In which TCODE target quantity (ZMand target values fields ( vbap ) entered

hI,
in which tcode target quantity ( vbap-zmeng) and target value
(vbap-zwert)  are entered while posting.
please let me know
thanks & regards,
Hari priya

Target Value and Target quantity refer to contracts. The contracts are created using the T.code: VA41
Change: VA42
Display: VA43.
In the Service & maintenance contract (WV) you will see Target Quantity Field (ZMENG)
In the Value Contract (WK1 and WK2) you will see Target Value Field (ZWERT)
Regards
AK

Similar Messages

  • Using enhancement COPA0001 in a derivation to clear value fields

    Dear colleagues,
    In our sales process, freight is added as an item of the sales order, which means we maintain different freight types as materials (mat type ZFRE - "Freight") and we create cost estimates, so that this cost can be valuated into COPA.
    Our problem is that we do not want to capture the cost of goods sold and the cost of sales for those materialss, as they only represent the freight cost that is paid by us and reimbursed by our customers. In addition, I we would like to move the value of the revenue value field to another value field (Freight sales).
    I am trying to accomplish this by using enhancement COPA0001 - I created an enhancement step and I added a code to include ZXKKEU11 which specifies the "clear" of 2 value fields and the "move" of the revenue to another value field.
    I had done this in the past to clear quantity fields, but I am testing this new config and it doesn't work.
    When testing the derivation analyzer tells me that "Derivation was not carried out. Reason: None of the target fields are to be derived".
    I looked in the known resources, but couldn't find any valuable information about such an issue. I did see in the SAP library that target fields can be "All quantity unit fields" , but value fields are not mentioned.
    Did anyone have a similar experience or knows if what I'm trying to do is possible?
    Thanks,
    Yoel.

    Hi
    You can try with exit COPA0005 as Christian mentioned...
    But, I would like to know your process in ddetail to see if any standard mechanism is possible...
    1. What does your sale order look like? Does it has one saleable material + Multiple freight materials?
    2. What purpose these freight materials serve? Do they have a revenue as well as cost in the sale order pricing procedure?
    3. Can you explain your total scenario with accounting entries? and what exactly are you looking at
    Regards
    Ajay M

  • How to Change the Value Field Type of a Value Field

    Hi,
    How can I change the value field type from Currency to Quantity of a value field? I have tried to do it in KEA6. I can change the value field and its description, but not the value field type from currency to qty. If I change this config, is there any other changes that I need to make so there is no side issue of this change?

    Hi Prem,
    Once you created value field as quantity or currency, you can not change this nature of value field. Based on this, system creates lots of data and tables. For this reason system will not allow any changes in quantity or currency.
    Alternative way is to remove the old value field and  create a new value field assign to operating concern and put all your seetings.
    Please let me know if you require any clarifications.
    Thank you,
    Regards,
    Santosh
    Reward points if helpful.

  • COPA value field not getting complete SD condition value

    Hi Gurus,
    I find a strange issue when a billing document is transferred to COPA (well basically, after a billing document is released to accounting, all the controlling docs and COPA docs are generated). The issue is, I have a SD pricing condition which has been assigned to COPA value field. I also have the transfer +/- sign checked on this value field. Now consider the following 2 scenarios:
    Scenario 1: In VKOA, two different G/l accounts have been assigned to the corresponding pricing condition account key. These 2 G/L accounts have been defined as cost elements with category '12' (its related to sales deduct). and fall under the same cost element group. When a billing doc is posted to accounting and hence to COPA, I see that there is no value in the value field and the corresponding condition type. Then I ran a simulation using KE4ST and found that I have two lines with the same pricing condition type and value field but one carries a positive value and the other one carries a negative value. Then I came to a conclusion that may be these two lines are netting out and hence there is no value being posted on the value field.
    Scenario 2: In VKOA, I have assigned two different G/L accounts which fall under different cost element group and one is defined as category 12 and the other as category 1. This time I see that only 1 line of value field is brought into COPA corresponding to the pricing condition and hence I see a value in COPA value field. But business doesn't want to go with scenario 2 as they don't want to use two cost elements in different cost element group. Also one is sales deduct and the other is primary cost/ cost reducing revenue. So there is a balance getting accumulated in the primary cost/cost reducing revenue element.
    How do I resolve this issue to post a value to the COPA value field using scenario 1?  I have also tried to uncheck the transfer +/- sign but I am unable to even release a billing doc to accounting as it is giving me a error message,: "correct the value field assignment for the condition type".
    Please help me !!
    Regards,
    Sony

    Version of SAP?

