Installation package from dist kit error: This installation package could not be opened by windows

Hi-
Can you please assist me with this error.  I have created a dist kit which installs correctly on my PC that has the development environment installed (CVI2012), but fails install on new PC running Win7 (no dev environment installed).  The error message is below.  Is sometimes will go through the whole installation but never installs it on the PC. Sometimes is will error out right away as in pic below.  Can you help?  I don't know if this is a Windows problem or an NI problem. 
Thanks-
Blue
Solved!
Go to Solution.
Attachments:
dist kit failure.JPG ‏117 KB

This error also occurs if the install package cannot be accessed properly (network connection, scratched disk, etc.) You could try copying the files directly to the computer to run the install or a new disc if it is scratched).
See example of this issue below for installing LabVIEW from DVD:
http://digital.ni.com/public.nsf/allkb/27BD42F4FDCBD4E7862576DD0057ADA5?OpenDocument
This might help eliminate issues other than the actual installer having an error.
- FCTesting

Similar Messages

  • Trying to update iTunes but keep getting the error messag "the url could not be opened" when it's always worked fine in the past. What does this mean?

    Trying to update my iTunes but keep getting the error message "the URL could not be opened" what does this mean and how do I resolve this? It's always worked fine in the past!

    Select a broken track and press ctrl-i to Get Info. Look on the summary tab for the location where iTunes "thinks" the file should be. Where is it really? Post back the two locations and I can suggest the best approach.
    tt2

  • My itunes app was working fine then all of a sudden I'm getting an error - The Itunes application could not be opened.  The required folder cannot be found.  But it doesn't tell me what folder.

    I am using Windows Vista.  My itunes launched fine until now.  Now I get an error - "The Itunes application could not be opened.  The required folder cannot be found".  I have no idea what file it is looking for.  Has anyone seen this error? 
    I have also tried to uninstall the package and I get the error Could not access network location %APPDATA%\.  And it won't uninstall.  I don't know why it's complaining in both cases. 
    Itunes was working 3 weeks ago with no problem.
    HELP!!! 

    hey did u ever get you itunes fixed?

  • TMS Error messgae: Source file could not be opened. Message: FTP Failed

    Can you please help me with this error ?
    I am trying to adjust the import queue on prod system, but I get this error:
    TMS Error messgae: Source file could not be opened. Message: FTP Failed
    SLOG:
    STOP  TRANSMIT BUFFER ENTR SID g 0000 20110720075455              ADMIN        ulvcp743p
    STOP  TRANSMIT BUFFER ENTR SID g 0000 20110720075809              ADMIN        ulvcp743p
    START TRANSMIT BUFFER ENTR SID g      20110720075812              ADMIN        ulvcp743p
    STOP  TRANSMIT BUFFER ENTR SID g 0000 20110720080133              ADMIN        ulvcp743p
    START TRANSMIT BUFFER ENTR SID g      20110720081655              ADMIN        ulvcp743p
    WARNING: /usr/sap/trans/tmp/SID.LOB is already in use (10), I'm waiting 2 sec (20110720081843). My name: pid 28901462 on ulvcp743p (SIDadm)
    WARNING: /usr/sap/trans/tmp/SID.LOB is already in use (20), I'm waiting 1 sec (20110720081918). My name: pid 28901462 on ulvcp743p (SIDadm)
    WARNING: /usr/sap/trans/tmp/SID.LOB is already in use (30), I'm waiting 5 sec (20110720081951). My name: pid 28901462 on ulvcp743p (SIDadm)
    ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
    STOP  TRANSMIT BUFFER ENTR SID g 0000 20110720082014              ADMIN        ulvcp743p
    ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
    ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18

    Hi ckary,
    Thanks for your post. It looks as if your computer is not seeing the driver
    calls and thus it gives the error saying it cannot complete that task. Does
    this happen with any other example programs you run using DAQmx? What version
    of DAQmx do you have? I would first recommend getting the latest DAQmx driver
    version, 8.7.1. You can find this at the following link below.
    Drivers and Updates
    Please post back if installing the latest driver does not
    fix the problem.
    Corby_B

  • Claims debacle (error) with Term Store: "Could not retrieve a valid windows identity" for all sites in a particular web app.

