Distribution of unplanned delivery costs during delivery cost LIV

Hi all,
This clarification is regarding delivery cost LIV - where difference between:
- the amount invoiced by the freight vendor
and
- the amount accrued based on PO
is treated as unplanned delivery cost and is intended to be distributed amongst the line items of the accrued planned delivery cost.
Customizing for the company code - Configure How Unplanned Delivery Costs Are Posted - is set as "Distribute among invoice items".
When we try to post an LIV in regard to the aforesaid scenario [Tax code is with 0% tax], the system returns the following error message:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Balance is not equal to zero: 58.42 EUR
    Message no. M8186
Diagnosis
    You cannot post the document as the balance is 58.42 EUR.
Procedure
    Check the gross invoice amount, the tax amount, the amounts in the items
    selected and any unplanned delivery costs in the document header. The
    items selected on the item list may not be the same as those in the
    invoice.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Also, went through the OSS note 129066 which mentions that Unplanned delivery costs cannot be distributed to the planned delivery costs as of SAP release 4.6C.
Our system is SAP 4.7 and hence we are unable to understand the reason for this error..
Is there any enhancement relevant in this regard?
Can anyone please throw some light on this.
Best Regards,
Bhargav

Thank you for contacting SAP Global Support Center.
It seems you're posting the planned and unplanned delivery cost
simultaneously.
The planned delivery cost and unplanned delivery cost cannot be invoicedtogether when only freight cost is being invoiced.
Unplanned delivery cost and planned delivery cost can be invoiced
together only when you invoice both goods and freight cost.
This is the standard design of the system. Even in customizing for
unplanned delivery cost, the system behavior is designed such a way thatit can be invoiced along with goods only. Both options which we have
given behave similarly except for the posting to account.
Therefore, your system behavior is as per standard design and there
is no error in your system. For this functionality there are no other
workarounds too.
Additionally, Please consider if the workaround below is working.
In order to post unplanned delivery costs with planned delivery costs
the customizing has to be set so that the unplanned delivery costs are
posted to a seperate G/L account rather than distributed amongs line
items.
SPRO
>>Materials Management
>>Logistics Invoice Verification
>>Incoming Invoice
>>Configure How Unplanned Delivery Costs Are Posted
"2" Different G/L line
May I ask you to review note 129066. The the validity is from 4.0 to
4.6 C but it is valid for your release also.

Similar Messages

Match the COGS during delivery and Cost during Billing

Hi All
We have a Kit Scenario with below parameters
Sales BOM is created
Header Material is Valuated but non-inventorised
Component Material is Valuated and inventorised
In Sales order, Pricing is done at the header material not at the components level
During delivery components are consumed..
During Billing we get only the Cost for the header material (cost coming from Header material master standard price) as billing i sodne only at header
The cost estimate will be run to roll up the component cost to header material standard price.
We need to check if COPA consumption (Header Cost) match with FI consumption (inventory balance for component consumption) every month end. We need to get the actual COGS during delivery in the COPA document during billing.
This is a concern if component is changed during delivery then we will not be able to reconcile FI and CO during month end. We were thinking of creating a new statistical value field to capture this.
Thanks in adavnce for the help
Regards
Neeraj

Looks like you want to pass the cost of header item as well as components (in a separate value field) to COPA. I suppose you are looking to consolidate the cost of components in one value field.
Verify whether using exit COPA0001 you get an access to reference delivery document and item against which the billing document is getting created. You can then update the total cost of delivery document item and update it in this separate value field.
Regards
Subodh