  • Change the Condition type to Value Field Assignment in KE4I

    Hi All,
    I have a requirement where a condition type which has been assigned to a Value Field needs to be changed/re-assigned to a different value field.
    There are already some postings into the current value field.
    How can I handle these postings once I change the assignment in KE4I.
    Please help me.
    Thanks in advance,
    erp.warrior.

    Hi
    Once you change in KE4I - It would impact only the subsequent postings... Historical postings wont be impacted...
    If you want to impact them as well - Follow one of these 2 approaches
    a. Then reverse the billing documents which have posted to this Value Field.... Change KE4I and post them again...
    b. Do a KE21N upload i.e. a -ve amount on the Old value field and a +ve amount on the new value field
    Regards
    Ajay M

  • Open Target Quantity and Open Target Value in Contract

    Hi,
    When we execute transaction 'ME3N', it displays the report which is having columns as 'Open Target Quantity' and 'Open Target Value'. I have the similar requirement to read this 'Open Target Quantity' and 'Open Target Value'  of contract.
    Is there any table which stores these values or is there any function module which gives the value of 'Open Target Quantity' and 'Open Target Value'.
    Thanks,
    Siddhi

    Hi,
    Thank you for the reply.
    I tried to find that way too. But I was not able to get the table / field for 'Open Target Quantity' or 'Open Target Value'.
    Now, I am looking for the logic to get the 'Open Target Quantity' and 'Open Target Value' in contract.
    Can anybody please help me with getting this logic?
    Thanks,
    Siddhi

  • Which CRM table stores the release quantity and target quantity

    I found one table named CRMD_SCHEDLIN, one field is Quantity, is it the target quantity or not? If not, which CRM tables stores this info?
    Thanks!

    H Tracy,
    As far as i could find the table CRMD_SCHEDLIN is the only table which stores quantity. the sum quantities of each line item gives you the target quantity of the order i think.
    Please check the source code of function module CRM_SCHEDLIN_I_GET_ORD_QTY_OW you may get soem idea.
    Thanks,
    Rajini A.

  • Target quantity in Sales Order Overview.

    12.11.07
    Hi friends,
    How do i get the Target quantity (VBAP-ZMENG) field in the order overview screen. My need is to enter the target quantity instead of the order quantity. Please advise.
    Regards,
    Udaynath.

    Hi ,
    Please goto Tcode SHD0  in that enter the Transaction code Va01 and Name of Transaction Variant BUS2032_4480  . Please check the fied u require i.e vbap-zmeng and make that field visible and reuired by checking the check box in the same row.
    If in ur case Transaction variant is different than BUS2032_4480 . Please press F4 on the field and try to get the correct one which is there .
    This will work .

  • Quotation with target value (field ZWERT)

    Hello
    the requirement is to create a sd quotation, which is not based on target qty or order qty!! furthermore I need to have a sd quotation which is based on target value. Is there any way to have this? I tried all the standard quotation types (AG, AV, AS, ...)! All of them are qty based not value based! What can I change in customizing to have it value based? could it be solved by change the field "Screen sequence grp." from AG to WK1 without change any logic for standard quotation reports??
    please help...
    thx
    deniz

    For me, it does not make sense.  Just from practical approach point of view, a seller would decide his selling price to his end customer based on what off-take they are going to lift.  Having said this, to decide the final selling price, you need to know what quantity you are going to sell.  You cannot fix the selling price for who orders 10 nos. and sell at the same price for those who orders 1000 nos.
    G. Lakshmipathi

  • Order Quantity and Target Quantity, both as editable in Sales Order

    Hi All,
    We have a requirement in which order quantity and target quantity, both should be allowed as editable fields in overview screen while creating a sales order or contract. Currently, only one quantity field is editable (order quantity in sales order and target quantity in contract).
    First question, is this possible?
    Second, If possible, then please tell the configurations need to maintain?
    Note: The material is relevant for delivery (so schedule lines allowed).
    Thanks & Regards,
    Vishal

