Displaying Row and Column Numbers

I see through other research on Oracle SQL Developer that I should be able to display the row and column numbers on version 1.5.4, but I don't see where to go to turn this on. Suggestions?

Suggestions?Ask in the SQL Developer forum?

Similar Messages

Is it possible to switch the rows and columns?

Is it possible to switch the rows and columns of a table? The reason I ask is that it would be easier for me to input the data with the number at the top of a column and the fields going down. But it would be easier to read the data with the number on the left and the fields going to the right. Is it possible to switch a table in this way?

mahongue wrote:
Is it possible to switch the rows and columns of a table? The reason I ask is
that it would be easier for me to input the data with the number at the top
of a column and the fields going down. But it would be easier to read the
data with the number on the left and the fields going to the right. Is it
possible to switch a table in this way?
It sounds to me as though you wish to transpose a table so that the original is changed from rows to columns and from columns to rows, as in the following:
Table 1
 A B C
========
1 o p q
2 r s t
3 u v w
Table 2
 A B C
========
1 o r u
2 p s v
3 q t w
You are right - it would be nice to have a menu item to magically transpose a selected block of cells. But there isn't one. So...
One way to solve this is to use the index() and transpose() functions to accomplish row and column cell transposition. If you are going to use a 1:1 cell correspondence and change the header columns and rows also, you can use this:
 =INDEX(TRANSPOSE(Table # :: <range>),ROW(),COLUMN())
where Table # and <range> is substituted as in the following fashion:
 =INDEX(TRANSPOSE(Table 1 :: $A$1:$C$3),ROW(),COLUMN())
Create a second table. Copy the modified formula above with the appropriate substitutions, select the range you wish to have your transposition inserted into (must match the transposed cell dimensions of the original range), paste the forumula and voila! the cells will be transposed.
Cautions:
o The target table must match the swapped cell length and width dimension. For example, if the original data range is 6 columns wide by 4 rows deep, then the corresponding table or range to hold the transposition must be 4 columns wide by 6 rows deep.
o If your transposed data block is to be offset from the origin of the new table, then you will need to include a subtractive offset into your cell formula, since in the transpose() function the data in the master data range is referenced from its position with the master range, not its cell position in the table. Such an offset is necessary because this example formula uses the target row and column numbers to arrive at indexed positions.
For example, if the new data range is to be offset one column to the right and one row below from the target table's origin then you must subtract (-1) from the cell and from the column references in the formula:
 Example:
 =INDEX(TRANSPOSE(Table 3 :: $B$2:$D$4),ROW()-1,COLUMN()-1)
If someone has a better solution I'd be glad to hear of it.

Rows and columns of rectangles

I am trying to replicate a portion of a script from an AS book which has tutorials on games. I have uploaded the files. I cannot seem to get the SWF to display the rectangles which are called "bricks" in the AS file. The class is "temp3" . . . doesn't really matter what it's called as long as it's not a reserved variable name I think and as long as no other AS files are calling it in my file directory. Flash CS4 Pro, AS3.0

I found out what was wrong with part of my AS file. I stated "for(var x:unit=0 . . . )"; instead I should have stated "for(var x:uint=0 . . . )". However now the Compiler Error reads 1180: Call to a possibly undefined method makeBricks. I am interested in knowing what is the proper way to organize or structure my AS file so that it can read the public function "makeBricks()". If I remove the package call, the public declaration, and the private declaration and embed the AS code into the first frame of a new FLA file I can get the SWF to display what it is supposed to display--rows and columns of rectangles. Why can't I get it to work with an external AS file? Can anyone please help? Thanks a mil in advance.
-markerline

How can i open a PDF bank statement in numbers so that the rows and columns contain properly aligned data from statement?

how can i open a PDF bank statement in "numbers" so that the rows and columns contain properly aligned data from statement?

