Displaying target value in certificate

Hi Experts,
Is there any way to display target values maintained in inspection plan on quality certificates.
in certificate profile the text elements are available. But no text element can be used to display target value.
Can we create a new text element which will display target value.?
Please provide your valuable suggestions.
S Dey

Hello Sarves,
Please have a look at the following links. They describe the process in much better clarity than I can offer
http://scn.sap.com/thread/3345795
Additional details start on page 17 in this document:
http://help.sap.com/printdocu/core/print46c/en/data/pdf/qmca/qmca.pdf
Regards,
John

Similar Messages

How can I display the value of the Target Currency variable in my query

We have a query which has a key figure set to prompt for a Target Currency at runtime. Because the user did not want the currency displayed in each cell they used the NODIM function to remove it. They do however want to display the Target Currency in a cell within the report. Using Report Designer, I've tried to set up a Text Box to display this value, however, it is not in the list when looking at Constants, Filters or Variables or trying to display it in a Text box. Has anyone found a way to be able to do this?

Hi and thanks for the reply. I should have stated that because this was a validated query, we'd like to do this without modifying the query and thus having to go through another lengthy validation process. That's why we did not go the route of adding Unit to the query but we may have to. Another thing we can do is use a text variable in the headers that displays the currency. That works but, again, it's a query change whereas finding it in Report Designer will not require a query modification.

Open Target Quantity and Open Target Value in Contract

Hi,
When we execute transaction 'ME3N', it displays the report which is having columns as 'Open Target Quantity' and 'Open Target Value'. I have the similar requirement to read this 'Open Target Quantity' and 'Open Target Value' of contract.
Is there any table which stores these values or is there any function module which gives the value of 'Open Target Quantity' and 'Open Target Value'.
Thanks,
Siddhi

Hi,
Thank you for the reply.
I tried to find that way too. But I was not able to get the table / field for 'Open Target Quantity' or 'Open Target Value'.
Now, I am looking for the logic to get the 'Open Target Quantity' and 'Open Target Value' in contract.
Can anybody please help me with getting this logic?
Thanks,
Siddhi

In which TCODE target quantity (ZMand target values fields ( vbap ) entered

hI,
in which tcode target quantity ( vbap-zmeng) and target value
(vbap-zwert) are entered while posting.
please let me know
thanks & regards,
Hari priya

Target Value and Target quantity refer to contracts. The contracts are created using the T.code: VA41
Change: VA42
Display: VA43.
In the Service & maintenance contract (WV) you will see Target Quantity Field (ZMENG)
In the Value Contract (WK1 and WK2) you will see Target Value Field (ZWERT)
Regards
AK

Need Help: Dynamically displaying parameter values for a procedure.