    Hi Lakshmi,
    Thanks for the reply. I think I did not clarify the actual requirements. Let me explain it again:
    I understand that generally, Target qty is in contract and Order Qty is in sales order. But actually, here query is,
    When I create Sales Order (VA01), then while entering Material, user should see both quantity columns (Order Qty and Target Qty) in editable mode.
    So is this possible? If yes, then please guide.
    Please revert back if any further clarifications is required.
    Thanks & Regards,
    Vishal

  • Adding field GAMNG ( Target Quantity )in the Data Source 2LIS_04_P_ARBPL

    We are adding field GAMNG ( Target Quantity ) in the Data Source 2LIS_04_P_ARBPL ( Work Center View from PP/PP-PI )
    The field GAMNG is available in the communication structure maintainace.
    The problem is- We are not able to drag & drap field GAMNG from the Communication structure LBWE. Getting the error - End phase  002 ***********************************************************
    Message no. D0322 ..
    We deleted Setup table , Meins field already exist in comm str.
    1. How we able to drag the field from the communication structure as getting the above error. We searched SDN & try to follow that method but not working.
    2. We can add the field in SE11 - Structure -Manually, then we have to write ABAP code.
    Kindly suggest correct answer.
    Edited by: sk kamaruzzaman on Dec 20, 2011 2:08 PM

    Hi,
    There could be a number of reasons why you are getting the error:
    1. Fields are not assigned to datatypes.
        - Check structure in SE11 and assign to datatypes.
    2. There are inactive appends in the extract structure.
        - Double-click one of the includes. You will get a new screen with the INCLUDE structure. Click the button append-structure. Check if the append is inactive.
    3. The appended structure is in a different development class from the one of the structure it is being appended to.
    Please review and apply the following notes carefully :
      766603  Activation problems with extract structures
      623411  LBWE: Gener. terminates with D0 322 (end phase 002)
      757923  LBWE: Generation terminates with D0 322 (end phase
      600708  D0 322: End phase 002
    It is not possible to enhance the datasource 2lis_04_MATNR with the field GAMNG (so its possible that its the same for 2LIS_04_P_ARBPL) because GAMNG has the reference field AMEIN, which has a STATE F (forbidden) in table TMCEXCFS .
    Check to see if this is the same on your system.
    Rgds,
    Colum

  • How to restrict the delivery quantity not more than target quantity?

    Dear Gurus,
    How to restrict the delivery quantity not more than target quantity in a scheduling agreement? I think there are 2 methods.
    1. I found that setting 0 in Overdelivery Tolerance Limit in Info Record is not effective. Why?
    2. I want to set E for the message but can't find the place. The message is generated when entering and saving quantity as delivery quantity that is larger than target quantity. How can I set E to a message (067, as I remember)
    Any other effective method? Please advice. Thanks.
    Regards,
    David

    Dear all,
    It is not OK after checking everywhere you mentioned. I tested in 2 clients. In the development enviroment client, it works whatever E or W. In test enviroment, it does not work (meassge is W).
    I think there must be somewhere besides of those you menetioned.
    I notes that SAP help for the overdelivery tollerance setting of scheduling agreement: 
    Overdelivery Tolerance Limit
    Percentage (based on the order quantity) up to which an overdelivery of this item will be accepted.
    Dependencies
    If you have set the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed), this takes priority. It makes no sense to define a tolerance limit for overdelivery in such case.
    Where can I see: 'the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed)'? I want to check it.
    Pls help! Thanks.
    Regards,
    David

  • Copy of target quantity from Contract to Sales Order

    Hi all,
    The desired document flow is Quotation --> Contract --> Order.
    Thru copy control the target quantity from quotation flows in to the contract, but the target quantity is not copied into the sales order from the contract.
    The document type with the item category for the document types are as follows :
    Quot. Doc type ZQT (Copy of AV)    and item category AVN (Standard item)
    Contr Doc type EWK2 (Copy of WK2) and item category WVN (Maint contr item)
    Order Doc type ZSD (Service Order)    and item cateogry WVN(Maint Contr item).
    Please suggest a solution.
    Regards,
    Udaynath.

