Using Lov display name but save id

problem: using Lov display name but save id

solution: put the LOV on the name and use formValue item for the ID with the viewInstance and viewAttribute, and make a mapping for the form value

Similar Messages

InputListOfValues return display name but save the id

Hi,
I have a question about inputListOfValues. I have enabled the attribute xxxId in my VO as LOV and created the necessary view accessor. When running in the UI, I can see the LOV popup is launching correctly, and upon selecting the value in LOV, it returns the xxxId to the inputListOfValues input box. However, my requirement is to actually return xxxDisplay name to inputListOfValues inputbox, but when save, it is xxxId which got saved. Any ideas of how to achieve this? Seems like it's a common scenario and I tried to search for some sample codes for it, but could not find it.
Please help.
Thanks.
-Mina

May i know how to do this..
I have a employee form. I enter the name of employee.
I select the department name.
I want the corresponding department id to get populated.
The department id is the foreign key in the employee table.
I am using toplink and EJb and JSF
I have craeted data control from the EJB
Im dragging and dropping the data controls from data control palatte.
Thanks in advance
Thanks
Shri

Need to get IRole object using Roles Display Name

Hi,
I need to get IRole object using Roles Display Name. I had the below code in EP 2004 SP12 and it works. But the same code dont work in EP 2004s SP13
user = request.getUser();
profile = request.getComponentContext().getProfile();
String strRoles = profile.getProperty("Roles");
String strRole[] = strRoles.split(",");
IRoleFactory roleFactory = UMFactory.getRoleFactory();
String roleUniqueId = null;
int i = 0;
boolean flagRedirect = false;
for(i = 0; i < strRole.length; i++){
     try
          com.sap.security.api.IRole role = roleFactory.getRoleByUniqueName(strRole<i>);
          roleUniqueId = role.getUniqueID();
          if(!user.isMemberOfRole(roleUniqueId, true))
               continue;
          flagRedirect = true;
          break;
     catch(UMException ex)
     catch(IOException ex)
if(!flagRedirect){
Where property Roles will have comma separated roles display names like "com.ABC.ortho_reports,com.ABC.lawns_ortho_reports,com.ABC.executive_reports"
Please advise.

Thanks Mrudula for the response. Sorry for the delay in responding.
I get UMEException with the message "Role with uniqueName com.ABC.general not found"
But it works fine if i specify Role unique role (like pcd:portal_content/com.abc.Marketing_Workbench/com.abc.Roles/com.abc.general).
We are in the process of upgrading Portal environment from EP6.0 SP12 to EP7.0 SP13. Above scenario works fine in the older environment.

Using alternative display names on one email alias

Sometimes I'd like send email using one display name (ie "Mr. Happy") and sometimes with another ("Mr. and Mrs. Very Happy"), both using the same email account. Is there a way to set that up without creating a duplicate account? Thought I'd seen a reference, but can't find it now...

Thank you. This is great help-it's got me looking in the right direction.
I have not been managing aliases, so I'm wondering how to load the db and edit it. This is my first mail server and my first email setup for osx so I'm a newbie.
I've found the following resources:
http://developer.apple.com/documentation/Darwin/Reference/Manpages/man1/postalia s.1.html
and
http://developer.apple.com/documentation/Darwin/Reference/Manpages/man5/aliases. 5.html#//apple_ref/doc/man/5/aliases
But I'm a little lost as to how to edit the configuration file, and I'm a bit lost on where it is. I've found a file titled "aliases.db" within the /etc folder that I have opened with a text editor. It lists some of the email addresses in my company, but there's also some garbled information in it. So I believe this is the file I would need to edit, but I'm not sure.
Can you please give me a little more help as to how to edit this file and reload it? I really appreciate it.
-John

