Please help with an Indesign Post Card Problem!

Greetings! I am in need of some help! I am trying to create a post card in InDesign and then send it to a printing company. I sent my finished product to the company and they stated that it would not work out well. The font is too small, pictures are too fuzzy, dimensions are off, etc... I am confused because after reading and researching how to create a 4x6 post card in Indesign, I am still doing something wrong. Please, please help! Thank you for your time.

They would like a 4"x6" PDF. I only need to create the design for the front of the post card, not the back.
They said:
"From the PDF send earlier, I see that you are working in Adobe InDesign.
The document size I believe you are trying to achieve is a postcard 6" wide by 4" tall.
Please make sure your document size is set up accordingly within InDesign; also make sure it has a bleed edge of 0.125" on all four sides.
Make sure that your images are 300 dpi, and to size; if you have a small photo and you are trying to enlarge the image may come out "fuzzy.""
How do I set up my document as a 4"x6" and how do I make sure my photos are 300 dpi?
How do I upload a screenshot? Says the image is forbidden.
Thanks for helping!

Similar Messages

Please help me.. weird sound card problem

Ok, so i have a Tascam us 122l. I downloaded the official drivers for leopard, then updated the firmware. However, when i play flash videos the video content lags; it pauses for around a second and then starts right back up. This repeats itself through the entirety of the video, although the audio doesnt lag.
Weird thing is, when i switch to my internal soundcard the problem stops.
Whats happening here? Please help me!

It sounds like an IRQ conflict. Make sure you diable the primary and secondary channels for the IDE ports to free up the IRQ resources for the SCSI drives. If you are using a separate SCSI controller, make sure it is in the proper PCI slot and does not share IRQ's with other cards.

Can somebody please help with Javascript. 2 small problems.

Hi. I have created a dynamic PDF form with fields. I have 2 problems that i am sure someone can help me with. (I can email anyone this PDF upon request).
PROBLEM 1. In this form I have a table (actually i think its a sub form) which has 3 buttons associated with it ('Add Row', 'Delete Row' and (Clear Row'). One button adds a new row. It works but it effectively duplicates the row (and all text fields/cells contained in the row) and places this new row at the bottom of any existing rows. What i require is for this button (the button gets duplicated along with the row) to place the new row immediately below the row from where it is clicked. ie, imagine you open the document, fill out the row (at this stage there is only one) and hit the 'Add Row' button. You now have 2 Rows (great), so you fill out the second Row. Now here is my problem, if you hit the 'Add Row' button on the first Row, a new 3rd Row is added to the bottom and not in between Row 1 and Row 2.
Effectively if you have dozens of Rows filled out and you need to insert a Row for an amendment, currently it cannot be done without deleting all Rows up to the point where you want to make the addition/insertion.
PROBLEM 2. Within this Row of text/numeric fields are two fields (called 'Rate' and 'Loading') where dollar amounts are entered. As the form is filled out (the Rows can be dynamically generated and it's fields manually filled out by the user) there can potentially be dozens of Rows in a completed form and, as each Row has many text/numeric fields, one can imagine Columns forming once there is more than 1 Row. At the end of the form, totals are automatically calculated. I have created a button to reset (erase) all amounts entered into these two specific fields (Columns) but in every Row. Unfortunately there is something wrong with my script syntax as this button does not do this. ( i want this facility as when the form, which is a budget proposal, is completed i need to send two copies - one to accountants with figures and logistics and a second copy to another department whom i do not want to give the figures, so i need the button to erase figures without having to clear each cell individually).
Any help that someone can give would be much appreciated.
Please email me at
[email protected] if you would like me to send you the file.
Cheers
Bradd

Send the form to
[email protected] and I will give it a go ....include a reference back to this forum posting.
Paul

Please help with a macbook/iphone 5 problem

i have upgraded my phone to an iphone 5 and went to sync it and it says i need a new version of itunes and so i went to do that and it needs OS X 10.8 and so i go to update my macbook and that says i have no updates available but my macbook is only 10.5.8 so i rang apple and they said my macbook is too old, its only 5 years old im not happy with just giving up there surly there must be something i can do, u dont just chuck away a macbook after 5 years, please can someone help me?

