Displaying Selection option values in header using alv-factory

Hi all,
I am using alv factory class 'CL_SALV_TABLE'.
I want to display selection-option values on my header.
I have creted grid using class 'CL_SALV_FORM_LAYOUT_GRID' and am displaying other values.
But am facing problem in displaying selection option values.
Any pointer on this will be GR8.
Thanks & Regards.
Yats.

Hi,
Use this sample code.
form top_of_the_list_main changing lv_grids type ref to cl_salv_table.
*Creating instances of the clases
data :     lv_grid   type ref to cl_salv_table,
             lv_header type ref to cl_salv_form_element,
             lv_layout type ref to cl_salv_form_layout_grid.
move lv_grids to lv_grid.
*Creating the layout object
create object lv_layout.
*Setting the Header Text
lv_layout->create_label(
                         row     = 1
                         column = 1
                         text    = text-008 ).
lv_header = lv_layout.
lv_grid->set_top_of_list( lv_header ).
endform.                    " TOP_OF_THE_LIST_MAIN
Loop it and keep changing the row and colom..Pass the selection option to the text field.
Regards
Ansair

Similar Messages

Filtering internal table using select-option values

Hi,
I got an internal table with select-option values. for eg. it_perno with the values I BT 000160 000170.
Now i got another second internal table which is have the person number. Now i need to filter this second internal table based on the values from the select option table. my question is
i can collect all the values from 160 to 170 in a separate table by looping over the select option table. and then based on the values filter the second internal table person number.
But what would be the case if the select option contains both intervals and multiple options. For eg.
I BT 000160 000170.
I EQ 000185.
So can you suggest any good solution, that based on this select option table i need to filter the second internal table Person number.
Thanks in advance.
Regards,
anbu.

Hi,
Can you not use the select-options in the Select query while populating the internal table.
SELECT pernr FROM pa0000 INTO it_tab WHERE pernr IN s_pernr.
If you cannot do this and you do not want to delete the unwanted entries, then you can use the WHERE clause in the LOOP statement to process the specific entries required:
LOOP AT it_tab INTO wa_tab WHERE pernr IN s_pernr.
Regards,
Aparna Alashe.

How to pass select option value to function module while using service call

Hi,
I have select-option in my WD application. To collect data based on user input im using service call. How to pass this select option values to my RFC.
rgds
sudhanshu

Hi,
Thank s for your reply. In fact im doing similar with following variation:
i) collected range values using get_range* method.
ii) separate low and high values as:
read table <field2> index 1 into wa_range.
vert2_low = wa_range-low.
vert2_high = wa_range-high.
(Please note that in RFC I have taken two importing parameter as s_vert_lo and s_vert_hi)
iii) Now setting these RFC attribute as:
lo_el_importing->set_attribute(
    EXPORTING
      name = `S_VERT_LO`
      value = vert2_low ).
and
lo_el_importing->set_attribute(
    EXPORTING
      name = `S_VERT_HI`
      value = vert2_high ).
iv) In RFC im having my query as :
select <fld list> from BUT000 into table itab where vertical in r_vert.
Here, r_vert is a range defined as:
ranges r_vert for <fld refrence>
r_vert-sign = 'I'.
r_vert-option = 'BT'.
r_vert-low = S_VERT_LO.
r_vert-high = S_VERT_HI.
append r_vert.
Issue here is with ranges. if im passing both low and high values it is fine but if only low value being passed it is not giving me any record.
Please suggest.
Rgds
Sudhanshu

Passing select-options values using call transaction method

Hi Experts,
I have a scenario in which i have three fields BUKRS,WERKS and MATKL in an internal table i_tab and I have MATNR as a selection-option.
After this I have to use call transaction <tcode> for all the line items in the internal table and the MATNR select-option values I have to pass directly for each line of i_tab using call transaction method.
TYPES: BEGIN OF t_tab,
          bukrs TYPE bukrs,
          werks TYPE werks_d,
          matkl TYPE matkl,
        END OF t_tab.
DATA: w_tab TYPE t_tab,
            i_tab      TYPE STANDARD TABLE OF t_tab.
SELECT-OPTIONS: s_matnr FOR marc-matnr.
Now I am putting a loop at i_tab and have to use CALL TRANSACTION <TCODE> for each line with the SELECT-OPTIONS for MATNR.
Please tell me whether we can pass multiple ranges for MATNR using call transcation method.
for example there can be multiple single values/multiple ranges/excluded ranges for MATNR. so please suggest me how tho achieve this sceanrio using CALL transaction method of BDC.
Thanks a lot.
Regards,
Krishan

