DJ F2180: don't print after ink changement and alignement

Hallo, I have changed my black ink with new no branded ink and get a good test paper for alignement. I have done the alignement but when start with printing a file with 2 green light on, the printer is blocked... no messages, no rumors, nothing.. the past days was ok, only ink red light on... what could I doing?.. In printer propriety window, the process is showed without situation..the field is empty! Thanks for the answer.

Hi gianpava,
I understand you are unable to print since changing your cartridges. Please use the following document to begin troubleshooting. The following document describe the most common combinations of blinking (flashing) lights on the control panel, followed by solutions for each combination. Find the blinking lights pattern you are experiencing, and then follow the steps to resolve the issue.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

AirPrint - iPhone 5 can not find printer after router change

AirPrint - iPhone 5 can not find printer after router change; however router is exact replacement of previous one (Zyxel, issued by Imagine wireless). AirPrint was working previously. Printer is on same network. Wireless printing working fine. Have tried rebooting prtiner, phone and router. Any suggestions?

I'd look to HP for support.
Here's an HP Airprint-related trouble-shooting page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03314085&tmp_task=solveCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=5271613
Lots more info on the HP support site.

Mx922 not working after ink changed. now computer can't find the printer! Help!

Computer said the ink was low. Changed the ink when it finally stopped because of an insufficent amount of ink. Now the computer can't detect the printer, let alone the ink change! I have read some other posts and tried to reset the drivers, that didn't work either. Now I can't even reinstall the drivers because the computer can't detect the printer. The printer is on and says that it's connected to the wireless network. It says my only other option is to connect via the USB, well Canon does not provide this model with a USB cord. So what now I have to go out and get a USB cord so that I can use my EXPENSIVE printer! That is why I paid more, so I wouldn't have to use wires!
Please if anyone has any solutions that I have overlooked please tell me! I really need to print for work.

I had a similar issue with my new Macbook Air. I ended up going and finding the bluetooth preferences (/Library/Preferences) and deleting them. Then I restarted. This time around it could see the printer.

How to know when the PRICE AFTER DISCOUNT changed and get the value

Hi,
Everything I do to see if a value changed in the grid works except for PRICE AFTER DISCOUNT
which seems to be inaccessible.
Any idea how to know when exactly this value changed and do actions accordinly ?
Also I always get 0.00 if I try to get the value of it
This works to get in the condition of a vlaue changing but I always get 0.00 as the value of the column
if (pVal.ItemUID == "38" && pVal.ColUID == COL_DISCOUNT.ToString() && pVal.EventType == BoEventTypes.et_VALIDATE && pVal.ItemChanged == true && pVal.ActionSuccess == true)
    try
        SAPbouiCOM.Matrix Matrix = (SAPbouiCOM.Matrix)SBO_Application.Forms.ActiveForm.Items.Item("38").Specific;
        SAPbouiCOM.EditText Editor = (SAPbouiCOM.EditText)Matrix.Columns.Item(COL_DISCOUNT).Cells.Item(pVal.Row).Specific;
        SBO_Application.MessageBox("Discount changed for : " + Editor.Value + "...", 1, "Ok", "", "");
    catch (Exception ex)
        SBO_Application.MessageBox(ex.Message, 1, "Ok", "", "");
And this do not even get into the condition even tought I SEE the column PRICE AFTER DISCOUNT:
if (pVal.ItemUID == "38" && pVal.ColUID == COL_PRICEAFTERDISCOUNT.ToString() && pVal.EventType == BoEventTypes.et_VALIDATE && pVal.ItemChanged == true && pVal.ActionSuccess == true)
    try
        SAPbouiCOM.Matrix Matrix = (SAPbouiCOM.Matrix)SBO_Application.Forms.ActiveForm.Items.Item("38").Specific;
        SAPbouiCOM.EditText Editor = (SAPbouiCOM.EditText)Matrix.Columns.Item(COL_PRICEAFTERDISCOUNT).Cells.Item(pVal.Row).Specific;
        SBO_Application.MessageBox("Price after discount changed for : " + Editor.Value + "...", 1, "Ok", "", "");
     catch (Exception ex)
         SBO_Application.MessageBox(ex.Message, 1, "Ok", "", "");

just idea, maybe it will works
Create one udf in row level and set there FS based on changes on price after discount and fill value what is in price after discount. Then the validation make on this field instead of standard SAP field.

Laserjet 1200 wont print after reinstalling driver and icon is checked as default printer

laserjet 1200 won't print after reinstalling driver. Icon is checked as defult printer

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

OfficeJet 4622 can't print after i changed ink cartridges

I can't print anything since i replaced the ink cartridges. I have cleaned the pin heads and alighned them. I have done the
in level test with no issues. I have downloaded all the new drivers i needed and any updates. The print report doesnt print anything except the colors down at the bottom of the page. Any ideas at all?? These are HP cartridges also.