    When I pull up the Term store in CA or any MySite collection, it works.
    When I do so in any other site collection (HNSCs, incidentally), It doesn't return any term stores.
    My ULS log immediately before and after the "/_vti_bin/taxonomyinternalservice.json/CheckPermission" POST on termstore .aspx triggers the WCF call:
    Claims Authentication af30y Verbose Claims Windows Sign-In: Successfully signed-in the the user 'contoso\domainUser' for request url 'https://sp13-root-prd.contoso.com/_vti_bin/taxonomyinternalservice.json/CheckPermission'.
    Claims Authentication af30q Verbose Updating header 'LOGON_USER' with value '0#.w|contoso\domainUser' for the request url 'https://sp13-root-prd.contoso.com/_vti_bin/taxonomyinternalservice.json/CheckPermission'.
    Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|contoso\domainUser, ClaimsCount=77
    Logging Correlation Data xmnv Medium Site=/
    Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://CONTOSOFE3:32843/00e6d55691824965ac223f1d1cfae6d2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges2' MessageId: 'urn:uuid:590e916c-c89a-4f89-9819-a82c97fabcaa'
    Claims Authentication bz7l Medium SPSecurityContext: Could not retrieve a valid windows identity for username 'contoso\domainUser' with UPN '[email protected]'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: WTS0003: The caller is not authorized to access the service. (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.UnauthorizedAccessException: WTS0003: The caller is not authorized to access the service. at Microsoft.IdentityModel.WindowsTokenService.CallerSecurity.CheckCaller(WindowsIdentity callerIdentity) at Microsoft.IdentityModel.WindowsTokenService.S4UServiceContract.PerformLogon(Func`1 logonOperation, Int32 pid) at SyncInvokeUpnLogon(Object , Object[] , Object[] ) at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc) at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet))..
    Claims Authentication g220 Unexpected No windows identity for contoso\domainUser.
    The "The caller is not authorized to access the service." message seems pertinent.
    Both web apps are using only NTLM auth.
    The url for both web apps ends in the same contoso.com domain. 
    I get the same errors no matter what account I use, including the install account.
    Things I've tried:
    Deleting and building a new HNSC root web app and site. Error happens in all sites in all web apps except the PBSC hosting MySites.
    Giving the root site app pool identity full control of the metadata service app (even though the MySite identitiy doesn't have it)
    Giving the root site app pool identity full permissions on the metadata service app.
    Comparing database and web app config permissions between dev (where everything works perfectly) and prod (where it does not).
    Made sure IIS auth settings on both sites are identical
    Both sites are using the same SSL certificate (though the call to the web service appears to be http)
    Reprovisioned the metadata service app with a new database and new app pool identity.
    Made sure C2WT is running. Tried it with the service stopped as well.
    Web.configs are identical between working and non-working apps.
    I'm stumped but still Googling. I'm hoping to avoid having to call Micrososft. Any help would be appreciated!
    UPDATE:
    Interestingly, when I restored the web application from backup (via CA), I ended up with 3 identical "Windows Authentication" authentication providers assigned to the problem web app. Since there was more than one, I was directed to the provider-chooser
    page when visiting the site. Upon choosing 1 of the 3, I was authenticated, and *poof*, no more authentication errors and the term store loaded term sets as expected.
    Of course, 3 providers was not an ideal state, so I grabbed the one that worked (#1) via get-spauthenticationprovider, and assigned it to the web app via set-spwebapplication, and my problem returned.
    I am currently updating the farm to SP1 from June 2013 CU. Fingers crossed.
    Update:
    The update to SP1 went smoothly, but did not resolve the issue. Also related (I believe) are the random authentication errors when trying to upload images to some libraries, and 401-errors on the accessdenied.aspx page itself.
    Update:
    The problem is resolved, seemingly after making 4 changes. I'm trying to narrow down which change was the cure, if any:
    I installed SP1 on all 6 servers, rebooted and upgraded. This appeared to have no effect.
    Removed an old login from SQL that no longer existed in AD because of this ULS error:
    System.Runtime.InteropServices.COMException: The user or group contoso\svc_xxxxxxxxx' is unknown., StackTrace:    at Microsoft.SharePoint.Utilities.SPUtility.GetFullNameFromLoginEx(String loginName, Boolean&
    bIsDL)
    This login was the identity of the application pool that used to run the web app in question.
    This login was the schema owner of a schema named after itself on every SharePoint database so I changed the schema owner to dbo but left the schema attached.
    The problem may have surfaced initially when the app pool identity was changed in CA, but went unnoticed?
    Note that the web app had been deleted and recreated many times with a new identity and pool to no avail, but the URL remained the same throughout each attempted fix. Relevant?
    Grasping at straws, I changed the app pool identity for this web app to the same one that runs the MySite web app pool as per this only slightly related problem: http://www.planetsharepoint.org/m/preview.php?id=372&rid=34764&author=Vlad+Catrinescu
    I changed the authentication method from NTLM to Negotiate.
    I am rolling back #3 and #4 to see if the issue resurfaces.
    Update:
    It doesn't appear to have been the NTLM/Negotiate setting. Web app is currently set to NTLM and all is well. No strange accessdenies, and term Store is still manageable from all sites.
    Update: Sorry for the delay. I am administering 6 farms these days. Will update as soon as the final phase of rollbacks happens.
    I think I can. I think I can.