You need to buy a Mac OS X 10.6 DVD.
(84935)

Please help with these indesign Questions:))

1. What happens if you hold down the shift key while creating an object using a frame tool?
2. List 3 ways to add new pages to a document.
3. List three ways to navigate a document
4. How do you apply a master page to a document page?
5. How do you set a vertical guide and a horizontal guide on a page?

There's something screwy going on with Adobe's server. The OP's time
stamp shows here (on NNTP) as 6:10 PM 10/1/08, which is correct as far
as I can tell. Last night when I first responded it was 6:43 pm. My post
shows up (again, on NNTP) as 10/2/08, 1:43 am, at which time I'm pretty
sure I was peacefully snoring.
7 hours ex post facto.
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

Please help with my Boot Camp/Windows problems

I need to install windows on to my iMac to continue a course I’m taking at uni. Sadly it’s been a nightmare so far.
I backed up all of my data and opened Boot Camp Assistant and tired to partition a section of my hard drive for windows. However it gave me an error each time I tired. After asking around I was told to buy idefrag and that should fix the problem - it didn’t. I was then told to format the hard disk and reinstall OSX. I did that and Boot Camp was now happy to partition my hard drive.
I insert a copy of legitimate copy of Windows 7 Professional (x64) and clicked the Install Windows button when Boot Camp prompted me to.
Windows installation menus open after a quick restart but quickly tells me it cant see any partitions/drives to install on.
I googled the problem read that the partition should be formatted to NTFS for windows seven to install and that OSX wont do that. I installed a free program called NTFS-3G and that formatted the partition to NTFS.
Windows now saw the drive and went through the installation process. After it has gone through its automated routine it restarts the Mac and takes me to a "Press any key to boot from CD or DVD..."
I press Enter and it takes me back to the very first installation menu and restarts the whole thing until it has once again gone through its automated routine and restarted the Mac and told me to press any key.
This happened ever time. During the install I am presented with the options of "Installing Windows" or "repairing windows". When I tried the automatic repair it told me it could find no fault.
So I started again by deleting the partition from within OSX and making a new one and installing windows and restarting but this time remove the windows 7 disk.
All this did was boot the Mac up in OSX. I then restarted the Mac and held down the options key. This presented me with the choice of booting from the Mac HDD or the windows partition. I chose the windows partition and it takes me to a black screen with a flashing line/prompt and does nothing else.
I assumed Windows 7 might not like my Mac for some strange reason so brought a copy of Vista business with SP2 (x86).
I deleting the partition from within OSX and made a new one. I began installing Vista. It told me it could only install on NTFS formatted partitions/drives.
Once again I used NTFS-3G to formatted the partition to NTFS and relaunced vista.
It installed fine and restarted itself. Once again it took me back to the first installation screen just as windows 7 did. I tried restarting without the disk (hold options again) and it took me back to the black screen with the flashing line and sat there forever.
I restarted the Mac with the OSX 10.6.1 install disk in the drive and it booted up ignoring the disk. I launched the disk from desk top and looked through the install options hoping to find some drivers or extra installs for boot camp/windows. I couldn’t see anything.
I don’t know what else to try.
I have a 21.5' iMac:
Model Name: iMac
Model Identifier: iMac10,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM101.00CC.B00
SMC Version (system): 1.52f9

Re-read in the PDF guide in Boot Camp Assist where it tells you to format the "BOOTCAMP" FAT volume when in Windows.
http://www.apple.com/support/bootcamp
But I have really only one question:
Was this an electronic school download edition? they offer students Windows 7 Pro. If this was an electronic version from school, fine, but it has to be burned at *reduced 2x speed* or it won't work, and can have various (and different for everyone) problems, BUT: it is pretty well known and semi "documented."
You do NOT need NTFS driver. That is totally wrong.
Sorry you bought Vista, I used it but once Windows 7 went Beta and then RC I've used 7 and never looked back (what Vista should/could have been but was not, even with SP2).

Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

[ETL]Could you please help with a problem accessing UML stereotype attributes ?

Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank you

Hi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana

HT201210 cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?

If you mean updae server
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Otherwise what server are you talking about

Please help with slideshow problems!

Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing. Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened". How can I save a
slideshow inprogress and be able to reopen and continue to edit and make slideshow? I want to thank anyone who can help me with this in advance as I
have gotten so frustrated that I want to just scream.
Thanks

Thanks for the help, thought I had done so but maybe not. Anyway will have another go at it, now may I ask another
question? I am trying to add audio to slideshow. I have some music I purchased thru amazon as mp3 files but I get
message no codec and when I try to add wmv I get same message. What type of file do I need and how can I add
multiple songs to one slideshow. I have one little wmv file that will go in, but it just replicates itself multiple times until
it fills slide show.
Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
Date: Sun, 26 Dec 2010 20:34:32 -0700
From: [email protected]
To: [email protected]
Subject: Please help with slideshow problems!
You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
Now you are most probably using only the Output command: that is what makes the wmv file.
You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
-- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
-- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
-- The 1st entry on that Shortcuts bar is "Save Project"
It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing. Save each Project with a unique name.
After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
Note: you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
>

My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

My "fn" button is stuck on only revealing mission control in Lion. With this problem none of my "f" keys will work nor can I hold "fn" and delete to delete text in opposite direction. Can someone please help with this?

Following the fix here worked for me:
https://discussions.apple.com/message/15680566#15680566
except my plist file was in ~/Library instead of /Library.
-Scott

HT5824 I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. Please help with turning my iMessage completely off..

I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.

If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.

HT4623 hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphon

hi..i just bought an iphone 5 yesterday 32GB..and now when i am trying to update the software..it says the following: unable to check for update/an error occurred while cheking for a software update...please help me..is it a problem in my new iphone??or it's just an temporary error in the apple software center???

Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card.

HT1338 PLEASE HELP ME I AM FACING A PROBLEM My name is Ameer. I watch youtube videos from ipad2 ( safari ) today for my first time, when i run a video and i want to pause it, i touch the screen where the video is playing to reach the pause botton that is

PLEASE HELP ME I AM FACING A PROBLEM
My name is Ameer.
I watch youtube videos from ipad2 ( safari )
today for my first time, when i run a video and i want to pause it, i touch the screen where the video is playing to reach the pause botton that is located on a bar under the video which appears when i touch the screen. Today every time i touch the screen nothing happens and i cannt pause the video nor adjusting its quality.
So plese help me fixing this problem as soon as posible.
Regards

Same problem on my ipad mini, running ios 6.0.2.
A bit more info:
-tried using YouTube in Safari on another ipad. Worked fine.
Tried reboot (sleep + home buttons for 15 seconds). Didn't fix.
-tried logging out of my YouTube account, thinking the problem was tied to my settings. Didn't fix.
-tried uninstalling all apps I downloaded since the last time YouTube worked properly. Didn't fix.
-tried watching a video in desktop mode. Can tap video screen to bring up pause okay in that mode.
There are work arounds, but the thing I want to know is why YouTube doesn't work in Safari as of a couple of days ago, and is it indicative of another more serious problem with my ipad.

Help With Third Party Wireless Cards

Hello, I am needing some help with third party wireless cards. I have purchased and installed the Linksys WMP54G wireless PCI card into my G4. From what ive seen on the discussions page here, this card is known to work with the G4s in place of the more expensive Airport Extreme card. The only problem is that my G4 doesnt even recognize that the card is in the PCI slot. Ive tryed the other PCI slots and still nothing. Previously, i have tried using a belkin and a d-link card that have been known to work in the G4s as well, and had the same problem. I am 100% sure that the card is seated correctly, and cant think of any other reason why it shouldnt detect that something is in the slot. If anyone can inform me what im doing wrong, or has any info on how to get it working, that would be great. Thanks for your time,
~Jared
Powermac G4 Mac OS X (10.3.8) 2 gb ram, 200 gb hd, dual display

Yes, i run Digidesigns audio editing program called Protools on my Mac. It uses a PCI card to import mic/line audio signals into the program from the hardware interface. I tried moving the Digidesign card and putting the wireless card in the same slot, and still nothing, although the Digidesign card works fine in the other slots. Each time i moved the Digidesign card, it showed up in the different slots, although the ones that were open did not show up at all. Only the PCI slots that are in use show up in ASP on my machine. I have the FW-800 version of the G4, so im not sure if that makes any difference. I have never erased the PRAM before, would you be able to give me directions on how to do that? Thanks a ton for your help. =)
Powermac G4 Mac OS X (10.3.8)

Please help with an Indesign Post Card Problem!

Similar Messages

Maybe you are looking for