Displaying selected values to be displayed in a Column

Hi Friends,
I am using a table that contains TITLE,DESCRIPTION,ID
FOR EXAMPLE for my title record value i have stored as,
TITLE -
India_35534957934
Country_4356365
I want to display only letters before the _ symbol like
India
Country
like this pls help me how to achieve this
THANKS IN ADVANCE

There are several ways to do string manipulation such as this. A few examples include:
SELECT PARSENAME(REPLACE(TITLE,'_', '.'), 2) FROM Table1
SELECT SUBSTRING(TITLE,0,CHARINDEX('_', 'TITLE')) FROM TABLE1
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Similar Messages

Getting the selected value in tableview.

Hi friends,
In tableview am displaying some 5 columns in which one column is in dropdown.I want to modify the tableview.But unable to get the selected value at the particlular cell
(the column which is in dropdown) in tableview.
I have tried by using the method GET_CELL_ID.and get_form_field also.But am not getting the selected value only for this column.For remaining columns am getting the values properly.
Can anybody pls help me how should i catch the selected value for a particular column in tableview.
Thanks in advance.
Regards
sireesha

in the cell you are rendering a dropdwonlistbox, so to read the content of the same use
data: data type ref to cl_htmlb_dropdownlistbox.
data ?= cl_htmlb_manager=>get_data( request      = runtime->server->request
                                          name         = 'dropdownListBox'
                                          id           = 'DDLB1'
      if data is not initial.
        tab1sel = data->selection.
      endif.
for id use the same id given in the interator-render_cell_start method for this
Regards
Raja

How can I just display the selected value of a listbox in a report without the reverse display and selection buttons?

I am using a table which contains a text field with a lookup. I want to use the selected value of this field in a form which is acting as a selection form. No editing of the field's value is permitted. How do I just display the value of the field (which
is considered a listbox on the form) without the reverse display and the up and down selection buttons.
I can provide an illustration of the condition I am trying to overcome, but this system doesn't accept it.
Thank you for any suggestions or clarification you can provide.
Marj Weir

Thank you. I'll try that approach.
I found, after much experimentation, on a similar problem involving a multiselect lookup field, that if I make the field invisible, and add a textbox that displays the fieldname plus .column(0), it displays all the selected entries.
E.g.: staff.Column(0)
Staff is the field containing the last names of selected staff members.
staff.Value only shows the first name in the lookup list whether it is checked or not, so this is useless.
staff.column(0), however, (inexplicably) shows all the selected names, e.g. Jones, Smith, Wiggins.
Marj Weir

How to display selected value in MessageChoice

HI,
I have a messageChoice on my Update screen. I need to display the selected value when the user comes to update the data on the screen. In the Process Request when i am printing the stmt
System.out.println("The type of bean is PortletItemID::"+webBean.findIndexedChildRecursive("PortletItemID"));
The output is The type of bean is PortletItemID:: OAFormValueBean
How can i set the value that is coming from database in order to show the selected value in the message choice when the user is coming to the screen for updating the data.
Thanks,
Mohammadi

Hi Tapash,
In my case, i have mentioned the value in picklist View Definition ,picklist display attribute and picklist Value attribute. Where should i be providing my database value so that i can compare and display it as selected value.
Thanks,
Mohammadi

Select list: Display the selected value using JSP

Hi
I have a select list with a set of values and when I select a value from the list I want the selected text to appear on the screeen. How do I display the selected value?
Please help:
Here is the code for the list:
<select name="arraySelect" size="8" onclick="">
<%for (int i = 0; i < dumpArray.length; i++) {
if( i == 3){
%>
<option value="<%=dumpArray%>" selected><%=dumpArray[i]%></option>
<% i++;} else %>
<option value="<%=i%>"><%=dumpArray[i]%></option><p>
<% } %>
</select>
<% String name;
name = request.getParameter("arraySelect");
out.println(name);
I tried request parameter but it did not help. How can I do it?

did you submit your page?

