How to display the Image in PDF report by using iText Report

Hi
Im trying to display the image which is very big one.
This is my code
Document document=new Document();
PdfWriter.getInstance(document,new FileOutputStream("imagePDF.pdf"));
document.open();
Image image = Image.getInstance ("1.bmp");
document.add(new Paragraph("Images in PDF"));
document.add(image);
document.close();
But the image "1.bmp" is displayed partially. Its not spanning to the next page.
Can anyone help me to solve this one?
Thanks in Advance
dhilip

Do you actually want the image to span multiple pages? I am not sure that will be possible without splitting the image; the itext mailing list would be the place to ask.
You could make the the page size big enough for the image using Document.setPageSize()

Similar Messages

How to display the image which in KM folder using url iview

Hi Friends
How to display the image, which is under KM folder structur using the url iview.
i trying using url iview url as \document\testfolder\abc.jpg as url for the iview.
but its now working .. so please help me how to slove this problem
If is not the correct way then please suggest me best way to achive this.
Thanks
Mukesh

Hi Mukesh,
I think this may work,
1, Create a HTML Layout.
    You can put your image wherever u want with HTML Codes.
    Check this, [Article|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3915a890-0201-0010-4981-ad7b18146f81] & [Help|http://help.sap.com/saphelp_nw04/helpdata/en/cc/00c93e9b2c3d67e10000000a114084/frameset.htm]
    With this, u can use the standard KM commands also.
2, U need to use KM Navigation iView for this rather than KM Doc iView.
3, In the Nav iView, u can use &rndLayoutSet=nameOfUrHTMLLayout to force the view with this new layout.
Regards
BP

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

How to display the fields in ALV Output without using Field catalog?

How to display the fields in ALV Output without using Field catalog?
Could you pls tell me the coding?
Akshitha.

Hi,
u mean without building field catalog. is it? I that case, we can use the FM REUSE_ALV_FIELDCATALOG_MERGE.
data: itab type table of mara.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = itab
CHANGING
ct_fieldcat = lt_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
*Pass that field catalog into the fillowing FM
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_grid_title            = 'REPORTING'
            is_layout              = gt_layout
            it_fieldcat             = lt_fieldcat[]
       tables
            t_outtab                = itab.

How to display the data of CJ2C(T-CODE) using web dynpro abap

Hi all:
    How to display the data of CJ2C(T-CODE) using web dynpro abap.
    CJ2C used to display a Gantt Chart.
    Thanks.

Hi,
Create a Value attribute (resource) of type Resource, bind it with the property of File Upload UI element.
On action place the code and Deploy the application
byte[] bytes = new byte[ 1024];
FileOutputStream out = new FileOutputStream( new File( <path in server>));
InputStream in = resource.read( true);
int len;
while( ( len = in.read( bytes)) > 0)
     out.write( bytes, 0, len);
in.close();
out.close();
Regards
     Vinod V

How to display the Buyer's signature in PO BI Publisher Report

Hi,
How to display the Buyer's signature dynamically in XMLP Purchase Order Report.
Please anybody help on this.Your help greatly appriciated.

Hi All once again
I was able to display the signature on XMLP AP Check Print Report by went through the follwoing Tim's blog http://blogs.oracle.com/xmlpublisher/2006/04/13#a12
But in Purchase Order report requirement is different. We need to display the Buyer's signature on XMLP PO Report. So, where is the best place to store the buyers signatures.(For example if we have 10 buyers with 10 signatures respectively then after approving the PO, we should display that particular buyer's signature in PO XML Publisher report).We observed that in byuers & User's form there is no attachment feature enabled.
This is an urgent requiremnt. Please help/guide/suggest to resolve this issue.
Thanks in advance.