As this is an OJ 4622, regardless if it's out of warranty I'd advise calling HP Phone Support as you may require a replacement. Can you please let us know how you get on? Thanks, Ciara
Troubleshooting steps
http://h10025.www1.hp.com/ewfrf/wc/document?cc=ie&lc=en&dlc=en&docname=c03944809
Phone no.s
http://welcome.hp.com/country/us/en/wwcontact_us.html
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Not able to see PO text in prinout when printed after any change.

When I make any change in PO (e.g. Quantity, price, delivery date), and take printout, I don't see text (item level). But when it was printed first time, I can see all texts in printout.
Pls help.

Go to SPRO-MM-Purchasing-Messages-Text for messages- Define Texts for Purchase Order
Here in the Text for document item should be set for operation 2 menas for change than it will print on the PO.
In the heading also it needs to be setup for change

Apps don't update after region change in itunes!

I have changed my free USA iTunes account region to Hungarian (and added my bank account to it).
After that my previously bought apps don't update automatically, and manually too.
They don't show up in the purchased list either.
I have tried to update Skype manually (I have the 3.7.6 for my iPad), it downloads the newest version (3.8), but still keeps the original version.
The automatic update keeps saying no updates available.
If I redownload any previously purchased it still doesn't show up in purchased list (iTunes says I have to buy again),
Please help me! I can't change my region back to USA, because I don't have any bank account in the US (Apple won't allow to "downgrade" my paid account to free).
Thanks for help
Tom from Hungary

Go to the App Store and look for the version dates. Perhaps the developers haven't updated their apps yet.

PO not printed after saving changes in ME22N

Hi,
User changed quantity on one of the line items and saved the PO but it did not create output type and trigger printout for the changed item.
I checked settings in IMG for Purchasing .EVerything is fine, messages are created for other Vendors when PO is changed in ME22n and saved.
I am not sure what could be the issue here, can someone pls help.
Thanks
Mira

Hi,
The print relavent field control does not depend upon vendors.
If for a perticular vendor it is not getting printed then check the "Fields Relevant to Printouts of Changes" table for EKPO-MENGE
1. Field is maintained
2. Print relavent indicator is ticked
3. Any routine is assigned to it if so please che the routine.
Cheers,
Satish Purandare

Audio not working in pavilion dm3 after harddrive change and operating system reload

I had hard drive failure on my Hp Pavilion dm3 and so I got a new hard drive and had the operating system reloaded and upgraded from Windows 7 Home Premium to Windows 7 Professional. My audio isn't working unless I have external speakers plugged in. I have no missing drivers in the Device Manager. The speaker icon has movement and it seems like there should be volume coming out but there's nothing.
Is it possible that while I had my machine repaired that the guy unhooked the speakers from inside the computer accidentally?
Its not easy to get into the inside of this machine the repair guys said. I did take this computer to a repair shop to get fixed because I don't know how to do all that changing. I really don't want to take it back in just yet cause Im hoping its just a driver issue.
Also before I had all this work done and computer working great, I used to have little image pop up when I would press the mute button or when I would increase or decrease the volume and I can see how high or low my volume without having to hover over the speaker icon on my taskbar. Now after the reload all that doesnt appear. The buttons work but no little image popping up and I can figure out what that driver is called.

Hi,
You can alwasy roll back the updates using Windows Restore then apply one by one or Please use the following instructions to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Printer won't print after cleaning head and contacts.

After a very long time of not printing in color, I refilled my ink cartridges. Yellow and magenta printed fine but cyan wouldn't at all. I thought it was clogged with old cyan. I took the cartridge out and cleaned the contacts with alcohol and cleaned the head with damp paper towel. I put the cartridge back in and now none of the colors print. Please help me?

anyone????
I cant even download the driver. idk why.

My printer driver has changed and it is HORRIBLE

I have been using my HP 8500A all-in-one with a few years now with absolutely no problems. Two days ago, I encountered a problem: when I tried to specify certain pages of a document to print, I would get an error message. However, if I selected to print the entire document, it would print. I assumed that my driver needed to be updated, so I downloaded from the HP website. WHAT A HORRIBLE MISTAKE THAT WAS. My scan utility has changed completely, I still can only print when I select to print an entire document. I cannot print from an Excel spreadsheet at all. I tried uninstalling the driver and re-installing. I DO NOT want to network this printer, but now each time I try to reinstall the driver, I can choose to connect via USB, but on the following pop-up, it does not give me the option to proceed. It only gives me the option to go "back" or to "skip" connecting via USB. What the heck is going on????????????????

