DLL files require JRE

Hi,
I have an application which has one piece of java code which is built into a DLL file. This java code basically has code to connect to the database using JDBC thin driver. The DLL is deployed along with the application. Do we need JRE to be installed on the user's PC to make use of the application or DLL files do not require JRE to be installed on the user's PC.
Note that the java code was built into a DLL file using VJ++.

I have an application which has one piece of java
code which is built into a DLL file. This java code
basically has code to connect to the database using
JDBC thin driver. The DLL is deployed along with the
application. Do we need JRE to be installed on the
user's PC to make use of the application or DLL files
do not require JRE to be installed on the user's PC.Certainly you will need a JRE and any decent machine which accesses applet based web sites would certainly have one. If you are making a package installer, you might add a JRE installer alongwith your application.
Note that the java code was built into a DLL file
using VJ++.You answered the question that first crossed my ming. Great!!!
Rich.

Similar Messages

Crystal report .dll files required on server.

Hi.
I'm new to Crystal Report and I have a "small" problem.
I'm developing an windows app. that should be accesed from a Windows Server 2003 R2 Standard x64 Edition.
When I run my app. om the server and want to see a report created with Crystal Report, I'm told that Crystal Report runtime is not installed correct.
I have tryied to instal both CRRuntime_12_0_mlb and CRRedist2008_x64. But I still get the errormessage.
What am I doing wrong og missing.
Which .dll files are required on the Server and in my app directory??
When I run the app on my local machine the report works perfect.
Regards
Benn

What is the version of the assembly crystal decisions.crystal reports. engine.dll referenced in your app? Also, remeber that only CR 10.2 and CR 10.5 (Crystal Reports Basic for Visual Studio 2008) are 64 bit. All other versions of CR are 32 bit. See [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] article for more details.
For details re. correct runtime files see [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] wiki.
Ludek

Dll files required for developing BAPI application!

Hi,
Can anybody send me the following dll files which are required for developing BAPI application.
librfc32.dll (at least 46D, build 263)
jRFC11.dll (JDK 1.1)
jRFC12.dll (JDK 1.2 and 1.3)
Regards,
Bala Raja

Hi Deepak,
Can you tell me which JAR files you added to resolve build time errors.
I am facing the following errors after importing Std masthead from portal7.3.
Can not find the tag library descriptor for "prt:taglib:tlframework"
Can not find the tag library descriptor for "prt:taglib:tlhtmlb"
componentRequest cannot be resolved
ILocalesListService cannot be resolved
ILocalesListService cannot be resolved to a type
noBtn cannot be resolved
Syntax error on token "}", delete this token
Syntax error, insert "}" to complete Statement
The import com.sap.portal.core cannot be resolved
The method enableCloseAll() is undefined for the type NavigationEventsHelperService
The method getDynamic(String, null) is undefined for the type IUMParameters
The method getDynamic(String, String) is undefined for the type IUMParameters
yesBtn cannot be resolved
Please give your mail Id if possible.
Regards,
Sumangala

Saw.dll file is missing on Linux

Hi all,
I m trying to install OBIEE 10.1.3.2 on LinuxRedHat OS where Apache is already installed.
I have finished the installation using the Basic mode. OC4j, BI server & Presentation server have started successfully. Httpd is also running.
I have copied the analytics.war file to the html folder of the Apache server and have excecuted the jar -xvf analytics.war command too.
The default.jsp page is also specified in the .conf file.
The result of this is when I type http://localhost it shows me the default.jsp page in the Firefox. The value in this page is not parsed.
I could not find saw.dll file on the machine.
Is saw.dll file required to view answers, dashboards?
Have searched entire forum but could not find any solution.
Need help!!!