How to display the data in PDF format

hi all,
i will give input in my selection screen and i will execute my report then it has to display data in PDF file in some directory (like c or d directory). i refered existingthreads . most of then saying using spool req we can download pdf file i.e. not my requirement. my requirement is when i click on execute button it has to display the data in pdf file with headings.
Anybody can send me the sample code please.
thanks,
maheedhar

Hi Easwar,
i am sending my code. in this one records is splitting into 2 records.
report zmaheedhar.
maheedhar-start
TABLES : vbak.
parameters : p_vbeln type vbak-vbeln.
data : begin of itab occurs 0,
        vbeln type vbak-vbeln,
        ERDAT type vbak-erdat,
        ERZET type vbak-erzet,
        ERNAM type vbak-ernam,
        ANGDT type vbak-angdt,
        BNDDT type vbak-bnddt,
        AUDAT type vbak-audat,
        VBTYP type vbak-vbtyp,
        TRVOG type vbak-trvog,
        AUART type vbak-auart,
        AUGRU type vbak-augru,
        GWLDT type vbak-gwldt,
        SUBMI type vbak-submi,
        LIFSK type vbak-lifsk,
        FAKSK type vbak-faksk,
        NETWR type vbak-netwr,
        WAERK type vbak-waerk,
        VKORG type vbak-vkorg,
       end of itab.
maheedhar-end
DATA: pripar TYPE pri_params,
      arcpar TYPE arc_params,
      lay TYPE pri_params-paart,
      lines TYPE pri_params-linct,
      rows TYPE pri_params-linsz.
DATA: val(1), val1(1).
*---> Local Printer Name defined in SAP, Change NHREMOTE to your local printer
DATA: dest TYPE pri_params-pdest VALUE 'ZNUL'.
DATA: name TYPE pri_params-plist VALUE 'Testing'.
DATA: i_pdf TYPE STANDARD TABLE OF tline.
DATA: spono TYPE tsp01-rqident.
maheedhar-start
top-of-page.
write: 'Sales Document' , 'C Date', 'Entry time', 'Created By','Quotation date',
       'Date','Document Date','SD document category','Transaction group','Sales Document Type',
       'Order reason'.
start-OF-SELECTION.
      select vbeln ERDAT ERZET ERNAM ANGDT BNDDT AUDAT
              VBTYP TRVOG AUART AUGRU GWLDT SUBMI LIFSK
              FAKSK NETWR WAERK VKORG from vbak
        into table itab
        where vbeln = p_vbeln.
maheedhar-end
--- Retreive local printer details
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    destination            = dest
    no_dialog              = 'X'
    immediately            = ' '
IMPORTING
    out_archive_parameters = arcpar
    out_parameters         = pripar
    valid                  = val
    valid_for_spool_creation = val1
EXCEPTIONS
    archive_info_not_found = 1
    invalid_print_params   = 2
    invalid_archive_params = 3
    OTHERS                 = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*-- Set Spool printer details w.r.t local printer
pripar-prdsn = 'DSN'.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    in_archive_parameters    = arcpar
    in_parameters            = pripar
    no_dialog                = 'X'
    list_name                = name
IMPORTING
    out_archive_parameters   = arcpar
    out_parameters           = pripar
    valid                    = val
    valid_for_spool_creation = val1
EXCEPTIONS
    archive_info_not_found   = 1
    invalid_print_params     = 2
    invalid_archive_params   = 3
    OTHERS                   = 4.
IF sy-subrc EQ 0.
---> Triggers the spool creation in the sense all the write statements from hereon will be written to spool instead of screen
NEW-PAGE PRINT ON
NEW-SECTION
PARAMETERS pripar
ARCHIVE PARAMETERS arcpar
NO DIALOG.
ELSE.
WRITE:/ 'Unable to create spool'.
ENDIF.
*--- Output statements
*WRITE:/ 'First Line', 'mahee','lklk','kikik','lokiuj','fffff','kijuyh','fgfgfgfg','gtgtgtgtgtgtgtgtggggggggggggggggggggggggggggggg'.
*WRITE:/ 'Second Line'.
LOOP at itab.
write: itab-vbeln,
        itab-ERDAT,
        itab-ERZET,
        itab-ERNAM,
        itab-ANGDT,
        itab-BNDDT,
        itab-AUDAT,
        itab-VBTYP.
ENDLOOP.
"---> Close spool
NEW-PAGE PRINT OFF.
spono = sy-spono.
Convert ABAP Spool to PDF
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
    src_spoolid                    = spono
    no_dialog                      = 'X'
TABLES
   pdf                            = i_pdf
EXCEPTIONS
   err_no_abap_spooljob           = 1
   err_no_spooljob                = 2
   err_no_permission              = 3
   err_conv_not_possible          = 4
   err_bad_destdevice             = 5
   user_cancelled                 = 6
   err_spoolerror                 = 7
   err_temseerror                 = 8
   err_btcjob_open_failed         = 9
   err_btcjob_submit_failed       = 10
   err_btcjob_close_failed        = 11
   OTHERS                         = 12.
Download PDF contents to presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename                        = 'c:\test.pdf'
    filetype                        = 'BIN'
TABLES
    data_tab                        = i_pdf
EXCEPTIONS
   file_write_error                = 1
   no_batch                        = 2
   gui_refuse_filetransfer         = 3
   invalid_type                    = 4
   no_authority                    = 5
   unknown_error                   = 6
   header_not_allowed              = 7
   separator_not_allowed           = 8
   filesize_not_allowed            = 9
   header_too_long                 = 10
   dp_error_create                 = 11
   dp_error_send                   = 12
   dp_error_write                  = 13
   unknown_dp_error                = 14
   access_denied                   = 15
   dp_out_of_memory                = 16
   disk_full                       = 17
   dp_timeout                      = 18
   file_not_found                  = 19
   dataprovider_exception          = 20
   control_flush_error             = 21
   OTHERS                          = 22.
thanks,
maheedhar