Numbers can store pdfs pages or clippings but does not directly open pdf files. To get the bank statement into Numbers as a table I would open the bank statment in Preview (or Skim) or some pdf viewer.
Then hold the option key while selecting a column of data.
Then copy
Then switch to numbers and paste the column into a table
Then repeat for the other columns in the pdf document
It would be easier (in my opinion) to download the QFX or CSV version from your bank

How to preserve a row and column in numbers automatically.ie the cells are not consecutivecell a1 a3 etc

working on a league table
when sorting the league table ,I need to preserve the row and column
I can preserve row and column by using the drop down menu on every cell,but would like to do it automatically(2 clicks to every cell)
working in numbers
yosemite 10.2

This technique would be quite slow. Unfortunately, it's the only way I could think of if it's really an Excel file. If it's tab delimited file, you could read a whole thing into 2D array and work on Array instead of reading cell-by-cell.

How can I make Numbers respect the row and column locks in an Excel workbook opened in Numbers???

I have a Windows server app that generates Excel workbooks to be emailed to political campaign volunteers to be loaded into Numbers on an iPad, edited, then emailed back to be posted to the server database. There are two problems encountered:
1. The Excel workbook has the first row (column headings) and first column (route identifier) of cells locked, so that they will not scroll off the screen, but Numbers doesn't respect the locks, so when the user scrolls horizontally or vertically, the column headings and/or the route identifier scroll off the screen.
2. The Excel workbook has pop-up "tool-tip" type comments in certain column headings in order to provide the user with the acceptable entries for those columns, but Numbers does not respect those. When the user touches any of the commented column heading cells, a context menu appears instead of the comment.
What must I do in the Excel workbook sheets, or what settings can be made in Numbers to correct the above?

I imported a Numbers '09 file into Numbers on the iPad. All comments were removed during import. Frozen header row and column were retained.
Thank you for your responses I must ask, however, when you refer to "importing" the Excel file, are you referring to a two step process whereby the Excel file is first converted by some other process into Numbers format, then opened in the Numbers application - which is what I have to do in my PC application to generate the Excel file, and reverse that process to convert the Excel back into my database format - or are you simply referring to opening the file in Numbers as "importing" it? And please excuse any ignorance, as I'm not at all familiar with Apple's terminologies. In fact, I don't own an iPad myself, but rather I have to depend on one of my clients to do the testing for me.
I imported an XLSX file into Numbers on the iPad. The file used "freeze panes" to "freeze" the first column and row. Only warning on import was that it changed fonts. It imported without the first row and column frozen and with no comments. Nothing I can do about the missing comments but it was a simple matter to turn the first column & row into headers and freeze them.
Unfortunately this would not be an efficient solution, since the end users are, for the most part, elderly political campaign volunteers who are fairly computer illiterate. These workbooks are actually canvassing lists - known as walklists. Their purpose is for the volunteers to interview voters, record the results of the interviews, and post the results to a database, which provides the campaigns with valuable strategizing capabilities. Also, these workbooks have multiple pages - as many as 10 or more. and from what I infer from the above, the setting changes would have to be made on each page.
My whole intent in developing this iPad/Tablet methodology was to significantly reduce volunteer's work - which is a recruitment benefit - and eliminate paper. While the latter would be accomplished, the former would not, and in fact would tend to increase it. It's necessary to keep the first row - column headings - and the first column - the route identifier - from scrolling off the page, so that the volunteer won't have to keep scrolling up and down and right and left to know what the data are.
Conclusion: Comments are not supported on the iPad version of Numbers. Frozen headers are not imported from Excel but can be recreated easily.
I was previously directed to the Apple website http://www.apple.com/ipad/from-the-app-store/apps-by-apple/numbers.html which extols the wonders of the Numbers application. About halfway down the page there's a section regarding, "Sliders steppers and pop-ups". The web page states that pop-ups can be set up but, being a marketing site, gives no indication whatsoever as to how it's done. I was hoping someone could tell my if there's any way to carry them over from an Excel file.

How can I preserve row and column addresses on multiple cells at once in Numbers?