Hi Krishan,
For the Call transaction TCODE there is extension ....OPTIONS from OPT. Just Check it out. I think it is possible like this.
... OPTIONS FROM opt
*Effect*
This addition gives you control using the values of the components of the structure opt, which must be of the Dictionary type CTU_PARAMS. The components have the following meaning:
DISMODE
Processing mode (comparable with the MODE addition)
UPDMODE
Update mode (comparable with the UPDATE addition)
CATTMODE
CATT mode (controlling a CATT procedure)
The CATT mode can have the following values:
' ' No CATT procedure active
'N' CATT procedure without single screen control
'A' CATT procedure with single screen control
DEFSIZE
Use standard window size
RACOMMIT
COMMIT WORK does not end CATT procedure
NOBINPT
No batch input mode, that s SY-BINPT = SPACE.
NOBIEND
No batch input mode after BDC data has been read
The components DEFSIZE , RACOMMIT, NOBINPT, NOBIEND always take the following values:
'X' Yes
' ' No
If the OPTIONS addition is omitted, the following settings are valid for the control parameters:
DISMODE from the MODE addition
UPDMODE
from the UPDATE addition
CATTMODE
No CATT procedure active
DEFSIZE
Do not use standard window size
RACOMMIT
COMMIT WORK ends procedure successfully
NOBINPT
Batch input mode, that is SY-BINPT =X.
NOBIEND
Batch input mode also active after BDC data has been read
Regards,
Swapna.

Select -options (fields as mandatory) and alv

Hi all,
i have 5 fields in select options and alv table , based on selection criteria values will display in alv table. now i want to make 2 fields as mandatory in select-options. without entering values in those two fields it should not allow the values to display iin alv table , it should rise a message..
(i have not created node for select-options ,i have directly used data type in wddoinit for select-options and for alv table i have created node)
thanks all

Hi,
In wddoinit while creating select options by ADD_SELECTION_FIELD method ,it has a parameter called I_OBLIGATORY. Set it as X and thus the field becomes mandatory.
Regards
Karthiheyan M

Adding select-option value in selection screen of FBL5N tcode.

Hi Experts,
I have one requirement that to add a Header Text Field(BKPF-BKTXT) in section screen of standard program RFITEMAR(tcode : FBL5N), i tried to add that field but it was not displayed where i required, i mentioned below where i required.
Customer account
Company code
i required under company code select option value in same selection screen block.
Please do the needful.
thanks in advance.
gsreddy.

Hi,
If you get the access key it is possible to edit the standard program,
How u tried to add the field???
regards,
Mullai

Display Select option in module pool screen

What are the Function modules used to display Select option type fields in a module pool screen?

hi,
You can use the SELECT-OPTIONS statement to place a group of fields on the screen that allows users
to enter complex selections. The selection may be a single value, or any form of interval
Selection ranges are stored in programs using an internal table.
The ABAP statement SELECT-OPTIONS <selname> FOR <field> declares an internal table called
<selname>, containing four fields - SIGN, OPTION, LOW, and HIGH. The fields LOW and HIGH have
the same type as the field <field>.
The SIGN field can take the value 'I' (for inclusive) or 'E' (for exclusive).
The OPTION field can contain relational operators (EQ, NE, LE, LT, GE, GT), pattern operators (CP,NP), and operators that allow you to enter intervals (BT, NB).
SELECTION-SCREEN BEGIN OF BLOCK conn WITH FRAME TITLE text-001.
PARAMETERS pa_car LIKE wa_sflight-carrid OBLIGATORY.
SELECT-OPTIONS: so_car FOR wa_sflight-carrid,
SELECTION-SCREEN END OF BLOCK conn.
Hope this helps, Do reward.

Select-option value is not getting captured in at selection-screen on value

In Selection screen , we have Select-option and a parameter.
Based on the values given in Select-option, the values of Parameter should get populate.
To achieve this functionality,
I used At selection u2013screen on value request for <parameter> EVENT and 'F4IF_INT_TABLE_VALUE_REQUEST' Function Module.
But the Select-option values are not getting captured in this event,unless u press Enter key.
Is there any other way to achieve this functionality.
Please Guide me.

