DLT error message Wrong volume type

Hi Everyone,
I have DVD studio Pro 3 with an ATTO UL3D. It seems that
I can copy to my Quantum 8000 (at least no error pops up) but I can't read it back. I get the error:
And would the copy to the tape be good even though I can't
read it - hopefully two seperate problems.
Common reasons that this could happen:
- DLT tape does not contain DDP or CMF format.
- Issues with the DLT drive.
- Unable to write to the target volume.
Error message:
Wrong volume type
Thanks for any help.
Powerbook G4 Mac OS X (10.3.9)

Hi, I just wanted to give people an update on my question.
I bought workgroup restrospect backup 6.1 on ebay. (very good price $17.00) I was able to see what the problem was - it was the tape. It had been formatted for a PC (I was told it was a brand new tape). When I used a real brand new DLT tape it worked beautifully. Retrospect is a great piece of software.
It is very helpful to examine a tape if your having problems to narrow down the possibilities.
Powerbook G4 Mac OS X (10.4)

Similar Messages

Error message "unsupported file type"

I know I saw this topic before, but never saw an answer. I am using mpeg streamclip...can convert all .vob files to .dv but cannot do the 1st .vob file and it is part of the home movie! I get the error message "unsupported file type". I don't have a problem with any of the other 4 .vob files.

Another thing to try is renaming it with a .htm or .html extension.
If that doesn't work either, do you have any other files from your old system? In particular, if you have your old places.sqlite file, you could use that to overwrite your new places.sqlite (bookmarks+history) file.

Overwriting framework error messages of simple types

Hi
Is it possible to overwrite the framework error messages of simple types? For example: Instead of "Enter the value in the format -2,733.34" we prefer something like "Enter the percent value in the format 0.00 to 100." or "Enter a correct percent value.".
Use case: We use for the most input fields for any numbers (telefon, amount, age, ...) the simple type "decimal", this offers following advantages:
- optional use (and framework validation) of fraction digits
- the input field has no default value (integer/long/short writes as default "0" to the input field, that is in most cases - for example post/zip code - not useful)
Otherwise decimal simple types has the disadvantage, that if the user write any letters in the (decimal) input field, the error message is as described above and so not very helpful too.
Thanks in advance
Stefan

Hi Stefan
Unfortunately seems no way to customize the error messages.
1. If the standard numeric simple type does not suit your needs, theoretically you can try to override the Java class of the standard type and add your custom messages/logic. For example, for Integer this is DdTypeInteger & DdTypeInt. Methods you need to override is format(...) and parse(...). After this in controller's code you should create a new attribute and provide your own custom type as input parameter.
I never tried this way
2. You can make the attribute as Calculated. Then in getter/setter you should put your custom formatting/parsing logic.
BR, Siarhei

I get an error message for publication type

I am using itunes producer to load a book. An error message for "publication type" appears when I get to deliver content area. I am unable to fill in that category box when I go back to that particular screen. The drop down box there shows a check mark that will disappears immediately when clicked on. I know that "digital only" or "new release" needs to be put into that box, but am unable to get any other choices for the box and can not download the book due to error message. I did enter a price in the pricing box.
Thanks for any assistance,
Don

I'm having the same problem. Have you found the answer?

Trying to upload elements 13. getting error message "wrong type of file"

After downloading the new Elements 13, I try to run it and it tries to open in Elements 11. I get an error message that it can't open because it is the wrong type of file. I using window 8.1 (64-bit). Has anyone had a similar problem? How can I resolve the issue?

Jeff,
When I purchased my Dell laptop a year ago it came loaded with Adobe Photoshop Premiere Elements 11 with photo editor and video editor. Since I really have only begun to learn to use the programs, and since I kept getting a message to upgrade now!, I decided to upgrade and learn to use edition 13 from the get-go. What I ordered was Photoshop Elements 13..order nbr AD014688152.
What is happening is that it downloads okay but when it tries to open in Elements 11 I get the error message that it can't load, wrong type of file.
My computer op system is Microsoft Windows 8.1 (64-bit). I know I downloaded the 64-bit and not 32-bit.
Perhaps I ordered the wrong upgrade?
I appreciate your help . Let me know if you need additional info.
Fred Hoerauf
Sent from my iPad