F4 for Editable field in ALV, display Name but capture ID

Hi Friends,
I have a ALV for which i have defined a Structure, which is passed to Fieldcatlog.
I have defined a Search help - ZUSER_NAME which has following fields to display.
USERID - USR02-BNAME
FNAME
LNAME
FULLNAME
So my structure for fieldcatalog has User-id which is linked to this search help with Domain XUBNAME.
So in my report i made this User-Id as editable and F4 available, everything is working fine.
when user does a F4, its displaying Userid,Fname,Lname and complete name.upon selection and save i am capturing the id and storing in the ztable.
But now i have a requirement that when user selects a value from this search help on F4, i need to display Fullname but capture the User Id. How can i do that?
This is something similar to the one we have in BSP- key-value pair.
how to do this in ALV.
Appreciate if someone can guide me thru.
Thanks,
Simha
Edited by: Simha on Sep 6, 2008 2:24 PM

hai , this is example code for editing the F4 display .. check out this
REPORT zalv_editf4display.
*Type pools for alv
TYPE-POOLS : slis.
*structure for t582a tbale
TYPES : BEGIN OF ty_table,
        infty TYPE infty,
        pnnnn TYPE pnnnn_d,
        zrmkz TYPE dzrmkz,
        zeitb TYPE dzeitb,
        dname TYPE dianm,
         davo TYPE davo,
        davoe TYPE davoe,
        END OF ty_table.
*Structure for infotype text
TYPES : BEGIN OF ty_itext,
        infty TYPE infty,
        itext TYPE intxt,
        sprsl TYPE sprsl,
        END OF ty_itext.
*Structure for output display
TYPES : BEGIN OF ty_output,
        infty TYPE infty,
        itext TYPE intxt,
        pnnnn TYPE pnnnn_d,
        zrmkz TYPE dzrmkz,
        zeitb TYPE dzeitb,
        dname TYPE dianm,
        davo TYPE davo,
        davoe TYPE davoe,
       END OF ty_output.
*internal table and work area declarations
DATA : it_table TYPE STANDARD TABLE OF ty_table INITIAL SIZE 0,
       it_output TYPE STANDARD TABLE OF ty_output INITIAL SIZE 0,
       it_pbo TYPE STANDARD TABLE OF ty_output INITIAL SIZE 0,
       it_ittext TYPE STANDARD TABLE OF ty_itext INITIAL SIZE 0,
       wa_table TYPE ty_table,
       wa_output TYPE ty_output,
       wa_ittext TYPE ty_itext.
*Data declarations for dropdown lists for f4
DATA: it_dropdown TYPE lvc_t_drop,
      ty_dropdown TYPE lvc_s_drop,
*data declaration for refreshing of alv
      stable TYPE lvc_s_stbl.
*Global variable declaration
DATA: gstring TYPE c.
*Data declarations for ALV
DATA: c_ccont TYPE REF TO cl_gui_custom_container,         "Custom container object
      c_alvgd         TYPE REF TO cl_gui_alv_grid,         "ALV grid object
      it_fcat            TYPE lvc_t_fcat,                  "Field catalogue
      it_layout          TYPE lvc_s_layo.                  "Layout
*ok code declaration
DATA:
ok_code       TYPE ui_func.
*initialization event
INITIALIZATION.
*start of selection event
START-OF-SELECTION.
*select the infotypes maintained
SELECT infty
          pnnnn
          zrmkz
          zeitb
          dname
          davo
          davoe
          FROM t582a UP TO 10 ROWS
          INTO CORRESPONDING FIELDS OF TABLE it_table.
*Select the infotype texts
IF it_table[] IS NOT INITIAL.
    SELECT itext
             infty
             sprsl
             FROM t582s
             INTO CORRESPONDING FIELDS OF TABLE it_ittext
             FOR ALL ENTRIES IN it_table
             WHERE infty = it_table-infty
             AND sprsl = 'E'.
ENDIF.
*Apppending the data to the internal table of ALV output
LOOP AT it_table INTO wa_table.
    wa_output-infty = wa_table-infty.
    wa_output-pnnnn = wa_table-pnnnn.
    wa_output-zrmkz = wa_table-zrmkz.
    wa_output-zeitb = wa_table-zeitb.
    wa_output-dname = wa_table-dname.
    wa_output-davo = wa_table-davo.
    wa_output-davoe = wa_table-davoe.
For texts
    READ TABLE it_ittext INTO wa_ittext WITH KEY infty = wa_table-infty.
    wa_output-itext = wa_ittext-itext.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
ENDLOOP.
Calling the ALV screen with custom container
CALL SCREEN 0600.
*On this statement double click it takes you to the screen painter SE51.
*Enter the attributes
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen ,
Here we can give a title and customized menus
*create 2 buttons with function code 'SAVE' and 'EXIT'.
GIVE A SUITABLE TITLE
*&      Module STATUS_0600 OUTPUT
      text
MODULE status_0600 OUTPUT.
SET PF-STATUS 'DISP'.
SET TITLEBAR 'ALVF4'.
ENDMODULE.                 " STATUS_0600 OUTPUT
calling the PBO module ALV_GRID.
*&      Module PBO OUTPUT
      text
MODULE pbo OUTPUT.
*Creating objects of the container
CREATE OBJECT c_ccont
       EXPORTING
          container_name = 'CCONT'.
create object for alv grid
create object c_alvgd
exporting
i_parent = c_ccont.
SET field for ALV
PERFORM alv_build_fieldcat.
Set ALV attributes FOR LAYOUT
PERFORM alv_report_layout.
CHECK NOT c_alvgd IS INITIAL.
Call ALV GRID
CALL METHOD c_alvgd->set_table_for_first_display
    EXPORTING
      is_layout                     = it_layout
      i_save                        = 'A'
    CHANGING
      it_outtab                     = it_output
      it_fieldcatalog               = it_fcat
    EXCEPTIONS
      invalid_parameter_combination = 1
      program_error                 = 2
      too_many_lines                = 3
