of all emails of that monitoring mailbox using PoweShell command
Get-MessageTrackingLog and export them to CSV file. In the end of the day I need CSV file with 3 columns: TimeStamp, MessageSubject and SenderDisplayName! Yes, I need Sender Display Name cause all emails are sent from one MASTER email
(Customer Name <[email protected]>) and only difference between them is sender Display Name which is cexactly what I need.
This is the code I'm using:
Get-MessageTrackingLog -EventId Receive | Select Timestamp, MessageSubject, Sender | Export-CSV C:\NagiosAlerts.csv
–NoTypeInformation
So how can I get sender Display Name(Customer Name) using Get-MessageTrackingLog insted of Sender email (<[email protected]>)?

The DisplayName is not recorded in the Logs only the EmailAddresses are so there Is nothing you can do with Message Tracking to get this the way you want. You need to look at another property may soureIP or include something in the Subject
of the Email (eg a customerId in the Subject is a much better option) to give you some differentiation. Otherwise you need to access the Email directly from the Mailbox it was sent to and then extract the DisplayName from the message (or use a journaling
on those emails etc)
Cheers
Glen

Tomcat web.xml "display-name" using flex.messaging.MessageBrokerServlet

       Hello,
When my web application starts with the BlazeDS servlet flex.messaging.MessageBrokerServlet defined in the web.xml we have an error because in the display-name defined at top level in web.xml we have some text containing character ':'. The error is traced to inside the function
         flex.management.BaseControl.getObjectName()
Which gets the object name, and this function calls
   BaseControl.getApplicationId()
which finally calls
ServletConfig.getServletContext().getServletContextName()
This will return or display-name from the web.xml with all it's text. This text contains among other characters the character ':'. We use this tag for the display in the Tomcat Manager to see version number and other of deployed project.
After retrieving this name it is appended in the getObjectName() function to a buffer, this StringBuffer that already contains flex.runtime. and now this name is appended (still with all that we are using for Tomcat Manager with ':' character and other). After the name, other things are appended. Our problem is that, after constructing this StringBuffer an instance of javax.management.ObjectName is created. In it's constructor it takes a String name as input. This String is parsed in base of characters ':', '*', '?', '\n' and so on, and since we have some of these characters in our display-name it all goes wrong.
   My question is, if this is a bug, a limitation or if it is documented that using flex.messaging.MessageBrokerServlet we can not use certain characters in the display-name of the web.xml?
   Greetings, Tim
   We are using
Tomcat 5.5.23
Jdk 1.5.0_14
blazeds-src-4.0.1.17657
part of web.xml
     <display-name>
         Version: 1.10.0.3 (01/02/2011), Environment development, AGP: 10.220.6.8:1557/AGPSVI, AGP_STAGE: host 10.220.6.8:1557/AGPSVI
     </display-name>
     <description>IMPRESA progetto con undergroung</description>
     <listener>
         <listener-class>flex.messaging.HttpFlexSession</listener-class>
     </listener>
     <servlet>
         <servlet-name>MessageBrokerServlet</servlet-name>
         <display-name>MessageBrokerServlet</display-name>
         <servlet-class>flex.messaging.MessageBrokerServlet</servlet-class>
         <init-param>
             <param-name>services.configuration.file</param-name>
             <param-value>/WEB-INF/flex/services-config.xml</param-value>
        </init-param>
         <load-on-startup>1</load-on-startup>
     </servlet>

I have found that this is a bug and there is an issue open at the "Adobe Bug and Issue Management System", BLZ-617. I don't know if work is in progress, but when that issue is closed the problem will be solved.
Greetings, Tim

How to get display name using PL/SQL

Hello i whish to know if any one know how get the url and the display name of a page group, i ask this because i what to make a dinamic menu usgin dinamic pages.
If any one know please let me know
Best Regards
Jose.

Jose -
Use the view WWSBR_ALL_CONTENT_AREAS.
The Content views are documented here: http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc1012/wwsbr_api_view.html
Regards,
Candace

Gmail Display Name Using Senders Nickname

Just had an embarrassing moment. On my GF phone she has a nickname for me instead of my name in my contact info.
Now when she sends email this Nickname appears on the To line on all outgoing messages. Problem is when she emails other folks and cc me, like business folks in this situation, the display name appears as my nickname not my real name. How do one avoid this?
Also, it looks like any correspondence that I am having with these folks the display name is this nickname. How does one go about fixing this?

What happens is she adds your contact by typing your name instead of "smoochieface"? Does she have your real name in her contacts? She can have your real name and also your nickname (it's an additional field). What happens if she turns off Prefer Short Name under Settings>Mail, Contacts, Calendar>Short Names?

How can I customise Thunderbird message columns to show sender raw address (not display name) and the "Received for" email address that was used to reach me?