Hello Cody. I created a sequenced
Actuate 7 eSpreadsheet Designer 10.0.2 with Appv-5 Sp2. I published the package using the Powershell commands, but When I tested the app in this test machine the app never openned. The process eSpreadSheet.exe cosumed the 99% of the CPU and never
open the app. I performed a Devirtualization in another machine and it looks work properly, So I think it's a virtualization problem. Do you have any idea how to fix this?
Note: I created another sequence including all the DLLS detected in SystemX86 in the same directory where the exe file resides for this application C:\Program Files\Actuate7 as you suggested in the last entry but I'm still having the same problem.

How to convert java class to dll file for using in Microsoft Technology(.n)

hey hemmj !!!!!!
nice replying , first of all i d like to say thanks for response me so frequently..... i like such type of guy... i d never forget ur online support.
hey buddy, i ve a problem with applet application...
i m working on java chat server build on swing applet. As it is chat server, it is divided into two parts, one is server application and other is client application. I want to run this server app on the client server and the basic thing with this site is that it is running on .net platform(Microsoft). and the other app ll running on the client machine or end user. Now the problem is that this site would run only if the server app ll be run on server. This server app ll open the socket of server, which ll listen the request of the user...... So, the requirement is to convert this java sever class file into dll file and register this dll file with the IIS server.So, It run and stop with the IIS server.
I ve already search the way to convert the java class file into dll file. This is possible in such way........... below code is for the java class file...
import java.net.*;
import java.io.*;
import java.util.*;
public class chatServer
public static void main(String args[]) throws Exception
ServerSocket sersoc=new ServerSocket(1234);// Any port number above 1000 should do
// as most ports below 1000 are used by system
Vector socvec=new Vector();
String data="";int i,j=0;
BufferedReader in;
//System.out.println("Listening of port " + sersoc.getLocalPort());
//System.out.println("Waiting for connections...");
while(true)
Socket soc=sersoc.accept();
socvec.addElement(soc);
chatServerReadThread csrt=new chatServerReadThread(socvec, soc);
in=new BufferedReader(new InputStreamReader(soc.getInputStream()));
PrintStream out=new PrintStream(soc.getOutputStream());
out.println("Connected to chat server");
out.flush();
data= in.readLine();
for(i=0;i<socvec.size();i++)
soc=(Socket)socvec.elementAt(i);
out=new PrintStream(soc.getOutputStream());
out.println(data + " connected");
out.flush();
//System.out.println(data + " connected");
csrt.start(); // error is comming from here..... plz help me.
class chatServerReadThread extends Thread
Vector socvec;
PrintStream out;
chatServerReadThread(Vector socvec, Socket soc)
this.socvec=socvec;
try
out=new PrintStream(soc.getOutputStream());
}catch(Exception e){}
public void run()
try
String data;
Socket soc;
BufferedReader in;
while(true)
for(int i=0;i<socvec.size();i++)
soc=(Socket)socvec.elementAt(i);
in=new BufferedReader(new InputStreamReader(soc.getInputStream()));
if(in.ready())
try
data=in.readLine();
if(data.charAt(0) == ']')
data = in.readLine() + " exited";
//System.out.println(data);
socvec.removeElement(soc);
for(int e=0;e<socvec.size();e++)
soc=(Socket)socvec.elementAt(e);
out=new PrintStream(soc.getOutputStream());
out.println(data);
out.flush();
else
for(int e=0;e<socvec.size();e++)
soc=(Socket)socvec.elementAt(e);
out=new PrintStream(soc.getOutputStream());
out.println(data);
out.flush();
}catch(Exception e){socvec.removeElement(soc);}
}catch(Exception e){e.printStackTrace();}
first i ve made the jar file of this class
jar cvf chatServer.jar chatServer.classafter getting the jar chatServer.jar. I ve opened the .net dos prompt and
type this command which ll make dll file automatically....
> jbimp /t:library chatServer.jar
And you'll see the following output:
Microsoft (R) Java-language bytecode to MSIL converter version 1.1.4322.0
for Microsoft (R) .NET Framework version 1.1.4322
Copyright (C) Microsoft Corp 2000-2002. All rights reserved.
Created chatServer.dll
I cant get the problem origin from where it is comming, when i tried to convert it into .dll file it shown an error that, it did not recongnized the method in first class
public static void chatServerReadThread.start() method
is not recognized by .net dos prompt commnad. But when i omit this method it gets created the .dll file. This start method is basically the default method of thread class that run the thread from the same class..
By vewing the code u can visulize the thing,, i ve marked the code from where the error is comming.
Plz do it as soon as possible, i ll waiting for ur reply......
I ll be really thanking u for that....
Thanx and regards
Niraj Kumar Singh