Problem Statement: Generic Code should display the parameter values dynamically by taking "package name" and "procedure name" as inputs and the values needs to be obtained from the parameters of the wrapper procedure.
Example:
a) Let us assume that there is an application package called customer.
create or replace package spec customer
as
begin
TYPE cust_in_rec_type IS RECORD
cust_id NUMBER,
,cust_name VARCHAR2(25) );
TYPE cust_role_rec_type IS RECORD
(cust_id NUMBER,
role_type VARCHAR2(20)
TYPE role_tbl_type IS TABLE OF cust_role_rec_type INDEX BY BINARY_INTEGER;
Procedure create_customer
p_code in varchar2
,p_cust_rec cust_in_rec_type
,p_cust_roles role_tbl_type
end;
b) Let us assume that we need to test the create customer procedure in the package.For that various test cases needs to be executed.
c) We have created a testing package as mentioned below.
create or replace package body customer_test
as
begin
-- signature of this wrapper is exactly same as create_customer procedure.
procedure create_customer_wrapper
p_code in varchar2
,p_cust_rec customer.cust_in_rec_type
,p_cust_roles customer.role_tbl_type
as
begin
//<<<<<---Need to display parameter values dynamically for each test case-->>>>>
Since the signature of this wrapper procedure is similar to actual app procedure, we can get all the parameter definition for this procedure using ALL_ARGUMENTS table as mentioned below.
//<<
select * from ALL_ARGUMENTS where package_name = CUSTOMER' and object_name = 'CREATE_CUSTOMER'
but the problem is there are other procedures exists inside customer package like update_customer, add_address so need to have generalized code that is independent of each procedure inside the package.
Is there any way to achieve this.
Any help is appreciated.
// >>>>
create_customer
p_code => p_code
,p_cust_rec => p_cust_rec
,p_cust_roles => p_cust_roles
end;
procedure testcase1
as
l_cust_rec customer.cust_in_rec_type ;
l_cust_roles customer.role_tbl_type;
begin
l_cust_rec.cust_id := 1;
l_cust_rec.cust_name := 'ABC';
l_cust_roles(1).cust_id := 1;
l_cust_roles(1).role_type := 'Role1';
create_customer_wrapper
p_code => 'code1'
,p_cust_rec => l_cust_rec
,p_cust_roles => l_cust_role
end;
procedure testcase2
as
l_cust_rec customer.cust_in_rec_type ;
l_cust_roles customer.role_tbl_type;
begin
l_cust_rec.cust_id := 2;
l_cust_rec.cust_name := 'DEF';
l_cust_roles(1).cust_id := 2;
l_cust_roles(1).role_type := 'Role2';
create_customer_wrapper
p_code => 'code2'
,p_cust_rec => l_cust_rec
,p_cust_roles => l_cust_role
end;
end;

Not possible to dynamically in a procedure, deal with the parameter values passed by a caller. There is no struct or interface that a procedure can use to ask the run-time to give it the value of the 1st or 2nd or n parameter.
There could perhaps be some undocumented/unsupported method - as debugging code (DBMS_DEBUG) is able to dynamically reference a variable (see Get_Value() function). But debugging requires a primary session (the debug session) and the target session (session being debugged).
So easy answer is no - the complex answer is.. well, complex as the basic functionality for this do exists in Oracle in its DBMS_DEBUG feature, but only from a special debug session.
The easiest way would be to generate the wrapper itself, dynamically. This allows your to generate code that displays the parameter values and add whatever other code needed into the wrapper. The following example demonstrates the basics of this approach:
SQL> -- // our application proc called FooProc
SQL> create or replace procedure FooProc( d date, n number, s varchar2 ) is
2 begin
3 -- // do some stuff
4 null;
5 end;
6 /
Procedure created.
SQL>
SQL> create or replace type TArgument is object(
2 name varchar2(30),
3 datatype varchar2(30)
4 );
5 /
Type created.
SQL>
SQL> create or replace type TArgumentList is table of TArgument;
2 /
Type created.
SQL>
SQL> -- // create a proc that creates wrappers dynamically
SQL> create or replace procedure GenerateWrapper( procName varchar2 ) is
2 procCode varchar2(32767);
3 argList TArgumentList;
4 begin
5 select
6 TArgument( argument_name, data_type )
7 bulk collect into
8 argList
9 from user_arguments
10 where object_name = upper(procName)
11 order by position;
12
13 procCode := 'create or replace procedure Test'||procName||'( ';
14 for i in 1..argList.Count
15 loop
16 procCode := procCode||argList(i).name||' '||argList(i).datatype;
17 if i < argList.Count then
18 procCode := procCode||', ';
19 end if;
20 end loop;
21
22 procCode := procCode||') as begin ';
23 procCode := procCode||'DBMS_OUTPUT.put_line( '''||procName||''' ); ';
24
25 for i in 1..argList.Count
26 loop
27 procCode := procCode||'DBMS_OUTPUT.put_line( '''||argList(i).name||'=''||'||argList(i).name||' ); ';
28 end loop;
29
30 -- // similarly, a call to the real proc can be added into the test wrapper
31 procCode := procCode||'end;';
32
33 execute immediate procCode;
34 end;
35 /
Procedure created.
SQL>
SQL> -- // generate a wrapper for a FooProc
SQL> exec GenerateWrapper( 'FooProc' );
PL/SQL procedure successfully completed.
SQL>
SQL> -- // call the FooProc wrapper
SQL> exec TestFooProc( sysdate, 100, 'Hello World' )
FooProc
D=2011-01-07 13:11:32
N=100
S=Hello World
PL/SQL procedure successfully completed.
SQL>

