Distribution Monitor for 2 different servers from 2 different sites
Hello all,
We are trying to use Distribution Monitor during a parallel Unicode Conversion on a SAP 4.7 system.
The source system and target system are 2 different servers located on 2 different sites (more than 500Kms distant).
Questions:
1. Can we use Distribution Monitor with 1 source server dedicated for the Export and 1 target server dedicated for the import of a package?
2. If it is not possible, what are the constraints in fact?
3. Can we have a scenario where Distribution Monitor is used on the source system in order to use the parallelism benefit and Migration Monitor used on the target system?
Thanks for your help & feedback,
Chris
Hi Chris,
1. Can we use Distribution Monitor with 1 source server dedicated for the Export and 1 target server dedicated for the import of a package? The Answer is No
In order to use Distribution monitor, u need minimum two application servers on source systems and correspondingly atleast minimum two application servers on target system
For example let us say Application server A and Application server B on sources systems and Application Server C and Application server D on target ytem
Then configure Distribution monitor properties to include two application servers as source systems and two application servers as target systems. When u exeute distribution monitor preparation, first it scan database servers in source system nd target system and then scan CI servers in source and target system. Then Packages will be distributed in two application servers A and B
Run Export from Application server A for first fifty packages , at the same time Run import these first fifty packages in Application Server C
Run Export from Application Server B for other remining packages and at the same time , run import the remaining packages into Application Server D.
(that is one to one correspondence)
2. If it is not possible, what are the constraints in fact? - There is no constraints. However there is lots of time consuming during Distribution monitor preparation and checking.
3. Can we have a scenario where Distribution Monitor is used on the source system in order to use the parallelism benefit and Migration Monitor used on the target system? - The Answer is No.
You cannot mix distribution monitor tool for source system and Migration tool used on target system.
You have to use any one tool depending on the size of database used.
if your database size used is very very large then recommend to use distribution monitor where u in sou can have multiple R3load jobs in each application server. Say Application server A use 20 R3load jobs and Application server B use 15 r3load jobs).
Thanks
APR
Similar Messages
-
This workflow cannot be imported because it was created in SharePoint Designer for a different Site
Hello everyone. I am getting this error when attempting to move minor workflow changes from mirror SharePoint development / production environments and hoping someone can help me.
"This workflow cannot be imported because it was created in SharePoint Designer for a different site, or the original workflow has been moved or deleted. To move a workflow between sites, use Save as Template (.wsp file) instead of a Visio workflow
drawing."
So basically I have taken an image of our single SharePoint server, Domain Controller, and a client and restored them to an OFFLINE development environment for the testing of workflow changes prior to production. I've put quite a bit of time into one
particularly and would like to export/import rather than re-created from scratch.
I've successfully created the form template and imported. This created the necessary list items nicely and the form appears to work as expected. However, when attempting to import the .VWI file exported from dev SharePoint, I am getting the above
error. If I change the .VWI to .zip and remove the "workflow.xoml.wfconfig.xml" file, then re-zip and change the file extension back to .VWI I get a dialog that allows me to import, but I have to choose a new name and much of the related content
is lost. I need to be able to overwrite/merge the existing workflow with the import. Any suggestions?
One strange thing I ran into was during a test of an export/import from and to the exact same environment. If I simply export to .VWI, then import from .VWI with no changes, SAME everything I still get this error. Very weird. Hoping someone can shed some
light on the subject. Thank you.
Adam TylerHi Adam,
Here is a blog talk about the same issue would be helpful:
http://techiescode.blogspot.com/2014/09/copymove-sharepoint-2010-designer.html
Best Regards
Dennis Guo
TechNet Community Support -
Can I use a domain for one site and mobile me for a different site?
Can I use a domain for one site and mobile me for a different site?
I have two sites, I would like to have up and I would like to do one through a domain and one through mobileme is this possible?Yes you can. You can use the CNAME method of forwarding for the first site (the top site in iWeb) and use the MMe URL for your account for the other site: http://web.me.com/YourAccount_Name/SiteName/
OT -
Regarding Distribution Monitor for export/import
Hi,
We are planning to migrate the 1.2TB of database from Oracle 10.2g to MaxDB7.7 . We are currently testing the database migration on test system for 1.2TB of data. First we tried with just simple export/import i.e. without distribution monitor we were able to export the database in 16hrs but import was running for more than 88hrs so we aborted the import process. And later we found that we can use distribution monitor and distribute the export/import load on multiple systems so that import will get complete within resonable time. We used 2 application server for export /import but export completed within 14hrs but here again import was running more than 80hrs so we aborted the import process. We also done table splitting for big tables but no luck. And 8 parallel process was running on each servers i.e. one CI and 2 App servers. We followed the document DistributionMonitorUserGuide from SAP. I observerd that on central system CPU and Memory was utilizing above 94%. But on 2 application server which we added on that servers the CPU and Memory utilization was very low i.e. 10%. Please find the system configuration as below,
Central Instance - 8CPU (550Mhz) 32GB RAM
App Server1 - 8CPU (550Mhz) 16GB RAM
App Server2 - 8CPU (550Mhz) 16GB RAM
And also when i used top unix command on APP servers i was able to see only one R3load process to be in run state and all other 7 R3load process was in sleep state. But on central instance all 8 R3load process was in run state. I think as on APP servers all the 8 R3load process was not running add a time that could be the reason for very slow import.