I wonder if this will work:
jbimp /t:exe chatServer.jar
Your chatServer is an application that can be started from the commandline.
A dll is a library to be used in com, com+, other executables or ....

More than 1 ms MOMO digital IO 7358 in LabView Real-Time 8.5, error downloading EPOS dll file into RT

Hi all,
I have several problems here, I tried to google but still I could not solve the problem.
Here are my questions:
1. I tried to download an example program of EPOS which require to download a DLL file into the RT, but it failed, here's the error (I attached the picture) 01/02/2008 13:29:50.511 [error] LabVIEW:
Failed to load shared library EposCmd.dll:_VCS_GetProtocolStackName@16:C on RT target device.
From the NI.com forum,
I found a similar problem and it said by installing Network Variable Engine and Variable Client Support into the LV-RT, and I did, but still failed. Any one can help me about this?
2. I posted a question also in lavag, I think this section is more appropriate. "I
am trying to use the digital IO of the motion controller of 7358, but then I realized the delay is more that 1 ms (I checked using the oscilloscope), I attached the code (MOMO = Must On Must Off). Is this real, I mean the hardware delay between on-off is as big as this? Anyone knows the solution for this?"
Note: I am using LV-RT 8.5, PXI-7358 Motion Controller, EPOS 70/10
Thank you for any help
Message Edited by bono02 on 01-02-2008 05:47 AM
Attachments:
maxon-rt3.JPG ‏120 KB
momo1.JPG ‏55 KB

Hello bono,
1. From what I have seen, this error is usually caused by one of two things. The first is the Shared Variable software components not being installed, which is covered in this Knowledgebase. The other is due to a corruption of the ni-rt.ini file on the Real-Time controller. You can follow the steps layed out in this Knowledgebase, which gives three possible remedies. You could also try reinstalling the software (firmware) or create a PXI Uninstall disk from Measurement & Automation Explorer by selecting Tools»Remote Systems»RT PXI Disk Utilities»Create PXI Uninstall Disk. Boot the PXI Controller from the PXI Uninstall Disk, which will erase the ni-rt.ini and ph_exec.exe on the target. However, you will need to reconfigure the controller after doing this.
2. Due to the nature of the digital I/O on motion controllers, it is not surprising that you are seeing around a 1ms delay. It deals with the fact that it must update the motion controller with the new value on each control loop. This Knowledgebase gives a little more clarification regarding the 7350 specs.
Carlton
CLD

Using call library function on a dll file created in an old version of labview

So I'm trying to update an old labview program to work in labview 2012. Everything converted over just fine but labview will always crashoverwrote some while using a library function in a DLL that was compiled using labview 8.5. Labview exits, stating that it vital memory area. It passes an array of data to the library call and an empty array for output. I thought I could get around this problem by changing my code to initialize the array being passed in so that it would be large enough to hold all the expected output. Now instead of overwritting areas of memory it shouldn't, I get a pop up message that says:
fatal internal error
memorymanager.cpp line 406
8.5.1.f5
So it appears because I don't have the ability to recompile the DLL file it runs off of the 8.5 runtime instead of the more recent one. Is there any thing I can do about this?