Message "Wrong partner type LS" in message control

Hi All,
I am trying to send PO's out to a middleware system. I have configured the middleware system as a LS (logical system) done all the config required for Message control.
But when I enter Output type = NEU and Medium = A (ALE) and Partner Function = LS and partner name and save the PO, I get the error "Wrong Partner type LS" in the processing log for that message. The details description says "The message record of the message control contains a partner role with a partner type LS that cannot be used here. Only the 'KU' and 'LI' partner types are allowed.". But i need to send it to partner type LS.
Am I missing anything. Please Advise.
Thanks in advance

Hi!
'By default' purchase orders can be send to vendors or plants - the two parties in the document. This is linked to the two different partner types KU and LI. Only partners of this type of a purchase order can be used to send data.
Check, if you can create a partner definition (WE20) for KU (hopefully you have less plants then vendors).
You also need a partner determination for the document - only out of this partners automatically a message output can be assigned.
Regards,
Christian

Web Serice -error message-Unaccepted content type ????

Hi all,
I created a webservice for Function module and when i am passing values in the Web Service i am getting error message ...
An error has occurred. Maybe the request is not accepted by the server:
Unaccepted content type (text/html;charset=utf-8) !
Request:POST /sap/bc/srt/rfc/sap/ZBAMS_WS_EMPLOYEE_UPDATE?sap-client=200 HTTP/1.1
Host: tybl102028.tyb.kpmgbsc.net:8002
Content-Type: text/xml; charset="UTF-8"
Connection: close
Content-Length: 657
SOAPAction: ""
<?xml version="1.0" encoding="UTF-8" ?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Header><sapsess:Session xmlns:sapsess="http://www.sap.com/webas/630/soap
/features/session/"><enableSession>true</
enableSession></sapsess:Session></SOAP-ENV:Header><SOAP-ENV:Body><ns1:ZbamsEmployeeUpdate xmlns:ns1='urn:sap-com:document:sap:soap:functions:mc-style'><BigDate>2006-04-01</BigDate><EmpId>00000012</EmpId><EndDate>2006-04-24</EndDate><WbsElement></WbsElement></ns1:ZbamsEmployeeUpdate></SOAP-ENV:Body></SOAP-ENV:Envelope>
Response:
HTTP/1.1 500 Internal Server Error
content-type: text/html;charset=utf-8
content-length: 3130
can any one help me whats wrong?
Thanks for ur time.
Murali.

Hi I am testing this using j2ee.
let me explain more information..
I created BAPI and for that bapi I crated Web Service and, and when I test from BAPI it works fine.. so now I am testing this from web service, after passing values in web service I am checking in debug mode, I have a call transaction statement in my BAPI code... once cursor comes into the call transaction statement it skips executing further statement and coming out from the debugging mode(it happens only when I go to debug from passing values in web service, and I tested call transaction giving values A and N modes), if passing values directly in BAPI then it works fine no issues.
please let me know if any ideas.
Thanks for u r time
Murali.

I cannot get a dvd to play. The error message says "media type not supported". I think it is a .m2ts. Any idea on how I can get it to play?

I cannot get a dvd to play on my computer. The error message says in iDVD is "media type not supported".
The DVD was produced with a video camera and is in HD format. I think the the format is .m2ts?
Any ideas on how to get this to play?

Check out > Mac App Store - Free MTS M2TS Converter
and/or others at > playing .m2ts format in OS X - Google Search

Error Message: "The volume for (photo file name) cannot be found"

I'm sorry but I've reviewed all the topics on this issue in Communities and quite frankly what I see to reslove this is way over my head. Forgive me if I am not as computer savvy as all of you, but we need someone to post a resolution to this in a step-by-step manner that puts it in the simpliest of terms. Doesn't anybody realize that there are new Apple users coming online all the time? How can all of us know all the tricks to this unless it is kept as basic as possible?
When I download photos from a flash drive, camera disc, or CD where the sources of my photos originate from, I try to import them into Iphoto because it's easier to see them there by toggling from photo to photo. I set up files for the photos first on the desktop or into the Pictures folder, then import them into Iphoto. I can do that on a PC and Microsoft does it flawlessly with their photo software with no additional steps. But on the Apple I get all these "volume" issues and error messages that quite frankly don't make any sense. I'm sorry but I'm about to toss my Apple computer in the trash. Why don't they make this stuff effortless?
In the error message, somebody please explain what it means to ".....wait for it to appear on the desktop then try again?" What in the **** does that mean?
My photos are loaded onto the computer. Yet even at that, many of them cant be seen in Iphoto after I dropped them into it. If foto files are on the computer on it's own hard drive, why can't Iphoto find them? This is very frustrating guys. Do I have to go through each photo individually and find them for Iphoto? It will take me years to do that.......
Help.