      OTHERS                        = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDMODULE.                 " PBO OUTPUT
*&      Form alv_build_fieldcat
      text
     <--P_IT_FCAT text
*subroutine to build fieldcat
FORM alv_build_fieldcat.
DATA lv_fldcat TYPE lvc_s_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '1'.
lv_fldcat-fieldname = 'INFTY'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 8.
lv_fldcat-scrtext_m = 'Infotype'.
lv_fldcat-icon = 'X'.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '2'.
lv_fldcat-fieldname = 'PNNNN'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 15.
lv_fldcat-scrtext_m = 'Structure'.
lv_fldcat-icon = ''.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '3'.
lv_fldcat-fieldname = 'ITEXT'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 60.
lv_fldcat-scrtext_m = 'Description'.
lv_fldcat-icon = ''.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '5'.
lv_fldcat-fieldname = 'ZRMKZ'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 1.
lv_fldcat-scrtext_m = 'PERIOD'.
lv_fldcat-icon = ''.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '6'.
lv_fldcat-fieldname = 'ZEITB'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 5.
lv_fldcat-scrtext_m = 'Time constraint'.
lv_fldcat-edit = 'X'.
*To avail the existing F4 help these are to
*be given in the field catalogue
lv_fldcat-f4availabl = 'X'.
lv_fldcat-ref_table = 'T582A'.
lv_fldcat-ref_field = 'ZEITB'.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '7'.
lv_fldcat-fieldname = 'DNAME'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 15.
lv_fldcat-scrtext_m = 'Dialogmodule'.
lv_fldcat-icon = ''.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '8'.
lv_fldcat-fieldname = 'DAVO'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 15.
lv_fldcat-scrtext_m = 'Start'.
lv_fldcat-edit = 'X'.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '9'.
lv_fldcat-fieldname = 'DAVOE'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 15.
lv_fldcat-scrtext_m = 'End'.
lv_fldcat-icon = ''.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
*To create drop down for the field 'DAVO'
with our own f4 help
ty_dropdown-handle = '1'.
ty_dropdown-value = ' '.
APPEND ty_dropdown TO it_dropdown.
ty_dropdown-handle = '1'.
ty_dropdown-value = '1'.
APPEND ty_dropdown TO it_dropdown.
ty_dropdown-handle = '1'.
ty_dropdown-value = '2'.
APPEND ty_dropdown TO it_dropdown.
ty_dropdown-handle = '1'.
ty_dropdown-value = '3'.
APPEND ty_dropdown TO it_dropdown.
CALL METHOD c_alvgd->set_drop_down_table
    EXPORTING
      it_drop_down = it_dropdown.
LOOP AT it_fcat INTO lv_fldcat.
    CASE lv_fldcat-fieldname.
To assign dropdown in the fieldcataogue
      WHEN 'DAVO'.
        lv_fldcat-drdn_hndl = '1'.
        lv_fldcat-outputlen = 15.
        MODIFY it_fcat FROM lv_fldcat.
    ENDCASE.
ENDLOOP.
ENDFORM.                    " alv_build_fieldcat
*&      Form alv_report_layout
      text
     <--P_IT_LAYOUT text
*Subroutine for setting alv layout
FORM alv_report_layout.
it_layout-cwidth_opt = 'X'.
it_layout-col_opt = 'X'.
it_layout-zebra = 'X'.
ENDFORM.                    " alv_report_layout
PAI module of the screen created. In case we use an interactive ALV or
*for additional functionalities we can create OK codes
*and based on the user command we can do the coding.
*&      Module PAI INPUT
      text
MODULE pai INPUT.
*To change the existing values and refresh the grid
*And only values in the dropdown or in the default
*F4 can be given , else no action takes place for the dropdown
*and error is thrown for the default F4 help and font changes to red
*and on still saving, value is not changed
c_alvgd->check_changed_data( ).
*Based on the user input
*When user clicks 'SAVE;
CASE ok_code.
    WHEN 'SAVE'.
*A pop up is called to confirm the saving of changed data
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
          titlebar       = 'SAVING DATA'
          text_question = 'Continue?'
          icon_button_1 = 'icon_booking_ok'
        IMPORTING
          answer         = gstring
        EXCEPTIONS
          text_not_found = 1
          OTHERS         = 2.
      IF sy-subrc NE 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
*When the User clicks 'YES'
      IF ( gstring = '1' ).
        MESSAGE 'Saved' TYPE 'S'.
*Now the changed data is stored in the it_pbo internal table
        it_pbo = it_output.
*Subroutine to display the ALV with changed data.
        PERFORM redisplay.
      ELSE.
*When user clicks NO or Cancel
        MESSAGE 'Not Saved' TYPE 'S'.
      ENDIF.
**When the user clicks the 'EXIT; he is out
    WHEN 'EXIT'.
      LEAVE PROGRAM.
ENDCASE.
CLEAR: ok_code.
ENDMODULE.                 " PAI INPUT
*&      Form REDISPLAY
      text
--> p1        text
<-- p2        text
FORM redisplay .
*Cells of the alv are made non editable after entering OK to save
CALL METHOD c_alvgd->set_ready_for_input
    EXPORTING
      i_ready_for_input = 0.
*Row and column of the alv are refreshed after changing values
stable-row = 'X'.
stable-col = 'X'.
*REfreshed ALV display with the changed values
*This ALV is non editable and contains new values
CALL METHOD c_alvgd->refresh_table_display
    EXPORTING
      is_stable = stable
    EXCEPTIONS
      finished = 1
      OTHERS    = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " REDISPLAY