Please can someone let me know how to improve the import time. And also if someone has done the database migration from Oracle 10.2g to MaxDB if they can tell how they had done the database migration will be helpful. And also if any specific document availble for database migration from Oracle to MaxDB will be helpful.
Thanks,
Narendra> And also when i used top unix command on APP servers i was able to see only one R3load process to be in run state and all other 7 R3load process was in sleep state. But on central instance all 8 R3load process was in run state. I think as on APP servers all the 8 R3load process was not running add a time that could be the reason for very slow import.
> Please can someone let me know how to improve the import time.
R3load connects directly to the database and loads the data. The quesiton is here: how is your database configured (in sense of caches and memory)?
> And also if someone has done the database migration from Oracle 10.2g to MaxDB if they can tell how they had done the database migration will be helpful. And also if any specific document availble for database migration from Oracle to MaxDB will be helpful.
There are no such documents available since the process of migration to another database is called "heterogeneous system copy". This process requires a certified migration consultant ot be on-site to do/assist the migraiton. Those consultants are trained specially for certain databases and know tips and tricks how to improve the migration time.
See
http://service.sap.com/osdbmigration
--> FAQ
For MaxDB there's a special service available, see
Note 715701 - Migration to SAP DB/MaxDB
Markus -
Powershell script for removing some users from a particular Site Collection
Hi,
I am looking for a PowerShell script to delete a few users from a particular Site Collection. I am unable to delete them from/_catalogs/Users/simple.aspx page therefore need some other medium to
delete users from the site collection.
My ultimate aim is to have no user profile with "tp_deleted" field's value as 0 in the USERINFO table. Currently there are about 40 odd users with this field's value as 0 and this is affecting my crawling of this content database.Thanks for the reply Alex & eHaze,
I have a content source of root site which crawls all the site collections under it. Out of the 9 site collections, only 8 are getting crawled and 1 doesn't get crawled at all. The error in the crawl logs is
The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site: Value does not fall within the expected range. )
I tried a lot of things, searched over the net and finally found
this which helped me solve the same issue in my development environment. I deleted these users from userInfo table and ran a full crawl. And the issue was fixed.
Now since I cannot delete the users from userInfo table directly from PROD environment, I used .../_catalogs/Users/simple.aspx list
to delete users from this site collection. While some of the users I could delete, quite a few I could not. Clicking on the profile redirected me to the home page rather than the info page of the profile.
This
is why I have to delete these users from the site collection.
Alex - the link you shared, I guess it is for a web application level.
eHaze - the script you shared throws this error:
Get-SPSite : Cannot find an SPSite object with Id or Url: http://dev-apps/divisions/BT. At C:\PowerShell Scripts\DeleteUserFromSiteCollection1.ps1:4 char:19
+ $site = get-spsite <<<< $siteURL
+ CategoryInfo : InvalidData: (Microsoft.Share...SPCmdletGetSite:
SPCmdletGetSite) [Get-SPSite], SPCmdletPipeBindException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletGetSite
You cannot call a method on a null-valued expression.
At C:\PowerShell Scripts\DeleteUserFromSiteCollection1.ps1:9 char:27
+ $site.SiteUsers.Remove <<<< ($LoginName)
+ CategoryInfo : InvalidOperation: (Remove:String) [], RuntimeExc
eption
+ FullyQualifiedErrorId : InvokeMethodOnNull
hope this info helps. -
Using iWeb for 2 different sites...
Hello all~
I am tinkering around with iweb today. Just updated my .mac site and am considering creating a site as I have personal webspace provided through my ISP.
My problem is... I can't figure out how to create 2 totally different websites with iweb. Each time I try, both sets of info goes to one site or the other.
Any suggestions???This is what I've experienced...
When you choose "Publish to a Folder" it asks you for a URL. This means that only one of your sites can have an RSS feed, to my understanding.