Selected model does not contain any target value prior

Hi ODM experts,
I have tried to apply the SVM alg in order to find anomalous records.The table source have rows like that:
uniq_rec ID NAME A1 A2 A3 A4 A5 data
577     2052956018     NAMEHDRCP8     2.27     0.4     85.46     0.01     14.54     24-JAN-13
578     1250914484     NAMEDJDRVP3     11.45     1.24     56.24     0.01     43.77     24-JAN-13
579     1968689283     NAMEDKEND12     0.000011     6.78     0.000029     0.01     0.091     24-JAN-13
580     2063389130     NAMEDNMXG14     0.000011     0.65     36.65     0.02     0.091     24-JAN-13
unq_rec is the pk, id is the id for the generic name and A1 .. A5 attributes ,data when collection occur etc
I'm trying to execute the following code:
drop table ALG_SET;
exec dbms_data_mining.drop_model('SVMODEL');
create table ALG_SET (setting_name varchar2(30), setting_value varchar2(4000));
insert into ALG_SET values ('ALGO_NAME','ALGO_SUPPORT_VECTOR_MACHINES');
insert into ALG_SET values ('PREP_AUTO','ON');
commit;
Begin
dbms_data_mining.create_model('SVMODEL', 'CLASSIFICATION', 'ODM_PAR_FIN_HIST', 'UNQ_CRT', null, 'ALG_SET');
end;
The results is the following error:ORA-40104: invalid training data for model build ( if I run the code) .If I run from graphical interface I have obtained this
error code " Selected model does not contain any target value prior"(using the similar model - SVM for anomaly detction plus the same source table )
Please advice what is missing or wrong and if possible how to bypass this issue.
Thanks in advance for support.
Best Regards,
Bogdan