rjpierce wrote:
So I've been trying to figure out a way around this on my own while waiting on a response. From what I'm reading, a dll created in one version of the labview runtime can't be used by a different labview runtime. Am I correct in this? I feel like I must be mistaken since that's basically the opposite of how a dll should work. If nothing else works I have access to the original code for the DLL but it requires the control and simulation toolkit. I would like to avoid having to recompile the DLL since it was put in to a DLL to avoid the need for the toolkit to begin with.
Your problem most likely is that you try to pass native datatypes to the DLL function? That only can work if the caller and callee use the same LabVIEW runtime engine. Otherwise the memory block created in the memory manager of the caller will be accessed by the memory manager in the callee and bad things happen. Instead you should define the DLL function to use standard C datatypes (Pointer to C array) and also make sure to allocate the according buffer in the caller for all output array parameters.
An even more elegant way would be to completely abandon the DLL approach and call the according functions directly in LabVIEW. Then you won't have the problems about mismatched runtime engines. Passing C array pointers to a DLL is less performant than passing native datatypes, but if you use native datatypes you have to make sure the DLL is compiled in the same LabVIEW version as the one you call it from.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Install of iTunes on PC fails due to missing MSVCR80.dll file?

The missing .dll file is in iTunes.exe.

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

[BUG] deploytk.dll file and activex control is NOT uninstalled

deploytk.dll file and activex control is NOT uninstalled, when you uninstall the latest JRE.
I have uninstalled the latest JRE, but the file deploytk.dll is still present in c:\windows\system32\ and the related activex control deploytk.dll 6.0.190.4 is loaded in IE8. Please fix this bug.
Windows Vista SP2

Unfortunately, it was *all* of my ActiveX controls that wouldn't load. That said, A user of the Info-LabVIEW list came up with the answer: reinstall the RunTime engine - wierd....
thanks,
Christopher
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

How can i import dll files in java project in eclipse?

Hi All,
How can i import or link dll files in java project in eclipse?....
dll files contains
import com.ms.com.ComLib;
import com.ms.com.Variant;
import com.ms.com.ComFailException;
import com.ms.wfc.data.AdoException;
import com.ms.wfc.data.AdoEnums;
Any idea of this please tell me.....
I am using eclipse 3.4 and JRE 1.4
Is this possible?
Please tell me!!!!!!!!!!!!!
Voddapally

iMovie cannot edit mpg files, unles they come directly from a supported camera.
I would suggest that you use a free third party app to convert it.
Get MPEG Streamclip from Squared 5, which is free.
Drag you mpg clip into MPEG Streamclip.
Then, FILE/EXPORT USING QUICKTIME
Choose Apple Intermediate Codec, and save it where you can find it. You should be able to import this file into iMovie, using the FILE/IMPORT/MOVIE command.
Note: If your file is an MPEG2 clip, you may need to purchase the Apple QuickTime MPEG2 Playback Component from Apple. MPEG Streamclip will tell you if you need this. Don't buy it unless you have to. It costs about $20. You just have to install the component. MPEG Streamclip will use it in the background.

How to call Fortran .dll file that using other library files?

Hi,
I am trying to do some arkward tasks using LabView, and I am desperately need help....
A little bit background:
1. My co-worker has some code written in Fortran, where he called other libraries (many from CERNLAB or PAW). Those stuffs are pretty powerful in mathmatical calculation and simulations.
2. In some of my LabView code, I need to call his Fortran source code in order to do some complicated calculations. I have no capablility to translate his Fortran code to Labview (or is it even possible??), so we end up with trying to use "Call library function node" where I just provide input/outputs to communicate with his code. The idea sounds simple enough?
3. We complie the Fortran code into .dll, and then specifiy the dll in "Call library function node". The first try with a very simple Fortran code, something like c = a+b*a, was sucessful. The dll file and Call lib function worked good. It's sort of proved the concept.
4. Now I am trying more complicated Fortran code (say Test.dll), which calling other library (.lib files) that using typical "call xxx(a,b,c)" line, and my nightmare started.... It seems nothing was excuted when I call Test.dll in LabView.
Questions:
1. How do LabView know if the Test.dll code needs functions from other .lib files? Do I need to copy all the .lib files to a specific folder?
2. When I create .dll file, for LabView to be able to use it, are there any special requirement on the way the .dll is compiled?
3. Seems there is mismatch btw the data type in Fortran and LabView. For example, LabView's Signed 8-bit Integer seems different with a integer in Fortran. How can i know the correlation btw data type in different langurage, i.e. LabView vs Fortran?
4. Are there any good examples that I can take a look?
I would highly appreicate any suggestions/helps!
Rgds,
Harry