When you call function 'F4IF_INT_TABLE_VALUE_REQUEST'. make sure you send it the name of the screen variable - the F4IF_INT_TABLE_VALUE_REQUEST function calls DYNP_VALUES_READ itself if you tell it the name of your report, screen number, and the variable name... snippet below.
Jonathan
data:
    l_repid             type syrepid.
l_repid = sy-repid.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      dynpprog         = l_repid
      dynpnr           = '1000'
      dynprofield      = 'S_FIELD-LOW' "Select options - low value
* etc

How can we pass the select-option value to modulepool program?

hi,
how can we pass the select-option value to modulepool program ?
Because if i declared select-options in executable program and i used SSCRFIELDS to define push buttons in selection screen.
           My requirement if enter the values to select-options and press UPDATE pussbotton then i want call screen which contains tablecontrol.
           How i get select-option values to PAI of call screen for getting the data from database table to my internal table?

Oh I thought that you have selection-screen and again you are working on dialog programming.
if you want to use select-option directly in module pool then it is not possible.
but you can do other way.
create two varaiables
data : v_kun_low like kna1-kunnr,
         v_kun_high like kna1-kunnr.
use these two variables in layout ,let user knows that he can not give options like gt,lt,eq ,it will be always BT.
and also when you see normal report program,you can use multiple values in either low or high,but here it is not possibel.
use can enter only low value and high value.
when you come to program point of view
declare one range
ranges r_kunnr for kna1-kunnr.
do the coding like
r_kunnr-low = v_kun_low.
r_kunnr-high = v_kun_high.
r_kunnr-options = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
now you can use r_kunnr in select query ,it will work like select-option.
other than this there is no option.
Thanks
Seshu

Passing SELECT-OPTIONS value to Function Module

Hi,
I need to pass select-options value to a function module.
Code is like the following:
SELECT-OPTIONS seltab FOR object-type.
CALL FUNCTION 'Z_MY_FM'
      EXPORTING
        sel_tab         = seltab
     IMPORTING
        result_tab     = it_result
I have found a similar problem in the SDN forum: How to pass select-options parameter to FM?
However, that could not help me much in solving my problem.
So far I have tried to created a structure in DDIC with the following components for the select-options:
SIGN - BAPISIGN
OPTION - BAPIOPTION
LOW - ZBWOBJECTTYPE (my type)
HIGH - ZBWOBJECTTYPE (my type)
and subsequently a table type for this structure which is specified in the "Import" tab of my function module.
Unfortunately, when I ran the program a runtime exception occured (CALL_FUNCTION_CONFLICT_TYPE).
Could anyone please help me on this issue?
Thanks in advance.
Regards,
Joon Meng

Hello Joon,
CALL FUNCTION 'Z_MY_FM'
      EXPORTING
        sel_tab         = seltab
     IMPORTING
        result_tab     = it_result
You have defined SELTAB as a SELECT-OPTION.
So when you pass only SELTAB, the header line is transferred to the FM. When you pass SELTAB[] the whole table(range) is passed.
It is similar to the concept of an internal table with header line.
Hope i am clear.
Anyways how have you defined result_tab and sel_tab ?
BR,
Suhas

How to assign select-option values to internal table

hi all,
how to assign select-option values to internal table
thanks in advance.

Hi,
You just need to loop at your select-option field and take the values from low and high fields.
for. e.g
loop at s_werks .
move:s_werks-low to <your itab>
if not s_werks-high is initial .
move: s_werks-high to <youritab>
endif .
append <your itab>
endloop .
OR use select statement.
regards,
Omkar.
Message was edited by:
Omkaram Yanamala
Message was edited by:
Omkaram Yanamala

Select-options value

Hi all.
I have defined a select-options with no intervals. I want to loop through all the values that are input in select-options. Can i use loop at or do i need to fetch the vaues in an itab first?
thanks,
HM

Hi,
Yes you can use it, below is the sample code :
tables : bsis.
data : count type i.
data : begin of itab occurs 0,
buzei like bsis-buzei,
end of itab.
select-OPTIONS : num for bsis-buzei.
start-of-SELECTION.
count = 1.
do num-high times.
if count = 1.
count = num-low.
move : count to itab-buzei.
append itab.
clear itab.
count = count + 1.
else.
move : count to itab-buzei.
append itab.
clear itab.
count = count + 1.
endif.
if count GT num-high.
exit.
ENDIF.
enddo.
Thanks,
Sriram Ponna.

