DL380 SmartStart Deploy Server "Continue" button not working

Howdy.
We currently have an older Proliant DL380 server that we would like to set up and use SME Server  (Redhat Linux) on. 
When attempting to install the software, the server comes up and says "Set to Windows 2000" and tries to boot off of the A: and C: drives.   I did recall having to use the SmartStart CD for other servers and have set up this OS on them and assumed it would require the same.  I downloaded the latest version of the SmartStart software (x86 and x64), but when it's trying to load it tells me that the i686 architecture is not supported by either of those versions.
After a bit of research I found that somebody had been using v8.15 and downloaded and burnt that version to CD.  It allows me to go into the SmartStart setup utility and reboot to see the RBSU and ORCA and lets me access the raid via ACU.  However, when attempting to click "Continue" to progress to the installation of the operating system, nothing happens.  No windows or messages appear.
Is there a different version of this tool I should be using or something that will allow me to change the boot from Windows mode to Linux mode?
Thanks in advance.
Trevor Watson

Hi Vimukta,
Little late in replying to your post. I tried to generate the PDF using the same XDP template sent by you.
It is working perfectly fine for me. 
Can you please verify the code you have written on the WDDoModifyView method ? Just check the form element name once again.
I know you might have done it but just double check on this.
//@@end
public static void wdDoModifyView(IPrivateCreateView wdThis, IPrivateCreateView.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
    //@@begin wdDoModifyView
if(firstTime){
   IWDInteractiveForm iForm = (IWDInteractiveForm)view.getElement("InteractiveForm1");
   iForm.setDynamicPDF(true);
    //@@end
Step to debug :
1. Try in another desktop, try to access the same URL where you have adobe reader 8.1 is installed.
2. Just create one sample PDF with 2/3 fields and try to hide those fields on click of checkbox throgh java script. let me know if that is working or not.
3. May be you have problem with the "ReaderRights" Please check your Adobe credentials.
Actually i have tried with WebAS versiion 7.0 SP10.
I just think there is mnor problem with ADS configuration.
Cheers
Satya

Similar Messages

  • Continue Button not working when publishing to swf

    I have created a quiz in Captivate and set my pass/fail options to opening a URL on successful completion.  I need to publish it in flash (swf) but the Continue button does not open the URL.  It works perfectly if I publish the file in .exe format. 
    Here are my current settings (I've swapped my URL to the BBC website whilst testing)
    I am using version 5.5
    Can anyone help?

    Hi Rod,
    That's really helpful - thank you.  It's working for me now.
    I hope you don't mind a cheeky follow-up question?
    I'm hoping that the quiz will be available for multiple users in different locations.  Will each person have to change their Flash settings to get the link to work?
    Many thanks for your help,
    Jessica

  • Published muse website on server , some buttons not working

    I have published a test of a webpage using the trial of adobe muse .
    http://www.viajesviatamundo.com
    On internet explorer all works ok , on the rest of the browsers , safari , firefox , ...
    The first 4 countries buttons of each continent not
    working ?????
    What is this , related to the trial version , related to a bug of muse , related to what ....
    Thanks

    Hello Sam ,
    I have installed version 3.1 , exported , and all the same . The first four buttons countries of each continent , dont go . Too the facebook , twitter buttons dont go .
    On internet explorer all goes perfectly ok , on the rest of the browsers the problem happens .
    Im using Windows XP x64 , last versions of browsers , and too i have proved on a Imac safari and firefox , same problem too . Some of the links dont go .
    regards
    jose

  • Captivate 3 - Continue and Review Quiz Button Not Working

    I have just published a SCORM course in Captivate. It works perfectly fine once I've uploaded it into the LMS except one small part. I've set up the quiz so each learner is required to pass the quiz in order to complete the module. At the end of the quiz, the results page appears with two buttons (Continue and Review Quiz). Those buttons don't work.
    I set up the quiz so that learners have 2 attempts to successfully complete it. If they're unsuccesful, the continue button should direct them to the beginning of the quiz so they could retake it. If they have successfully complete, the continue button should take them to the next slide. That's not working. For some reason, the continue button only works if the learner has failed the quiz. The Review Quiz button also doesn't work. I did select the option allowing them to do so. Can someone please help?