Delivery costs with shipment costs

Dear Sir,
I want to capture the delivery costs from shipment cost document.
I did all bellow mentioned settings:
For freight cost to be transfered as delivery cost, the Purchase order need to have a freight condition with zero value. Also the freight condition need to have indicator set in config for 'copy shipment cost'. Once this is set up and shipment cost document created, do PGI and it should create a DCGR document in PO History.
Even after all these settings, i tried but no result. It is not creating ths DCGR in PO History.
Can any body tell me this bellow setting: Where is this exactly. I tried no field with the name Relevant for costing
Shipment cost item categories Under the Shipment cost types and item categories activity, set the Relevant for costing field to A = Relevant for calculating delivery costs (Delivery costs). This results in the shipment costs not being transferred directly into accounting. The accounting is done via the purchasing functionality for delivery costs.
Can any body give me the solution?
With regards
Lakshmikanth

Hi
I think that you have had your question answered so if you are happy with this can you please award points if you want to but mainly can you please mark your question as answered so that it is easier to navigate around the open questions in the forum as the number of pages are growing and growing and it takes too long to go through everything especially if a satisfactory answer has already been given and people like me who want to help will give up and so some people may not get any help.
Thanks for this
Frenchy.

Item Cost at Delivery

The DLN1 table stores the item cost at delivery. Where is this value from? When i drill into the item on the delivery and review the production order that this product came from the cost booked at production is different than the cost booked at delivery. why the variance?
Secondly, there have been no inventory evaluations for the finished good between production and delivery.
Key question is where is the DLN1.Stockprice value pulled from?

As requested:
7/20/2009     7/20/2009     SI 15011     2400     10     144.658     1,446.58
7/22/2009     7/22/2009     DN 28825     2400     -1     143.367     -143.37
7/28/2009     7/28/2009     DN 29043     2400     -1     143.367     -143.37
8/5/2009     8/5/2009     SI 15327     2400     10     144.268     1,442.68
8/11/2009     8/11/2009     RE 2776     2400     1     143.625     143.62
8/20/2009     8/20/2009     RE 2815     2400     1     143.624     143.62
8/26/2009     8/26/2009     DN 29907     2400     -1     143.624     -143.62
8/27/2009     8/27/2009     DN 29977     2400     -1     143.624     -143.62
8/31/2009     8/31/2009     DN 30116     2400     -1     143.625     -143.62
9/1/2009     9/1/2009     DN 30157     2400     -2     143.625     -287.25
9/10/2009     9/10/2009     DN 30453     2400     -2     143.625     -287.25
9/21/2009     9/21/2009     DN 30755     2400     -2     143.625     -287.25
9/21/2009     9/21/2009     DN 30797     2400     -1     143.625     -143.62
9/28/2009     9/28/2009     DN 31038     2400     -10     143.625     -1,436.25
10/2/2009     10/2/2009     DN 31246     2400     -1     143.625     -143.62
10/5/2009     10/5/2009     DN 31290     2400     -1     143.625     -143.63
Doesn't look like the deliveries (DN xxxx) uses the actual cost, not sure where the delivery is pulling its values. This is a problem. The product that shipped on DN 31290 (10/5/09) was built on 7/20/09.
Edited by: Rich b. on Nov 17, 2009 9:33 PM

Error in Shipment Cost document(Delivery date is in past)

Dear All,
While iam trying to save the shipment cost document, i am getting error like Delivery Date is in past. Due to this error iam unable to generate the P.O in back ground. We are creating the shipment Cost for the S.T.O process.
I want to know system is considering which delivery date in shipment cost.
Regards
Sunil

Hi
Can you provide few details like.....
what are all preceeding steps you completed before shipment cost Processing
whether you restricted only backward scheduling?
Generally backward scheduling checks whether the delivery date is in past or not?
Thanks & Regards
Bhaskar

Configurable material sales order costing after delivery is created

Hi,
Sales order was re-costed after delivery and goods issued.
The costing is VO - without errors.
The profitability analysis does not show cost for the sales order line and there is no offset g/l account .
Please see attached.
Appreciate it.