Here is also a newer example of creating a SVM Anomaly model from ODM sample code (12.1 version but this applies to 11.2):
Rem
Rem $Header: rdbms/demo/dmsvodem.sql /main/6 2012/04/15 16:31:56 xbarr Exp $
Rem
Rem dmsvodem.sql
Rem
Rem Copyright (c) 2004, 2012, Oracle and/or its affiliates.
Rem All rights reserved.
Rem
Rem    NAME
Rem      dmsvodem.sql - Sample program for the DBMS_DATA_MINING package.
Rem
Rem    DESCRIPTION
Rem      This script creates an anomaly detection model
Rem      for data analysis and outlier identification using the
Rem      one-class SVM algorithm
Rem      and data in the SH (Sales History)schema in the RDBMS.
Rem
Rem    NOTES
Rem
Rem
Rem    MODIFIED   (MM/DD/YY)
Rem    amozes      01/23/12 - updates for 12c
Rem    xbarr       01/10/12 - add prediction_details demo
Rem    ramkrish    06/14/07 - remove commit after settings
Rem    ramkrish    10/25/07 - replace deprecated get_model calls with catalog
Rem                           queries
Rem    ktaylor     07/11/05 - minor edits to comments
Rem    jcjeon      01/18/05 - add column format
Rem    bmilenov    10/28/04 - bmilenov_oneclass_demo
Rem    bmilenov    10/25/04 - Remove dbms_output statements
Rem    bmilenov    10/22/04 - Comment revision
Rem    bmilenov    10/20/04 - Created
Rem
SET serveroutput ON
SET trimspool ON
SET pages 10000
SET echo ON
--                            SAMPLE PROBLEM
-- Given demographics about a set of customers that are known to have
-- an affinity card, 1) find the most atypical members of this group
-- (outlier identification), 2) discover the common demographic
-- characteristics of the most typical customers with affinity card,
-- and 3) compute how typical a given new/hypothetical customer is.
-- DATA
-- The data for this sample is composed from base tables in the SH schema
-- (See Sample Schema Documentation) and presented through a view:
-- mining_data_one_class_v
-- (See dmsh.sql for view definition).
--                            BUILD THE MODEL
-- Cleanup old model with the same name (if any)
BEGIN DBMS_DATA_MINING.DROP_MODEL('SVMO_SH_Clas_sample');
EXCEPTION WHEN OTHERS THEN NULL; END;
-- PREPARE DATA
-- Automatic data preparation is used.
-- SPECIFY SETTINGS
-- Cleanup old settings table (if any)
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE svmo_sh_sample_settings';
EXCEPTION WHEN OTHERS THEN
NULL;
END;
-- CREATE AND POPULATE A SETTINGS TABLE
set echo off
CREATE TABLE svmo_sh_sample_settings (
setting_name VARCHAR2(30),
setting_value VARCHAR2(4000));
set echo on
BEGIN
-- Populate settings table
-- SVM needs to be selected explicitly (default classifier: Naive Bayes)
-- Examples of other possible overrides are:
-- select a different rate of outliers in the data (default 0.1)
-- (dbms_data_mining.svms_outlier_rate, ,0.05);
-- select a kernel type (default kernel: selected by the algorithm)
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_linear);
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_gaussian);
-- turn off active learning (enabled by default)
-- (dbms_data_mining.svms_active_learning, dbms_data_mining.svms_al_disable);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.algo_name, dbms_data_mining.algo_support_vector_machines);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.prep_auto, dbms_data_mining.prep_auto_on);
END;
-- CREATE A MODEL
-- Build a new one-class SVM Model
-- Note the NULL sprecification for target column name
BEGIN
DBMS_DATA_MINING.CREATE_MODEL(
    model_name          => 'SVMO_SH_Clas_sample',
    mining_function     => dbms_data_mining.classification,
    data_table_name     => 'mining_data_one_class_v',
    case_id_column_name => 'cust_id',
    target_column_name => NULL,
    settings_table_name => 'svmo_sh_sample_settings');
END;
-- DISPLAY MODEL SETTINGS
column setting_name format a30
column setting_value format a30
SELECT setting_name, setting_value
FROM user_mining_model_settings
WHERE model_name = 'SVMO_SH_CLAS_SAMPLE'
ORDER BY setting_name;

Displaying the value of an variable on the stage

I have managed to display the values contained in string variables on stage, and I am happy with that, however when I wish to display the value of an int and convert it to a string as one is supposed to do the output to the stage just calls it [class int] and does not give its value. any suggestions?
My rogram contains a stage at frame 1 which displays a word. The user must input a word. Frame 30 then displays the word which was displayed and the word input by the user. That all works fine. But the value of the variable NumberRight, which has been assigned to that variable will only display as [class int] without showing its value. (even though I have converet it to a string using the .to string function you see below).
My code is as follows;
trace( "The number correct was" + NumberRight); //This works fine in the output window and shows the value of the variable as NumberRight [class int]1 (showing the value to be 1)
outputText.appendText("in/"+textAtIN); //this works fine displaying the word presented and word input by user as in/in
outputText.appendText( NumberRight.toString(     )); //here lies the problem as it just displays [class int] and nothing else.
Yes I have managed to overcome that problem it was some code on the first frame, please excuse, however, now, is there any way to remove the [class int] bit from the displays, I wish to have the results as a clear copy of the results so that they can be printed out, without [class int] all over the place?