    Hi there
    Please send me a private E-Mail message to rstone75 (at) kc (dot) rr (dot) com and advise of the exact file name of the file you are linking to.
    I'll send you back a file that you can use to test and see if the link works.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Iphone 4 volume buttons not working

    iphone 4 volume and mute buttons not working, checked all settings they are all fine and when headphones in it works??? When I take out headphones the volum buttons do not work, when phone rings or text receives only vibrates???? HELP!!!!

    This could be due to some debris or dirt inside the  headphones jack that makes the iPhone think that the headphones are connected even when they are not.
    Try to see if you can clean the jack being very careful, with canned air as sold in electronics store.  Some people have been successful by introducing and withdrawing the headphones jack several times in a row to displace whatever is in there if it is lodged in.
    Avoid introducing anything else like a pointed object.  You could damage the jack.
    If all of this does not work, I would try first resetting the phone by holding the home button and the power button together for about 15 seconds or until the whilte apple appears, then waiting until the phone resets.  If the problem continues after this, take it to an Apple Store to see what they believe should be done.

  • In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame...

    In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame. To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame ". On Chrome I get nothing but loading.

    Hi,
     This error is generally specific to Internet Explorer and has two possible causes. The most likely explanation is that your browser has unusual browser security settings. I would recommend you try
    resetting your security settings to defaults (varies by version but all essentially the same). You may also have to turn off
    Protected Mode which is enabled by default on some systems. If you’re seeing this error (or a version of it) outside Internet Explorer, you may have a server-level setting that is preventing your content from being framed.
    Reference:https://social.technet.microsoft.com/Forums/exchange/en-US/1460c5a5-6242-4402-9f6b-bc581bf56478/content-cannot-be-displayed-in-a-frame-when-trying-to-add-item?forum=sharepointgeneral
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • Lion Server DNS service not working for locally created zones. Caching working fine.

    OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
    Surely someone actually tested that DNS still worked on Lion?

    I upgraded from Snow Leopard Server to Lion Server on day 01.  I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
    I finally took a few minutes to figure out what was wrong.  After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
    The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain).  I never messed with it because it worked, but generally I would have put all of them in the same zone.
    My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv.  I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel.  This was fine in Snow Leopard.  This was failing the zone load in the updated bind for Lion Server, though.  The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
    My fix:
    1. In Server Admin, add the server to the zone "mydomain.priv".  I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
    2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
    3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server.  In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'.  Your in-addr.arpa zone name will change based on whatever your server IP address was.  My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
    4. Once the specialized zones for just the server were removed, I started the DNS up again.  Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones.  And, now, it is resolving my local machines for the mydomain.priv zone.
    YMMV.  I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
    Hope that helps.  That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

  • Lock button not working for iPhone4

    Hi All,
    My lock button not working from last 2months, I am using assistive touch for time being.
    I bought my mobile in UK 1year back, currently i am staying in India.
    My real problem is, recently i visited apple store. The guys in the store are saying, it is against to their law to serve or repair mobiles which were bought in other country..
    I think this is rediculous.. Just i need some information how to fix it or how to contact the correct person regarding this POOR service.
    Thanks
    Rajesh

    No. The warranty is only valid in the country of purchase. All service for iPhones in UAE is provided by the supported carriers. You can find a list here: http://support.apple.com/kb/ht1937
    If you did not purchase it from one of the carriers listed, then you probably purchased an illegally imported gray market phone.
    Check Settings>General>About. What does it say for Model #?

  • Help me .....My HOME button not working and responds very very slowly

    My home button not working is very slowly
    Help me pliss

    Hello Frajaisa
    I have highlighted below the troubleshooting steps for issues with the Home button slowly responding.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    The Home button is slow to respond
    If the Home button is slow to respond when exiting one application, try another application.
    If the issue exists only in certain applications, try removing and reinstalling those applications. Get further assistance in installing and troubleshooting applications.
    If the issue continues, Try turning iPhone off and then on again. If the iPhone will not restart, try resetting it.
    If the issue is still happening, try to restore the iPhone.
    Seek service is the issue is still occurring.
    Regards,
    -Norm G.