Hi,
Check in KVBI if the costs have accumulated on the sales order.
If there is no credit line, it means GR for production was at zero value.
And AFAIK delivery will not be permitted unless costing is done for a configurable material's sales order. So I am surprised how you were able to execute delivery.
Also, at what point is your COPA document generated in the screenshot?
Br
Abhi

Put these costs of delivery into the SAP system

Hello,
After a delivery is done we receive an invoice from the carrier. So far we are doing the correlation between the costs of the delivery and the delivery note itself manually on an excel sheet. What we would like to do is to put these costs into the SAP system and they should be able to be monitored afterwards ( per query for example ). Do you have any idea or recommondation how to do this?
Many Thanks
Jean

Hello Jean,
Designing a Z table is very easy, you would first figure out all the important fields you would want to maintain in SAP.
Then you would be giving those fields to your ABAPer, who first creates the table with all the important fields you need.
Once that is done you could again take the help of ABAPer to develop a program which when run would load the flat file from the carrier system and update this fields.You can automate this Program by creating a JOB.
Once the table is defined you could have this custom fields to be populated in Sales Order (example you could use Additional data A or B tab in Sales Order header or in Delivery Header and place your custom made fields in it.)
So that once the job is run it would populate the tables and also you would have this data in sales documents.
Once you have the data in SAP its very easy for you to run the query.
HOpe this helps.
Thanks
Murtuza

Re: Freight Cost during MIRO

Dear All,
Need help...I configured the following steps in order to capture freight cost during MIRO. but during MIRO,
the GL account captured/defaulted to freight cost is same as the expense accnt instead of the freight cost account..
eg. Expense -1111
      Freight   -2222
      Vendor - 3333
Created 1 PO and maintain the ff:
PO is 1 line item 1pc=1000
ZFR1 - Condition type for Freight cost = 200
At the time of MIRO ( we dont have GR processing),the screen display 2 line item for the expense and freight cost but the GL account defaulted in the freight cost is same as expense account instead of the freight account. then if do a simulate, the following are the entry (which is wrong)
Vendor   1111                 1200
Expense   3333              1000(-)
Expense   3333                200(-)          * supposed to charge to my freight accnt 2222
below step i configured.
created new condition type ZFR1 (copying std FR1B)
put B- Delivery cost and tick 'Accrual' in the settings
maintain transaction event ZFR and posting key
assigned GL acccount to ZFR
include the condition type ZFR1 in the calculation schema, put ZFR in the field 'accrual'
Appreciate all your advise. many thanks in advance.
Rgds,
She

Hi,
Check your OBYC settings whether you have assigned the correct GL for the new trans Key.
Regards,

Change of cost during PGI

Hi all,
Geetings!
I have a scenerio. Suppose the cost of material during order creation was 100 Rs. in VPRS.
We created delivery after 15 days & during that time the standard price in material master has been changed to 120 Rs.
How system will take new cost during PGI to be posted in inventory accounting & same should reflect in billing document.
Thanks.
Regards,
Ravi

Dear Friend,
Please tell me the what pricing you have taken S or V
Standard Or Moving Average.
If your price is a Standard Price S you cannot change the same after you have created the order.
The price is determined from the standard price
So there is no procedure to change the standard price if you have used S.
In case you are using the V moving average price.
Then price is determined from the moving price feild
Which you cannot change at that time you can change the standard price.
However if in the MM side at the time of GRN if the price changes the moving average price takes care of the pricing component for the moving average price V.
Regards,
A S

Serial Number validation during Delivery Creation itself(PGI-system checks)