How to display the message along with a value using BBP_CHECK_BADI

Hi Gurus,
I need to display a message dynamically when the user create's a shopping cart. I am using Check_badi for this. i.e., I need to display the buyer number and amount left for him dynamically. I am storing both of them in variables and don't know how to display the messages laong with some message " the amount left for <XXXXXX> is <$$$$$$$$>". Can you help me out.
Thanks,
Neelima

Hi,
you can use the function module 'BBP_PD_MSG_ADD'. This is the function module normally used for the displaying the error messages in SRM.
See wether you can use already available error messages , use the transaction SE91 , and the message class being BBP_PD

How to display the data in PDF format : problem is splitting into 2 lines

Hi ,
I developed one report which downloads the data into PDF format and saved in C drive but my problem is
in my program : Line size of the report is 255 in PDF it is splitting into 2 lines. it has to show in a single line. how to do it. how to reduce the width of the output? i am sending my code below. anybody can suggest me how to do it. if possible please send me the code.
my code:
report zmaheedhar.
maheedhar-start
TABLES : vbak.
parameters : p_vbeln type vbak-vbeln.
data : begin of itab occurs 0,
        vbeln type vbak-vbeln,
        ERDAT type vbak-erdat,
        ERZET type vbak-erzet,
        ERNAM type vbak-ernam,
        ANGDT type vbak-angdt,
        BNDDT type vbak-bnddt,
        AUDAT type vbak-audat,
        VBTYP type vbak-vbtyp,
        TRVOG type vbak-trvog,
        AUART type vbak-auart,
        AUGRU type vbak-augru,
        GWLDT type vbak-gwldt,
        SUBMI type vbak-submi,
        LIFSK type vbak-lifsk,
        FAKSK type vbak-faksk,
        NETWR type vbak-netwr,
        WAERK type vbak-waerk,
        VKORG type vbak-vkorg,
       end of itab.
maheedhar-end
DATA: pripar TYPE pri_params,
      arcpar TYPE arc_params,
      lay TYPE pri_params-paart,
      lines TYPE pri_params-linct,
      rows TYPE pri_params-linsz.
DATA: val(1), val1(1).
*---> Local Printer Name defined in SAP, Change NHREMOTE to your local printer
DATA: dest TYPE pri_params-pdest VALUE 'ZNUL'.
DATA: name TYPE pri_params-plist VALUE 'Testing'.
DATA: i_pdf TYPE STANDARD TABLE OF tline.
DATA: spono TYPE tsp01-rqident.
maheedhar-start
top-of-page.
write: 'Sales Document' , 'C Date', 'Entry time', 'Created By','Quotation date',
       'Date','Document Date','SD document category','Transaction group','Sales Document Type',
       'Order reason'.
start-OF-SELECTION.
      select vbeln ERDAT ERZET ERNAM ANGDT BNDDT AUDAT
              VBTYP TRVOG AUART AUGRU GWLDT SUBMI LIFSK
              FAKSK NETWR WAERK VKORG from vbak
        into table itab
        where vbeln = p_vbeln.
maheedhar-end
--- Retreive local printer details
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    destination            = dest
    no_dialog              = 'X'
    immediately            = ' '
IMPORTING
    out_archive_parameters = arcpar
    out_parameters         = pripar
    valid                  = val
    valid_for_spool_creation = val1
EXCEPTIONS
    archive_info_not_found = 1
    invalid_print_params   = 2
    invalid_archive_params = 3
    OTHERS                 = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*-- Set Spool printer details w.r.t local printer
pripar-prdsn = 'DSN'.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    in_archive_parameters    = arcpar
