DKIM and bounce verification

Hi all, as I understand DKIM uses from: field to create the hash that later will be used for recipient. Bounce Verification inserts a tag inside from: field too. So I supposed Ironport first insert the Bounce Verification tag and then create DKIM hash, because if you create DKIM first then Bounce Verification modifies the message and the hash will not be valid.
Is this correct?
thank you
Regards
Samuel

Greetings,
BV does not modify the FROM header, only modify field. So it doesn't impact DKIM signing. The DKIM signature is inserted in the email as a DKIM signature header and the email is transmitted. The receiving MTA extracts the DKIM signature from the header and the claimed sending domain (via the Sender: or From: header) from the email. The public key is retrieved from the claimed signing domain which is extracted from DomainKeys or DKIM signature header fields.
Hope answered your question.
Cheers,
Viquar Ahmed
Customer Support Engineer

Similar Messages

Question about tagging bounce verification

Hi all,
I'm a really new beginner with IronPort and more generally with antispam. So you will maybe find my questions a little bit newbee but I need it for understand and improve myself :wink:
First I have a C150 with AsyncOS 5.5.1-014.
I use tagging outgoing mails and bounce verification and for some domains, they failed for delivery.
For example: I send a mail at [email protected] from my adress: [email protected], the client has an antispam which send a mail back to my personnal adress [email protected] with the mail adress [email protected]
What it seems to happen is that [email protected] send a mail to my tagged address (something like prvs=myadress=[email protected]) and is then rejected by the RAT. As I rejected his mail and their antispam wait for a correct answer from their mail, they dropped my mail.
So my questions are:
- When I send a send a mail (which is tagged) to an address [email protected], if another mail adress send me a mail to my tagged address, is this mail considered as a spam ?
- Does the ironport wait that only mail addresses I have send my tagged mail in return with that tag? And to dig a little more, if I received a mail to my tagged mail address I send to another people, will this mail untag and then checked by RAT ?
Thanks by advance and best regards,
Arcastor :)

Hi all,
AsyncOS 5.5.1-014.
I use tagging outgoing mails and bounce verification and for some domains, they failed for delivery.
For example: I send a mail at [email protected] from my adress: [email protected], the client has an antispam which send a mail back to my personnal adress [email protected] with the mail adress [email protected]
What it seems to happen is that [email protected] send a mail to my tagged address (something like prvs=myadress=[email protected]) and is then rejected by the RAT. As I rejected his mail and their antispam wait for a correct answer from their mail, they dropped my mail.
Thanks by advance and best regards,
Arcastor :)
Two important points here:
1) It looks like what's going on is the toto.com domain is using Sender Address Verification (SAV). When the IronPort attempts to send email, they make a connection back and see if the sender is a valid recipient for the sending domain. They should be using a null (<>) sender, which will trigger the Bounce Verification code on the IronPort.
2) You are running AsyncOS 5.5.1-014. There is a bug with Bounce Verification that was recently fixed You should upgrade: either to 5.5.1-019, or go to the very latest, 6.1.0-306.
-karl

Campaign Report Clicks, Open, and, Bounces

How does WebTools determine the number of Clicks, Opens, and, Bounces on the Campaign Reports?
Thanks to all in advance.

I would be interested in the answer to this also.

What is the difference between"export audio and "bounce"?

What is the difference between the "export audio" and "bounce" functions?
Do plug ins get saved with the created BWF(broadcast wave files)in the "export" function?
Or is the "bounce" method the required function to enable plugins embedded in BWF files?
Also I noticed that the "convert to SDII file" produces files not readable by ProTools.
It was my understanding that using the convert to SD II files via the audio bin is used, it would produce BWF files for use in Protools.And if you use symbols like / in your track names the files won't get converted or bounced!
Also would it not be cool if LE8 had a feature that could render BWF files small enough to send via internet file sharing and transfer apps, in other words a built in file transfer feature. Am I asking for too much.

Export audio is good to move the tracks to another application or computer for further editing.
Bounce renders the mix into a stereo track in 2 basic ways: PCM, i.e. uncompressed, or compressed (like AAC, mp3 etc.).
PCM can be AIFF, Broadcast WAV (even if it's written only WAV those are BWF), and SDII that's the standard file type of ProTools.
Note that PT doesn't use interleaved stereo files but two separate files for left and right channels, i.e. filename.l and filename.r and if you save in this way PT will accept those files for sure.
Uncompressed audio files cannot be compacted (in fact, that's why they're called uncompressed).
These days there are a lot of Internet services that permit to transfer several Gb (up to 5) for free.
If you are thinking of something like Digidelivery then you should put your attention towards Digi's products, not Apple's ones.
cheers
rob

