Distinct JVMs terminate simultaneously with error code 143

I am running 2 distinct java processes (started in 2 separate JVMs) on a win2k server using JRE 1.3.1_07. Both of these processe spend the majority of their time sleeping, but wake up every 10 minutes to do some work. The processes run for 23 hours and 50 minutes, then shut down and are restarted approximately 30 minutes later.
In each of these processes, I have a catch throwable in main intended to provide a stack trace in the event of a catastrophic error.
Occasionally (without any pattern that I can discern), these two processes suddenly die at exactly the same time. Neither provides a stack trace. The only thing I have to go on is that both JVMs exit with a return code of 143. The windows return code of 143 ("The system cannot join or substitute a drive to or for a directory on the same drive") makes absolutely no sense in the context of what these two processes do.
Sometimes these processes run the entire 23 hours and 50 minutes without a problem. Sometimes the problem occurs within the first 20 minutes. Sometimes it occurs after 20 hours. There is no pattern that I can find relating to when this occurs.
When I look at system monitoring on the box, there are no memory issues or overcommits of any kind occurring at the time the processes died.
Once, I had a third java process running (this process only runs once per day and lasts for about 5 minutes) and all three processes suddenly died with an error code of 143.
I have run these two processes on different boxes with the same intermittent bahavior.
Any help?

Are they accessing a network drive or the internet ?
Maybe the connection times out, or the network server shuts down every night to do a backup.
"Subst" is an old DOS program which mapped a directory to a virtual drive. It's usually used when you log into a network, to map shared directories to the same virtual drive eg X:, for everyone.
Although program return values aren't very reliable.
Error 143 could be a red herring from from the real problem.
regards,
Owen

Similar Messages

2012 Essential R2 Backup unsuccessfull with error code 2147942634

Hi, a planned backup on win srv 2012 essentials R2 terminates unsuccessful with error code 2147942634 and the text "more data is abailable" when beginning backup with the EFI start partition. The other, usually follwing backup-locations,
do not start backup thereafter. Every 2nd backup seems to be affeted. Manually started backups work fine. Mike.

Hi Mandy,
some more monitoring gets these additional info:
- no, it's not a question about "backup once" or scheduled. Every second scheduled backups does not run (backup schedule ist daily 12:00 and 23:00. 12:00 backups are fine, 23:00 backups fail)
- the recommended article provides no help, but checking the event viewer windows aplication points to error ID 517:
- details to this error ID 517:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}"
/>
<EventID>517</EventID>
<Version>1</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated
SystemTime="2015-03-02T22:02:44.547827700Z" />
<EventRecordID>135619</EventRecordID>
<Correlation
/>
<Execution ProcessID="4648" ThreadID="11988" />
<Channel>Application</Channel>
<Computer>S12ER.SV.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTime">2015-03-02T22:00:19.562212400Z</Data>
<Data Name="ErrorCode">0x800700ea</Data>
<Data Name="ErrorMessage">%%2147942634</Data>
</EventData>
</Event>
Mike

Error code 143 on JVM exit

Hello,
I have a program (with multiple threads, running under MS-Windows) which works fine almost all the time.
In one case, it terminated unexpectedly, and the exit code (via ERRORLEVEL) is 143.
There are no other outputs in order to diagnose the problem.
I would like to know what the error code 143 exactly means.
Can anybody give me an advice?
Regards,
Sabrina Werscheid

Hello!
I hope people there is reading old posts too. I have the same problem with code 143. JVM exits unexpectedly, but I believe it is specific block of code which acts differently. I`m trying solution with -Xrs switch, but I`m sure I have no JNI and there is no System.exit() in code at all. Also I know there is no external processes which asks JVM to close.
I have running special FIT tests in child-jvm as ANT task. The exiting is ANT task, not my FIT tests, but at the same time this is not happening on any other processes.
I can`t found any references about "Internal field must be valid". What does it mean? What and where to search for problem?
Any other ideas?
Using JVM 1.5.14

JVM Error Code 143

Hi there, I am running a Java Application as a service. The service halts, not regularly, just every now and then with no consistency. The event log says the JVM has exited with a code of 143. I tried to look up this error but could find very little on it. Does anyone know what causes this? Thanks in advance, Julie.