You are aware that Intel Visual Fortran is the successor to Compaq Visual Fortran (I think you made a mistype with the Virtual)? So an upgrade might be at its place.
Anyhow I'm really not familiar with Fortran at all, but lib files are usually compiled into an EXE or DLL and not loaded dynamically. 1)
So there should be no problem with locating those libs. What most likely is a problem are other DLL dependencies such as any Fortran Runtime library or possibly other third party DLLs the more advanced code in your DLL might be using.
Typically most compilers can be configured to link the runtime library code statically into the DLL, as altenbach reports for the Intel compiler, otherwise you must make sure to install the redistributable Fortran Runtime Library for your compiler. Besides that you must make sure to find out what other runtime dependencies your code might have and install them.
1) One exception I know of is LabWindows CVI which allows to also load lib files dynamically. This is supposedly a legacy feature from LabWindows for DOS, which allowed that feature to simulate dynamic module loading in order to swap modules at runtime to work around the 640k memory limitation of DOS.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Were Can I SAFELY download my missing QTMovie.dll file from?

The Itunes store keeps crashing and when I try the fix suggested by Apple I find that the file that needs moving - the QTMovie.dll file is not there so I need to install it if possible from a safe site. Any Ideas PLEASE!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
iTunes no longer relies on QuickTime, though you may have some older video formats that need it. It should not be required to access the iTunes Store.
tt2

Location for dll files in weblogic server 6.1 sp2

"where to keep *.dll files in weblogic server 6.1 sp2". Application is deployed on weblogic server 6.1 sp2. Application is being integrated with webmethod to publish data. For that we need to put awssl40jn.dll in weblogic server. Could not able to locate where to put this dll file.