Need help making ball move and bounce off of sides of JPanel

I'm currently working on a program that creates a ball of random color. I'm trying to make the ball move around the JPanel it is contained in and if it hits a wall it should bounce off of it. I have been able to draw the ball and make it fill with a random color. However, I cannot get it to move around and bounce off the walls. Below is the code for the class that creates the ball. Should I possible be using multithreads? As part of the project requirements I will need to utilizes threads and include a runnable. However, I wanted to get it working with one first and than add to it as the final product needs to include new balls being added with each mouse click. Any help would be appreciated.
Thanks
import java.awt.Color;
import java.awt.Graphics;
import javax.swing.JPanel;
public class Ball extends JPanel{
    Graphics g;
    int rval; // red color value
    int gval; // green color value
    int bval; // blue color value
    private int x = 1;
    private int y = 1;
    private int dx = 2;
    private int dy = 2;
    public void paintComponent(Graphics g){
        for(int counter = 0; counter < 100; counter++){
            // randomly chooses red, green and blue values changing color of ball each time
            rval = (int)Math.floor(Math.random() * 256);
            gval = (int)Math.floor(Math.random() * 256);
            bval = (int)Math.floor(Math.random() * 256);
            super.paintComponent(g);
            g.drawOval(0,0,30,30);   // draws circle
            g.setColor(new Color(rval,gval,bval)); // takes random numbers from above and creates RGB color value to be displayed
            g.fillOval(x,y,30,30); // adds color to circle
            move(g);
    } // end paintComponent
    public void move(Graphics g){
        g.fillOval(x, y, 30, 30);
        x += dx;
        y += dy;
        if(x < 0){
            x = 0;
            dx = -dx;
        if (x + 30 >= 400) {
            x = 400 - 30;
            dx = -dx;
        if (y < 0) {
            y = 0;
            dy = -dy;
        if (y + 30 >= 400) {
            y = 400 - 30;
            dy = -dy;
        g.fillOval(x, y, 30, 30);
        g.dispose();
} // end Ball class

Create a bounding box using the size of the panel. Each time you move the ball, check that it's still inside the box. If it isn't, then change it's direction. You know where the ball is, (x, y), so just compare those values to the boundary values.

My Mac is doing strange things: delaying between users, mouse flickering and bouncing, gets stuck with rainbow wheel flickering. I ran the appel hardware test and it detected an error: 4MOT/4/40000003:HDD-1233 Does anybody know what that means? HELP!

My imac is doing strange things:
-delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
-it gets stuck between things, the rainbow wheel appears and its just delays there forever....
-and every now and then the mouse starts flickering and bouncing wildly onscreen.
I ran the appel hardware test and it detected an error:
4MOT/4/40000003:HDD-1233
Does anybody know what that means? HELP!

WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
Hope you get it taken care of!

List of PO's where GRN is done and Invoice Verification is not done.

Gurus,
Please advice how to get the list of PO's for which Goods receipt is done and Invoice Verification is not done.
Thanks in Advance,
Nambi.N

HI
In ME2N
Tool Bar - Edit - Dynamic selections - Select Purchasing document item - Goods receiprt and Invoice receipt.
Enter values in GR and IV and then execute.
It will show the PO with GR not IV
Check it out.
Regards,
Raman

Reconciliation and data verification approaches for data in sap r/3 and bw

Hi
Cam anybody suggest what are the different reconciliation and data verification approaches to assure that BW and R/3 source data are in sync.
Thanks in advance.
Regards,
Nisha.

Hi
What you can do is, go to R/3 transaction RSA3 and run the extractor, it gives you the number of records extracted and then go to BW Monitor to check the number of records in the PSA.
if it's the same, there you go.
there is an HOW-TO Document on service market place "Reconcile Data Between SAP Source Systems and SAP BW".
Check this document as well which is very helpful.
There is another HOW-TO document "Validate infocube data by comparing it with PSA Data". this is also a good document.
Hope it helps.
Hari Immadi
http://immadi.com
SEM BW Analyst

Purchase requisition and invoice verification report

Hi,
pls. I need to display a report with purchase requisition and invoice verification pending, what I mean is an standard trx. to display purchase requisition with or without invoice verification.
Thanks for cooperation.
Regards.

hi
I guess thereis no standard report which combines both. You have to go for a Z-report. use the details FROM Txns ME5A & MB5S for your requirement.
Regards

Purchase Order Price and Invoice verification price

Hi All,
In which report we can get purchase order price and Invoice verification price in SAP standard.
Thank in Advance........
Regards,
Sanjay

Hello,
Check ME80FN transaction and select change view on the output screen and select Purchase order history.
Regards,
Shailesh

Salary and Employment Verification - UWL issue.