Dropdown value list selected value not being displayed

HCM process and form - Using HR Admin control library in Adobe form to create a new drop down list as per OSS Note Note 973170 - New library for "SAP Interactive Forms by Adobe" - HR Admin Drop Down box list.
User is able to choose values from dropdown list. But, when form is sent for approval, approving user is not seeing selected value.
Thanks,
Karu

Hi karu,
Follow the below steps,
1. Place the dropdown list box in the form
2.bind the attributes to the dropdown.
3.In Object tab Property Click List Item, One Pop up Window is displayed,
   In the popup window,
                       i. Bind the dropdown list attributes to the items.
                       ii. $ symbol assigned to the Item text
                       iii.$ symbol assigned to the item value.
by
Parthasarathi

Displaying ui element when selecting value from dropdown

hi,
i have a requirement when user select value from dropdown( some x from dropdown) textedit ui(where user can enter some text) should be displayed and submitted. please give some idea

Hi Babanmohi ,
First create a node in your context and under that create an attribute. Then add a Dropdown by Index and TextEdit UI on to your view. Bind both the UI element with the same attribute.
Then create an action on onSelect event of the DropDown UI element. Go to its implementation and write the following:
wdContext.current<Node name>Element.set<attribute name>(wdContext.current<Node name>Element.get<attribute name>)
For example, if in my context there is a node called testnode and under that if im having an attriburte called name, then do the following coding in the onSelect method of dropdown:
wdContext.currentTestnodeElement().setName(wdContext.currentTestnodeElement().getName());
Reply me if you have any issues
Regards,
Jithin

Selected Values not displaying in Multiselect Prompt

Hi all,
We are having reports with Multiselect Prompts. When we select values , we are unable to see the corresponding values. Is their any rule like Multiselect Prompt won't work if there are Null values in it..

Hi,
There is no case that if your column contains NULL values multi select prompt wont work.
It should work irrespective of values in column.
Just check that you have selected Control as Multi select for Prompt column.

How to make the display of custom column names in UWL(not bother abt values

Hi all
i want to make the display of custom column names in UWL ( for example GP)
i dont want or not looking about values for those custom columns . i know that thru custom connector we can achieve to retrieve the values for those custom columns. but currently i am looking only just to display the custom column names( for example GP custom column names, just i want to display the name of the columns ) in UWL .
Thanks
Sunil

Hello Prashant,
You can add the control to your custom pagelayout, the following article has an example:
http://spandps.com/2012/02/22/showing-the-audience-target-field-in-an-editmodepanel-sharepoint-sp2010-in-projectserver-ps2010/
Btw, the SPFieldTargetToControl has a required property:
http://msdn.microsoft.com/en-us/library/microsoft.office.server.webcontrols.fieldtypes.spfieldtargettocontrol.required(v=office.14).aspx
- Dennis | Netherlands | Blog |
Twitter

Error while attaching document to report on Portal - Invalid selection valu

Hello All,
We are running our reports on Portal and as per the business requirement the users have to create comments or attach documents to certain amounts in certain columns and once they create the comment a document icon shows up near that amount (for example there are 3 columns Budget, actual, balance then the user have to create comment for some amounts which needs explanation) they do that from context menu Documents -> Create new Comment.
Now we want those documents to be saved on Infoprovider level and not on master data for any particular object. We have activated the flag "Characteristic is document property" on related infoobjects. We have the flag to display document icon on Infoprovider active in the web template. Now when I run the report I am able to create new comments on first two columns and when the report refreshes it shows me icon near that amount but it gives me errors on third column after the report refreshes itself. Now when I go in portal KM repository where documents are stored I do see the document that I created for the third column as well so looks like the document is getting created and being stored but the issue is when it tries to display the icon on that third column.
The error I get is this:
The initial exception that caused the request to fail was:
Invalid selection value: AttributeMember
com.sap.ip.bi.bics.dataaccess.resource.impl.bi.exceptions.BicsResourceBwRuntimeException: Invalid selection value: AttributeMember
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.setLowForced(ProviderRange.java:297)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.setLow(ProviderRange.java:291)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.selection.ProviderRange.set(ProviderRange.java:469)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.selection.SingleMember.set(SingleMember.java:125)
at com.sap.ip.bi.km.common.assignment.AssignmentMember.isContained(AssignmentMember.java:192)
Please give some inputs if anyone is facing same problem or is anyone has worked previously with this kinda of stuff.
Thanks in advance.
Kiran

Hi!
Have you solved this problem? I have the same problem after a SPS implementation (SPS 17). The message appears when we select a single value in a DP (hierarchical filter item) that filters another one, but when I select a node it doesn't.
Before the patch implementation the apliccation worked ok.
Any idea?
Thanks in advance.
Jose

Problem in displaying the TaxRate columns .