I find it increasingly important to be able to see a sender's actual email address rather than just display name, as they usually don't show a company name - which a domain always would. Is there a way to customise settings/write a script/tweak files to add raw email & domain name columns? When dealing with a number of people at the same company it is hard to order or glance through a list of emails to find them. I also know 2 people with the same name at different companies and it is impossible to distinguish!
Secondly, as a related column addition, since a number of email aliases reach me it would be useful to have a column to show the "Received..for" part of the message source which reveals the actual email used in the To/CC/BCC which led to me. Again can this be tweaked or scripted?
I have programming experience but have not made add-ons and would be open to a suggestion which involves creating a custom add-on if adding columns with custom values is possible that way.
Best Regards,
Drew

Extended message headers can be searched from Edit/Find/Search Messages, or the folder context menu, by adding custom headers to the search criteria. So, you might be able to create a search on specific properties of a message.
The method of adding custom headers to searches is the same as the one described here for filters:
http://kb.mozillazine.org/Filters_(Thunderbird)#Custom_headers

Is it possible to have 2 display names (one for internal use; the other for external use) in Active Directory?

The idea:
When communicating amongst our own staff via email we'd like to see our display names in this format:
Firstname Lastname (Division/Department/Branch/Unit)
Whereas, when we send emails to people outside the company, we'd like to be seen as:
Firstname Lastname (Company Name)
Is this technically possible?
Regards,
Anthony

Please read about Exchange Simple Display Name if you are using Exchange in your environment. It should be suitable for your needs, but as far I know not every Exchange version support it.
In Exchange 2003 this Simple Display Name was at Advanced tab of user, but now..
With Exchange 2013, SimpleDisplayName is configured using Exchange Management Shell (EMS)
Example:
Set-Mailbox ALIAS -SimpleDisplayName $True
..and as with Exchange 2007/2010, you will need to enable UseSimpleDisplayName on RemoteDomain.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

ERROR ITMS-9000 "The bundle uses a bundle name or display name..." when uploading to iTunesConnect

I'm receiving the error "ERROR ITMS-9000 "The bundle uses a bundle name or display name associated with an Apple app." when uploading to iTunesConnect.
Version 1.0 or our app is currently on the App store, an I'm trying to upload a version 1.1.
I'm trying to change the name of the app from "Augsburg Now" to "Augsburg Gallery".
I changed the name in the App ID on developer.apple.com to "Augsburg Gallery, but left the ID as edu.augsburg.augsburgnow
I generated new Development and Distribution provisioning profiles, since the App ID name had changed.
In DPS App Builder, I changed the App name to "Gallery", and the Title (library view) in DPS App Builder to "Augsburg Gallery", and then created a new binary.
I changed the App Name in iTunes connect to "Augsburg Gallery"
I don't see the problem, since I left the bundle id, app id, etc. all unchanged.
Any ideas?

It sounds like you did everything right, Keith. I just did a similar thing recently to change my app name from "Digital Publishing Suite Tips" to "DPS Tips," so I know it's possible. In iTunes Connect, you submitted the app as a new version, not as a new app, right?
I would try building a new app and submitting it again.

Select distinct using LINQ and bound to a dropdown list with id and display name

Hi,
On one of my sharepoint page, I want to populate dropdown list with countries, namely
<asp:DropDownList ID="ddlCountry" runat ="server"></asp:DropDownList>
In the code, I use LINQ:
var country = (from p in dc.ProvCountries
select p.country_code ).Distinct();
ddlCountry.DataSource = country;
ddlCountry.DataBind();
I want the country_code to be the ID, while the country_name will be the display name in the dropdown, how can that be done?
Thanks in advance.

Hi,
The following code for your check.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
namespace WebApplicationLib
public partial class _Default : Page
protected void Page_Load(object sender, EventArgs e)
List<ProvCountries> list = new List<ProvCountries>();
list.Add(new ProvCountries { country_code = "201", country_name = "A"});
list.Add(new ProvCountries { country_code = "201", country_name = "B" });
list.Add(new ProvCountries { country_code = "202", country_name = "C" });
list.Add(new ProvCountries { country_code = "202", country_name = "D" });
var country = (from p in list select new { p.country_code, p.country_name }).DistinctBy(p => p.country_code).ToList();
ddlCountry.DataSource = country;
ddlCountry.DataValueField = "country_code";
ddlCountry.DataTextField = "country_name";
ddlCountry.DataBind();
ddlCountry.Items.Insert(0, new ListItem("Please select", ""));
class ProvCountries
public string country_code { get; set; }
public string country_name { get; set; }
static class DataDistinct
public static IEnumerable<TSource> DistinctBy<TSource, TKey>(this IEnumerable<TSource> source, Func<TSource, TKey> keySelector)
HashSet<TKey> seenKeys = new HashSet<TKey>();
foreach (TSource element in source)
if (seenKeys.Add(keySelector(element)))
yield return element;
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Using Lov display name but save id

problem: using Lov display name but save id

solution: put the LOV on the name and use formValue item for the ID with the viewInstance and viewAttribute, and make a mapping for the form value