    maybe that web app was accidentally created with classic auth?
    here's an example of how to create claims based, with classic, and then "doing 2013" claims
    #Create the example web application, as mentioned above, either with gui, and pick later, or
    New-SPWebApplication-ApplicationPool$applicationPool-ApplicationPoolAccount$serviceAcct-Name$WebApp-Port
    5050
    -databaseName$contentDB-securesocketslayer
    #If doing for 2013
    New-SPWebApplication-ApplicationPool$applicationPool-ApplicationPoolAccount$serviceAcct-Name$WebApp-Port
    5050
    -AuthenticationProvider(new-spauthenticationprovider)
    -databaseName$contentDB-secureSocketsLayer

  • Photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

    frustrated! photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

    I haven't been able to try this fix, but someone emailed me the below fix:
    I had same problem.Elements13 would not open my new default printer, but worked ok on four other versions of Elements. No help from Adobe, after three days of searching & phoning adobe , I found out by:- Going into Elements 13, Press Edit button, down to "Preferences and across to general. Press the "Reset Preferences on next launch". I then suggest you go through each section to make sure that your chosen preference are still ticked/checked in.
    It worked for me. Hope same for you.
    I'm planning on trying this fix soon.  Let me know how it goes for you if you get to try it before me.  Will do the same.  Thanks,
    Chad

  • When I go into outlook I and hit a new message and hit th "To" button, I get the following error message:  The address list cannot be displayed.  The contacts folder associated with this address list could not be opened; it may have been moved or deleted,

    to continue:  For information on how to remove this folder from the Outlook Address book, see MSOffice Outlook help.  I also get an error message when I go to tools and hit the address book there.  This crap is frustrating!

    Hi,
    Based on your description, I suspect that your proxy is in internet zone by default, so it cannot use credential
    which has been recorded in window credential management. I suggest that we add
    proxy server into “Local Intranet” zone via GPO to see if it can solve your problem.
    Let me know if it works for you. Thank you.

  • This instillation packet could not be opened...

    Its says verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package.
    Help, please and thank you!!

    This could be a variant of the problem in this article;
    http://docs.info.apple.com/article.html?artnum=304405
    If that's not it, do you have another account with adminstrator access that you can try installing from.

  • Error message "The URL could not be opened" comes up when trying to update iTunes

    iTunes needs an update, but Internet Explorer does not open the URL. A browser window opens, the computer is online yet the URL will not open.

    Did you repair permissions?

  • I-tunes won't download onto Windows XP.  Error message 'this application package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this a a valid window Installation package'.

    How do you download i-tunes onto Windows XP when error message occurs, 'This application pack could not be opened. Verify that hte package exists and that you can access it, or contact the application vendor to verify that this is a valid window installation package'.

    I wish I knew because i'm having the same problem. As soon as I find the answer I will post.