How can I preserve row and column addresses on multiple cells at once in Numbers 3.2.2? I do a lot of rearranging and sorting and want to reference cells in other sheets. After entering the formulas (example: '=Sheet1::Table 1::H126') I will sort the table and the formulas will not move with the sort. I think I can fix this by going cell by cell checking the 'preserve row' and 'preserve column' boxes when editing the formula. I want to avoid having to go one by one. I know that checking the boxes creates a formula like this: '=Sheet1::Table 1::$H$126' I have also tried entering this manually and filling down but it doesn't include the preservations (the $$) in the autofill. If there is another way to remedy my sorting problem that would also be welcomed!
THANKS!!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

Can anybody help....SQL to display row as column and column as rows

Can anybody help in writing a SQL to display row as column and column as rows?
Thanks

check this link:
Re: Creating Views - from rows to a new column?

ROW AND COLUMN WIE IN NUMBERS ON IOS

I do not find a way or any previous discussion about this.
Of course I could use the first row and column to give nemes to them but this is not the best solution.
Any suggerstion ?
I would like to see the row numbers and column letters and keep them on place while scrolling in numbers and in numbers converted files from Excel.
Thanks

I do not find a way or any previous discussion about this.
Of course I could use the first row and column to give nemes to them but this is not the best solution.
Any suggerstion ?
I would like to see the row numbers and column letters and keep them on place while scrolling in numbers and in numbers converted files from Excel.
Thanks

How to display 2 dimensional data. i.e with rows and columns?

Hi,
I want to know how to display multiple, variable
rows and columns that are got from the database through
queries in forms.
(i,e. a Matrix of Values,something similar to an Excel Spreadsheet).
Is there a component in forms similar to JTABLE that is
available in Java through which MULTIPLE, VARIABLE
rows and columns can be displayed ?.
I am not using a base table since this data is got thru
a number of packages and procedures that are used in
Loops.
NOTE : I am using forms 6i.
Thanks
Sharath.

I've heard Grant mention adding a Grid component to the Forms toolbox. From the context I would guess this is not yet even under development, so it's not going to be available anytime soon. And not for 6i.
Sorry, APC

Best way to average numbers across rows and columns

Hello,
What is the best way to average numbers both that span across both rows and columns?
I have a table that holds student names (y-axis), tests they take (x-axis), and their scores. I need to average the student's scrore for all tests and also average the test scores for all students.
How should I go about saving the data so I can then do some maths on it?
Thanks.

So far it looks like jQuery might be the way to go. It seems to be working out quite splendedly. I would still be curious to know how somebody might do this with CF.

Displaying the Row and Column number in the report

I am trying to show row and column number in the report (not just web preview). I am using Hyperion Reports Version 7.2.5.168

use a formula column/row. use RANK function in that. (e.g. Rank([A], asc) will sort the rows based on column A values in ascending order)
you can use this rank in your heading.
But frankly this is not so easy. You have to do it in a very intelligent way, so that rank gives you column number/row number any how.
Have a try and let see if you find a appropriate solution.
Regards,
Rahul

Display of Row and Column Headers in NW2004s Bex Analyzer

Hi all,
when I open a query with the NW2004s Bex Analyzer (Excel)Frontend Row and Column Headers are not visible. I need to go to "Tools-Options" and check the box for "Row and Column Headers" which seems to be unchecked by default.
Is there a possibility to make the Row and Column Headers visible by default when I open a query so that I don't have to use Tools-Options every time.
Thanks
Alex

This is fixed with SP8. The default template doesn't have this specified in SP7. It's a very easy fix. Just specify that the column headers are specified by default. Then save this new workbook as the global workbook template such that all queries use this new template. You can customize this standard template however you like!

Setting number of rows and columns

How do I set the number of rows and columns of a table, say 2348 rows by 3 columns?
Then how do I quickly select the last row?
Also, if I enter a formula in row 1 column 2, how do I quickly copy that formula down to row 1435, or to the end of the column? Dragging seems slow and awkward.