Select options values pass to function module

Hi all,
I want to pass the values entered in the select options to the function module. How should my function module interface be declared for passing the select options
I tried declaring like
t_range type data in the tables tab. But this throws error.
Please let me know how to pass select option values back to function modules.
Thanks,

Hi,
Check this code.
data: node_flights type ref to if_wd_context_node.
data: rt_carrid type ref to data.
data: rt_connid type ref to data.
data: isflight type table of sflight.
data: wsflight type sflight.
field-symbols: <fs_carrid> type table,
<fs_connid> type table.
Retrieve the data from the select option
rt_carrid = wd_this->m_handler->get_range_table_of_sel_field(
i_id = 'S_CARR_ID' ).
if rs_carrid is not initial. Here you can check that if rs_carrid is no initial then assign value of field symbol
Assign it to a field symbol
assign rt_carrid->* to <fs_carrid>.
endif.
Retrieve the data from the select option
rt_connid = wd_this->m_handler->get_range_table_of_sel_field(
i_id = 'S_CONN_ID' ).
if rt_connid is not initial. Here you can check that if rt_connid is no initial then assign value of field symbol
Assign it to a field symbol
assign rt_connid->* to <fs_connid>.
endif.
if <fs_connid> is not initial and <fs_carrid> is not initial.
Retrieve that data from the database. Normally it is suggested to
encapsulate the data retrieval in a separate class.
For simplicity, the SELECT statement has been implemented here.
clear isflight. refresh isflight.
select * into corresponding fields of table isflight from sflight
where carrid in <fs_carrid>
and connid in <fs_connid>.
endif.
Bind the data to the context
node_flights = wd_context->get_child_node( name = `FLIGHTS` ).
node_flights->bind_elements( isflight ).
Hopes this will helps you.
Regard
Manoj Kumar
Edited by: Manoj Kumar on Mar 16, 2009 10:41 AM

Passing select-options value in method

How to pass select-options value in method ?
Example:
Select-options: carrid for spfli-carrid.
class cl_myclass implementation.
select carrid connid from
spfli where carrid in carrid.
endclass.
Thanks

Hello Anee
The coding of this functionality is quite simple:
REPORT zmy_report.
DATA: go_myclass   TYPE REF TO zcl_myclass,
           gd_repid         TYPE syst-repid.
PARAMETERS:
p_bukrs   ...
SELECT-OPTIONS:
o_kunnr ...
START-OF-SELECTION.
gd_repid = syst-repid.
CREATE OBJECT go_myclass
    EXPORTING
      id_calling_program = gd_repid.
And that's how your CONSTRUCTOR method should look like:
METHOD constructor. " IMPORTING parameter id_calling_program
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
    CURR_REPORT = id_calling_report
TABLES
    SELECTION_TABLE = me->mt_selopts.
" NOTE: define mt_selopts as instance attribute of table type RSPARAMS_TT
ENDMETHOD.
Finally you have to extract the parameter and select-options from MT_SELOPTS.
Regards
Uwe

Select-options values display

Hi experts,
I have three select-options in a selection-screen like
s_vbeln for vbak-vbeln,
I want to display the values entered in the select-options of the selection-screen on the report.
eg!..
If user enters the multiple values in the select-options, it should show all the multiple values .
If the user enter only the ranges ("From and To"), it should display only the ranges .

Hi,
Actualy all the select option behave as internal and stores the value entered in them. So here your select options s_vbeln is an internal tables.
To display the value Just use LOOP AT Write statement to print values.
REPORT z_sdn.
TABLES:
vbak.
SELECT-OPTIONS:
s_vbeln for vbak-vbeln,
loop at s_vbeln.
WRITE:
/ s_vbeln-low,
s_vbeln-high.
endloop.
By the way you are repeating the same question in the same community and you also heve more than 10 post unresolved. Both are against the rule of engagement. Moderator may lock the thread. So please avoid them.
Regards,
Anirban

Displaying Selection option values in header using alv-factory

Similar Messages

Maybe you are looking for