    in_parameters            = pripar
    no_dialog                = 'X'
    list_name                = name
IMPORTING
    out_archive_parameters   = arcpar
    out_parameters           = pripar
    valid                    = val
    valid_for_spool_creation = val1
EXCEPTIONS
    archive_info_not_found   = 1
    invalid_print_params     = 2
    invalid_archive_params   = 3
    OTHERS                   = 4.
IF sy-subrc EQ 0.
---> Triggers the spool creation in the sense all the write statements from hereon will be written to spool instead of screen
NEW-PAGE PRINT ON
NEW-SECTION
PARAMETERS pripar
ARCHIVE PARAMETERS arcpar
NO DIALOG.
ELSE.
WRITE:/ 'Unable to create spool'.
ENDIF.
*--- Output statements
*WRITE:/ 'First Line', 'mahee','lklk','kikik','lokiuj','fffff','kijuyh','fgfgfgfg','gtgtgtgtgtgtgtgtggggggggggggggggggggggggggggggg'.
*WRITE:/ 'Second Line'.
LOOP at itab.
write: itab-vbeln,
        itab-ERDAT,
        itab-ERZET,
        itab-ERNAM,
        itab-ANGDT,
        itab-BNDDT,
        itab-AUDAT,
        itab-VBTYP.
ENDLOOP.
"---> Close spool
NEW-PAGE PRINT OFF.
spono = sy-spono.
Convert ABAP Spool to PDF
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
    src_spoolid                    = spono
    no_dialog                      = 'X'
TABLES
   pdf                            = i_pdf
EXCEPTIONS
   err_no_abap_spooljob           = 1
   err_no_spooljob                = 2
   err_no_permission              = 3
   err_conv_not_possible          = 4
   err_bad_destdevice             = 5
   user_cancelled                 = 6
   err_spoolerror                 = 7
   err_temseerror                 = 8
   err_btcjob_open_failed         = 9
   err_btcjob_submit_failed       = 10
   err_btcjob_close_failed        = 11
   OTHERS                         = 12.
Download PDF contents to presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename                        = 'c:\test.pdf'
    filetype                        = 'BIN'
TABLES
    data_tab                        = i_pdf
EXCEPTIONS
   file_write_error                = 1
   no_batch                        = 2
   gui_refuse_filetransfer         = 3
   invalid_type                    = 4
   no_authority                    = 5
   unknown_error                   = 6
   header_not_allowed              = 7
   separator_not_allowed           = 8
   filesize_not_allowed            = 9
   header_too_long                 = 10
   dp_error_create                 = 11
   dp_error_send                   = 12
   dp_error_write                  = 13
   unknown_dp_error                = 14
   access_denied                   = 15
   dp_out_of_memory                = 16
   disk_full                       = 17
   dp_timeout                      = 18
   file_not_found                  = 19
   dataprovider_exception          = 20
   control_flush_error             = 21
   OTHERS                          = 22.
thanks,
maheedhar

hi tripat,
actual problem is what u said it is decreased the wiidht of the output.
now the output is:
Sales Document C Date Entry time Created By Quotation date Date Document Date
SD document category Transaction group Sales Document Type Order reason
62741 07/29/1996 11:54:38 DARLENE 00/00/0000 00/00/0000 07/29/1996 C
actual output is:
output should come in a single line. it is splitting into 2 lines.
thanks,
maheedhar

How to display the editable fields in output of an ALV report?

