Distribution kit error

Hello,
as explained here I was able to build a distribution kit. I installed it successfully on PC 1, ran the program, fine. Today I decided to distribute it to a different computer, PC 2 (actually the same configuration, XP SP3), created a new distribution, but now the installation fails with the following error:
I am attaching the ini file and hope that somebody can assist me...
Thanks!
Attachments:
setup.ini ‏2 KB

Did you copy the whole distribution before running the installer? The error indicates that the WindowsInstaller-KB893803-v2-x86.exe file in the supportfiles folder was not found. Can you confirm that it is there?
Mert A.
National Instruments

Similar Messages

LabWindows/CVI Message Creat Distribution Kit Error 26251

I get this message when I'm trying to make a distribution kit for my application :
Create Distribution Kit Error 26251:
Error Copying generated CAB file to build location because the location does not exist ,is not writeable, or has insufficient space.
I don't think that it is a space problem because I have 37.5Go used sapce and 31.7Go free sapce
enclosed a print screen of the folder attributes in witch i try to creat my distribution kit
Thank you for help
Attachments:
folder attributes.gif ‏12 KB

Are you including the run-time engine in the distribution kit? I have found a KB that suggests removing the run-time engine. Let me know if that allows the build to complete.
AE KB 3QDE5RO1: Why am I Getting Errors When Building an Application Using Application Builder?
http://digital.ni.com/public.nsf/allkb/1717B1A92B71C78F8625709A006EC080?OpenDocument
Regards,
Shawn S. | NIC
Instrument Driver/IVI PSE
National Instruments

Get error from SQL AGENT: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D024

I am running SQL Agent that executes an SSIS process from sql server1. The SSIS process executes its SQL/tables/sp’s against another sql server2.
I get an error after adding data flow tasks with transaction supported within a sequence with transaction required. The error, “The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D024 "The transaction
manager has disabled its support for remote/network transactions"
Prior to adding this sequence everything was working from sql agent, and there were other sequences with oledb destinations.
Everything works when running within SSIS Package.
I see this article on similar issue,
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0bfa2569-8849-4884-8f68-8edf98a9b4fe/problem-to-execute-a-package-and-tasks-with-a-certain-transactionoption-property-i-need-help?forum=sqlintegrationservices
“I had similar issue and solved by setting the following on both the machines. Allow Remote Clients, Allow Remote Administration,
Allow Inbound Clients, Allow Outbound Clients, and TIP are enabled in Component Services/My Computer/Properties/MSDTC/Security Configuration.”
I don’t want to remove transaction required for the “Remove Duplicates from Staging” sequence.
Anyone seen this?
Greg Hanson

DTC was running on remote computer. The problem was it was no longer accepting transactions from remote servers. This was in SSIS so I had to turn to "Transaction Supported" for all Data Flow Transactions.
Greg Hanson

Can´t install voice over kit (error 32) what to do?????

Can´t install voice over kit (error 32)
please tell me what is it and how can i remove this error?

sono andato su C: ho cercato ipodvoiceoversetup e l'ho installato sul pc. ho riprovato e ha funzionato

ORA-01591: lock held by in-doubt distributed transaction string error

Hi Gurus,
I am getting the error
ORA-01591: lock held by in-doubt distributed transaction string error while running once procedure.
Procedure basically inserts 2 tables and update 1 table.
The order of execution is given below.
However I get the error as table _a locked.
Can you please help me how to handle this ?
Begin
Insert into table_a values (values1, value2); -- (our DB)
Insert into table_b@remote_DB values (value1, value2); --( REMOTE DB)
update table C ; -- (our DB)
commit; -- when I debugged I get exception with the sql error above in this commit.
End;

Tina wrote:
Hi Gurus,
I am getting the error
ORA-01591: lock held by in-doubt distributed transaction string error while running once procedure.
Procedure basically inserts 2 tables and update 1 table.
The order of execution is given below.
However I get the error as table _a locked.
Can you please help me how to handle this ?
Begin
Insert into table_a values (values1, value2); -- (our DB)
Insert into table_b@remote_DB values (value1, value2); --( REMOTE DB)
update table C ; -- (our DB)
commit; -- when I debugged I get exception with the sql error above in this commit.
End;
01591, 00000, "lock held by in-doubt distributed transaction %s"
// *Cause: Trying to access resource that is locked by a dead two-phase commit
//          transaction that is in prepared state.
// *Action: DBA should query the pending_trans$ and related tables, and attempt
//          to repair network connection(s) to coordinator and commit point.
//          If timely repair is not possible, DBA should contact DBA at commit
//          point if known or end user for correct outcome, or use heuristic
//          default if given to issue a heuristic commit or abort command to
//          finalize the local portion of the distributed transaction.

Keep on getting message "web kit error domain error 204" how to fix this

the message web kit error domain error 204 comes up what does it mean and how do i fix it?