Guess what? The folks responding to you here are all just users like you, we don't work for Apple, so, you know, your pain is of little interest.
This has been the cause of your problems:
I checked in Iphoto preferences and the box to automatically import photos to Iphoto was unchecked.
What that means is you have connected your camera and iPhoto has imported references to your photos - links, in other words. It did not copy your files into the Library.
Then you took away the camera.
Now iPhoto is looking for the pictures.
You'll need to import the images again - but if you do you'll have masses of duplicates. So, trash the existing library, create a new one and start over.
For more on iPhoto and file management see this User Tip:
https://discussions.apple.com/docs/DOC-6361

Error Message::: The volume for "CIMG0010.JPG" cannot be found.

When I import to iphoto, I get this message:
The volume for “CIMG0010.JPG” cannot be found.
Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.
I have to press Cancel each time to resume importing.
Anyone have same problem?
Thx for your help.
Happy Holidays!
Ms. MiniMac

I too had this problem but found a very simple solution*. No rebuild needed.
For anyone else who runs into this problem here is what happened to me, and what I did about it (for reference):
I checked to make sure all software was updated, I tried different memory cards, I tried reformatting cards and used a card reader and tried straight from my camera (Canon 40D). I was downloading over 250 photos and after sitting there hitting 'Cancel' on each photo TWICE my photos finally loaded... or so I thought. When I went to open them, only the thumbnails were there! Argh!
Thankfully I didn't delete the memory card, and this time I tried downloading to a new folder on the Desktop and then importing to iPhoto. I got the same error. I tried locating each photo with the 'Find Photo' button and this opened the correct folder and after I scrolled down it had even highlighted the correct file. Unfortunately this did not work.
I tried a photo at the beginning, middle and end of the shoot to see if the memory card was somehow corrupt. Same problem with each. Eventually I did load my photos but again, only after I hit cancel for each one of the 250 photos. Interesting that after I hit 'cancel' it would download the photo.
The 'duplicate image' window came up for the 3 images I had randomly selected earlier, so I didn't think it could have been a naming problem. After all, I have been using the same camera for a while with sequential numbering enabled.
After reading Terence's reply (thank you) I was even more flustered that I would have to rebuild a database that I thought I was careful creating and backing up. Backing up... That was it!
I have over 40 gigs of photos on a USB drive from before I owned my Mac. I choose to use iPhoto to catalog the files but did not want to load them all on to my laptop and clog up useful memory.
It occurred to me that as Terence had suggested iPhoto may be trying to double check the new images against old ones, but the old ones can't be found. Even though the files were on completely different drives.
After simply plugging in my USB drive the photos downloaded to my MacBook immediately. Just to be clear, the photos were not using the same names as old ones nor were they being written to the USB drive; but iPhoto needed to have that USB drive plugged in to download photos to the laptop hard drive.
This is an easy fix, and avoids database rebuilding, but I am worried about when I go traveling etc. and need to download photos without my USB drive handy...

I am running a MacBook Pro with 10.7.5 and I downloaded the OS X 10.10.2 Update Combo, however when I try and open the package the error message "This volume is used for TimeMachine-backups". Which is not true. I´m using TimeCapsule.

I am running a MacBook Pro with 10.7.5 and I downloaded the OS X 10.10.2 Update Combo.
When I try and open the package after accepting the lincence-agreement and upon choosing the install-volume the error message appears: "This volume is used for TimeMachine-backups".
Which is not true. I´m using a timecapsule for backups.
How can I proceed?

I am using a MacBook Pro (2010) with 2.53 GHz Intel Core i5, 4GB, 1067 MHz, DDR3, Startvolume Macintosh HD.
After downloading the package and starting upgrading it asks acceptance of the license-agreement. After that it asks for the volume were to install. And when I click on the Startvolume Macintosh HD (which is the only available on the machine) it says: "The volume is already being used for Time Machine-Backups".
It doesn´t offer to skip that point or to reconfigure the Time Machine settings.
The point is that my Time machine is not and has never used the Mac HD for Backups. In the past I have used an external drive and since 05/2014 I am using a Time Capsule which is appropriately addressed in the Time Machine settings.