Process:
Sales Order PR(Purchase Order) GR( New Serial Numbers are created automatically or manually keyed in)
Once the Goods Receipt is received, we do the (SO) DELIVERYu2014SERIAL NUMBER ASSIGNMENT Post Goods Issue
Issue:
Current Serial Number Profile Management does not do a valid serial number check during DELIVERY CREATION where we do a SERIAL NUMBER ASSIGNMENT.
Only during POST GOODS ISSUE, the check happens for valid serial numbers; this is too late in the game for business as there is a time lag of 3 days from the DELIVERY CREATION and PGI.
Reason being--- We donu2019t check the following u201C Existing Stock Checku201D( which does a serial number validation during delivery creation as well)
SPRO>Plant Maintenance and Customer Service>Master Data in Plant Maintenance and Customer Service>Technical Objects>Serial Number Management>Define Serial Number Profiles
If we check this option, the business requirement to do a valid serial number check does happen during delivery creation, however we cannot create new serial numbers during Purchase Order- GOODS RECEIPT.
QUESTION:
Can we have the system check the valid serial numbers from stock during delivery creation and serial number assignment.
And Also create new serial numbers during Purchase Order- Goods Receipt.

Hi
1.In std SAP its not possible to check the serail number during Delivery creation, through enhancement it can be done.
2.During GR for PO serial numbers can be created.
Rgds
Ramesh

Item categories are re-determining based on batch split during delivery

Hello All,
During delivery item categories of bill of materilas are changing based on batch split.
Scenerio: item level bill of materials configured.
Ex: COMPUTER is main item and item category group is LUMP and item category is TAP
but it is relevent for billing as per client requirement
key board, cpu and moniter are bills of materilas item category group is NORM and item category is ZZTA
These above items are relevent for delivery and not relevent for billing
Problem: During batchsplit in delivery item category determining as "TAN" for item category ZZTA
That can be shown when we click on batch split button for sub line item (moniter, cpu) category ZZTA
all batch split line items are copied to billing and getting account determination pricng error because of TAN is relevent for billing
Could you suggest me to prevent the TAN item category for batch split in delivery
Should TAE item category to be maintained for delivery item categories
currently delivery item categories are configured as shown below
del doc type=zlf , item cat. group=lumf, higher level item cat.=tap, No default item catgory
Thanks & Regards

Hi
In the asign item cateogories use usage CHSP (Batch split) for norm and assign default item category as ZZTA. This will get determined your item category when you use batch split.
Spro --> Sales --> Sales document Item --> Assign item categories

Automating Goods issue during Delivery creation

Hi all,
We have a requirement to automate the Goods issue creation for certain type of orders when the Delivery is getting created. The orders that need to be automatically Goods issued during delivery creation are identified based on certain plants. These plants are linked to certain output type and in the output type routine is the standard program RVADEK01 with one additonal code for automating the Goods Issue creation.
We have a custom table that holds the status of orders and there is a code in user exit userexit_save_document_prepare which changes the status of the order as closed when the goods issue is done.
But when the delivery is saved, in this case when an automatic goods issue needs to happen, when the flow reaches this user exit, the output type code dosenot get executed and the Goods issue is not done and so the custom table will not be updated with the closed status. So we are in need to findout a place where we can update the status of the order in that table.
The output type code is not executed even before the other user exit userexit_save_document. The output type code gets executed and goods issue is done after the this userexit_save_document when the COMMIT statement is executed in the subroutine BELEG_SICHEN_POST in the include FV50XF0B_BELEG_SICHERN.
I need help in finding out if any user exit or badi is called after this commit statement, so that I can add my code to close the status of the order in my custom table. Just after this commit the Goods issue happens and the VBFA table gets updated with the 'R' records for goods issue.
Please let me know if anyone has any idea on this. The ultimate goal is to find some place after the goods issue is done to update the status of the order as closed in the custom table we have.
Thanks,
Packia

Dear Siva,
As informed yesterday I changed the language from DE to EN, to match the other shipping points settings in table V_TVST, this did not bring the solution.
Please let me summarize, I am really desparate here:
This is only IM related, Not WM.
Picking lists are not printed for any Shipping Point from this warehouse, this is just a small subsidiary of my customer in Finland.
Issue is not Aut. PGI.
VP01SHP has not been configured for any shipping points, still there we do get the PR except for the new shipping point.
In the deliveries of correct processed shipping points I do not find any picking output type.
Item category in new shipping is equal to Item category in already existing shipping points, so no need to config here.
There is no picking block active.
PR creation happens once I enter the pick qty in the delivery in VL02N. This is the part that we need to have automated.
Can you please try to help me out?
Tnx & regards,
Chris