The 5th entry of this search list relates to Java and an error of 143:
http://www.google.com/search?q=error+143

Maven - ERROR: Maven JVM terminated unexpectedly with exit code 0

Hi All,
I have written pom.xml for auto deployment process between hudson and deployment servers.
The script which i return its working perfectly i can see the application in web logic server. The application has been deployed in the web logic server. No issues that.
All the remaining task is also very well working in the servers but the build is failing as **failed** by saying the below error in hudson
[ServerConnectionImpl.close():332] : Closing DM connection
[ServerConnectionImpl.close():352] : Unregistered all listeners
[ServerConnectionImpl.closeJMX():372] : Closed JMX connection
[ServerConnectionImpl.closeJMX():384] : Closed Runtime JMX connection
[ServerConnectionImpl.closeJMX():396] : Closed Edit JMX connection
**ERROR: Maven JVM terminated unexpectedly with exit code 0**
Sending e-mails to: [email protected]
Finished: FAILURE
I dont why like this happening in the maven.
Here is my maven opts set in Hudson server.
Maven_OPTS : -Xms256m -Xmx1024m -XX:MaxPermSize=512m
kindly help me to resolve this issue. Thanks in advance.
Regards,
Rocky.

Hi Sir,
Please try the following items:
1. if ther is anti-virus installed , please uninstall it temporarily
2. run " sfc /scannow "
3. keep windows up-to-date
4. if you updated some hardware driver please roll it back
5. if the issue persists , please use windows installation media to perform inplace-upgrade for the system
Also please refer to reinstall C++ runtime within the similar thread:
https://social.technet.microsoft.com/Forums/windows/en-US/bf69eeff-24c4-499f-b280-b6a3098f4f9f/problem-with-msvcrtdll-version-70760117744?forum=w7itprogeneral
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Transport control program tp ended with error code 0211

Dear Experts,
I have a problem in doing the import after the client export was successfully done.
I am actaully tring to do a client import/export from the PRD server to DEV server.
On PRD the client is 900 and on the DEV the client is 240.
I have manually copied the transport requests created into the
/usr/sap/trans/cofiles and /usr/sap/trans/data folders to the same on the DEV server.
After coping them,
I have tried to add these transport requests to the DEV server queue, i get the following error message
Transport control program tp ended with error code 0211
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER RT2KT00014 RT1 pf=/usr/sap/trans/bin/T
Return code: 0211
Error text: no info about transport request found
Request: RT2KT00014
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
After this I have tried to add the transports to the buffer at the OS level using the command
./tp pf=TPPARAM addtobuffer "RT2KT00014" RT1 U18 by going to the folder
/usr/sap/trans/bin
But it says that the tp is not found.
I have also checked the permissions for the TRANS folder, it has full access i.e 777
This is where i am struck, and the client has to be imported asap as the requirement for the SUPPORT TEAM is very urgent.
We are on AIX, Oracle 10G and ECC6
Thanks and regards
Harry

Dear Imtiaz,
Thanks for your quick fire reply...
The link helped me but it could not resolve my issue..
Infact i found it my self that the transport requests had to be given full FILE PERMISSIONS at the OS level
I logged in as ROOT
and changed directory to /usr/sap/trans/cofile and gave the command
chmod 777 RT00014.RT2 and
chmod 777 RX00014.RT2
and then went to STMS>SYSTEMS>Import View>Extras>Other requests--> Add ..
Here i added the request nos and then it added up in the queue and then i started the import.
Anyway thank you very for your reply..
Awareded points to you.
Thanks and regards
Harry...

Transport control program tp ended with error code 0203

when i import queue and transport queue from dev to prd ,error show:
Transport control program tp ended with error code 0203
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT DEVK900298 P01 clientP01 U0 pf=/usr/sap/tra
Return code: 0203
Error text: wrong syntax in tp call
Request: DEVK900298
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.