Hi All,
We have deployed ESS 1.41, MSS 1.41 and HRAS 1.41 business packages on Portal EP7.0 EHP1 SP7
When an Employee request for Salary and Employment Verification Letter by going thru ESS-> Benefits and Payament->Salary and Employment Verification, a workflow (std workflow WS01000045) is triggered and the task sits in inbox of HR Administrator. Task id is TS1000076. Now when we HR Admin open the workitem from R/3 inbox, it opens up a dialog box for printing the document.(PDF Form)
But these tasks are not visible under HR Administrators UWL iView in Portal. I have already checked the workflow system creation and its fine. For getting the tasks we need to maintain the task TS1000076 in SWFVISU. But we are not aware about what should be Type (JAVA webdynpro, ABAP Webdynpro, BSP etc.) and Visualization Parameters.
Could anyone guide me on these parameters and if any changes in XML config for UWL.
Regards,
Amol Ghodekar.

Below is the technical data if you are using US as country.
Technical Data
Runtime Technology
Web Dynpro Java iView
Technical Name of iView
com.sap.pct.erp.ess.employmentverif
Technical Name of Web Dynpro Application
sap.com/ess~us/EmploymentSalaryVerification
Service Key
EMPLOYEE_BENEFITPAY_EMPLOYMENTVERIF05
Available as of
SAP NetWeaver 2004s
Data Source
SAP ECC 6.0 or above
Software component
EA-HR
Support
PY-US
Support Languages
English
Refer below for details
http://help.sap.com/erp2005_ehp_04/helpdata/en/87/1e3d4150c86e24e10000000a155106/content.htm

Salary and Employment Verification in HR Administration UWL

Hi All,
We have deployed ESS 1.41, MSS 1.41 and HRAS 1.41 business packages on Portal EP7.0 EHP1 SP7
When an Employee request for Salary and Employment Verification Letter by going thru ESS-> Benefits and Payament->Salary and Employment Verification, a workflow (std workflow WS01000045) is triggered and the task sits in inbox of HR Administrator. Task id is TS1000076. Now when HR Admin open the workitem from R/3 inbox, it opens up a dialog box for printing the document (PDF Form) .
But these tasks are not visible under HR Administrators UWL iView in Portal. I have already checked the workflow system creation and its fine. For getting the tasks we need to maintain the task TS1000076 in SWFVISU. But we are not aware about what should be Type (JAVA webdynpro, ABAP Webdynpro, BSP etc.) and its Visualization Parameters.
Could anyone guide me on these parameters and if any changes in XML config for UWL.
Regards,
Amol Ghodekar.

Hi Amol,
Configuring this in SWFVISU will help with the creation of the xml file telling the task how to launch and what to launch with: See the following help documentation:
http://help.sap.com/saphelp_nw70/helpdata/EN/2c/05b15de3864040a9426788a12699b3/content.htm -
This is the documentation for action handlers.
Universal Worklist action handlers enable you to customize how a SAP Business Workflow work item is launched. So you will need to check too with the workflow specialist in your organization, but my guess would be that you would launch it with the Abap webdynpro launcher. By defining this in SWFVISU, when you press the reregister button on the webflow connector in the Universal Worklist administration, it generates the xml file and puts a definition in the file for launching the task.
Beth Maben
EP - Senior Support Consultant II
AGS Primary Support
Global Support Centre Ireland
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq ***

Username and password verification..

can you please teach me how to make a program for user name and password verification? i really really really need it for my project and im having problem with it..
pls help me..pls..pls.. tnx!
Edited by: aaneperez on Mar 2, 2008 7:30 AM

aaneperez wrote:
helping me make my homework..Then you will have to produce a specific question. Butt since you haven't even started, I guess that is out of the question.
maybe by giving me some working source code for me to study with.. thank you! more power..What do you mean "working source code"? Google'll find you lots of working code:
[http://www.google.com/search?hl=en&q=java+source+code]
This forum is intended to ask specific questions related to the programming language Java.
Good luck.

I have purchased apps for my ipod touch and they are not loading properly. They appear on the screen, however when I touch them, they do not load and bounce back to the main screen. Any suggestions on how to fix?

I have purchased apps for my ipod touch and they are not loading properly. They appear on the screen, but when you touch them, they do not open and bounce back to the main screen. Any ideas on how to fix?

Try the basics from the manual:
restart.
reset.
restore.
iPod touch User Guide (For iOS 4.3 Software)

ESS: Employment and Salary Verification

hi people,
im trying to customize the ess iview "Employment and Salary Verification". but im not really sure how this thing should work. the employee enters "Communication type" (fax or mail) and then he enters either fax-no. or adress.
now what should happen? where does this request go to? should sap automaticly send a fax or an e-mail (via sap-connect, scot, etc.) or should there be a pdf which the employee can send him self?
sorry, i cant find the customizing for this (only hrforms etc.). and the onlinehelp dosnt help me either.
regards ricky

Appreciate all your help RajK. I've used the transaction PFTC to make task TS01000076 as general task and genreated the task. Still I'm getting the same error message You are not one of the possible agents of the task".
What else I'm missing.
Thank you

DKIM and bounce verification

Similar Messages

Maybe you are looking for