I wish to add a few words to Jerrold responce.
gjf12 wrote:
How do I set the number of rows and columns of a table, say 2348 rows by 3 columns?
Then how do I quickly select the last row?
Also, if I enter a formula in row 1 column 2, how do I quickly copy that formula down to row 1435, or to the end of the column? Dragging seems slow and awkward.
The process that you describe is inefficient.
The efficient one is :
create a table
enter the formulas in a single row
delete the rows below.
Now, each newly inserted row will contain the formulas.
From my point of view, it's when this is done that it will be interesting to apply a script adding rows.
Here is a script inserting rows.
--[SCRIPT insertRows]
Enregistrer le script en tant que Script : insertRows.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule au-dessous de laquelle vous voulez insérer des lignes.
menu Scripts > Numbers > insertRows
Le script vous demande le nombre de lignes désiré puit insère celles-ci.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
--=====
Save the script as a Script: insertRows.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell below which you want to insert rows.
menu Scripts > Numbers > insertRows
The script ask you the number of rows to insert then it does the required insertion.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Save this script as a … Script in the "Folder Actions Scripts" folder
<startupVolume>:Library:Scripts:Folder Action Scripts:
--=====
Yvan KOENIG (VALLAURIS, France)
2010/01/13
--=====
on run
set defaultValue to 100
if my parleAnglais() then
set myInteger to my askAnumber("Insert how many rows ?", defaultValue, "i")
else
set myInteger to my askAnumber("Combien de lignes voulez-vous insérer ?", defaultValue, "i")
end if
set {dName, sName, tName, rname, rowNum1, colNum1, rowNum2, colNum2} to my getSelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
repeat myInteger times
add row below row rowNum2
end repeat
end tell
end run
--=====
on getSelParams()
local r_Name, t_Name, s_Name, d_Name, col_Num1, row_Num1, col_Num2, row_Num2
set {d_Name, s_Name, t_Name, r_Name} to my getSelection()
if r_Name is missing value then
if my parleAnglais() then
error "No selected cells"
else
error "Il n'y a pas de cellule sélectionnée !"
end if
end if
set two_Names to my decoupe(r_Name, ":")
set {row_Num1, col_Num1} to my decipher(item 1 of two_Names, d_Name, s_Name, t_Name)
if item 2 of two_Names = item 1 of two_Names then
set {row_Num2, col_Num2} to {row_Num1, col_Num1}
else
set {row_Num2, col_Num2} to my decipher(item 2 of two_Names, d_Name, s_Name, t_Name)
end if
return {d_Name, s_Name, t_Name, r_Name, row_Num1, col_Num1, row_Num2, col_Num2}
end getSelParams
--=====
set {rowNumber, columnNumber} to my decipher(cellRef,docName,sheetName,tableName)
apply to named row or named column !
on decipher(n, d, s, t)
tell application "Numbers" to tell document d to tell sheet s to tell table t to return {address of row of cell n, address of column of cell n}
end decipher
--=====
set { d_Name, s_Name, t_Name, r_Name} to my getSelection()
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
tell application "Numbers" to tell document 1
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
try
(selection range of table y) as text
on error errMsg number errNum
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
return {theDoc, theSheet, theTable, theRange}
end try
end repeat -- y
end if -- x>0
end tell -- sheet
end repeat -- i
end tell -- document
return {missing value, missing value, missing value, missing value}
end getSelection
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
Asks for an entry and checks that it is an floating number
set myInteger to my askAnumber(Prompt, DefaultValue, "i")
set myFloating to my askAnumber(Prompt, DefaultValue, "f")
on askAnumber(lPrompt, lDefault, ForI)
local lPrompt, lDefault, n
tell application (path to frontmost application as string)
if ForI is "f" then
set n to text returned of (display dialog lPrompt & " (" & (1.2 as text) & ")" default answer lDefault as text)
try
set n to n as number (* try to convert the value as an number *)
return n
on error
if my parleAnglais() then
display alert "The value needs to be a floating number." & return & "Please try again."
else
display alert "La valeur saisie doit être un nombre décimal." & return & "Veuillez recommencer."
end if
end try
else
set n to text returned of (display dialog lPrompt default answer lDefault as text)
try
set n to n as integer (* try to convert the value as an integer *)
return n
on error
if my parleAnglais() then
display alert "The value needs to be an integer." & return & "Please try again."
else
display alert "La valeur saisie doit être un nombre entier." & return & "Veuillez recommencer."
end if
end try -- 1st attempt
end if -- ForI…
end tell -- application
Here if the first entry was not of the wanted class
second attempt *)
tell application (path to frontmost application as string)
if ForI is "f" then
set n to text returned of (display dialog lPrompt & " (" & (1.2 as text) & ")" default answer lDefault as text)
try
set n to n as number (* try to convert the value as an number *)
return n
on error
end try
else
set n to text returned of (display dialog lPrompt default answer lDefault as text)
try
set n to n as integer (* try to convert the value as an integer *)
return n
on error
end try -- 1st attempt
end if -- ForI…
end tell -- application
if my parleAnglais() then
error "The value you entered was not numerical !" & return & "Goodbye !"
else
error "La valeur saisie n’est pas numérique !" & return & "Au revoir !"
end if
end askAnumber
--=====
on parleAnglais()
local z
try
tell application "Numbers" to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
Yvan KOENIG (VALLAURIS, France) mercredi 13 janvier 2010 12:43:34