HT4108 iPad3/AV adapter used to display fullscreen, but not the last few weeks, anyone else encounter this issue?

I have an iPad3 and the Apple AV adapter. It was working fine with DS file and other apps that play movies, and used to display the movies full screen to my HDMI TV. But in the last few weeks, this changed. Any one else seen this happen?

http://discussions.apple.com/thread.jspa?threadID=2474499&tstart=0

JcomboBox How display names, but return ids?

I am implemeting a combobox from a table (id, name). I want display the names, but when the user select a item, I want to get the id corresponding to the name selected
How i make this?

Search the forum for my "Combo Box Item" (without the spaces) example.

Importing files with same name but different extensions

Hope I will be clear enough.
Lets say that instead of sending a file from Lightroom to an external editor, I open it directly in Photoshop.
When I'm done, I save the edited photo using the same name but in a different file format : IMG_1333.cr2 > IMG_1333.psd or IMG_1333.tif, and selecting the same folder location.
Then, I come back into Lightroom and synchronise the folder.
Why is the knew version of the picture not showing up beside the original file, despite the different extension ?
I notice that the different extensions ( .psd or .tif ) are recorded in the sidecar files field in the Metadata panel.
Of course, everything works fine if the file name is modified ( or just by selecting the "copy" option in Photoshop's "save as" dialog box ). Lightroom synchronise dialog shows the new photo to import.
So, why is Lightroom not making a difference between files with the same name but different format extensions ?
Thanks for any hint :-)
Gilles.