  • Can't enroll device for user and this user account is not authorized to use Windows Intune.

    Hello,
    We have SCCM 2012 R2 inegrated with intune via an intune subscription. When I enroll a device with my admin account there are no problems, but when I want to add it with another user account which is a member of the Intune users collection, it can't be enrolled.
    When I tested on https://portal.manage.microsoft.com with the credentials of the user I couldn't connect and received the following error: This user account is not authorized to use Windows Intune.
    Do I have to do anything in the https://accounts.manage.microsoft.com as there is a checkbox saying Windows Intune. this is unchecked now for all the users even my own account on which I'm able to enroll a device.
    Or is this a license problem? I know configuration Manager uses licenses for Intune but where can we track how many licenses are used and how many available? Is there some kind of report available?
    I hope someone can help me
    Kind regards,
    Robben

    I added them yesterday and this morning I was still not able to enroll a device with the added user his credentials.
    The UPN is correct. Maybe I need to force the DirSync then? Or will one day of waiting be enough normally?
    I can see the user in the intune management portal. Does this means it has been synced?
    Another thing I noticed is the cloudusersync.log doesn't show them being added? What I was thinking is I first used the all Users collection in the subscription and afterwards I changed it to a specific collection with only the test users. Could it be that
    they all synced already and the log doesn't show them anymore?
    A warning in this log shows this also:
    WARNING: Failed to get lsu url. default release one will be used. exception = System.NullReferenceException: Object reference not set to an instance of an object.~~   at Microsoft.ConfigurationManager.DmpConnector.UserSync.CloudUserUpload..ctor()  
     SMS_CLOUD_USERSYNC    23/04/2014 15:02:18    7684 (0x1E04)
    I don't know if that has anything to do with this?
    this is an extract of that log:
    CCloudUserSync::Process - User sync processing thread is now stopping.    SMS_CLOUD_USERSYNC    23/04/2014 14:59:42    8144 (0x1FD0)
    SMS_EXECUTIVE started SMS_CLOUD_USERSYNC as thread ID 7684 (0x1E04).    SMS_CLOUD_USERSYNC    23/04/2014 15:02:15    7572 (0x1D94)
    CCloudUserSync::Process - User sync processing has started.    SMS_CLOUD_USERSYNC    23/04/2014 15:02:15    7684 (0x1E04)
    Starting user sync ...    SMS_CLOUD_USERSYNC    23/04/2014 15:02:15    7684 (0x1E04)
    WARNING: Failed to get lsu url. default release one will be used. exception = System.NullReferenceException: Object reference not set to an instance of an object.~~   at Microsoft.ConfigurationManager.DmpConnector.UserSync.CloudUserUpload..ctor()  
     SMS_CLOUD_USERSYNC    23/04/2014 15:02:18    7684 (0x1E04)
    Starting user delta sync, raise failure status messages = True    SMS_CLOUD_USERSYNC    23/04/2014 15:02:18    7684 (0x1E04)
    Total received users from SCCM to be removed from cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:02:19    7684 (0x1E04)
    Successfully removed users from cloud 0    SMS_CLOUD_USERSYNC    23/04/2014 15:02:19    7684 (0x1E04)
    Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:02:19    7684 (0x1E04)
    UserDeltaSync:- Users Added = 0, Users Removed = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:02:19    7684 (0x1E04)
    Starting user delta sync, raise failure status messages = True    SMS_CLOUD_USERSYNC    23/04/2014 15:07:19    7684 (0x1E04)
    Total received users from SCCM to be removed from cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:07:19    7684 (0x1E04)
    Successfully removed users from cloud 0    SMS_CLOUD_USERSYNC    23/04/2014 15:07:19    7684 (0x1E04)
    Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:07:19    7684 (0x1E04)
    UserDeltaSync:- Users Added = 0, Users Removed = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:07:19    7684 (0x1E04)
    Starting user delta sync, raise failure status messages = True    SMS_CLOUD_USERSYNC    23/04/2014 15:12:19    7684 (0x1E04)
    Total received users from SCCM to be removed from cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:12:19    7684 (0x1E04)
    Successfully removed users from cloud 0    SMS_CLOUD_USERSYNC    23/04/2014 15:12:19    7684 (0x1E04)
    Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:12:19    7684 (0x1E04)
    UserDeltaSync:- Users Added = 0, Users Removed = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:12:19    7684 (0x1E04)
    Starting user delta sync, raise failure status messages = True    SMS_CLOUD_USERSYNC    23/04/2014 15:17:19    7684 (0x1E04)
    Total received users from SCCM to be removed from cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:17:19    7684 (0x1E04)
    Successfully removed users from cloud 0    SMS_CLOUD_USERSYNC    23/04/2014 15:17:19    7684 (0x1E04)
    Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:17:19    7684 (0x1E04)
    UserDeltaSync:- Users Added = 0, Users Removed = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:17:19    7684 (0x1E04)
    Starting user delta sync, raise failure status messages = True    SMS_CLOUD_USERSYNC    23/04/2014 15:22:19    7684 (0x1E04)
    Total received users from SCCM to be removed from cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:22:19    7684 (0x1E04)
    Successfully removed users from cloud 0    SMS_CLOUD_USERSYNC    23/04/2014 15:22:19    7684 (0x1E04)
    Total received users to add from SCCM = 0, Total Successfully added users to Cloud = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:22:20    7684 (0x1E04)
    UserDeltaSync:- Users Added = 0, Users Removed = 0    SMS_CLOUD_USERSYNC    23/04/2014 15:22:20    7684 (0x1E04)
    kind regards,
    Robben