Dear Allen,
The transport control program tp collects all return codes that occur when a tp command is executed. From all of these single return codes, a combined return code is calculated that tp outputs as a result at the end the command. During an import, for example, all return codes for individual import steps are handled. If a special return code does not occur, then the combined return code at the end is the maximum of individual return codes that occur. In addition to the value of the return code, tp also gives a short description of this return code. You can display this short description using the command explainrc.
Normally, all return codes that occur originate from individual transport steps. Since these individual return codes can only have the following values 0, 4, 6, 8, 12, 13, 14, 16, the combined return code also has one of these values. However, if a general error occurs, a single return code over 200 is generated. For example, this could arise if tp cannot establish a connection to the database. The maximum return code for all single transport steps is output in a separate message before specifying the combined returned code. In this case, the combined return code is always the return code of the general error message.
<b>tp Commands:</b>
tp addtobuffer <request> <sapsid>
As of Release 4.6A, an explicit addtobuffer command leaves the position of the entry unchanged, if the relevant transport request is already in the buffer. Only the status of the entry is changed:
Unconditional modes appearing in the command line are added to the unconditional modes in the buffer.
All the steps of the entry are re-initialized.
If the entry found is not an initial entry, the import step for the command file is set to *4000 .
Before you call this command and its options, consider the effects of changing the import sequence.
tp cleanbuffer <sapsid>
This deletes successfully imported change requests from the list of requests that are marked for import into the SAP System <SAPSID>. This function is contained in the commands tp import all <sapsid> and tp put <sapsid> .
tp delfrombuffer <request> <sapsid>
If the specified request is marked for import into the specified SAP System, this flag is deleted from the import list.
Before you call this command, consider the effects of changing the import sequence.
As of Release 4.6A: If a transport request was only partially imported, you can delete this type of transport request from the buffer. However, if a deleted transport request is placed in the buffer (without having been initially or completely imported), the attributes of the old entry are reactivated. This means the return codes, the unconditional modes and tags of the deleted entry appear in the new entry.
tp delstopmark <sapsid>
If the list of requests marked for import into the specified SAP System contains a STOP mark, the mark is deleted.
tp export <request>
This exports the complete request from the source system. This command starts the export of a request from the operating system level. Only use this command in exceptional cases. The SAP System uses the command expwbo to release requests from CTS transactions.
tp reformatbuffer <sapsid> [options]
This automatically reformats the entire buffer.
As of Release 4.5A, there are 2 different formats for buffer entries. (As of Release 4.5A, tp can work with both formats, and with a puffer containing heterogeneous entries. As of Release 4.6A, tp can work with 3 formats.)
However, in certain cases entries with the old formatting have to be reformatted during the normal run of tp . In this case, the entire buffer is automatically reformatted.
If you use the options downtorelease and Iagree for command reformatbuffer , you can format the buffer so that its formatting is compatible with an older release:
Option downtorelease <Release>
The command reformatbuffer with this option formats the buffer so that the formatting corresponds to the one used in an old release. This is necessary if tp writes buffer entries to the buffer of another system, but uses a buffer format that the transport control programs does not understand in this system.
Since older formats cannot store the same amount of information as the newer ones, some information contained in the original buffer may not be stored in the unformatted buffer. This may lead to data loss.
To avoid data loss, the original buffer is stored. In addition, you have the following functions:
Displaying the unformatted buffer (using showbuffer <SID> )
Displaying the original buffer (using showbuffer buffer=<SID>SAV )
Accepting the unformatted buffer (using reformatbuffer and the option Iagree yes )
Resetting the changes (using reformatpuffer and the option Iagree no )
If you call reformatpuffer using downtorelease , tp displays in detail if information was lost by reformatting, and what that information was. tp also names the commands that is has to execute to accept or reject the changes.
If you use the option downtorelease , you must also specify the option Iagree with yes or no . You cannot use the transport system until you decide to accept or reject the changes.
Option Iagree
Here are the following values for this option:
yes ( true )
Accept the change made by tp reformatbuffer <SID> downtorelease <rel>
In this case, tp deleted the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
no ( false )
Reject the change made by tp reformatbuffer <SID> downtorelease <rel> In this case, tp copies the backup of the original buffer back and deletes the buffer semaphore file that was lifted for security reasons at the first call of reformatbuffer
tp setstopmark <sapsid>
A special STOP mark is added to the list of requests registered for import into the specified SAP System. The commands tp import all <sapsid> and tp put <sapsid> only process the requests in front of this stop mark.
If there is no stop mark, it is automatically generated by the commands
tp import all <sapsid> and tp put <sapsid> .
When all the requests in front of the stop mark have been imported successfully, at the end of all the calls the related marks and the mark itself are deleted.
A STOP mark can only be placed at the end of the change requests that have already been marked. In addition, it can only be set if no other mark of the same kind already exists.
tp showparams <sapsid>
This tp function displays which values the individual parameters of the transport profile have for the current SAP System.
tp verse <request>
This creates versions of the objects in the specified request. This transport step is contained in command export .
As of Release 4.5A, more actions that prepare the export are performed in this step.
Thanks and Regards,
Naveen.