Hi Experts,
                        I am having a problem in displaying the 'TaxRate', in this Query there are some different Taxrate's columns like- ' 'Basic Excise Duty BED@10 %', ' Education ces@2% ' , 'Secondary Education Cess @1%',    etc.   only 4 -5 tax's value should display at a time and rest of the TaxRate's columns whose value is NULL should not display.
So, I want to display only those TaxRate's columns whose value is not NULL and If there is no value for any taxrate's column in the data, then it should Display only 'Excempt' column.
This is my query...
SELECT DISTINCT OSTA.Code , ORPC.DocNum AS 'Debit Note No.', ORPC.CardName AS 'Name', ORPC.CardCode AS 'code', ORPC.NumAtCard AS 'Supplier Ref.' ,
                      RPC1.Dscription AS 'Description of Goods', ORPC.Address, RPC1.Quantity, RPC1.Price AS 'Rate', RPC1.LineTotal AS 'Amount', ORPC.DocDate,
                          (SELECT DISTINCT TaxRate
                            FROM          RPC4
                            WHERE      (staType = - 90) AND (StaCode = 'BED@10') AND (DocEntry = RPC1.DocEntry)) AS 'Basic Excise Duty BED@10 %',
                         (SELECT DISTINCT TaxRate
                            FROM          RPC4 AS RPC4_8
                            WHERE      (staType = - 60) AND (DocEntry = RPC1.DocEntry)) AS 'Education Cess @2%',
                         (SELECT DISTINCT TaxRate
                            FROM          RPC4 AS RPC4_7
                            WHERE      (staType = - 55) AND (DocEntry = RPC1.DocEntry)) AS 'Secondary Education Cess @1%',
                         (SELECT DISTINCT TaxRate
                            FROM          RPC4 AS RPC4_6
                            WHERE      (staType = 4) AND (StaCode = 'CST2') AND (DocEntry = RPC1.DocEntry)) AS 'Central Sales Tax(CST)',
                         (SELECT DISTINCT TaxRate
                            FROM          RPC4 AS RPC4_5
                            WHERE      (staType = 1) AND (StaCode = 'VAT4') AND (DocEntry = RPC1.DocEntry)) AS 'Input VAT@5%',
                          (SELECT DISTINCT TaxRate
                            FROM          RPC4 AS RPC4_4
                            WHERE      (staType = 1) AND (TaxRate = 12.500000) AND (StaCode = 'VAT12.5') AND (DocEntry = RPC1.DocEntry)) AS 'VAT12.5%',
                       (SELECT DISTINCT TaxRate
                            FROM          RPC4 AS RPC4_3
                            WHERE      (staType = 18) AND (StaCode = 'Add2') AND (DocEntry = RPC1.DocEntry)) AS 'ADD Tax 1%',
                              (SELECT DISTINCT TaxRate
                            FROM          RPC4 AS RPC4_2
                            WHERE      (staType = 7) AND (DocEntry = RPC1.DocEntry)) AS 'Excempt'
FROM         OSTA INNER JOIN
                      RPC4 AS RPC4_1 ON OSTA.Code = RPC4_1.StaCode CROSS JOIN
                      ORPC INNER JOIN
                      RPC1 ON ORPC.DocEntry = RPC1.DocEntry
WHERE     (OSTA.Code IN ('BED@10','eCess 2%','HeCess 1%','CST')) AND (ORPC.CardCode = 'V00308') AND (ORPC.DocNum = '9220004')
Kindly help me to solve this problem
Regards
Rahul