Hi Ned thanks for that. Yes I had accidently created blank spaces in the String() argument. (wanted to check if there was a subsequent difference in display and forgot to return them to normal ...Sorted )
Your next suggestion has eliminated the [class int] but I get a value now of 0.
My code on the first frame for a correct response for example is;
function keyPressedIN(event:KeyboardEvent):void
          if (event.keyCode == 13)/*Normally,this will move straight on to the next frame-
          recording a correct response and all that that implies in terms of scores etc. But now I have re directed it to Frame 30 to check are the variables working properly*/
                    //insert code for correct responses vowels etc.
                    VowelI = VowelI+1;
                    NumberRight = NumberRight +1;
                    stage.focus = stage;
                    //There is no need to display the text box as this is a correct response.
                    pupilsResponseIN.visible = false;
                    mainText.visible = false;
                    gotoAndPlay(30);//at the moment this takes me to the display frame to check if all is ok
On the first frame when the user say hits the Return key my code assigns the value of +1 to the variable; eg
NumberRight=NumberRight+1;
and the value of +1 to the value of VowelI
VowelI=VowelI+1
At Frame 30 the code is as follows;
stop();
trace( "The number correct was"+ NumberRight);
outputText.appendText("in/"+textAtIN);
outputText.appendText( "\n");
outputText.appendText("Vowels Correct ="+(int(VowelI).toString()));
outputText.appendText( "\n");
outputText.appendText("TotalCorrect="+(int(NumberRight).toString()));
//outputText.appendText( VowelI.toString());
Now what I am getting is
in/in
Vowels Correct = O
Total Correct = O
Yet the trace (output box) records the Number correct as [class int]1
many years ago I wrote this same program in Authorware using similar code. I am trying to re write it in FlashCS5 using ActionScript 3 and It take days to solve small problems. I notice also that If for example the user of the program makes an error and I record the error as NumberRight =NumberRight -1 the program records it as Total Correct = NaN .
I gave up on this a few months back but I am trying again. I think there must be a better way to do this. Variables do not seem to add up or subtract for me at present. no doubt its me thats got it wrong.

Form displays NULL values

A page is using PL/SQL script to display data. There are 2 display variables. Instead of bringing initial set of data, it displays NULL values. It "fixes" itself after changing variable values from a drop down menu. Why is that and how to fix it?

If you plan on performing all of the work under the Click event, then you won't need to worry about assigning a Script scope to the variables, but if you are planning on using those variables outside of the Event, then David's answer is the way to go.
Another option is to use a hash table as it also works around the issue with variable scope in a UI Event.
#Define at beginning of script
$hashtable = @{}
$OKButton.Add_Click({$hashtable.SelectedTemplate=$Something})
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.
I don't want it to be an EEM Event, I just want to run it from the (tcl)# prompt.
So I guess I'm asking if you can use cli_exec and other commands in the "namespace import ::cisco::eem::*" in a normal non-EEM script - can I do that?
This is the error I get:
OTN.159(tcl)#source flash:TCL_SNMP_Remote_Read.tcl
invalid command name "::cisco::eem::event_register_none"             ^
% Invalid input detected at '^' marker.
What am I missing?
================= TCL_SNMP_Remote_Read.tcl ==============================
::cisco::eem::event_register_none
namespace import ::cisco::eem::*
namespace import ::cisco::lib::*
if [catch {cli_open} RESULT]
    { error $RESULT $errorInfo }
    else { array set cli1 $RESULT }
if [catch {cli_exec $cli1(fd) "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0" } RESULT]
       { error $RESULT $errorInfo }
       else { set SnmpSysDesc $RESULT }
if [catch {cli_close $cli1(fd) $cli1(tty_id)} RESULT] {
            error $RESULT $errorInfo
puts $SnmpSysDesc
=========================================================================
In the sho-run config I have:
event manager directory user policy "flash:/"
event manager session cli username "cisco"
Any help to get me started would be greatly appreciated!
Tim

If you don't want an EEM policy, then don't use any of the EEM constructs. Instead, all you need is this:
set output [exec "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0"]puts $output

Contract Version not created when WK Contract (target value) is changed.

Hi there,
Problem with the Version Management on a WK Contract.
When we change the contract targ. value on some of our contracts the new version is not created accordingly. This is only on some of our contracts
Version Mgmnt is correctly configured and the release strategy in place to be triggered when the target value changes. It does work correctly for some contracts.
We receive the following message when we change the targ. value:
"No new version created because a message has not yet been transferred"= Message 027
Can anyone help or advise?
Many thx.