Tp ended with error code 0247 - addtobuffer has problems with data- and/or

Hello Experts,
If you give some idea, it will be greatly appreciated.
This transported issue started coming after power outage, sap system went hard shutdown.
Then we brought up the system. Before that , we do not have this transport issue.
our TMS landscape is
DEV QA-PRD
SED-SEQSEP
DEV is having the TMS domain controller.
FYI:
*At OS level, when we do scp command using root user, it is fine for any TR.
In STMS, while adding TR in SEQ(QA system), we are getting error like this.
Error:
Transport control program tp ended with error code 0247
     Message no. XT200
Diagnosis
     An error occurred when executing a tp command.
       Command:        ADDTOBUFFER SEDK906339 SEQ client010 pf=/us
       Return code:    0247
       Error text:     addtobuffer has problems with data- and/or
       Request:        SEDK906339
System Response
     The function terminates.
Procedure
     Correct the error and execute the command again if necessary.
This is tp version 372.04.71 (release 700, unicode enabled)
Addtobuffer failed for SEDK906339.
Neither datafile nor cofile exist (cofile may also be corrupted).
standard output from tp and from tools called by tp:
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247

when we do scp using sm69,
SEDADM@DEVSYS:/usr/sap/trans/cofiles/K906339.SED SEQADM@QASYS:/usr/sap/trans/cofiles/.
it throws the error like below,
Host key verification failed.
                                                                                External program terminated with exit code 1
Thanks
Praba

CC app manager update failed with error code 50 after reaching about 35%

Trying to update the CC app manager. The update is always very slow (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks. I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
The user suggested fix that worked for me was:
1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
2) Started the creative cloud desktop app.
3) The app said it needed to be updated. I hit the update button.
4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
5) Restarted computer in normal mode.
6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

[ForumFAQ]How to troubleshoot error "SSPI handshake failed with error code 0x80090324"

Understanding the problem:
When connect to SQL Server with Windows authentication, you may receive the following message in the SQL Server error log:
SSPI handshake failed with error code 0x80090324, state 14 while establishing a connection with integrated security; the connection has been closed.
Security Support Provider Interface (SSPI) is a set of Windows APIs that allows for delegation and mutual authentication over any generic data transport layer, such as TCP/IP sockets. SQL Server supports Kerberos indirectly through the Windows Security Support
Provider Interface (SSPI) when SQL Server is using Windows Authentication.
"SSPI Handshake Failed" error happens usually when connection failed between the server and domain controllers or failed Kerberos Authentication. There are many reason for SSPI Handshake error to appear in SQL Server error log.
Troubleshot the problem:
Download and install the Windows error code lookup tool Err.exe to view error descriptions for Windows Error Codes.
The error code 0x80090324 (SEC_E_TIME_SKEW) means "clock on client and server machines are skewed". In most case, this is a Kerberos issue. Kerberos is using a timestamp to protect against replay attacks. The maximum time skew that can be tolerated
between a ticket's timestamp and the current time at the KDC is 5 minutes by default.
Also check the Windows Event Log of client machine, domain controller and the SQL Server machine for existence of W32time error messages.
The solution:
Make sure the clock of client server, domain controller and the server running SQL Server are within five minutes of each other. Or Resynchronize the clock by run w32tm /resync on client machine and SQL Server machine.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

