Displaying the Images on the Adobeform

Hi,
I want to display the image on Adobe form using URL option.  I have the URL obtained from the function module
'ALINK_RFC_DOCUMENT_URLS_GET' (dynamic).  The URL will be varied for different orders.
Can you please provide me some example to full fill the above requirement.
Thanks in Advance.

Hi,
in adobe livecycle you can use two types of image containers( "Image" and "image Field"). The first one does not have a binding field, you just input an static url, the second one have a binding but its usualy binary data, not an url.
Do you want to
     pass the url and let the runtime get the logo from that url (this involve dynamicly changing the url using javascript and the adobe has to be able to acess the url).
     or get the binary from url using abap, and pass the binary for the adobe to just show it?
I never tried the first option but i guess its feasible
Regards
Miguel

Similar Messages

  • Error message "This program cannot display the webpage when uploading images to Cafe Press

    I have had a Café Press shop for five years and except for sometimes being slow, no problems uploading images. Now, suddenly for 3 days I get the message "This program cannot display the webpage
    Most likely causes:
    • You are not connected to the Internet.
    • The website is encountering problems.
    • There might be a typing error in the address.
    What you can try:
    Check your Internet connection. Try visiting another website to make sure you are connected.
    Retype the address."
    I got the messsage about half way through the uploading of an image. People suggested using "firefox" instead of IE so I now get a similar error message from Firefox. I signed in, clicked on the image I wanted to upload and hit "upload" and get message as follows:
    Server not found
    Firefox can't find the server at members.cafepress.com.
    * Check the address for typing errors such as
    ww.example.com instead of
    [url=http://www.example.com]www.example.com[/url]
    * If you are unable to load any pages, check your computer's network connection.
    * If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
    None of this makes sense because I WAS connected to the internet (obviously) or I wouldn't have been able to sign in, go to my media basket, browse for the image and click "upload" and watch as the progress bar showed percentage of upload such as 20%, etc. and even went to 100% at times before giving me the error message. Plus I couldn't make a typing error since I wasn't typing anything but uploading an image. Any suggestions?
    Whatever your suggestion, I need step by step instructions as I am totally computer illiterate. I don't even know what a "proxy" is and don't know if I have a "firewall" as the message suggests. I have "Comodo" security and am using Windows XP.
    I contacted CP which was no help at all. All they did was tell me to clear my cache which I do after every session. Thanks
    Nancy
    http://www.cafepress.com/calendarflr

    Sounds like your desktop application is in fact running from
    a server. CHMs were identified as a security risk by Microsoft and
    are best suited to the user's PC.
    Click
    here for more information.

  • How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone?  Using Elements 13 with Windows 8.1

    How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone?  Using Elements 13 with Windows 8.1
    A senior citizen needs some help.
    Thanks

    Saving each image as different size - is it an option for you?  I would save images with their name as: 20x30.png, 16x20.png etc etc.
    Or explain whether you want these in a webpage  in which case only one image is necessary and different sizes are displayed with good CSS code.  this is question for Dreamweaver forum if this is what you want.

  • I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the

    I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%)   If I move the application window to another screen it adjusts it correctly  – leaving all the pallettes, menus and tools correctly sized as they are on the retina display   Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see?   There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light.  MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014

    I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
    If "open in low resolution" is unckecked the appearance is good but the very small size.
    See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt.

  • How to display an image on the HTML page by using applet

    Dear friends,
    I am now writing an java applet, I want to display an image on the HTML page, and tried the following commands:
    {color:#ff00ff}{color:#000000}Image map; //put in the class definition
    map=getImage(getCodeBase(),"hhh.gif"); //put in the function of init()
    g.drawImage(map,0,300,this); //put in the function of paint(){color}
    {color}
    However, when I run it, the image wasn't displayed at all.
    I hope who guys ever come across this problem could help me to solve it. Thank you in advance!
    Hawaii

    Hi,
    I am no expert on Images
    but
    from personal exp.
    are you sure that map actually contains the image?
    try using
    ImageIcon ii = ImageIcon(String name);
    map = ii.getImage();I saw a tutorial on images i think on sun
    where they use ImageIcon to load the image

  • How to display the archive link image in third party tool TSLImage viewer.

    Currently in our workflow scenario we are displaying the archivelink image in objects & Attachment, using SAP document viewer.  But the new requirement is, the attachment in workitem should be displayed using a thrid pary tool, EASY TSL IMAGE VIEWER. I have maintained the ARCHIVELINK Basic setting(OAG1),  Call Internet Browser. 
    The viewing of the document MUST use the TSLImageViewer web application which is hosted on rte-ben-ez2 for the test system u2013 NOT the SAP web document viewer. I think there must be an option in SAP Workflow that specifies that the standard OLE viewing is used for the work item attachments rather than the EDM viewing that I am getting.
    The authorising of the document MUST use the TSLImageAuth web application which is also hosted on rte-ben-ez2 for the test
    system. The url that are putting into the email needs to have this format:
                    http://rte-ben-ez2/TSLImageAuth?docid=$(%23SAPLEVEL1)\ECC6ARC1\00000153.001&logarch=E1.
    E1 is the content repository used for displaying.
    Can anybody tell me in further workflow settings where to mention the viewer settings as use thrid party viewer.
    Thanks in advance
    Shivani
    Edited by: shivani kolluru on Sep 27, 2008 12:33 PM
    Edited by: shivani kolluru on Sep 27, 2008 12:36 PM