We receive the message on some of the contracts.
Therefore it can't be due to the output

Contract target value

Dear guru.
I have a contract with release strategy.
I change target value and the release strategy is reset.
I have created a purchase order before change contract target value.
If i change the purchase order value the system check if this change exceed the contract target value(EKKO-KTWRT) . But this new value isnu2019t released !!
For me the system must check that the purchase order change exceed the total value at time of release(EKKO-RLWRT).
What do you think about this ?

Thanks ,
but why the system consider contract target value and don't consider contract total value at time of release ?

Contract Target Value to PO

Dear All,
I am having a Service PR with value 2,695,929.00 USD, also one contract with Target Value 7000000 SAR, but in the service specification of contract, value is 5.00 SAR.
Now I had created release order with ref to both PR and Contract, and PO had captured 5.00 SAR from contract service specification. But the buyer had changed the currency as well as value in PO to 2,695,929.00 USD which exeeds contract value. System message 06/042 and SE/347 is set to the status "E". Still for the above process system not showing Error "Target value of contract & exceeded by & &".
Please advice.
Regards

Hi,
As you are for target value set error message {appl 06 and Msg No 155 to "E"(error msg)} in following path:
SPRO->MM> Purchasing> Environment data>Define attibutes of system message-->system message
Regards,
Biju K

Displaying default value for a field in ALV table

Hai all,
 I am having an ALV table in which I want to display Requisition number by default using a value which i generated randomly and it is stored in a variable.
While displaying ALV table my req number field should display that value by default when ever user is inserting a row( all the coloumns n my alv are editable.
Is it possible??
Kindly give some suggestions.
Thanks in Advance,
Nalla.B

Hai Kris,
 I took help from ur link and i declared a global attribute request_number.
and i created an event handler ON_ALV_INSERT and did the follwing coding for giving default value wen ever am inserting new row.
FIELD-SYMBOLS: <wa_row> LIKE LINE OF r_param->t_inserted_rows.
DATA bill_details TYPE REF TO zdom_bill_detail.
LOOP AT r_param->t_inserted_rows ASSIGNING <wa_row>.
 bill_details ?= <wa_row>-r_value.
 IF bill_details->REQ_NUMBER IS INITIAL.
DATA lo_nd_bill_detail TYPE REF TO if_wd_context_node.
DATA lo_el_bill_detail TYPE REF TO if_wd_context_element.
DATA ls_bill_detail TYPE wd_this->Element_bill_detail.
navigate from <CONTEXT> to <BILL_DETAIL> via lead selection
lo_nd_bill_detail = wd_context->get_child_node( name = wd_this->wdctx_bill_detail ).
lo_el_bill_detail = lo_nd_bill_detail->get_element( index = <wa_row>-index ).
 lo_el_bill_detail->set_attribute(
 EXPORTING
 name = 'REQ_NUMBER'
 value = wd_comp_controller->request_number
Wen am setting the value of wd_comp_controller->request_number to my context attribute am getting NULL object ref error.
lo_el_bill_detail->set_attribute(
 name = `REQ_NUMBER`
 value = wd_comp_controller->request_number ).
Pls give some suggestions,
Thanks in Advance,
Nalla.B

How to display the values stored in the database in the combobox on load?

I am develping one application where in
I wanted to display the values in the combobox which I am taking from the database and in the same form passing that value in same form after selecting it,My program is running fine for the first time but next time it is giving me NullPointerException.
So can anyone tell me please how I should develop the this application to avoid this exception?
Thank You
Praddy