Cache-Control max-age=0
? If you change that value in a header editor, does the error still occur?
I think this add on allows you to do this? [https://addons.mozilla.org/en-US/firefox/addon/live-http-headers/?src=search]

No Driver Error when including Traditional DAQ in CVI 9.0 Distribution Kit

I have some legacy code (CVI 6.0) that I wanted to upgrade recently. The biggest reason was the ability to add the device drivers to the distribution kit. When I installed the software on a new machine I got a No Driver Error when doing a CounterStart call . In the past that error meant that I had not included CVI support when I installed Traditional DAQ. Since it was installed as part of a distribution kit I can't see what elements were installed. I assume since it was included as part if a CVI distribution kit that CVI support is automatically. How can I get rid of the no driver error?
Thanks,
CP
Solved!
Go to Solution.

Hi, Clutch
try this, build->distribution->managing distribution -> build step. and in drivers&components Table, you can select the driver you want to include.
see graph below
hope this can help !
B.R
Gerry
Attachments:
kits.JPG ‏116 KB

CVI 8 has unknown error while building distribution kit.

I installed the CVI 8 upgrade I recieved in the mail. Now it gives an error while trying to make a distribution kit. I noticed the new distribution manager and created a new entry, leaving everything at the defaults. I chose build and it says "An unknown error occured." I have played with the settings for an hour or so and on occation it will give a different error: "Internal API function call order violation." Nothing I have tried has allowed me to generate a distribution kit. The only thing I can think of that might be related is that I uninstalled CVI 7.1 after installing 8.0. I am surprised that this was not automatic. Why would i need 2 versions of labwindows on a machine at once?

Hello Vahid,
I'm sorry to hear you are receiving errors when building your
distribution kit. First of all, if you try to build one of the
shipping examples into a distribution kit, do you get the same
error? Are you currently trying to convert a 7.1 distribution kit
into an 8.0 distribution kit? Also, what drivers, if any, are you
adding into your application? Also, if you could give me some
more information on a list of things you did to reproduce the problem,
it would be helpful to reproduce it on my end.
Regarding your second questions, one particular reason why a customer
would want both versions of CVI on their machine might be if they are
developing an application that needs to run on a CVI 8.0 unsupported
operating system. CVI 8.0 and the 8.0 runtime engine are only
supported on Windows 2000 and Windows XP, so in order to develop your
application for another operating system, you would need one of the
other versions of CVI and create a distribution kit in that
version. Note that CVI's list of currently supported operating
systems closely follows Microsoft's currently supported operating
systems.
Hope that helps, and I look forward to your response.
Thanks.
Wendy L
LabWindows/CVI Developer Newsletter - ni.com/cvinews

Installation package from dist kit error: This installation package could not be opened by windows

Hi-
Can you please assist me with this error. I have created a dist kit which installs correctly on my PC that has the development environment installed (CVI2012), but fails install on new PC running Win7 (no dev environment installed). The error message is below. Is sometimes will go through the whole installation but never installs it on the PC. Sometimes is will error out right away as in pic below. Can you help? I don't know if this is a Windows problem or an NI problem.
Thanks-
Blue
Solved!
Go to Solution.
Attachments:
dist kit failure.JPG ‏117 KB

This error also occurs if the install package cannot be accessed properly (network connection, scratched disk, etc.) You could try copying the files directly to the computer to run the install or a new disc if it is scratched).
See example of this issue below for installing LabVIEW from DVD:
http://digital.ni.com/public.nsf/allkb/27BD42F4FDCBD4E7862576DD0057ADA5?OpenDocument
This might help eliminate issues other than the actual installer having an error.
- FCTesting

Distribution kit calling 32Bit or 64Bit executable

Hello,
my CVI app distribution calls an executable that installs a hardware driver. Unfortunately, that executable (DPInst.exe) has separate versions for 32bit and 64bit OSs.
Question:
can the distribution kit (CVI 2009) be configured to call e.g.
"DPInst32.exe" when my app gets installed on a32bBit system, and
"DPInst64.exe" on a 64bit system?
or
What would be an other solution for that kind of problem?
Thanks,
Greg

Hello Eren,
thanks for you feedback. I don't want to distribute and maintain different versions for 32bit and 64 bit OS of my CVI application, just because a small USB driver of an accessory has two versions. In the meantime, I came up with a different idea.
The distribution calls an executable that
a) checks wether it runs on a 32bit or 64bit OS
b) then calls the correct DPInst.exe version
This is quite easy:
I'm using this example code to check the OS version.
with that I call this code at the end of the installation:
void main()
char path[512];
int status;
status = GetDir (path);
   if(IsWow64()) strcat(path,"\\64bit\\");
   else strcat(path,"\\32bit\\");
status = SetDir(path);
LaunchExecutable ("DPInst.exe");
void main()
char path[512];
int status;
status = GetDir (path);
if(IsWow64()) strcat(path,"\\64bit\\");
   else strcat(path,"\\32bit\\");
status = SetDir(path);
LaunchExecutable ("DPInst.exe");
This should do the trick.
Best Regards,
Greg

Connecting my ipad mini to my camera using the USB camera kit error message 'device is to powerful' keeps popping up.