This error can happen due to Active Directory configuration issue or Network related issues. Assuming they are fine,
another reason could be related to fail Kerberos Authentication to connect to SQL Server.
In Windows 2003 and above, the default method of establishing a connection is Kerberos but if it fails, then connection may be established using NTLM. An error may be registered on SQL Server error log due to Kerberos failure.
To confirm if you have any database connection using Kerberos authentication, run this on your SQL Server
SELECT distinct auth_scheme FROM sys.dm_exec_connections
If you only see NTLM and SQL then, there is no Kerberos connection.
To use Kerberos, the client and SQL Server must be in the same domain or trusted domains and a Service Principal Name (SPN) must be registered with Active Directory for SQL Server service account.
You can check if the service account already has SPN, by running this on the SQL Server
setspn -l <domain\sqlserviceaccount>
If you don't see anything starting with MSSQLSvc\ then the account is not setup with SPN.
You can manually register SPN as a Domain Administrator using these commands.
To      create an SPN for the NetBIOS name of the SQL Server use the following      command:
setspn –A MSSQLSvc/<SQL Server computer name>:1433      <Domain\Account>
To      create an SPN for the FQDN of the SQL Server use the following command:
setspn      -A MSSQLSvc/<SQL Server FQDN>:1433 <Domain\Account>
If SQL Server service account is granted "Validated write to service principal name" privilege in Active Directory, SQL Server database engine will register itself when it starts and unregisters at shutdown. If you Domain Administrators do not permit this setting
then you should manually register the SPN and the SSPI error will go away.
Also the SQL Server service account must be granted "Account is trusted for delegation" privilege in Active Directory. If your SQL Server connects to other SQL Server using Linked Server then the server must also be granted "Trust this computer for delegation
to any service" privilege.
For a named instance, you can use the FQDN of the named instance instead of SQL Server FQDN and use the port number.
For a clustered server, you should use the FQDN of the SQL Server virtual name. In this case you will need two entries, one with port name and one without such as
setspn -A MSSQLSvc/<Virtual SQL Server FQDN> <Domain\Account>
setspn -A MSSQLSvc/<Virtual SQL Server FQDN>:1433 <Domain\Account>
Kerberos authentication works when SQL Server, Service Account and Windows account accessing the SQL Server are in same windows domain. If anyone these are in different domain, there must be bidirectional trust established between the domains, otherwise it
does not work.

Help with Transport control program tp ended with error code 0203

when i import queue and transport queue from dev to prd ,error show:
Transport control program tp ended with error code 0203
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT DEVK900298 P01 clientP01 U0 pf=/usr/sap/tra
Return code: 0203
Error text: wrong syntax in tp call
Request: DEVK900298
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.

Thank you !
My DEV system TP profile parameters is :
TRANSDIR            = /usr/sap/trans
DEV/CTC             = 0
DEV/DBHOST          = P550A
DEV/DBLIBPATH       = /usr/sap/DEV/DVEBMGS01/exe
DEV/DBNAME          = DEV
DEV/DBTYPE          = ora
DEV/NBUFFORM        = 1
DEV/TP_VERSION      = 266
#System from Transport Domain DOMAIN_P01
#TMS:0002:DOMAIN_P01
P01/DUMMY           = 1
P01/NBUFFORM        = 1
P01/TP_VERSION      = 266
P01/CTC             = 1
My PRD system TP profile parameters is :
P01/CTC             = 0
P01/DBHOST          = XCPRD01
P01/DBLIBPATH       = /usr/sap/P01/DVEBMGS01/exe
P01/DBNAME          = P01
P01/DBTYPE          = ora
P01/NBUFFORM        = 1
P01/TP_VERSION      = 266
#System from Transport Domain DOMAIN_DEV
#TMS:0009:DOMAIN_DEV
DEV/DUMMY           = 1
DEV/NBUFFORM        = 1
DEV/TP_VERSION      = 266
DEV/CTC             = 1

OPatch failed with error code 73

Friends,
We are getting below error message while firing $ORACLE_HOME/OPatch/opatch lsinventory.Please suggest me whether what could be the reason for this.Appricate your help.
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
Locker::release()
OUISessionManager::unRegister()
Un-Registering the caller : OPatch
LsInventory::getInstance() returns
LsInventorySession failed: Unable to create patchObject
Cleaning up the directory : "/oracle/rdbms/10.2.0.4/.patch_storage/patch_unzip"...
OPatch failed with error code 73
Regards,
Vinay

Following these instructions solved the problem for me, maybe they will help you.
Issue 3: On Linux AMD x86-64 on RHEL4 systems, if you run OPatch in -report mode, it detects the incorrect platform and then terminates with errors similar to the following:
Apply Session failed: ApplySession failed to prepare the system.
OPatch failed with error code 73
Workaround: Set the OPATCH_PLATFORM_ID environment variable to point to the AMD64 Linux platform, whose ID is 226. For example:
export OPATCH_PLATFORM_ID=226
Then re-run OPatch in -report mode, for example:
opatch apply -report
Or
opatch rollback -report