Gilles-
I think your problem is likely that you have the option to stack the copy with the original turned on. First, right-click on one of these photos and go to the stacking menu. If Unstack is not grayed out then you have a stack -- select Unstack to reveal all copies.
To change the automatic stacking of edited copies from Photoshop, when you next choose to edit a file, in the bottom left corner of the dialog is the check box for unstacking. Clear it, and that choice should "stick" until you change it again.
Hope this helps!
Tony

Active Directory requires display name for log in not logon name

I have a weblogic 10 server and I have created an Active directory authenticator. I can list the users and groups in the console.
The problem is that I can only logon using the Display name e.g. "Smith, Fred" and not the logon name e.g. "smithf"
I would like to logon using the logon name.
I have set in the Weblogic ActiveDirectoryAuthenticator
User Name Attribute: cn
User Object Class: user
Static Group DNs from Member DN Filter: (&(member=%M)(objectclass=group))
User From Name Filter: (&(cn=%u)(objectclass=user))
As I said - all works fine - but I want to be able to logon with the userlogon name and not the display name. Any ideas?

Hi,
In the end I managed to get it working by changing all references to cn in the above to sAMAccountName as follows:
User Name Attribute:      sAMAccountName
User from name filter:      (&(sAMAccountName=%u)(objectclass=user))
Group from name filter:     (&(sAMAccountName=%g)(objectclass=group))
Static Group Name Attribute: sAMAccountName
It seems to work, but I am not sure it is correct becasue I don't know much about AD.

Why does the display name in older messages change if I update my address book for that E-mail address?

I have recently installed Thunderbird 24.5.0 after upgrading a WinXP machine to Win7. I have discovered a strange problem with older mail that was imported from Outlook Express 6.
The pastor of my church uses a generic E-mail address <[email protected]>. This address belongs to the position, not to an individual. We recently had a new pastor come to the church, and I updated my entry for this E-mail address to reflect the new person's name. This is fine for new mail sent since the new person arrived, but Thunderbird has also applied the new name to older mail from the previous pastor. This is very confusing, since the current pastor could not have sent mail from that address prior to her start date.
How can I get Thunderbird to stop changing the Display Name in archival messages that were sent by the previous pastor prior to September 01, 2013? I have not encountered this situation before using Netscape 4.x Mail, Outlook Express 6, and Windows Mail (Vista version).

Of course it does. It looks for a match between the sender's email address and a Contact in your address book. You've edited the Display Name for this account so it gets applied to any message with that email address if that's how your Address Book is configured.
In the Contact card for this address, you can tell it whether or not to use the "real" email address within the message, or the Display Name from your Address Book. Telling it to use the name found in the message ''might'' resolve this, but it depends on how the sender has formatted it. If he includes his name then Thunderbird should be able to resolve it, and you just add both configurations to your Address Book as two separate Contacts, rather than modifying the existing entry.
However, in this situation you're using the same email address for two distinct people, so Thunderbird may not be able to know who sent the old messages. If both have sent using "rector@stpeterscobourg.org" without any personalization then Thunderbird won't be able to differentiate between them.
I have to say that I haven't recently tried using different display names with the same email address, so I don't know for sure if TB can use the display name constructively. If there's nothing in the old messages to tell you which sender wrote them, then TB can't do anything about it.

How to alter my display name when sending from an alias?

When sending emails from my iphone, using an alias, I've noticed that it sends it using my real name. This defeats the purpose of using an alias!
When I send it from my Mac using the mail app, or from icloud on the web, it uses the name I've designated for the alias, but this is not the case on my phone.
How can I get the mail app on my iphone to use the display name I've designated for the alias?

Just go to icloud.com and click the gear in the top right corner (Preferences). Then go to the "accounts" tab and click on the alias you are trying to use and then when it comes up, insert the name you would like to use. If there's any more questions you have, just reply.