BPC 5.0.502 BPC Web Error Message: Exxception of Type System out of memory

In the process of updating a web page in the content library, page crashed received an error message of "Exception of type System out of memory. Exception was throw". What does this mean? We are now unable to open this sheet without receiving the prior message. Any remadies would be appreciated.

Hello,
    Did you receive this specific error message only managing that web page or for all pages?
    Did you try to stop all COM+ components on the application servers(on each if you are using more). It looks to be related to some memory problems.
    If the problem is related to a specific web page, the problem can be related to the content of that web page.
Best regards,
Mihaela

Error message: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidd

Hi All,
My scenario is Proxy to File
So in-order to test the scenario i am sending the Data from RWB using TestMessage
i have given the sender and receiver details.
and the payload i am passing is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_QAStatusReport xmlns:ns0="http://XXXX.com/xi/SARERP/IF0100_QAStatusReport/100">
 <RECORD_STRCUTURE>
 <RECORD>
 <INSP_LOT>New for EU</INSP_LOT>
 <MATNR>00000500418</MATNR>
 <SHORT_TEXT> caps SE</SHORT_TEXT>
 <PLANT>0082</PLANT>
 <BATCH>59756</BATCH>
 <VENDOR_BATCH>59756</VENDOR_BATCH>
 <INQUAL_INSP>1940</INQUAL_INSP>
 <SSQUAL_INSP>0</SSQUAL_INSP>
 <VENDOR/>
 <DATELOT_CREA>7/20/2011</DATELOT_CREA>
 <DAYS_QA>26</DAYS_QA>
 <COMMENTS>Pending Import Testing</COMMENTS>
 </RECORD>
 </RECORD_STRCUTURE>
</ns0:MT_QAStatusReport>
the error i am facing is
Error while sending message: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden
can any one suggest me how to solve the isssue
Thanks&Regards
Sai

I had received similar error , request you to also check following,
1. while sending the message from IE placed in RWB, just check the URL in the Test Message tab, its possible that this PI is installed just now and its settings are not done correctly. In this ask the owner or the BASIS to change it to correct URL.
for example it should look something like - http://sdndevdpi001:50100/sap/xi/engine?type=entry

CRVS2010 Beta - Error message wrong path to access "crdb_adoplus.dll' file

Hi,
I just upgraded my VS2008 application to VS2010 and installed the latest "cr4vs2010" and "CRforNET40_x86" package but I'm having some problems.
When I compile my application I don't get any errors but as soon as I want to show a report I get the following error:
"Could not load file or assembly 'file:///C:\Program Files\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll' or one of its dependencies. The system cannot find the file specified."
On examination I can see is that I have a "dotnet" folder but not "dotnet1", as in the error message, and the "crdb_adoplus.dll' file does exist but in "...\SAP BusinessObjects Enterprise XI 4.0\win32_x86" folder and not as per the error message.
So my question is why is VS looking in the wrong place and what can I do to fix that?
Also, I used "Dependency Walker" utility to examine "...\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crdb_adoplus.dll' file and it tells me that "MSVCR80.DLL" and "IESHIMS.DLL" files can't be found.
I'm a bit puzzled that correct path was not set as part of VS upgrade (of my application) so I would really appreciate some assistance.
Thanks,
Michael
Edited by: turbo56 on Aug 4, 2010 8:01 PM
Updated the subject line
Edited by: Don Williams on Aug 4, 2010 11:42 AM

Thanks Don for pointing me to the solution, i.e. adding the following to my app.config file solved the problem.
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
Edited by: turbo56 on Aug 5, 2010 11:51 PM

Printhead stuck to right with clicking noise. Error message: Wrong cartridge.

Multipass MP390 now has printhead stuck to the right. Error message - Check printer - wrong cartridge. When I attempt to use or clean (through additional functions-maintenance) it sounds like the printhead moves, but it doesn't and then I receive a click, click, click noise. Is this printer doomed? Any way to reset the printhead? Will the scanner/fax continue to work if the printer/copier can not?

Hi JBrennan,
Repair service via a Canon Authorized Service Facility is no longer available for this product, but please feel free to take the printer to a local service facility of your choice for repair.
We also have other options available to you; please call or email us at one of the methods on the Contact Us page for more servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

DLT error message Wrong volume type

Similar Messages

Maybe you are looking for