Hi rahul,
Try this:
SELECT DISTINCT T0.DocNum AS 'Debit Note No.', T0.CardName AS 'Name', T0.CardCode AS 'code', T0.NumAtCard AS 'Supplier Ref.'
     ,T1.Dscription AS 'Description of Goods', T0.Address, T1.Quantity, T1.Price AS 'Rate', T1.LineTotal AS 'Amount', T0.DocDate,
     (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0)FROM RPC4 WHERE RPC4.StaType = -90 AND RPC4.DocEntry = T0.DocEntry) AS 'Basic Excise Duty BED@10 %',
     (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0) FROM RPC4 WHERE RPC4.StaType = -60 AND RPC4.DocEntry = T0.DocEntry) AS 'Education Cess @2%',
     (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0) FROM RPC4 WHERE RPC4.StaType = -55 AND RPC4.DocEntry = T0.DocEntry) AS 'Secondary Education Cess @1%',
     (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0) FROM RPC4 WHERE RPC4.StaType = 4 AND RPC4.StaCode = 'CST2' AND RPC4.DocEntry = T0.DocEntry) AS 'Central Sales Tax(CST)',
     (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0) FROM RPC4 WHERE RPC4.StaType = 1 AND RPC4.StaCode = 'VAT4'AND RPC4.DocEntry = T0.DocEntry) AS 'Input VAT@5%',
     (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0) FROM RPC4 WHERE RPC4.StaType = 1 AND RPC4.StaCode = 'VAT12.5'AND RPC4.DocEntry = T0.DocEntry) AS 'VAT12.5%',
     (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0) FROM RPC4 WHERE RPC4.StaType = 18 AND RPC4.StaCode = 'Add2'AND RPC4.DocEntry = T0.DocEntry) AS   'ADD Tax 1%',
     (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0) FROM RPC4 WHERE RPC4.StaType = 7 AND RPC4.DocEntry = T0.DocEntry) AS 'Excempt'
FROM ORPC T0
     INNER JOIN RPC1 T1 ON T0.DocEntry = T1.DocEntry
WHERE (T0.CardCode = 'V00308') AND (T0.DocNum = '9220004')
FOR BROWSE
Thanks,
Neetu

SSRS Report with mutli select values in parameters

Hi All,
I am creating a SSRS report and displaying the result in tablix. I want to make the report to filter by multi select values from the parameters.
I have 3 parameters. For all the three parameters, I have set "Default Values" and "Available Values". Also, modified my result dataset to get the values from parameters using "WHERE ID = @Parameter1" (example) and so
on..
3 Parameters types: 1. Yes or No
2. Date 3. Values with NULL in the DB
Problems:
1. When I am passing the default values "Yes" "No" - it is throwing errors because default values is passed as Yes "AND" No instead of "OR" condition. The value stored in the DB wil have either Yes or No but not both.
2. When I am querying the date values, it is a DateTime field in the DB. But I have queried like SELECT CONVERT(DATE, EXE_DATE) AS DATE FROM table which is giving only date in SQL but in SSRS displaying date with time.
3. When I pull the list of values for third Parameter from SQL, it has some NULL values. When I try to use it in SSRS, it is not displaying the NULL value as select option in the list of values
Any suggestions for the above three problems for SSRS with multi select values as filter will be helpful.
Maruthu | My Blog

Hi Maruthi,
Regarding the three things:
1.) I believe your first parameter is mutliselect , please convert it to single select.
Steps:
a.) Select the parameter, right click and go to parameter properties
b.) Under General Tab in DataType section remove the checkbox for Allow Multiple Value.
2.) Instead of returning as the date please return string. For example :
SELECT CONVERT(VARCHAR, GETDATE(),101)
Here is the list of conversion : http://www.sqlusa.com/bestpractices/datetimeconversion/
3.) As such there is no concept of null in SSRS. (Its a relational concept) . We do have nothing , which means empty. In Order to use null please select the Allow null option in the DataType section of the Parameter, This will add an checkbox for null in
the report preview. Its developer job to handle the null values in there query.
Regards Harsh