  • The iTunes application could not be opened. An unknown error occurred -58

    When opening iTunes I get this error
    "The iTunes application could not be opened. An unknown error occurred -58"

    I've got a similar problem when trying to open itunes on my laptop with vista - the message is: The iTunes application could not be opened. An unknown error occurred (-50). Help!!

  • The itunes application could not be opened. an unknown error occurred (1301

    I launched iTunes 9.0.1 today and got this error:
    "The itunes application could not be opened. an unknown error occurred (13014)"
    An archived tip on the iTunes for Windows forum that suggested deleting the iTunes Library Genius.itdb. That didn't work, I also had to delete iTunes Library Extras.itdb. (For the record I renamed them instead of deleting, but the original post suggested deleting).
    Anyway, I thought I'd pass that on in case anyone else experiences this problem.

    I had the same error and I keep my iTune folder on an external drive due to size. I tried to create a sub-folder to temporarirly hold the itdb file(s) and give it a try. The system wouldn't let me create the folder, at which point I remembered I had left my mac on but unplugged to find the battery drained in the morning. Upon plugging it in, it came back but then told me I hadn't exjected my external disk. So, I figured there might be a correlation. I tried to eject the disk and it wouldn't let me though no programs were running. So, I went ahead an chose to "Force" the eject via the option it presented me. On the un/re-plugging the disk, I tried to created a subfolder and it worked. Before moving any files to it, I tried starting iTunes again and voila, it worked. So, I suspect the comment above about files being locked is what bit me. Hope this helps...

  • Error ordinal 459 could not be opened. error occurs on every plug in install

    I keep getting the error message "ordinal 459 could not be opened" when trying to update flash player or installing any plugin. I have tried every solution that I have read and nothing works.

    Try this Microsoft suggestion: [http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/the-ordinal-459-could-not-be-located-in-the/d93d1cdf-763b-4403-bcc8-ca06d16f4f4a]

  • Codec could not be opened error in red

    Out of the blue, suddenly the screen went completely green during playback but an error message said codec could not be opened. The error message had a red background. Have audio but no picture. It just stays green. At first i was thinking perhaps it was a bad chroma key becasue I am using green screen clips (Music video) but I'm all thumbs as far as codecs go. i see there's many other posts about this but their solutions so far haven't applied to me. I'm using Final Cut 7.0.3, running OS 10.6.8 on a 2 x 3.2 ghz Quad-Core Intel, 16 gigs of ram. been fine but just suddenly conked out. Any help would be greatly appreciated.

    Have you done any software or OS updates?  What format are you working with?  There have been many reports of this sort of thing happening recently after people have done a software update.  Do some searching here and you'll find many posts and a few possible solutions.

Maybe you are looking for