Delivery Split during creation of delivery using ME2O

The system creates two delivery documents for the same vendor while using transaction ME2O. There is no delivery split criteria defined in customizing

Hi,
Please check following note
546668 - FAQ: Delivery split when creating deliveries
Also check the note 355404 - Why was there a delivery split during creation?
in this note you have attached report ZLE_ANALYZE_DELIVERY_SPLIT run it in SE38,
You will come to know why two deliveries created
Thanks

Hard Check During Delivery Creation

Hello Experts,
Need your advice. I am stuck up in a enhancement issue during delivery creation. i am working for passenger vehicle company.
Back ground Info.
the company procures chassis from vendor & builds bus body over it. there are various types of chassis & each is uniquely identified in SAP by Material No. & also mentioned in BOM created for bus. when chassis is received , equipment is created using T-code IE01. After this one more equipment is created for bus which is called BBD Serial No. The equipment for BBD serial no holds chassis serial no. My issue is at the time of creation of delivery using T-code VL01N the user puts the BBD Serial No manually in a dialog box provided, This BBD Serial No is not capturing in the importing structure IT_XLIPS of BADI "LE_SHP_DELIVERY_PROC" Method "Delivery_Final_Check".
I have to put a check during delivery creation for consumption of Chassis , if the Chassis is consumed during production phase a Mat Doc will be generated with movement Type 261. As such we don't knew the Mat Doc for Chassis Serial no Consumed during prod phase. so to derive chassis no in the BADI against which we have to check for it's consumption. The user provide BBD Serial no in a standard dialog box in VL01N.
Can we use Field Exit for this or any other BADI Should work.
Best Regards
Priyesh Shah

Hi Priyesh,
Below steps may help you to get the value of the standard dialog box provided in the screen.
1. Find the field name of the standard dialog box provided in the the screen for BBD Serial no.
2. Implement below code in the BAdI "LE_SHP_DELIVERY_PROC" method.
FIELD-SYMBOLS: <fs> TYPE BBDFIELDTYPE.
ASSIGN ('(SAPMV50A)BBDFIELDNAME') TO <fs>.
Now the field symbol <fs> will hold the value passed in the dialog box.
Please try and let me know if it is working or not.
Thanks
Gangadhar

New planned goods issue date during delivery creation due to changed route

Hello All,
I have defined 2 routes with different values for transit time and transporation lead times. I have configured routes such that in order creation - route A is determined and while delivery creation due to weight group - delivery B is determined.
Now for Route A i have maintained transit time of 3 days and Transportation lead time of 4 days and for Route B it is 1 day each.
Delivery scheduling is active for the order type.
Now when i create the order with a delivery date of say 05/24/2010 then (route A with transit time of 3 days) is determined and the planned goods issue date of 05/21/2010 is in the order.
Now while creating delivery (Route B which has transit time 1 day) is determined due to the weight group. But the planned goods issue date is still the same 05/21/2010 as in order.
I am assuming that since the route B has a route of 1 day so the planned goods issue date should be re-determined to 05/23/2010? IS there no scheduling done during delivery creation even though route and subsequently transit time has changed?
Please let me know the answer to this...
Thanks
Shobhit

Hi ,
You can use TA - MASS . Enter object type - BUS2032(for sales orders) on initial screen and select sales item data.
Next screen enter selection fields like sales order no and items. After giving order no and item range , execute and enter all new values for any item data fields. After pressing button "carry out mass change", don't forget to press save button.

Distribution of unplanned delivery costs during delivery cost LIV

Similar Messages

Maybe you are looking for