Thanx a lot for showing interest in answering my query.I am pasting my code for ur reference.Please try to reply ASAP.
Thank You,
Praddy.
CODE:
======
<html>
<head>
 <script language="javascript">
 function submitthisform(thisForm)
 thisForm.submit();
 </script>
</head>
<body>
<form method=post name=samepgm>
Select City: <select name=city onChange='submitthisform(samepgm)'> 
<option value=''></option>
<option value='All'>All</option>
<%@ page language="java" import="java.sql.*" %>
<%
 String scity = request.getParameter("city");
 System.out.println(scity);
 Connection con = null;
 Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
 con = DriverManager.getConnection("jdbc:odbc:property","","");
 Statement st = con.createStatement();
 ResultSet rs1 = st.executeQuery("select distinct hcity from housefinance");
 while(rs1.next())
 //String ohname = rs1.getString("hname");
 String ocity = rs1.getString("hcity");
 //out.println(ohname +" ");
 out.println(ocity +" ");
%>
 <option value='<%=ocity%>'><%=ocity%></option> 
<% }
 rs1.close();
 if(scity.equals("All"))
 ResultSet rs2 = st.executeQuery("select * from housefinance");
 while(rs2.next())
 String ohname = rs2.getString("hname");
 String ohadd1 = rs2.getString("hadd1");
 //String ohadd2 = rs2.getString("hadd2");
 String ohcity = rs2.getString("hcity");
 String ohpcode = rs2.getString("hpcode");
 String ohtelno = rs2.getString("htelno");
 String ohfaxno = rs2.getString("hfaxno");
 String ohemail = rs2.getString("hemail");
 String ohmobile = rs2.getString("hmobile");
%>
<pre>
<tr>
<td>Company : <%=ohname%> </td>
<td>Address : <%=ohadd1%></td>
<td>City : <%=ohcity%> </td>
<td>Pin : <%=ohpcode%></td>
<td>Telphone : <%=ohtelno%></td>
<td>Fax No: : <%=ohfaxno%></td>
<td>Email : <%=ohemail%></td>
<td>Mobile No. : <%=ohmobile%></td>
</tr>
</pre>
<%
 else
ResultSet rs = st.executeQuery("select * from housefinance where hcity like '%"+scity+"%'");
 while(rs.next())
 String ohname = rs.getString("hname");
 String ohadd1 = rs.getString("hadd1");
 //String ohadd2 = rs.getString("hadd2");
 String ohcity = rs.getString("hcity");
 String ohpcode = rs.getString("hpcode");
 String ohtelno = rs.getString("htelno");
 String ohfaxno = rs.getString("hfaxno");
 String ohemail = rs.getString("hemail");
 String ohmobile = rs.getString("hmobile");
%>
<tr>
<td>Company : <%=ohname%> </td>
<td>Address : <%=ohadd1%></td>
<td>City : <%=ohcity%> </td>
<td>Pin : <%=ohpcode%></td>
<td>Telphone : <%=ohtelno%></td>
<td>Fax No: : <%=ohfaxno%></td>
<td>Email : <%=ohemail%></td>
<td>Mobile No. : <%=ohmobile%></td>
</tr>
<hr>
<% }
%>
</select>
</form>
</body>
</html>

How to display the values in JSpinner in format day:HH:mm

Hi All,
I want to know how can I display the values inside a JSpinner in the format day:HH:mm. Here the value of 'day' can be anything say from 0 to 365 and HH stand for hour and mm stands for minutes.
I tried to implement it using
mSpinner.setEditor(new JSpinner.DateEditor(mSpinner, "DD:HH:mm"));
but here the values of day was not proper. Please let me know if there is any standard format or how can I configure my own editor.
Thanks,
Rohit.

Hi,
It worked well for 112 as 112 comes under April month.. i.e. it will work properly for the range 91 to 120 as the current month is April and if we start counting from january 01 then for April month , the number of day will fall under range 91 to 120.
See, it will allow you to change the values beyond the limit (i.e. less than 91 or more than 120) but the real problem is that I used this spinner in the table and when I will try to save the value of spinner , then if the value of day in beyond the limit 91 to 120 then it will automatically changing in the range between 91 to 120.
I tried to use format DD:HH:mm ...... do I need to use any other format..
Hi All,
I want to know how can I display the values inside
de a JSpinner in the format day:HH:mm. Here thevalue
of 'day' can be anything say from 0 to 365 and HH
stand for hour and mm stands for minutes.
I tried to implement it using
mSpinner.setEditor(newJSpinner.DateEditor(mSpinner,
, "DD:HH:mm"));
but here the values of day was not proper. Define "not proper". I just tried it and it displayed
day 112 for today which seems correct.

Displaying target value in certificate

Similar Messages

Maybe you are looking for