Automatically Selecting Values in Multiple Values Dropdown Parameters

Hi,
Is it possible to have parameter values automatically selected in a dropdown in an SSRS report? I'm using SQL Server 2008 R2 Enterprise edition. Basically what I have in mind is this: The user wants to save his parameter selections in a
table that will be available as a dropdown parameter of a report, call it
ParamUserSelection. ParamUserSelection is the first parameter of the report and other parameters depend on it.
We have two other parameters called ParamCountry and
ParamState. These are dropdown text parameters that allow multiple values to be selected. Populating the list is not a problem as I use a standard cascading parameter technique. What I'm trying to do is the following:
The user selects a value from ParamUserSelection, call it Selection1. Selection1 is stored in a table and has all the values that should be selected in ParamCountry and ParamState. In other words, it should tell these two subsequent parameters,
what values should be selected in their respective dropdowns. For example if the user selects Selection1 from ParamUserSelection, it reads the values in the database table and if it finds US and Canada for countries and CA, NY, ON for states, ParamCountry
should be populated with all the countries available in the database but should have ONLY US and Canada as selected values and ParamState should be populated with all the states in the database but should have ONLY CA, NY and ON as selected values.
If then I click on selection 2 and it has ParamCountry = US, ParamState = TX,OH in its database then again all countries and states should be in the dropdown but only US for ParamCountry and TX,OH for ParamState should be selected.
Is this possible with SSRS? I've tried using the Default Values tab with a dataset that returns all the selected values under Report Parameters Properties but this only works for the first time that I select ParamUserSelection. It appears that
if I change the value of ParamUserSelection again, the default values are not invoked.
If this is possible, please tell me how to do this as I have been struggling for a day with it.

Hi Comedian,
According to your description, you have a report with three parameters (ParamUserSelection, ParamCountry, ParamState). The available value lists of ParamCountry and ParamState are based on the selection of a value for ParamUserSelection. Now you want to
show all countries and states in their parameter dropdown list when selecting a user selection instead of only showing the cascading values. Right?
In Reporting Service, when we want a parameter to show the cascading values, we only need to set the corresponding dataset and field for Default Values in this parameter. In this scenario, if we want to show all countries and states in their dropdown list,
we just need to set another dataset for Available Values in those parameters so they can display all countries and states. We have tested your case in our local environment. Since you have done with the cascading parameters, we just give some part of steps
and screenshots for your reference:
We created two tables (dbo.Selection, dbo.states) based on your information.
Create one more dataset (named dataset2) in your report, put text below into your query:
select distinct Country from states
Create another dataset (named dataset3), put text below into your query:
select distinct State from states
Go to your ParamCountry, in Available Values, select dataset2 and Country for dataset and field.
Go to your ParamState, in Available Values, select dataset3 and State for dataset and field.
Save and preview. It looks like below:
Reference:
Report Parameters (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Getting selected value from Listbox

Hi,
I have populated my listbox on the selection screen using the function module VRM_SET_VALUES.
How do I get the value which is selected from the list box.
Where is the selected value in the listbox stored.
Thanks,
Abhishek

The code I used is:
Another issue is that whenever I select any value in the listbox it is not displayed on the screen. It becomes blank again.
PARAMETERS: p_prin AS LISTBOX VISIBLE LENGTH 30 USER-COMMAND sele.
DATA: i_printers TYPE STANDARD TABLE OF frprlist,
        wa_printers TYPE frprlist.
DATA: l_name TYPE         vrm_id,
        i_list TYPE         vrm_values,
        l_ctr   TYPE         i VALUE 0,
        wa_value LIKE LINE OF i_list.
CLEAR: wa_value.
Get printers
CALL FUNCTION 'RSPO_FRONTEND_PRINTERS_FOR_DEV'
    EXPORTING
      device         = p_print
    TABLES
      list           = i_printers
    EXCEPTIONS
      no_list        = 1
      list_truncated = 2
      name_not_found = 3
      OTHERS         = 4.
IF sy-subrc EQ 0.
Populate to drop down box
    l_name = c_prin.
    LOOP AT i_printers INTO wa_printers.
      l_ctr = l_ctr + 1.
      wa_value-key = l_ctr.
      wa_value-text = wa_printers-prname.
      APPEND wa_value TO i_list.
      CLEAR wa_value.
    ENDLOOP.
    CALL FUNCTION 'VRM_SET_VALUES'
      EXPORTING
        id              = l_name
        values          = i_list
      EXCEPTIONS
        id_illegal_name = 1
        OTHERS          = 2.
    IF sy-subrc NE 0.
Do nothing
    ENDIF.
ENDIF.
CLEAR: l_name, l_ctr, wa_value, i_list.