ReleaseRequest failed with error code 0x80004005 \ Task Sequence Manager could not release active TS request. code 80004005

Hi All,
I am trying to deploy an OS but the deployment is failing part way through. I have searched the logs and identified the error: Task Sequence Manager could not release active TS request. code 80004005
If anyone could assist with this is would be much appreciated.
Many thanks
Logs below:
<![LOG[Unlocked ActualConfig successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7898">
<![LOG[Unlocked policy transaction lock successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7904">
<![LOG[Raising event:
instance of CCM_PolicyAgent_SettingsEvaluationComplete
ClientID = "GUID:8388E2E2-7642-4436-88D0-FC9335F6D56E";
DateTime = "20141218122103.273000+000";
PolicyNamespace = "\\\\wst0339\\root\\ccm\\policy\\machine\\actualconfig";
ProcessID = 1748;
ThreadID = 1752;
]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="event.cpp:729">
<![LOG[Successfully submitted event to the Status Agent.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="event.cpp:747">
<![LOG[End TS policy evaluation]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="policyutil.cpp:10580">
<![LOG[Policy evaluation initiated]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:3387">
<![LOG[Sending success status message]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanager.cpp:659">
<![LOG[MP server http://LONSVR0150.uk.ham.local. Ports 80,443. CRL=false.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4855">
<![LOG[Setting authenticator]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4877">
<![LOG[Set authenticator in transport]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:7592">
<![LOG[Sending StatusMessage]LOG]!><time="12:21:03.304+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:4020">
<![LOG[Setting message signatures.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1292">
<![LOG[Setting the authenticator.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1322">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: LONSVR0150.uk.ham.local:80 CCM_POST /ccm_system/request]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="1"
thread="1752" file="libsmsmessaging.cpp:8422">
<![LOG[Request was succesful.]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:8758">
<![LOG[Finalize logging request ignored from process 1748]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tslogging.cpp:1737">
<![LOG[Waiting for CcmExec service to be fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4019">
<![LOG[CcmExec service is up and fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4024">
<![LOG[Access handle will be read from _SMSTSActiveRequestHandle]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:99">
<![LOG[Access handle: {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:111">
<![LOG[Attempting to release request using {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752"
file="tsmanagerutils.cpp:118">
<![LOG[CoCreateInstance succeeded]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:133">
<![LOG[pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136)]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager"
context="" type="0" thread="1752" file="tsmanagerutils.cpp:136">
<![LOG[ReleaseRequest failed with error code 0x80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="3" thread="1752" file="tsmanagerutils.cpp:136">
<![LOG[Task Sequence Manager could not release active TS request. code 80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="2" thread="1752"
file="tsmanagerutils.cpp:165">
<![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="commandline.cpp:1098">
<![LOG[Exiting with return code 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="tsmbootstrap.cpp:1032">
<![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="commandline.cpp:1098">
<![LOG[Task sequence completed 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1384">
<![LOG[Uninstalling Setup Hook]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1427">
<![LOG[Removing setup hook from registry.]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="0" thread="788" file="vistasetuphook.cpp:143">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDGINA.DLL]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDSETUPHOOK.EXE]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
<![LOG[Successfully removed C:\WINDOWS\system32\_SMSOSDSetup]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1220">

4005 can mean a few things, Some common can be The wrong BIOS time, or a a bad Hard drive. look at those two first.

Server https-WEB: CORE0125 The server terminated abnormally with error code

"Server https-WEB: CORE0125 The server terminated abnormally with error code 0, An attempt will be made to restart it. "
This happens every time I reboot the server or logoff. It has no ill effect on the server itself except generating these event log errors I am using Sun One 6.1 SP 1 on a wondows 2003 server. I have to resolve this beofore I can go any furthur in my project. Any help? This error comes up for both the web servive and the admin service.

Thanks to a post I just discovered, I have solved this problem.
The JVM within Sun Web Server is accepting kill signals from Windows when users logoff. When the JVM dies, apparently the web server service just dies as well. It's a long story and I don't really care to understand it fully.
You can refer to the thread I found for the solution of passing the JVM a startup option to ignore these signals.
http://swforum.sun.com/jive/thread.jspa?forumID=16&threadID=23382
Or, you can just disable the JVM completely as I did. Though there is a checkbox for this for user-defined servers under the Java tab. I couldn't find where to do this for the admin server itself, so I commented out the line in magnus.conf that loads j2ee-plugin.dll.
We'll see if this causes any other problems, but so far so good.