You can have the dll's anywhere. You just need to mention the location
in java.library.path.
For example if you have your Dll's in C:\bea\lib
You need to mention the following in your command line args:
java -Djava.library.path=C:\bea\lib ****Other Command Line Args****
weblogic.Server
Hope this helps.
-Kiran
"Dave Martin" <[email protected]> wrote in message news:<[email protected]>...
I don't see a DLL like yours in a fresh install of WLS 6.1 SP2
This is the complete list of DLLs I find in my fresh install of WLS 6.1 SP2 (starting
from the BEA home) on Windows:
/jdk131/bin/dt_shmem.dll
/jdk131/bin/dt_socket.dll
/jdk131/bin/jdwp.dll
/jdk131/jre/bin/ActPanel.dll
/jdk131/jre/bin/agent.dll
/jdk131/jre/bin/awt.dll
/jdk131/jre/bin/classic/jvm.dll
/jdk131/jre/bin/cmm.dll
/jdk131/jre/bin/dcpr.dll
/jdk131/jre/bin/dt_socket.dll
/jdk131/jre/bin/fontmanager.dll
/jdk131/jre/bin/hotspot/jvm.dll
/jdk131/jre/bin/hpi.dll
/jdk131/jre/bin/hprof.dll
/jdk131/jre/bin/ioser12.dll
/jdk131/jre/bin/java.dll
/jdk131/jre/bin/jawt.dll
/jdk131/jre/bin/jcov.dll
/jdk131/jre/bin/JdbcOdbc.dll
/jdk131/jre/bin/jdwp.dll
/jdk131/jre/bin/jpeg.dll
/jdk131/jre/bin/jpins32.dll
/jdk131/jre/bin/jpishare.dll
/jdk131/jre/bin/jsound.dll
/jdk131/jre/bin/msvcrt.dll
/jdk131/jre/bin/net.dll
/jdk131/jre/bin/NPJava11.dll
/jdk131/jre/bin/NPJava12.dll
/jdk131/jre/bin/NPJava131.dll
/jdk131/jre/bin/NPJava32.dll
/jdk131/jre/bin/NPOJI600.dll
/jdk131/jre/bin/packager.dll
/jdk131/jre/bin/server/jvm.dll
/jdk131/jre/bin/server/jvm_g.dll
/jdk131/jre/bin/verify.dll
/jdk131/jre/bin/zip.dll
/wlserver6.1/bin/fastfile.dll
/wlserver6.1/bin/iisforward.dll
/wlserver6.1/bin/iisproxy.dll
/wlserver6.1/bin/jsafe.dll
/wlserver6.1/bin/md5.dll
/wlserver6.1/bin/md5_g.dll
/wlserver6.1/bin/nodemanager.dll
/wlserver6.1/bin/oci816_7/weblogicoci37.dll
/wlserver6.1/bin/oci816_7/weblogicoxa37.dll
/wlserver6.1/bin/oci816_8/weblogicoci37.dll
/wlserver6.1/bin/oci816_8/weblogicoxa37.dll
/wlserver6.1/bin/oci817_8/weblogicoci37.dll
/wlserver6.1/bin/oci817_8/weblogicoxa37.dll
/wlserver6.1/bin/oci901_8/weblogicoci37.dll
/wlserver6.1/bin/oci901_8/weblogicoxa37.dll
/wlserver6.1/bin/proxy30.dll
/wlserver6.1/bin/proxy35.dll
/wlserver6.1/bin/proxy36.dll
/wlserver6.1/bin/stackdump.dll
/wlserver6.1/bin/stackdump_g.dll
/wlserver6.1/bin/terminalio.dll
/wlserver6.1/bin/wlenv.dll
/wlserver6.1/bin/wlntio.dll
/wlserver6.1/bin/wlntio_g.dll
/wlserver6.1/bin/wlntrealm.dll
/wlserver6.1/bin/wlntrealm_ms.dll
/wlserver6.1/uninstaller/resource/iawin32.dll
/wlserver6.1/uninstaller_servicepack/resource/iawin32.dll
manoj <[email protected]> wrote:
"where to keep *.dll files in weblogic server 6.1 sp2". Application is
deployed on weblogic server 6.1 sp2. Application is being integrated
with webmethod to publish data. For that we need to put awssl40jn.dll
in weblogic server. Could not able to locate where to put this dll file.

Does anyone have a working amtlib.dll files for Primere Pro CC and After Effects CC?

I have had problems when installing it, it s saying it is missing the amtlib.dll file (on both) I do have PS CC working, but apparently PPCC and AECC require different amtlib.dll files
Please don't post any spam links :/
Thanks!

download the installation files and properly install your apps.
you might want to uninstall and clean before doing that (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6).
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Files required when creating add-on installer exe

Dear All Gurus/Experts,
I couldn't find out and almost give up to create installer of add-on. The add-on created using VB6. It is UI API addon (I know it based on answers to several add-on topic posted to this forum). When I want to create installer exe, I use 3 files : application.exe (vb exe), AddOnInstallAPI.dll and EndInstall.exe (vb exe). In the installer software, there is a feature named include installer that could be tick or not. Is this correct ? is it only application file required to create the installer ?
I appreciate your answers. TIA
Rgds,

You can use B1DE setup wizards also for addons built with VB6 or any other
language. It just takes the name of your addon files (executables / dll / etc) and
builds for you a B1 addon setup. Just as easy.
Regarding your thoughts about easiness of producing addons. This is exactly the
objective of B1DE. It contains several wizards to generate automatically code (in
C# or VB.NET) for your addons and shield you from all the needed mechanics
related to SDK.
And the tools do not stop only with development. You can download from here
also certification tools, profilers, browsers, test automation, etc etc etc. Go
under Business One SDK tools and download them. Several thousands of SDNers
already did.

DLL files require JRE

Similar Messages

Maybe you are looking for