Hi , Welcome to the HP Community!I hope you have a pleasant experience here. I'd like to help you with the driver/software issues you are experiencing with your HP Officejet Pro 8500A e-All-in-One printer and your Windows 8 machine. It sounds like your software may not be installed properly, in addition to the common issue of Windows 8.1 automatically installing drivers from Windows update. First, with the USB cable plugged in, we'll want to remove all instances of your printer in the device manager (this way when we plug the USB cable back in during the new install, it'll be seen as a new device). Open up your Start Screen. Start typing "This PC", it will come up under search results. Right click on This PC and select Manage. Click on Device Manager on the left hand side. In the main part of the window, look in the following categories for any HP entries: Imaging Devices, Other Devices, Printers, and Universal Serial Bus Controllers. If you see your HP printer listed in any of these sections, right click and select Uninstall. Keep an eye out as well for anything that says Unknown Device, and let me know if you see this at all (these are also okay to uninstall). Once all HP entries have been removed, unplug your USB and leave it unplugged. Do not plug the USB back in until the software prompts you when we re-install. Next we'll want to remove the installed printers from your Devices and Printers folder. From your desktop, either swipe in from the right to open the charms bar, or press Win key + C on your keyboard.Select settings from the bar on the right.Select Control PanelUnder Hardware and Sound, Select Devices and PrintersRight click on each icon you see for your 8500A (even if there is only one) and select Remove Device, or Delete. Once that's done, lets do a cleanboot of your computer (this will turn off all non-essential programs at startup, so if there is another program running that's hindering the installation we can avoid it).How to perform a clean boot in Windows Once the computer has restarted, try downloading the HP Printer Install Wizard to complete the installation for you. It will automatically detect your device, and install the appropriate software. Please respond to let me know if this resolves the issue.Good luck!

Error: cartridge not suitable for this printer after switch off and on

HI,
I have an officejet 6310 all-in-one. After printing and switching it off and switching it back on the next day, I get the message (translated from Dutch):
catridge error:
Rightside cartridge isnot suitable for this printer
Switching it off, removing either the right-hand cartridge or even both cartridges doesn't solve this issue. Anyone has an idea how to solve this?
Thanks in advance,
Ronald.

Hi - Not sure why the other link didn't work. Here is the URL to the document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00831987&tmp_task=solveCategory&lc=en&dlc=en&cc...
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Web Template not impacted after query changed and Transported

Hi. All.
                    We have modified the query and transported to production But query changes not been
impacted on Standard web teplate. But it works fine in Bex Analyzer.
                   Issue is there was a description was truncated earlier we used initially as short description.
Later we mapped to Medium description and modified the entire flow and loaded. It works fine.
                  Only in production we are not seeing correct description in web report and it works fine with Analyzer. So we need to ask the user as after executing the report he needs to change characterstic property from Standard to Medium.
But it would be bit inconvenience to users.
            So how can we solve this problem and why the query changes are not impacting on Web template.
Please provide your views on this issue.
Thanks & Regards
Vijay

Hi Vijay,
one reason might be if you use the option "personalization" within the web template. If users can personalize the templates changes will not be visible and have to be deleted at the time a new version of the query is provided. There are background tables for the personalization as well where you can delete all objects for this template at once if necessary.
Brgds,
Marcel

PASTA Printers Stop printing after OS upgrade and Database Upgrade

Problem Description: We recently upgraded our Development and DR environments from 10G Database to 11G version. In order to perform the Database upgrade we have also upgraded the Operating System from version 5.9 to 5.10 Solaris Sparc.
Soon After the upgrade PASTA printers which we are trying to configure are not printing at all. Even the printers which were printing fine earlier are not working now.
System Details are:
Database Version: 11.2.0.2.0.
E-Biz Version: 11.5.10.2.
OS: Sun Sparc 5.10.
applmgr:GFSDEV_gfsdev> FNDPSTAX -v
Pasta version 3.0.4.0(patch 3) - unicode/bidi printing utility.
Copyright (c) Oracle Corporation 1999-2003.
applmgr:GFSDEV_gfsdev>

Problem Description: We recently upgraded our Development and DR environments from 10G Database to 11G version. In order to perform the Database upgrade we have also upgraded the Operating System from version 5.9 to 5.10 Solaris Sparc.Have you relinked all the application executable files as per the docs referenced in this thread? -- Need clarification on Solaris 10 upgrade for E Business suite application
Soon After the upgrade PASTA printers which we are trying to configure are not printing at all. Even the printers which were printing fine earlier are not working now.Can you print to the same printers from the OS using the lp command?
How to investigate printing issues and work towards its resolution ? [ID 297522.1]
Thanks,
Hussein

DJ F2180: don't print after ink changement and alignement

Similar Messages

Maybe you are looking for