TS: ReleaseRequest failed with error code 0x80004005... Help..

This error popped up.. Any ideas?
started seeing this error:<![LOG[Access handle will be read from _SMSTSActiveRequestHandle]LOG]!><time="13:04:07.065-60" date="02-21-2014" component="TSManager" context="" type="1" thread="2940" file="tsmanagerutils.cpp:100">
<![LOG[Access handle: {CA7B9D19-7EA9-4E71-BF54-82671EC3E2D1}]LOG]!><time="13:04:07.065-60" date="02-21-2014" component="TSManager" context="" type="1" thread="2940" file="tsmanagerutils.cpp:111">
<![LOG[Attempting to release request using {CA7B9D19-7EA9-4E71-BF54-82671EC3E2D1}]LOG]!><time="13:04:07.065-60" date="02-21-2014" component="TSManager" context="" type="1" thread="2940" file="tsmanagerutils.cpp:119">
<![LOG[CoCreateInstance succeeded]LOG]!><time="13:04:07.065-60" date="02-21-2014" component="TSManager" context="" type="1" thread="2940" file="tsmanagerutils.cpp:133">
<![LOG[pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136)]LOG]!><time="13:04:07.065-60" date="02-21-2014" component="TSManager" context="" type="0" thread="2940" file="tsmanagerutils.cpp:136">
<![LOG[ReleaseRequest failed with error code 0x80004005]LOG]!><time="13:04:07.065-60" date="02-21-2014" component="TSManager" context="" type="3" thread="2940" file="tsmanagerutils.cpp:136">
<![LOG[Task Sequence Manager could not release active TS request. code 80004005]LOG]!><time="13:04:07.065-60" date="02-21-2014" component="TSManager" context="" type="2" thread="2940" file="tsmanagerutils.cpp:166">
<![LOG[Process completed with exit code 0]LOG]!><time="13:04:07.080-60" date="02-21-2014" component="TSMBootstrap" context="" type="1" thread="2848" file="commandline.cpp:1123">
<![LOG[Exiting with return code 0x00000000]LOG]!><time="13:04:07.080-60" date="02-21-2014" component="TSMBootstrap" context="" type="1" thread="2848" file="tsmbootstrap.cpp:1195">
<![LOG[Process completed with exit code 0]LOG]!><time="13:04:07.096-60" date="02-21-2014" component="OSDSetupHook" context="" type="1" thread="560" file="commandline.cpp:1123">
<![LOG[Task sequence completed 0x00000000]LOG]!><time="13:04:07.096-60" date="02-21-2014" component="OSDSetupHook" context="" type="1" thread="560" file="basesetuphook.cpp:1523">
<![LOG[Uninstalling Setup Hook]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="1" thread="560" file="basesetuphook.cpp:1566">
<![LOG[Removing setup hook from registry.]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="0" thread="560" file="vistasetuphook.cpp:143">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDGINA.DLL]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="1" thread="560" file="basesetuphook.cpp:1312">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDSETUPHOOK.EXE]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="1" thread="560" file="basesetuphook.cpp:1312">
<![LOG[Successfully removed C:\WINDOWS\system32\_SMSOSDSetup]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="1" thread="560" file="basesetuphook.cpp:1349">
<![LOG[RegQueryValueExW failed for Software\Microsoft\SMS\Task Sequence, SMSTSEndProgram]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="2" thread="560" file="utils.cpp:261">
<![LOG[GetTsRegValue() failed. 0x80070002.]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="2" thread="560" file="utils.cpp:279">
<![LOG[End program: ]LOG]!><time="13:04:13.283-60" date="02-21-2014" component="OSDSetupHook" context="" type="1" thread="560" file="basesetuphook.cpp:1580">
Kindest regards, Martin

well.. it seems it finished the deployment of my client (windows 7) but at the end of the smsts.log I see the above..
I am just wondering what the cause of the issue is.. and how I can fix it..
Kindest regards, Martin

Distinct JVMs terminate simultaneously with error code 143

Similar Messages

Maybe you are looking for