I actually have 5 sites, but only one that I know will have a working RSS feed.
When you publish, it does a good job of separating the files by site name.
If you publish to a folder on your ddesktops called "Websites" it will look like this:
Websites> (will contain a index.html which references the one you typed in) and Two folders:
Site 1 Folder> (will contain another index.html file and the rest of the sites html pages and page files).
Site 2 Folder> (will contain another index.html file and the rest of the sites html pages and page files).
So it can be done, but only the site whose name you type in when you publish will have the RSS feed capabilities.
Hope this helps. -
I can access the feature from the Norton interface, but that doesn't make the passwords and user names fill in.
Maybe extension are broken? Norton community can assist you further.:)
* community.norton.com -
Distribution Monitor import steps!
Hi ,
Below are the doubts what I have for Distmon.
1. DBSIZE.xml file is created in distmon dir where the preperation was run. Should we copy the same to install the target system to be issued in sapinst.
2. One of the package sapappl1 has become very big can we split the package, if yes how do we do that.
3. the DB dir and the dbsize.xml file is not available or not created in SapinstImport dir. should we creat the dir and mv dbsize.xml there.?
4. I have given 30 jobs, but the hardware utilization on both apps and db server was not more than 15%. but still the export of some of the bigger split tables took time. in the time file it gives abt 5 MB/min export time. what can be culprit here? is it hard disk or n/w ? or something else. We have collected the statistics before export.
Regards,
Ravi> when a install the system through sapinst and arrive to the phase when sapinst asks me to use distribution monitor for import, i have the problem.
> When I try to import with DM i have the ORA-1017
> R3load -testconnect I
Check
Note 400241 - Problems with ops$ or sapr3 connect to Oracle
Markus -
Distribution monitor import phase
Hello
I'm doing an unicode conversion in a EHP4 701 .
I did the export through distribution monitor without problem.
when a install the system through sapinst and arrive to the phase when sapinst asks me to use distribution monitor for import, i have the problem.
When I try to import with DM i have the ORA-1017
R3load -testconnect I
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1017
DbSl Trace: CONNECT failed with sql error '1017'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1017
DbSl Trace: CONNECT failed with sql error '1017'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1017
DbSl Trace: CONNECT failed with sql error '1017'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1017
DbSl Trace: CONNECT failed with sql error '1017'
(DB) ERROR: DbSlErrorMsg rc = 99
R3load: job finished with 1 error(s)
R3load: END OF LOG: 20091201151546
I don't know how to solve the problem...
let me know if you have some idea
thanks
Nick> when a install the system through sapinst and arrive to the phase when sapinst asks me to use distribution monitor for import, i have the problem.
> When I try to import with DM i have the ORA-1017
> R3load -testconnect I
Check
Note 400241 - Problems with ops$ or sapr3 connect to Oracle
Markus -
Voice over monitor for FCPX sounds awful
I'm trying to voice over a project right now and the monitor for the input out from FCPX sounds like it has an echo and makes your voice sound higher pitched. Is there any one else out there having the same problem? Its really annoying and my VO talent doesn't want to listen to his voice sounding like that for an hour and a half.
First, you don't really have to monitor yourself while recording. I never do. Second, you have to use headphones, or your mic will pick up the audio monitors and feedback. Here are three articles to help out.
Covers hardware & software setups, recording techniques, etc.
http://www.fcproxuniversity.com/FCPro_X_University/Blog_Archive/Entries/2011/9/2 2_Voice_Over_Work_In_Final_Cut_Pro_X.0.1_2_%28and_some_recording_tricks%29update d_11_11_12.html
Covers editing short VO work.
http://www.macprovideo.com/hub/final-cut/fcp-x-voice-over-editing-short-takes
Covers editing long VO work.
http://www.macprovideo.com/hub/final-cut/fcp-x-voice-over-editing-long-projects -
Exchange server 2010 redundancy using static IPs in different sites
Dear All;
We are facing a problem in Exchange server 2010 which is that we need to provide redundancy for two different sites which contain the same exchange databases using DAG but the issue is that if the main exchange server fails, users from the internet will
not be able to access the server because the main static IP is in the main site ...
========================================
My question is how to provide redundancy using two Global IPs in two different sites, and is there any consequences of doing such a setup?
========================================Hi,
From your description, I would like to clarify the following things:
1. It is recommended to configure the IP Configuration for both the MAPI and Replication NIC on DAG nodes.
2. A site failure is managed differently from the types of failures that can cause a server or database failover. A site failure is considered to be a disaster recovery event, recovery should be manually performed and completed for the client service to
be restored and for the outage to end.
For more information, here is an article for your reference.