Reading selected values from af:selectManyListbox

Hi
got af:selectManyListbox in the page with the dept_id as the base attribute and dept_name as the display attribute.
Since its multi select i'm able to read the selected values using array as per the following code
            BindingContext bc1 = BindingContext.getCurrent();
            DCBindingContainer binding1 = (DCBindingContainer)bc1.getCurrentBindingsEntry();
                JUCtrlListBinding listBindings1 = (JUCtrlListBinding)binding1.get("DEPTVIEW1");
                Object str[] = listBindings1.getSelectedValues();
                System.out.println("after Object str[] = listBindings1.getSelectedValues();");
                for (int i = 0; i < str.length; i++) {
                    System.out.println(str[i]);
which is returning the dept_id s since its the base attribute
say
2
3
6
on basis of selection
I got to retrieve the DEPT_NAME too?
How to fetch the DEPT_NAME which is the display attribute??
Bindings has the DEPTVIEW1 in the variables. so i cant separately access the DEPT_NAME too from bindings.
Thanks
Chaya

Hey chaya,
I use a similar method of what you use, but i use it with selectionEvents but take a look at my code and see if it can help you:
        //get access to the master table to read selected row keys
        RichTable rt = (RichTable) selectionEvent.getSource();
        RowKeySet rks = rt.getSelectedRowKeys();
        while (selectedRowsIterator.hasNext()) {
            List rowKey = (List) selectedRowsIterator.next();
            //make the row current
            rt.setRowKey(rowKey);
            JUCtrlHierNodeBinding wrappedRow = (JUCtrlHierNodeBinding) rt.getRowData();
            Row rw = wrappedRow.getRow();
            long var_dimCoinInt = (Long) rw.getAttribute("PkCoin");
regards,
Frederico.

How to get the selected values from ADF select many shuttle to textfield

Hi All
Actually in my webpage, I am using text field and beside that placing the command button. When user clicks the command button, a popup window will open up with the "af:select many shuttle" component. While popup opens, it fetch the values backend and displays it to the user in left side of the component. When user selects few values to the right side of the component and clicks ok. Those selected values should be displayed in the besides inputtext field.
Code in Webpage:
<af:inputText id="disciplineVariable"
contentStyle="width:200px;"
styleClass="AFDefaultBoldFont;AFLabelTextForeground;AFDarkForeground;"
value="#{ADFStandards.input}"/>
<af:commandImageLink id="cb12" icon="/compliance/images/List.PNG" hoverIcon="/compliance/images/HoverList.PNG">
<af:clientListener type="action" method="disciplinePopupMethod"/>
</af:commandImageLink>
PopUp code:
<af:popup id="testingPopUP" contentDelivery="lazyUncached">
<af:dialog title="TestingPOPUP" dialogListener="#{testBean.testingValues}">
<af:selectManyShuttle id="sms1" valueChangeListener="#{testBean.testingPopUP}">
<f:selectItems value="#{ADFStandards.mostCommonStandards}" id="si1"/>
</af:selectManyShuttle>
</af:dialog>
</af:popup>
Could anyone please help me in this.
Regards
Venkat.S

Bind your value attribute for af:selectManyShuttle to the List property in ManagedBean. When the User finish the selection, in your MB set the attribute List in input string attribute (probably what you want is iterate over the list, and concatenate on the String). After that, you have to partialTriggers on the inputText component in order to refresh.
Regards,

Displaying selected values to be displayed in a Column

Similar Messages

Maybe you are looking for