    hey
    i need to display the an image.
    I am using apache commons codec for encoding and decoding.
    I have base64 encoded image data, i am decoding this and trying to create an image icon object by passing decoded byte array.
    That encoded and decoded byte array is BMP formatted data.
    or Is it possible to convert BMP data to any other format like png, jpg ....
    thanks

  • I have a 2nd generation iPod that only displays an image of the cord, and an arrow to connect to iTunes. I've done this and it says it needs to be restored. Tried that but I get an error: 1611.  Any suggestions?

    I have a 2nd generation iPod that won't do anything but display the Apple logo for a brief second then an image of the cord suggesting it should be connected to iTunes. I tried to restore it via iTunes but I get an Error: 1611. It does nothing else.  I tried turning off using both buttons...nothing. Any suggestions?

    Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
    Above from:
    http://support.apple.com/kb/TS3694#error1611
    Note it could be a hardware problem

  • How to display the Image in PDF report by using iText Report

    Hi
    Im trying to display the image which is very big one.
    This is my code
    Document document=new Document();
    PdfWriter.getInstance(document,new FileOutputStream("imagePDF.pdf"));
    document.open();
    Image image = Image.getInstance ("1.bmp");
    document.add(new Paragraph("Images in PDF"));
    document.add(image);
    document.close();
    But the image "1.bmp" is displayed partially. Its not spanning to the next page.
    Can anyone help me to solve this one?
    Thanks in Advance
    dhilip

    Do you actually want the image to span multiple pages? I am not sure that will be possible without splitting the image; the itext mailing list would be the place to ask.
    You could make the the page size big enough for the image using Document.setPageSize()

  • Displaying the BLOB files(PDF,TXT,IMAGE,etc) in the Form as an Attachment

    Hi all,
    I need to Open a file which is stored in the Data base Table & the Data type is of BLOB so i am populating the data but i need to display the attachment which is stored in the BLOB file when the button is clicked & i am using Oracle 10g
    I have been just placed a Button & written the below code in WHEN_BUTTON_PRESSED Trigger & i have tried it out by placing a image icon & WHEN_IMAGE_PRESSED but it's not getting worked
    It is Directly Coming in to Exception..
    DECLARE
    vblob BLOB;
    vmime VARCHAR2(30);
    BEGIN
    select attachment,MIME_TYPE into vblob,vmime
    from Table_name_a
    where UNIQUE_ID = 16842;--:ITEM_RESULT.DRAWINGNO;
    htp.init;
    owa_util.mime_header( vmime, false);
    -- owa_util.mime_header( 'image/jpeg', false);
    -- owa_util.mime_header( 'image/jfif', false);
    -- owa_util.mime_header( 'image/gif', false);
    -- owa_util.mime_header( 'application/word' , FALSE);-- to read MS WORD doc
    owa_util.mime_header( 'application/pdf' , FALSE);-- to read ADObE
    message ('attachment type is' ||vmime);
    message ('attachment type is' ||vmime);
    owa_util.http_header_close;
    wpg_docload.download_file(vblob);
    exception
    when no_data_found then
    dbms_output.put_line('1. attachment type is' ||vmime);
    -- NULL;
    end;
    so if any body has any idea Please let me Know
    Hope for the Reply.
    Thanks & Regards
    K Nikethan Reddy

    Hi,
    Thanks for the reply,
    The Document which u Refer is Showing how to Retrieve the Files from the Local System (i.e by giving the path) but i need to populate it from the database.
    K Nikethan Reddy.

  • Display the images in excel using jsp

    Hi
    I am unable to display the images in excel using jsp. I can display the data. but cannot display the images. It is simply showing the icon without the image. Is there any way to display the images. Pls give some sample code to display the images in excel.
    Thanks in advance.

    Presumably whoever created the images in that Excel document just put links to somewhere on their hard drive. Those links don't mean anything when you put the document on somebody else's computer, which is what you are doing. At least, that is my guess.
    You could spend some time looking at the Excel file to see how the images were put in there. Or you could ask the person who put the images in there.

  • Dreamweaver CS4- I can't get my site to display the proper image.

    I have a Dreamweaver CS4 Template with an editable area for a header image. I have already assigned a new image to all the header regions but when I moved the site to the web host the pages will only display the Default header image from the template in the editable region, even though when I check the file name in the Modify Templates window it displays the proper name, but displays the wrong image.
    What is wrong? any help would be greatly appreciated.
    thanks.