How do I delete multiple rows and columns in an image?

I am looking into how digital SLRs extract video data from a CMOS sensor. To give an example, the GH1 from Panasonic can record video at 1920 x 1080 from a 12 MPixel sensor that, say, is 4000 horizontal x 3000 vertical. How they do that seems to be not in the public domain, but there have been a few guesses (see http://www.dvxuser.com/V6/showthread.php?t=206797 and http://luminous-landscape.com/forum/index.php?showtopic=38713).
One approach would be to simply read every second row of sensor pixels (1500 rows read from the original 3000) and once you have those in memory, delete every second column (2000 columns left). You would end up with a 2000 x 1500 image which could then be resampled to 1920 x 1080.
I'd like to simulate what the camera appears to be doing, by generating a 4000 x 3000 test image and then asking Photoshop CS4 to delete the appropriate rows and columns. It may not necessarily be every second row; the Canon 5DMk11 appears to read every third row, so I may need to delete two out of every three rows.
Can Photoshop do that sort of thing? If so, how?

Thanks for the suggestions. Yes, I did take a detailed look at your images, but they weren't 100% convincing because it wasn't clear just what was happening. And Adobe's explanation, after reading it again, explains nothing at all to someone who doesn't know how Nearest Neighbor works.
But you are correct -- Nearest Neighbor does effectively delete pixels. I proved it with the attached 6 x 6 image of coloured pixels (the tiny midget image right after this full stop -- you'll have to go to maximum zoom in PS to see it).
These are the steps to delete every second row and then every second column.
1. Select Image > Image Size.
2. Set Pixel Dimensions > Height to half the original (in this case set to 3 pixels).
3. Set Resample Image to Nearest Neighbor.
4. Click OK and the image shoould now consist of three vertical white strips and three vertical Green-Red-Blue stripes.
5. Repeat steps 1-4, but this time set Pixel Dimensions > Width to half the original (in this case set to 3 pixels). The image should now consist of three horizontal stripes Green-Red-Blue.
Just to make sure the method worked for every third pixel, I repeated the above steps but with 2 pixels instead of 3 and obtained the correct White-Green, White-Green pattern.
I resampled the Height and Width separately for the test so that I could see what was happening. In a real example, the height and width can be changed at the same time in the one step, achieving the same results as above.
Finally, how to explain how Nearest Neighbor works in the simple cases described above?
Division by 2
In the case of an exact division by two (pixels numbered from top leftmost pixel), only the even numbered rows and columns remain. To put it a different way, every odd numbered row and column are deleted.
Division by 3
Only rows and columns 2, 5, 8, 11... remain.
Division by N
Only rows and columns 2, 2+N, 2+2N, 2+3N... remain.
To put it simply, a resample using Nearest Neighbor (using an exact integer multiple) keeps every Nth row and column, starting from number two. The rest are deleted.

Displaying Row and Column Numbers

Similar Messages

Maybe you are looking for