Real name vs. Display name when registering for iOS Development program

Hi all,
I know that you need to register under your real name when signing up for the iOS dev program as an individual, and I'm fine with that. (I'm a sole developer, won't be setting up a company or LLC, so I'm going in as an Individual)
My issue is, do we have any control of what users will see as my developer name when they go to my app's page on the App Store, or MUST we use the FULL real name?
To clarify, I'm ok with using my real name, but my full name is really long (W. W. M. E. P. Gunetileke in initials), so would it be possible to use an abbrieviated version?
e.g. Show M. Gunetileke or E. Perera as the developer name instead of showing the name in its entirety.
IF its fine to put a display name like this, the next question is, what would be the legal ramifications when it comes to getting payments from Apple. I understand that money would be wired to whatever bank account I set up? Would there be an issue with this when not using your name in its entirety?
Cheers!

Thanks for your reply Michael.
As I said, using my real name is fine with me, but I was wondering whether we need to use the entire name as it is, or whether we may be able tu display a subset of it as the display name. Mine is ridiculously long, and it would be a joke to use the full name there
For e.g. in your case, would it be possible for you to have "M. Superczynski" as the displayed developer name instead of your full name?

Saving a copy of a document using a new name or location

I am trying to save a document under a new name and new location. I cannot find the "Save As" command in pages or keynote. How do I save a document using a new name or save the document into a new location?

It's a little different now. Instead of using Save As (which is now gone as you know) use Duplicate then save that document and give it the name and location you want.

Import Data using Full Table Name

Is there a way to run the import data wizard so when pulling data from a csv it generates an insert statement not only using the table name but using the Oracle Schema name -- ie fully qualified table name?

Hi Nilanjan,
I need help ASAP.
About this dump-load task, how does it works? Because I was checking out a package called Import SQL and this one only imports data from a table, however this table has to be allocated within the database that is being used, and I right? Are these 2 related somehow?
Does this task order BPC to find data from a SQL Table (allocated in a different server, different instance for SQL) and import it to SQL Fac2 table?
Can you help me with a simple explanation what do I need to do to run this task? The page help.sap.com talks shows a section within DumpLoad Task Usage which is called Importing Into SQL Server...
* Processing the Application using DumpLoad -
Importing into SQL
You can use DumpLoad to process the application as a standalone procedure, or with data import, export, or clear.
Prerequisites
The DumpLoad task (OsoftTaskDumpLoad2008.dll) is registered with Microsoft SSIS. See Registering Custom Tasks.
Procedure
1.Open a package or create a new package in Microsoft SSIS on the Planning and Consolidation server. i already did this for the DumpLoad task ... should I do this for the Import SQL task also ?
2.Select the task and add it to the package. WHAT DOES SELECT THE TASK MEAN?
3.Open the task, and choose Data Management None .
4.Enter the application set, application, and user ID.
Im getting confused, can you please provide more details about the whole procedure. Thanx in advance
Velázquez

Query Builder not locating emails based on email address, only the display name will work.

I am trying to set up some search folders for Outlook 2010 for emails either to or from a specific domain name. I am using the Query Builder to set up the logic for the search criteria.
Here's an example of what I am trying to do.
I have three people from a specific company that I want all emails I either send them or they send me to go to. Their email address are as follows:
Jane Doe <[email protected]>
John Doe <[email protected]>
Mary Smith <[email protected]>
Here is the issue I am having. When I set up the criteria for the search folder, entering From --> Contains --> [email protected] (or any of the other addresses mentioned above) will return no results. Entering From ---> Contains
--> companyxyz.com will yield no results. Only entering From ---> Contains --> Jane Doe will yield any results.
If I use the From field in the standard Messages Tab of the Search Folder Criteria window then just entering companyxyz.com will give me all the messages. The problem that I have is that I cannot set up any OR conditionals with this standard field
which is why I am using the Query Builder.
My question is why doesn't the actual email address work for a search criteria in Query Builder and how can I set up a criteria for a domain name (@companyxyz.com) so that I can see all communication with a particular company?

Hi,
This is the expected behavior of Outlook.
The Search Folder Criteria dialog has two From fields. One From field is under Messages tab and another From field is under the Advanced (or Query Builder) tab. The From field under Message tab uses email address while
the From field under Advanced or Query Builder tabs uses the display name. So, when we want to use Query Builder to create a Search folder that filters by email address, the Query Builder ignores the email address and uses the display name instead.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Using Lov display name but save id

Similar Messages

Maybe you are looking for