Need to get IRole object using Roles Display Name

Hi,
I need to get IRole object using Roles Display Name. I had the below code in EP 2004 SP12 and it works. But the same code dont work in EP 2004s SP13
user = request.getUser();
profile = request.getComponentContext().getProfile();
String strRoles = profile.getProperty("Roles");
String strRole[] = strRoles.split(",");
IRoleFactory roleFactory = UMFactory.getRoleFactory();
String roleUniqueId = null;
int i = 0;
boolean flagRedirect = false;
for(i = 0; i < strRole.length; i++){
     try
          com.sap.security.api.IRole role = roleFactory.getRoleByUniqueName(strRole<i>);
          roleUniqueId = role.getUniqueID();
          if(!user.isMemberOfRole(roleUniqueId, true))
               continue;
          flagRedirect = true;
          break;
     catch(UMException ex)
     catch(IOException ex)
if(!flagRedirect){
Where property Roles will have comma separated roles display names like "com.ABC.ortho_reports,com.ABC.lawns_ortho_reports,com.ABC.executive_reports"
Please advise.

Thanks Mrudula for the response. Sorry for the delay in responding.
I get UMEException with the message "Role with uniqueName com.ABC.general not found"
But it works fine if i specify Role unique role (like pcd:portal_content/com.abc.Marketing_Workbench/com.abc.Roles/com.abc.general).
We are in the process of upgrading Portal environment from EP6.0 SP12 to EP7.0 SP13. Above scenario works fine in the older environment.

Display current page name using API ?

I want to display the current page name using a PL/SQL API. I can get it using smart text - current page item, but I need to get it programmatically using a procedure. Which one? What variable? If I need to pass values in, where do I get them?
Thanks,
John

You can use wwpro_api_parameters.get_value('_pageid','a') in a pl/sql item or UI template to get the value of the current page id. You can then use the page id to look up page attributes in the WWSBR_ALL_FOLDERS view. In a portlet, you have to use the reference_path instead of the 'a' as the second parameter.
Please note that is is an undocumented use of this API and is not guaranteed to work in future releases. However, it does work in 9.0.2 and 9.0.2.6. WWSBR_ALL_FOLDERS is not officially supported until the 9.0.2.6 version.
Regards,
Jerry
PortalPM

How to display Contribution Folder Name using Idoc Script

Hi, could ypu please tell me how can we display Contribution Folder name using Idoc script by passing dCollectionID. Appreciate your help on this. Thank you
Regards,
Ashok

You should be able to get it directly as dCollectionName, but might have to execute a query to fill in the result set first: select dCollectionName from COLLECTIONS where DCOLLECTIONID = ?

Using alternative display names on one email alias

Sometimes I'd like send email using one display name (ie "Mr. Happy") and sometimes with another ("Mr. and Mrs. Very Happy"), both using the same email account. Is there a way to set that up without creating a duplicate account? Thought I'd seen a reference, but can't find it now...

Thank you. This is great help-it's got me looking in the right direction.
I have not been managing aliases, so I'm wondering how to load the db and edit it. This is my first mail server and my first email setup for osx so I'm a newbie.
I've found the following resources:
http://developer.apple.com/documentation/Darwin/Reference/Manpages/man1/postalia s.1.html
and
http://developer.apple.com/documentation/Darwin/Reference/Manpages/man5/aliases. 5.html#//apple_ref/doc/man/5/aliases
But I'm a little lost as to how to edit the configuration file, and I'm a bit lost on where it is. I've found a file titled "aliases.db" within the /etc folder that I have opened with a text editor. It lists some of the email addresses in my company, but there's also some garbled information in it. So I believe this is the file I would need to edit, but I'm not sure.
Can you please give me a little more help as to how to edit this file and reload it? I really appreciate it.
-John

Use display name to send to

I have someone that I send email to frequently set up with a display name of "Anne". If I type "anne" into the TO field, it brings up a list of three or four, but the default one is someone I rarely use, who has "joanne" in her address. How can I make it default to the one I want? (I read a couple of help pages, but didn't find anything that fixed it.)

Thunderbird address search for auto insert now uses contains and it used to use begins with. So there is no solution for your request. Other than an enhancement bug requesting that the developers offer both options.
https://bugzilla.mozilla.org/

Displaying Name using ID

Similar Messages

Maybe you are looking for