    dear udaynath
    check copy control settings
    Copy Control is used ,
    Copy control is basically used to transfer information from one document to another. In other words it helps in connecting and sharing information between two documents in a cycle like from example between quotation and a sales order. The following controls available at copy control configuration -
    You can store copying requirements at every level in copying control. Copying requirements contain the specific requirements for each business process and can be stored at every level. The reference document can only be created if all these requirements have been met.
    Examples of copying requirements that have been included in SAP standard system are –
    a. Header level – copying requirement 001 checks, for instance, whether the sold to party in the source and the target document are the same
    b. Item level – copying requirement 301 checks, for instance, whether the item that is to be used as a copy has a reason for rejection or completed status.
    c. Schedule line level – copying requirements 501 ensures that only schedule lines with an open quantity greater than zero are copied.
    To control the copying procedure, at each level you create:
    a. Data transfer routines – these routines control how fields are copied from the preceding document.
    b. Copying requirements – you define requirements that are checked when you create a document with reference. If these requirements are not met in any particular case, the system issues a warning or error message and if necessary terminates processing.
    c. Switches – there are switches for setting specific controls for each transaction. for example, you can activate or deactivate the transfer of item numbers from the preceding document at the header level for sales documents..
    possible scenarios:
    1- sales document - sales doc' VTAA
    eg: inquiry - quotation
    inquiry - order
    quotation - order
    quantity contract - order
    2- sales doc - delivery doc - VTLA
    eg: sales order - deliver ( OR- LF)
    returns order - return delivery
    3- sales doc - billing doc - VTFA
    eg;Cash sales - cash sales billing
    credit memo req - credit memo
    4- delivery - billing - VTLF
    eg: standard del - invoice ( LF- F2)
    5-billing - sales VTAF
    eg: standard invoice - credit memo req
    Invoice - Invoice correction req
    6- Billing - Billing VTFF
    eg: Invoice - credit memo
    flow will be done , only if their copying requirement condition meets
    like header sold to party is same.
    it has data transfer routines DataT-in which it has routines by which system transfers what data has to be copied.
    Update document flow-- this has to be mark if we want the system record the previous document numbers in track.
    rewards if it helps
    siva

  • How to control Order/Target Quantity with reference to Contract Quantity

    Hello GURUs,
    In my current organization, there is one scenario in which i have to control target quantity in sales contract e.g., i have created sales contract of 100 MT (contract no : 123), and with reference to that contract i have created another contract for say 100 MT (contract no : 456), after that i have changed quantity (of contract no 456) to 150 from original quantity 100. In this case system allows to do so, which is not correct, and i want same to be control based original contract quantity.
    Is there any solution in standard system to control the same? If there is any then pleas let me know.
    Thanks,
    Pratik

    Hello,
    Let me clarify your requirement:
    You have created Contract no. 456 (100 MT) with reference to another Contract No. 123 (100 MT).
    Now you want that system should not allow to change quantity in Contract no. 456 & keep it as it is (100 MT) in Original Contract No. 123.
    Now, if the above requirment is from Sales Order created with reference to Contract then it can be easily don thru Item Category Controls.
    But as the second COntract (456) is entirely a new Contract with it own contral parameters (validity dates, etc) system will allow you to change Quantity & other feilds).
    You requirment is not standard & will have be achieved thru applying a User Exit. Speak to your ABAPer & he would do the needful .
    Hope this helps,
    Thanks,
    Jignesh Mehta

  • Problem when changing the target quantity for a contract

    Hello,
    I have a problem when i try to change the target quantity for a contract through the BAPI 'BAPI_CONTRACT_CHANGE'.
    I filled the tables 'item' and 'itemx' with new values. the BAPI 'BAPI_CONTRACT_CHANGE' returns no error, but after using the BAPI 'BAPI_TRANSACTION_COMMIT' I get an info message from SAP and the modification does not pass.
    In debugger I could locate the error. In fact, the appeal of FM 'ME_UPDATE_DOCUMENT is done with a table XEKKN with the new values of the quantity and a KZ code equal to ' I ' to insert, then it must have the value ' U 'for update .
    Is someone can help me to solve this problem?
    Thank you in advance.

    Have you tried selecting the page, and then changing the theme directly on that page?

Maybe you are looking for