  • Frames panel: looping button not working

    Frames panel: looping button not working
    I use Fireworks MX 2004
    Frames panel: looping button:
    When I set looping to 2, it stops after 2, as it should.
    All other values, i.e. 1, 3, 4 etc will go on 'forever'.
    What's wrong?
    Thank you for your help.
    Adrian

    This is just a simple exercise.
    http://www.tudo.co.uk/testing/looping_problem.png
    http://www.tudo.co.uk/testing/looping_problem.gif
    In the png file, Frames panel, bottom left, where I can set
    looping to
    any number, including 'forever', I set the looping frequency
    in this
    case to 1. So I expect it to stop after one movement up into
    the right
    top corner and return to bottom left.
    When I play this in 'original' or in 'preview' in Fireworks,
    the
    animation moves continuously instead of stopping after one
    round. That
    is my 'problem'. Or can I not expect this to work while it is
    still in png?
    When I export it to gif, it works exactly as wanted - once
    only.
    Adrian
    Alex Mari�o wrote:
    > adrian,
    >
    > Could you post the png file online and explain exactly
    what you are
    > trying to achieve?
    >
    > alex
    >
    > adrian stock wrote:
    >
    >> Frames panel: looping button not working
    >>
    >>
    >> I use Fireworks MX 2004
    >>
    >> Frames panel: looping button:
    >>
    >> When I set looping to 2, it stops after 2, as it
    should.
    >>
    >> All other values, i.e. 1, 3, 4 etc will go on
    'forever'.
    >>
    >> What's wrong?
    >>
    >> Thank you for your help.
    >>
    >> Adrian

  • Logitech mouse buttons not working in photoshop cc 2014

    logitech mouse buttons not working in photoshop cc 2014 winds 8.1. Is this a common problem?
    I have updated the latest drivers and have a few buttons programmed with keyboard shortcuts that used to work in previous versions of Photoshop but don't work now.
    Scrolling with mouse in bridge stopped working in cc butI see it is now working.
    any ideas?

    Many Photoshop extensions are not compatible with Photoshop CC 2014 for Adobe removed support for Flash Panels in CC 2014. Many extensions panels are flash based.  Check with the developer to see if their blendmein extension works with CC 2014.
    Adobe does not maintain Photoshop so it backward compatible with prior versions of Photoshop.  This brakes things like action scripts plugins extensions etc. Keep old version of Photoshop installed....

  • IPhone 4 middle button not working

    Having problems with the iPhone 4 middle button not working anyone else with the same problem ?
    Thanks

    i have the same problem. since you're software is already iOS 5.1 go to settings>general> accessibility>the settings after triple click home, i forgot what is it called but that would help.

  • Iphone 4 Home button not working after upgrade to OS 4.3.5

    Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

    It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
    Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

  • Iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

    iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

    Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
    Regards.

  • Iphone 4 home button not working, called never fixed, then cracked screen before bringing it back again, will they blame the cracked screen if i bring it back?

    I bought an iPhone 4 less than a year ago, then one day the home button randomly stopped working, I bought the warranty so I decided to call in and see what was wrong with it. The girl said that restoring the phone would correct the problem which it did. But it is only a temporary fix, it happens more often now. So I was meaning to call in soon, but the other day my phone fell out of my pocket IN CASE from a foot height and cracked the screen. I nearly threw up. All the years I have had a phone I have never cracked or broken one, strongest screen my ***. Anyway, if I contact them again now will they fix the home button problem? or will they say that the cracked screen is obviously the cause of the home button not working? which it is not!! I don't care about the screen being cracked its not on the actual screen just on the side so its irrelevant to me. Plus I heard it is outrageosly pricey to replace.

    Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
    Regards.

Maybe you are looking for