Switchovers and Failovers
http://technet.microsoft.com/en-us/library/dd298067(v=exchg.141).aspx
Besides, what do you mean by "global IPs"?
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support -
Time sync monitor for all windows member servers
How to monitor time sync issue on all the member servers and domain controllers. Can we monitor through scom 2007 r2. Specially we need an alert when all the member servers are not in time sync.
B JohnThere is no monitor for exactly your ask.
The AD management pack includes a Time Service Health monitor for DCs that makes sure the time service is running:
http://social.technet.microsoft.com/Forums/en-US/0c921fa7-45ed-4bee-8f53-c92c750f6cbf/scom-module-for-monitoring-time-sync-issues?forum=operationsmanagergeneral
Here is my "domain time tip:"
Select your preferred time server from this list
http://tycho.usno.navy.mil/NTP/. For example 'tick.usno.navy.mil'.
Then run these commands on your PDC emulator of the domain:
W32tm /config /syncfromflags:manual /manualpeerlist:"<DNS-name-of-time-server>"
W32tm /config /reliable:yes
W32tm /config /update
W32tm /resync
Net stop w32time
Net start w32time
If you execute these commands, AD defaults will cause all your member servers to discover the domain time standard and update to it.
Good luck,
John Joyner MVP-SC-CDM -
Disable SQL Monitoring for few servers
Hi Team,
I need to disable complete SQL Monitoring from all SQL servers except for a couple of servers.
For this I disabled the discovery "SQL Server Installation Seed" that is targeted on "Windows Server" class. Even after applying this override, I see that my objects are discovered in SQL server classes and I still get SQL server alerts
for all the SQL servers.
I am running SCOM 2012 SP1, so do I need to run "Remove-SCOMDisabledClassInstance"?
Also am I disabling the discovery for the correct class "Installation Seed"?
Thanks,
S K AgrawalHi Faizan,
Suppose you want to disable monitoring for a particular set of SQL servers. Here are the steps to be followed -
1) Create a group of these SQL servers.
2) Considering these are SQL server 2008, go to Authoring--> Object Discoveries.
3) Then disable the discovery for "Installation seed" class because that is targeted on "windows Server" class and is the base class for all other SQL Classes. You can do this by creating an override and disabling the discovery for the group created in Step
1.
4) Open a Operations Manager PowerShell window and run "Remove-SCOMDisabledClassInstance". You might get some error about RuleID and ObjectID. Don't worry about that and keep running "Remove-SCOMDisabledClassInstance" a few more times, finally you will get
a message of command completed successfully.
5) Then to confirm that discovery has been disabled, wait for few minutes and then go to Monitoring--> Discovered Inventory and change the target type to any of the SQL server 2008 class. You will not find the SQL servers from the group in the discovered
inventory.
To Re-enable the SQL monitoring, just remove the override MP or go to "installation seed" class for SQL server 2008. Open Override Summary, Click on Edit, and Remove the override where you have disabled the discovery.
I hope this helps.
Please mark this as Answer if this helped you. -
I am trying to store music for two different iPods on the same Windows 8 computer, and when I try and download content from the Cloud I get an error message. Is it possible to have two different Apple IDs on the same computer?
Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library. -
Multi gesture for browsers different from safari
Multi gesture for browsers different from safari, for example right to left scroll to previous page. How to set it like in Snow Leopard?
THe only gesture to change tabs is to tap the tab in the address bar. You can go back a page in a website by holding one finger on the left side of the screen and swiping right. You can go back to a previous app by placing four fingers on the right side of the screen and swiping left.
Maybe you are looking for
-
HT202213 home sharing with multiple itunes accounts
In our household we have three seperate itunes accounts (Husband) (Wife) (Kids). We each have our own user on the Home PC (Win XP) and we each have a laptops (3 Win-8). Then we have multiple apple devices (3) iPhones, (4) iPods, (2) iPod touch, (2)
-
hi, i have developed a application with swing concept and mysql as my database... now i am trying to create jar file for my application... in the manifest file i have given like this: class-path: C:\Program Files\MySQL\mysql-connector-java-5.0.4-bin.
-
IMac can't running any two fire wire hard disks at the same time . which
iMac can't running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no prob
-
While updating my iTunes this message came up "Service 'apple mobile device' (apple mobile device) failed to start. Verify that you have sufficient privileges to start system services" what can I do to get my iTunes to work again?
-
I keep getting this error every time i try to create a queue table exec sys.dbms_aqadm.create_queue_table('call_mqtab','call_t'); at line 1: 4068: existing state of packages has been discarded 4063: package body "SYS.DBMS_AQADM" has errors 6508: PL/S