Hi all,
I have a requirement of displaying values in ALV Grid format and above this grid display i have to put some fields , that are editable.
I know making ALV grid fields as editable, but here requirement is to display some fields before displaying the ALV grid dispaly and to enable these fields editable to user and when printing this the values entered by user also has tobe printed.
Please help me on solving this problem? Is it possible to do this with ALV function modules?
Thanks,
Vamshi.

Hi all,
Thanks for your replies.
But this is not my requirement. I mentioned in my question that i too know how to edit the fields in ALV grid report.
Here my requirement is .
name :_____________
amount:____________
alv grid display
Like above i need to display. after name the user can be enter value and after amount also the user can be enter some value at output . But this is not the header of ALV .
Is this possible in classical ALV or Classical report? If not please specify alternative?
Thanks,
Vamshi.

How to display the number of line items in sap-script report?

Hi friends,
I need a help regarding the SAP Script. In my script (report) I create two pages and created three windows (MAIN, HEADER, FOOTER) for each pages. Now the problem is while displaying the fewer line item which can come under the main window of the 1st page these line items are comming perfectly but for the remaining line items that comes on the second page the table headings and the boexs are not comming.
Also it is displaying the total and the amount in text in every pages that should be display in last page.
Here if I eleminate or comments the total and the amount in text for the first page the same is reflected in second page. Also I need to display the page-nor for each pages to displayed.
I am requesting all the people out there kindly help me to solve this issues.
Thanks and Regards

There is no pre built solution for this. But we can show total pages in the report body.
one way is Create a other column in the report with code sum(count(1))/25. that gives you total number of pages. 25 here is no of rows in each page. The code you can write in narrative "Total pages in the report are @5" and out put may be "Total Pages in the report are 30".
If you are using pivot tables, you can try this.
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/
- Madan

How to display the images in the custom pluggable navigation.

Hi,
I have created a custom pluggable navigation and i need to show my custom images for the tabs in the primary navigation. where do i need to put my images and how will i need to render the images. Any thoughts will be helpful.
Thanks in advance - Emmanuel

1- put your images in a directory under the web app directory. Example: app/images/
2- in your jsp, use: String file = application.getRealPath("/images/"); to get the images directory. See http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String)
3- it's not the right forum to post this kind of question. Post them in the JSP/Servlet JSTL forum instead

How to extract the image from pdf file

     Hai friends........
         Is it possible to extract the images in a page from pdf file.
         If so. please share with me.......
    Thanks in advance,
    abu

In later versions of Acrobat you can select an Image with the Select tool, then right-hand click for Save options.
------------->
It helps if you quote your exact version of Adobe Acrobat/Reader - choose [Help, About...] to find this.
Also useful: Version numbers of other software (e.g. Word) if relevant. Age of computer and amount of memory (RAM) available (r/h cllcking on 'My Computer' and choosing Properties gives you this, plus processor speed).

How to display the image while set custom header "x-content-type-options" as "nosniff" in web.config

Hi,
I am using Microsoft ASP.NET TreeView control where I have bound embedded images. Also I have set custom header “x-content-type-options” as
“nosniff” in web.config file.
On hosting the sample containing the above mentioned things in SERVER machine, the images are not visible but its working properly while running sample in local (development) machine.
Kindly provide a solution and find the sample in the below link.
http://goo.gl/6uR2b0
Thanks,
Alagarsamy D.

Hi AlagarBala,
Your issue is related to asp.net/web technology and for a better support on this please post your question to the asp.net forum below, this forum is for C# code issues in speicific:
http://forums.asp.net/
Regards,
Fouad Roumieh

How to Display the Image Rather Than the Link of a Dreamweaver Record From the Database

I wanted the image rather than the link to appear on my page. The link is from my database which is
imported from a .csv file.

You use the link as the value of the src attribute of an <img> tag:
<img src="<?php echo $row_getDetails['image_link']; ?>" alt="My image">

How to display the Image in PDF report by using iText Report

Similar Messages

Maybe you are looking for