I am trying to connect my iPad mini to my Samsung camera using the USB camera kit, I keep getting the error message ' device to powerful'. Is there anyway to fix this or do I need to take it back?? The shop assistant in Currys assured me it should work and it wasn't cheap at £25 for a tiny wire! I have read other posts concerning this but they are dated quite a while ago so just wondered what the newest advice was concerning this. Thanks

The camera is drawing too much power for your iPad. This can happen on cameras which charge their batteries using the USB connection. Make sure that you have the camera set to the correct settings for picture transfer - check the documentation that came with the camera.
Note that you can return the USB kit and get the SD card adaptor or get a powered USB hub if you can't get the camera to work any other way.

Distribution kit with DLL

I use LabWindows CVI 8.0.1 on an XP machine.
I have distributed several applications to other PCs without any problem.
Now I try to distribute an application with the name "client" that includes a DLL and I do not seem to be able to install it on another PC.
On the destination PC, I see the following message:
"Error 1334. The file CLIENT.EXE.MDF100 cannot be installed because it cannot be found in the cabinet file 'Distfile.cab'"
I checked the contents of this file and indeed it holds the file "Client.exe" and "adb_dll.dll". But the client.exe.MDF100 file is not included.
As a check I verified the distribution of another application without a dll and there is indeed an MDF100 file with the application name.
If I use a PC on which there is already a CVI 8.0.1 application installed (and hence all the CVI dlls are in place) and I just copy the client.EXE and the adb_dll.DLL file to new directory, the application works.
I concluded that the problem lies in the installer who somehow puts the EXE file in the distfile.cab instead of the compacted version MDF100.
How can I solve this ?
Francis

Hi Francis,
Do you have any special characters (non-alpha/numeric i.e.: "+","-","/", ...) in your file names or directories in this project or distribution? This is usually the cause of this error, but there could be something else as well.
Keep me inform about the problem.
Julien Roland - District Sales Manager
NI Belgium - Technical Support
Don't forget to rate a good answer

IPad camera kit error "device uses too much power"

Got the camera kit....when I attach it I get an error that says the device uses too much power. I've shut down and restarted the iPad several times and still get the same error. Anyone know what I can do?

I have a camera that uses compact flash cards therefore I have been experimenting with card readers to avoid draining the camera battery when downloading the images to the iPad.
I have been using the USB part of the camera connection kit with a multi card reader, at first I could not get anything to work, I thought ' the not enough power reason, I sorted out a powered USB hub to try, again no good, I disconnected everything and thought one last try, I put the card in the reader, connected the USB cable to the USB part of the camera connection kit and finally inserted the whole lot into the iPad, to my surprise the light on the card reader came on and a few seconds later 70 nef files were previewed on the screen.
I repeated the above several times with the same results, I then tried two other card readers again OK, but if I just removed the card and then re inserted it nothing happened, these card readers are no name supermarket specials.
I may have been lucky but I will continue to try my method and see if it holds up to regular use, so make the physical connection to the iPad the last part of the connection process, I hope this is of some help to others.

VoiceOver Kit error occurred (1701)

I've received a messege to update the VoiceOver Kit to iTunes and iPod Shuffle, the system is downloaded but shows the message below when it is prepared to be installed. Then How can I solve this problem?
"ITunes was unable to install the VoiveOver Kit. An unknown error occurred (1701)."
ITunes version: 11.1.2 (32) 64-bit
IPod Version:1.0.1
OS X Mavericks

Problem solved here! OS X only.
Solution for Voiceover kit installation issues. Errors 1260 and 1701. [MAC Only]

Bursting and Distributing a Report Error

Dear All,
Following the example of bursting and distribution in below document
as similar case is required in my production environment.
[http://download-west.oracle.com/docs/html/B10602_01/orbr_dist.htm]
i have followed the entire sequence as mentioned except i have to place it on Application server path
and run it from Application Server path URL
http://MYSERVER:7778/reports/rwservlet?report=Inventoryreport_Kashif_dist.rdf
&userid=oe/oe@kashif&authid=admin/admin&distribute=yes&destination=distribution.xml
where distribution.xml and inventoryreport_kashif_dist.rdf are in same directory
but it returns the following errors
REP-34304: /d:/orawin90/reports/dtd/distribution.dtd (No such file or directory)
REP-34304: Distribution failed to complete; review the distribution lists
Any help would be appreciated
Regards,
Kashif

Hi jkathuria,
First you need to have manager_mailID in XML
In Bursting Tab
--> Enable Bursting
--> make Split By ID
--> make Delivery By manager_mailID
then in Query Builder
SELECT
DISTINCT ID Key,
'Template Name' TEMPLATE,
'RTF' TEMPLATE_FORMAT,
'en-US' LOCALE,
'PDF' OUTPUT_FORMAT,
'EMAIL' DEL_CHANNEL,
manager_mailID PARAMETER1,
'if u want cc to any other mail include here in singlequotes' PARAMETER2,(optional)
'[email protected]' PARAMETER3,
'Tax Invoice Report ' PARAMETER4,
'Please find the attachment for More Details.' PARAMETER5,
'true' PARAMETER6,
'' PARAMETER7
FROM
table name
this will work for u r Requirment.
cheers,
chintu

Distributi​on kit error

Similar Messages

Maybe you are looking for

Distribution kit error