    Did you upload the new header image?
    This one is currently being displayed.
    http://stjohnvianney.net/parish_assets/Header_Church_img.jpg
    NOTE: Your email link is wrong.  It points to a file on your local hard drive.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • Displaying the image stored in Blob column

    Hi all,
    I'm trying to print the report with an image. I've stored the image in a Blob column and the format of the image is Jpg.
    I'm using the Reports 10g(10.1.2.0.2). When I'm trying to print the report, I'm getting an error Rep-62203. I want to know whether there are any settings which i need to set to display the image item. I mean to say that are there any registry settings.
    Regards,
    Alok Dubey
    Edited by: Alok Dubey on Dec 1, 2008 12:55 PM

    Hi all,
    I'm trying to print the report with an image. I've stored the image in a Blob column and the format of the image is Jpg.
    I'm using the Reports 10g(10.1.2.0.2). When I'm trying to print the report, I'm getting an error Rep-62203. I want to know whether there are any settings which i need to set to display the image item. I mean to say that are there any registry settings.
    Regards,
    Alok Dubey
    Edited by: Alok Dubey on Dec 1, 2008 12:55 PM

  • Displaying .jpg images stored in the database

    I created a table and a form to store .jpg images then display the .jpg files in a dynamic page.
    I can insert the images and display the dynamic page but selecting the HREF link will not dispaly the .jpg file.
    I used the Metalink DocID: Note:68016.1 Subject:Browsing database image objects to create the package.
    The package code is as follows
    Create or Replace PACKAGE OREF.IMG
    as
    PROCEDURE select_img_table;
    PROCEDURE retrieve_img_data(img_id varchar2);
    end;
    Create or Replace PACKAGE BODY OREF.IMG
    AS
    PROCEDURE select_img_table AS
    CURSOR c1 IS SELECT id, name FROM filestore;
    BEGIN
    htp.bodyopen;
    FOR i IN c1 LOOP
    htp.print(TO_CHAR(i.id));
    htp.print(i.name);
    htp.anchor('../../pls/oref/IMG.retrieve_img_data?img_id='||to_char(i.id),'jpg',null,null);
    htp.br;
    htp.bodyclose;
    END LOOP;
    END select_img_table;
    PROCEDURE retrieve_img_data(img_id varchar2) AS
    Lob_field BLOB;
    buffer RAW(32767);
    offset BINARY_INTEGER:=1;
    buffer_size NUMBER:=32767;
    BEGIN
    SELECT object INTO lob_field FROM filestore WHERE id=img_id;
    OWA_UTIL.MIME_HEADER('image/jpg');
    LOOP
    DBMS_LOB.READ(lob_field,buffer_size,offset,buffer);
    htp.prn(UTL_RAW.CAST_TO_VARCHAR2(buffer));
    offset:=offset+buffer_size;
    END LOOP;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    null;
    END retrieve_img_data;
    END img;
    *The dynamic page Code is as follows:
    <HTML>
    <HEAD>
    <TITLE>Display Filestore Table</TITLE>
    </HEAD>
    <BODY>
    <H2>Display of .jpg files in the Filestore Table</H2>
    <ORACLE>select id, ''||name||''
    from oref.filestore</ORACLE>
    </BODY>
    </HTML>

    You'll need to provide a full URL link to the image ("http://mywebserver/file/images_personnel/28.jpg"), not just a relative path.  Remember, the email client that is used to view the email content knows nothing of the internals of your web server - it can only follow a complete URL to get images and other resources.
    -Carl V.

  • How to display the image which in KM folder using url iview

    Hi Friends
    How to display the image, which is under KM folder structur using the url iview.
    i trying using url iview url as  \document\testfolder\abc.jpg as url for the iview.
    but its now working .. so please help me how to slove this problem
    If is not the correct way then please suggest me best way to achive this.
    Thanks
    Mukesh

    Hi Mukesh,
    I think this may work,
    1, Create a HTML Layout.
        You can put your image wherever  u want with HTML Codes.
        Check this, [Article|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3915a890-0201-0010-4981-ad7b18146f81] & [Help|http://help.sap.com/saphelp_nw04/helpdata/en/cc/00c93e9b2c3d67e10000000a114084/frameset.htm]
        With this, u can use the standard KM commands also.
    2, U need to use KM Navigation iView for this rather than KM Doc iView.
    3, In the Nav iView, u can use &rndLayoutSet=nameOfUrHTMLLayout to force the view with this new layout.
    Regards
    BP

  • Displaying the images in Page 0

    I have uploaded an image wich is attached to a specific application. Now in the Page 0 of that application, I created an HTML region to display the image by specifying the region source as <img src=#IMAGE_PREFIX#dissertation.JPG/>. The application has separate image as logo.
    But when executing, the image is not displaying.
    Deb

    Hi Deb,
    Try either #APP_IMAGES# or #WORKSPACE_IMAGES# instead of #IMAGE_PREFIX# (which is used for images in the /i/ folder on the server). Also note that the filename is case-sensitive.
    Andy

Maybe you are looking for